Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Magnetic moments of octet baryons, angular momenta of quarks, and sea antiquark polarizations

One can determine antiquark polarizations in a proton using the information from deep inelastic scattering, {beta} decays of baryons, orbital angular momenta of quarks, as well as their integrated magnetic distributions. The last quantities were determined previously by us performing a fit to magnetic moments of a baryon octet. However, because of the SU(3) symmetry our results depend on two parameters. The quantity {Gamma}{sub V}, measured recently in a COMPASS experiment, gives the relation between these parameters. We can fix the last unknown parameter using the ratio of up and down quark magnetic moments which one can get from the fit to radiative vector meson decays. We calculate antiquark polarizations with the orbital momenta of valence quarks that follow from lattice calculations. The value of the difference of up and down antiquark polarizations obtained in our calculations is consistent with the result obtained in a HERMES experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Properties of plasma sheath with ion temperature in magnetic fusion devices

The plasma sheath properties in a strong magnetic field are investigated in this work using a steady state two-fluid model. The motion of ions is affected heavily by the strong magnetic field in fusion devices; meanwhile, the effect of ion temperature cannot be neglected for the plasma in such devices. A criterion for the plasma sheath in a strong magnetic field, which differs from the well-known Bohm criterion for low temperature plasma sheath, is established theoretically with a fluid model. The fluid model is then solved numerically to obtain detailed sheath information under different ion temperatures, plasma densities, and magnetic field strengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron emission spectroscopy of DT plasmas at enhanced energy resolution with diamond detectors

This work presents measurements done at the Peking University Van de Graaff neutron source of the response of single crystal synthetic diamond (SD) detectors to quasi-monoenergetic neutrons of 14-20 MeV. The results show an energy resolution of 1% for incoming 20 MeV neutrons, which, together with 1% detection efficiency, opens up to new prospects for fast ion physics studies in high performance nuclear fusion devices such as SD neutron spectrometry of deuterium-tritium plasmas heated by neutral beam injection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Studying fast wave propagation and absorption at any cyclotron harmonic using a 2D finite element area coordinates wave equation solver

Fourier analysis in the poloidal direction is a standard ingredient in present-day 2D wave equation solvers describing radio frequency waves in hot tokamak plasmas. Although a powerful and elegant technique, Fourier analysis has the disadvantage that a large number of modes is needed to describe the field pattern on a magnetic surface if a short wavelength mode exists on any - even very small - subpart of the particle trajectory. The present paper examines the potential of a method that does not suffer from this drawback: a finite element technique relying on simple linear or cubic area base functions that are defined on irregular elementary surfaces of triangular shape. The wave equation is solved in its weak Galerkin variational form and for realistic 2D tokamak geometry, accounting for the toroidal curvature but assuming the toroidal angle is ignorable, allowing to study the wave pattern for each of the independent toroidal modes excited by the antenna individually.The locally uniform full hot plasma dielectric tensor to all orders in finite Larmor radius was adopted. As the main intended application is the study of fast wave behavior (heating and current drive) at arbitrary harmonics, the wave vector complex amplitude appearing in the dielectric tensor is determined through a local dispersion root evaluation. High frequency fast wave propagation and damping is provided as an illustration in view of possible application of this type of current drive in future high density reactor-like tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of High Energy Tail Electrons by Electron Bernstein Waves during the Current Start-up Discharges in the LATE Device

Toroidal plasma current is started and ramped up by injecting microwave power in the electron cyclotron range of frequency without induction in the LATE device. Radial scanning with hard X-ray pulse height analysis reveals the production of high energy electrons with average energy {approx}100 keV in the radial region from R = 28 cm to 40.5 cm, which are heated by electron Bernstein wave. The radial profile of photon counts in the energy range from 25 to 200 keV is very similar to that of perpendicular pressure obtained by magnetic measurement and equilibrium analysis, suggesting that a significant portion of trapped electrons exists outside the last closed flux surface. The plasma current inside the LCFS is carried mainly by passing electrons, while some portion of the outside current may be generated as a result of the toroidal precession of trapped electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-Frequency Turbulence in a Linear Magnetized Plasma

Plasma turbulence in a linear device is explored for the first time with three-dimensional global two-fluid simulations, focusing on the plasma parameters of the Large Plasma Device. Three instabilities are present in the simulations: the Kelvin-Helmholtz instability, a sheath-driven instability, and a resistive drift wave instability. The Kelvin-Helmholtz mode is shown to dominate the transport of plasma across the magnetic field. Simple scaling laws are obtained for the plasma profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SELF-SIMILAR SKELETAL STRUCTURES IN FUSION AND MATERIAL TEST DEVICES: NUMERICAL MODELING AND NEW OBSERVATIONAL DATA

The hypotheses for self-assembling of a fractal condensed matter in electric discharges and the probable role of a skeletal matter in the long-lived filamentary structures in fusion devices is studied in two directions. First, we append previous collection of respective data with recent evidences for skeletal structuring in peripheral plasmas and dust deposits in fusion and material test devices. Second, we demonstrate, via numerical modelling, the possibility of coaxial tubular structuring formation in a system of electric current filaments composed of magnetized, electrically conducting thin rods (nanodust), with an accent on self-reduction of spatial dimensionality of structuring and on the role of magnetic <threading> in such systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tests of Chiral Perturbation Theory with COMPASS

The COMPASS experiment at CERN studies with high precision pion-photon induced reactions on nuclear targets via the Primakoff effect. This offers the possibility to test chiral perturbation theory (ChPT) in various channels: Pion Compton scattering allows to clarify the longstanding question of the pion polarisabilities, single neutral pion production is related to the chiral anomaly, and for the two-pion production cross sections exist as yet untested ChPT predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ICRF Mode Conversion Flow Drive Experiments on Alcator C-Mod

We have carried out a detailed study of the dependence of ICRF mode conversion flow drive (MCFD) on plasma and RF parameters. The flow drive efficiency is found to depend strongly on the {sup 3}He concentration in D({sup 3}He) plasmas, a key parameter separating the ICRF minority heating regime and mode conversion regime. At +90 deg. antenna phasing (waves in the co-I{sub p} direction) and dipole phasing, the driven flow is in the co-I{sub p} direction, and the change of the rotation velocity increases with both P{sub RF} and I{sub p}, and scales unfavorably vs. plasma density and antenna frequency. When MCFD is applied to I-mode plasmas, the plasma rotation increases until the onset of MHD modes triggered by large sawtooth crashes. Very high performance I-mode plasmas with H{sub ITER98,y2}{approx}1.4 and T{sub e0}{approx}8 keV have been obtained in these experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High frequency fast wave current drive for DEMO

A steady-state tokamak reactor (SSTR) requires a high efficiency current drive system, from plug to driven mega-amps. RF systems working in the ion-cyclotron range of frequencies (ICRF) have high efficiency from plug to antenna but a limited current drive (CD) efficiency and centrally peaked CD profiles. The latter feature is not adequate for a SSTR where the current should be sufficiently broad to keep the central safety factor (possibly significantly) above 1. In addition, the fact that the fast wave (FW) is evanescent at the edge limits coupling, requiring high voltage operation, which makes the system dependent on plasma edge properties and prone to arcing, reducing its reliability. A possible way to overcome these weaknesses is to operate at higher frequency (10 times or more the cyclotron frequency). The advantages are: (1) The coupling can be much better (waves propagate in vacuum) if the parallel refractive index n{sub ||} is kept below one, (2) The FW group velocity tends to align to the magnetic field, so the power circumnavigates the magnetic axis and can drive off-axis current, (3) Due to the latter property, n{sub ||} can be upshifted along the wave propagation path, allowing low n{sub ||} launch (hence good coupling, large CD efficiency) with ultimately good electron absorption (which requires higher n{sub ||}. Note however that the n{sub ||} upshift is a self-organized feature, that electron absorption is in competition with {alpha}-particle absorption and that uncoupling of the FW from the lower hybrid resonance at the edge requires n{sub ||} slightly above one. The latter possibly counterproductive features might complicate the picture. The different aspects of this potentially attractive off-axis FWCD scheme are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lower hybrid wave propagation in tokamaks in weak and strong absorption regimes

Lower hybrid (LH) waves have the attractive property of damping strongly via electron Landau resonance on relatively fast tail electrons at (2.5-3)xv{sub te}, where v{sub te} = (2T{sub e}/m{sub e}){sup 1/2}. The velocity at which damping occurs depends on the non-linear balance between quasilinear diffusion and collisions. For high efficiency current drive, a low parallel index of refraction, n{sub ||}, corresponding to a high phase velocity, is chosen. Depending on the plasma electron temperature this may put the wave propagation in a multi-pass regime. In cases of low parallel refractive index, ray tracing with no SOL has been shown to have differences with experiment and collision effects in the scrape off layer may be important. Using a coupled model of the full wave code, TORLH, and the Fokker-Planck code, CQL3D, the importance of full wave effects in weak and strong absorption regimes are studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower hybrid current drive in a high density diverted tokamak

Experimental observations of LHCD at high density (n-bar{sub e}>10{sup 20}m{approx}{sup 3}) on the Alcator C-Mod tokamak are presented in this paper. Bremsstrahlung emission from relativistic fast electrons in the core plasma drops sharply in single null discharges well below the density limit previously observed on limited tokamaks ({omega}/{omega}{sub LH}{approx}2). Modeling and experimental evidence suggest that the absence of LH driven fast electrons at high density may be due to collisional absorption in the scrape off layer. Experiments show that the expected current drive density dependence is recovered for inner wall limited discharges across the range of densities scanned (0.5x10{sup 20} m{sup -3}<n-bar{sub e}<1.5x10{sup 20} m{sup -3}). Increasing T{sub e} in the periphery of the plasma (0.8<r/a<1.0) also results in a modest increase in non-thermal electron emission at high n-bar{sub e}. Ray tracing/Fokker-Planck simulations of these discharges predict the observed sensitivity to plasma position when the effects of collisional absorption in the SOL are included in the model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Estimation of the ion toroidal rotation source due to momentum transfer from Lower Hybrid waves in Alcator C-Mod

Significant ion toroidal rotation (50km/s) has been measured by X-Ray spectroscopy for impurities in Alcator C-Mod during lower hybrid (LH) RF power injection. We investigate the relation between the computed toroidal momentum input from LH waves and the measured INITIAL change of ion toroidal rotation when the LH power is turned on. The relation may depend on the plasma current and magnetic configuration. Because of the fast build up time of the electron quasilinear plateau (<1 millisecond), the electron distribution function rapidly reaches steady state in which the electrons transfer momentum to the ions. The LH wave momentum input is computed from the self consistent steady state electron distribution function and a bounce-averaged quasilinear diffusion coefficient that are obtained by iterating a full wave code (TORLH) with a Fokker Plank code (CQL3D)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Investigation of RF Sheath Rectification in ICRF and LH Heated Plasmas on Alcator C-Mod

Radio frequency (RF) rectification of the plasma sheath is being actively studied on C-Mod as a likely mechanism that leads to prohibitively high molybdenum levels in the plasma core of ion cyclotron RF (ICRF) heated discharges. We installed emissive, ion sensitive, Langmuir, and 3-D B-dot probes to quantify the plasma potentials ({Phi}{sub P}) in ICRF and lower hybrid (LH) heated discharges. Two probe sets were mounted on fixed limiter surfaces and one set of probes was mounted on a reciprocating (along the major radius) probe. Initial results showed that RF rectification is strongly dependent on the local plasma density and not on the local RF fields. The RF sheaths had a threshold-like appearance at the local density of {approx}10{sup 16} m-{sup 3}. Radial probe scans revealed that the RF sheaths peaked in the vicinity of the ICRF limiter surface, agreeing with a recent theory. The highest {Phi}{sub P}'s were observed on magnetic field lines directly mapped to the active ICRF antenna. Measurements in LH heated plasmas showed a strong {Phi}{sub P} dependence on the parallel index of refraction n{sub ||} of the launched LH waves: {Phi}{sub P} is greater at lower n{sub ||}. Little dependence was observed on the local plasma density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Overestimation of Mach number due to probe shadow

Comparisons of the plasma ion flow speed measurements from Mach probes and laser induced fluorescence were performed in the Controlled Shear Decorrelation Experiment. We show the presence of the probe causes a low density geometric shadow downstream of the probe that affects the current density collected by the probe in collisional plasmas if the ion-neutral mean free path is shorter than the probe shadow length, L g = w 2 V drift /D ⊥ , resulting in erroneous Mach numbers. We also present a simple correction term that provides the corrected Mach number from probe data when the sound speed, ion-neutral mean free path, and perpendicular diffusion coefficient of the plasma are known. The probe shadow effect must be taken into account whenever the ion-neutral mean free path is on the order of the probe shadow length in linear devices and the open-field line region of fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of RF-fields in a fusion device

In this paper the problem of scattering off a fusion plasma is approached from the point of view of integral equations. Using the volume equivalence principle an integral equation is derived which describes the electromagnetic fields in a plasma. The equation is discretized with MoM using conforming basis functions. This reduces the problem to solving a dense matrix equation. This can be done iteratively. Each iteration can be sped up using FFTs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toward a full exploitation of the helium beam edge diagnostic

In this article, extension of the He beam diagnostic, which is routinely applied in fusion devices for the characterization of the edge electronic parameters--ne and Te--and their profile, to the measurement of ion temperature and plasma rotation is proposed. The theoretical background for these new applications is reviewed and examples of their use in TJ-II are provided. Also, the shortcomings and their possible solutions are addressed. Finally, the field of application of the technique to other beam-based diagnostics is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ICRF Mode Conversion Studies with Phase Contrast Imaging and Comparisons with Full-Wave Simulations

Waves in the ion cyclotron range of frequencies (ICRF) are widely used to heat toka-mak plasmas. In a multi-ion-species plasma, the FW converts to ion cyclotron waves (ICW) and ion Bernstein waves (IBW) around the ion-ion hybrid resonance (mode conversion). The mode converted wave is of interest as an actuator to optimise plasma performance through flow drive and current drive. Numerical simulations are essential to describe these processes accurately, and it is important that these simulation codes be validated. On Alcator C-Mod, direct measurements of the mode converted waves have been performed using Phase Contrast Imaging (PCI), which measures the line-integrated electron density fluctuations. The results were compared to full-wave simulations AORSA and TORIC. AORSA is coupled to a Fokker-Planck code CQL3D for self-consistent simulation of the wave electric field and the minority distribution function. The simulation results are compared to PCI measurements using synthetic diagnostic. The experiments were performed in D-H and D-{sup 3}He plasmas over a wide range of ion species concentrations. The simulations agreed well with the measurements in the strong absorption regime. However, the measured fluctuation intensity was smaller by 1-2 orders of magnitudes in the weakly abosorbing regime, and a realistic description of the plasma edge including dissipation and antenna geometry may be required in these cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗