Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sr”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Emergence of exchange bias and giant coercive field enhancement by internal magnetic frustration in La 0.67 Sr 0.33 MnO 3 thin films

We have studied the influence of controlled defects on the magnetic properties of La 0.67 Sr 0.33 MnO 3 (LSMO) thin films. We used 100 nm thick epitaxial LSMO films, which were grown on SrTiO 3 substrates and introduced stoichiometry changes and defects using oxygen ion irradiation through nanoporous alumina masks. Oxygen irradiation through the mask creates cascades of defects in spatially-modulated regions in the plane of the LSMO film. The magnetic properties of the samples were compared before and after the irradiation. We have found that irradiation reduces the ferromagnetic ordering temperature, decreases the total magnetization, enhances the coercivity, and induces exchange bias below 50 K. The coercivity enhancement is dramatically higher below 50 K and can be associated with exchange bias. These results can be explained by the formation of Mn-rich antiferromagnetic or ferrimagnetic phases within the bombarded regions that are exchange coupled to the non-irradiated - ferromagnetic host.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An improved oxygen reduction reaction activity and CO 2 -tolerance of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ achieved by a surface modification with barium cobaltite coatings

Solid oxide fuel cells (SOFCs) cathode often suffers from the poisoning effect of the contaminants commonly encountered in air such as CO 2 . Here we report an effective approach to enhancing the activity and CO 2 tolerance of the state-of-the-art La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) cathode enabled by a coating of BaCoO 3-δ (BCO), as verified by the electrochemical testings, Raman analyses, and density functional theory calculations. When surface modified with a thin-film BCO coating, LSCF displays a much enhanced ORR activity and an improved durability against CO 2 . For example, anode supported SOFCs with the LSCF cathode coated with BCO coatings show a remarkable peak power density (Pmax) of 0.41 Wcm -2 and a significantly reduced degradation rate in current density of ~0.08% h -1 at 0.8 V and 700 °C for a period of 300 hs when humidified H2 (with 3 vol%H2O) was used as fuel and air with 8 vol% CO 2 as oxidant. The demonstrated performance is improved when compared with those of the cells with a blank LSCF electrode (a Pmax of ~0.36 Wcm -2 and a degradation rate of ~0.15% h -1 ) under the same conditions. Furthermore, the adsorption energy calculations suggests that BCO coating makes CO 2 adsorption much weaker than LSCF (-0.54 eV versus -1.07 eV).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

La–Sr–Co oxide catalysts for oxygen evolution reaction in anion exchange membrane water electrolyzer: The role of electrode fabrication on performance and durability

Anion exchange membrane water electrolysis is an attractive technology for low-cost generation of “green” hydrogen by combining the use of noble metal-free catalysts with pure water feed. By thus addressing main drawbacks of the liquid alkaline electrolysis and proton exchange membrane water electrolysis, anion exchange membrane water electrolysis stands an excellent chance of replacing the two technologies. The development of active and stable platinum group metal (PGM)-free catalysts for oxygen evolution reaction (OER) is crucial for making anion exchange membrane water electrolyzers (AEMWEs) practical. For this work, we synthesized, characterized and tested two La–Sr–Co oxide-based OER catalysts. First, we characterized the catalysts by XRD, SEM, and N 2 physisorption and assessed their OER activity in a three-electrode cell. Next, we focused on electrode fabrication, demonstrating the importance of catalyst-ink application to the porous transport layers (PTLs) and a key role of adding a binder to the catalyst ink to prevent the catalyst detachment from the PTL in pure water. We tested three membrane electrode assemblies prepared using different formulations of the anode catalyst ink. The results show that the optimum ink formulation is essential for the performance on pure-water feed by maximizing OH - conductivity of the catalyst layer and catalyst-membrane interface.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Crystal structure, magnetic properties and bonding analysis of M 3 Pt 23 Ge 11 (M=Ca, Sr, Ba and Eu)

The properties of Pt-based materials can be intriguing due to the importance of spin-orbit coupling for Pt. Herein, we report four new phases with formulas M 3 Pt 23 Ge 11 (M ​= ​Ca, Sr, Ba and Eu), which adopt the same structure type as Ce3Pt23Si11. Magnetic susceptibility measurements indicate that none of the phases is superconducting above 1.8 ​K, while for Eu 3 Pt 23 Ge 11 ferromagnetic ordering is observed at ~ 3 ​K. The low Curie temperature for that material compared to that of Eu 3 Pt 23 Si 11 may be due to its larger Eu–Eu distance. One potential factor that destabilizes the structure of other rare-earth based M 3 Pt 23 Ge 11 is demonstrated through COHP calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structure and properties of the Sr 2 In 1-x Sn x SbO 6 double perovskite

A series of n -type oxide double perovskite semiconductors, Sr 2 In 1-x Sn x SbO 6 (0 ≤ x ≤ 0.3) has been synthesized; Sn 4+ partially substitutes for In 3+ . 121 Sb and 119 Sn Mössbauer spectroscopy are employed to investigate the B-site cation ordering because this issue cannot be resolved by conventional diffraction techniques alone. Rigid ordering between In 3+ /Sn 4+ and Sb 5+ sites is revealed by the spectroscopic method, and hence in combination with the structural parameters extracted from the XRD structural refinements, the crystallographic structure of this series of compounds is depicted. Furthermore, the temperature dependent magnetic susceptibilities, band gaps, and carrier type are characterized, and the calculated band structure is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Physical origins of the varying performance and unusual transport behaviors among thermoelectric A Mg 2 Sb 2 materials ( A = Ca, Sr, Sm, Yb, and Mg)

Contrary to the similar thermoelectric performance among both AZn 2 Sb 2 and AMg 2 Bi 2 compounds, their isostructural counterparts, AMg 2 Sb 2 , can exhibit thermoelectric figure of merit values that vary by orders of magnitude with different A elements. Here, we reveal physical origins accounting for the significantly differing performance among AMg 2 Sb 2 -based compounds (A = Ca, Sr, Sm, Yb, and Mg) through comprehensive analyses, where it is shown that the dispar- ities in performance at the macroscale essentially originate from the widely varying activation energies that equal amounts of dopant can induce. Meanwhile, a few unusual transport behaviors regarding electrical conductivity, carrier concentration, or lattice thermal con- ductivity among these compounds have been identified, and we also present their rationales in depth. Furthermore, this mechanism-focused study can not only promote further understanding of the complex transport behaviors in condensed matter but be instrumental in rationally tun- ing the physical properties of materials as well.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Qualifying LaBr3:Ce+Sr detector performance for the Mu2e experiment at Fermilab Using the ELBE Accelerator

A LaBr3:Ce+Sr detector will be used to measure the stopped muon captures at the Mu2e experiment at Fermilab. It has been benchmarked in a test beam experiment performed at the ELBE electron accelerator located at the Helmholtz-Zentrum Dresden-Rossendorf, Germany. ELBE’s pulsed bremsstrahlung beam line was set to deliver an average γ -ray energy of between 4–5 MeV. The detector response was mapped to match Mu2e beam conditions, including rates up to 1 Mcps, energy flux, and time structure. A radioactive calibration source was used to mimic the characteristic 1808.7 keV γ -ray, emitted during the atomic muon nuclear capture in the Mu2e aluminum stopping target. The detector energy resolution was measured as a function of the average energy flux: up to 1 TeV/s for 0.34 s, the steady-operation beam-on time and up to 4 TeV/s for 5 ms to get a conservative estimate of the effect of high intensity Mu2e beam fluctuations. The PMT gain variation as a function of the beam spill length and average intensity has been parametrized and corrected for. When a PMT gain correction corresponding to the average beam-spill intensity is applied, the residual effect of beam intensity fluctuations around the average degrades the energy resolution, σ E γ /E γ , at 1808.7 keV from 0.66% to 0.83%.

Huang, Shihua [Purdue U., West Lafayette]↗
DOE OSTI2024

Air separation and N 2 purification with Ba 0.15 Sr 0.85 FeO 3-$δ$ via a two-step thermochemical process

Thermochemical air separation to produce high-purity N 2 was demonstrated in a vertical tube reactor via a two-step reduction–oxidation cycle with an A-site substituted perovskite Ba 0.15 Sr 0.85 FeO 3–δ (BSF1585). BSF1585 particles were synthesized and characterized in terms of their chemical, morphological, and thermophysical properties. A thermodynamic cycle model and sensitivity analysis using computational heat and mass transfer models of the reactor were used to select the system operating parameters for a concentrating solar thermal-driven process. Thermal reduction up to 800 °C in air and temperature-swing air separation from 800 °C to minimum temperatures between 400 and 600 °C were performed in the reactor containing a 35 g packed bed of BSF1585. The reactor was characterized for dispersion, and air separation was characterized via mass spectrometry. Gas measurements indicated that the reactor produced N 2 with O 2 impurity concentrations as low as 0.02 % for > 30 min of operation. Additionally, a parametric study of air flow rates suggested that differences in observed and thermodynamically predicted O 2 impurities were due to imperfect gas transport in the bed. Temperature swing reduction/oxidation cycling experiments between 800 and 400 °C in air were conducted with no statistically significant degradation in N 2 purity over 50 cycles.

14 SOLAR ENERGY↗
DOE OSTI2021

Air separation via a two-step solar thermochemical cycle based on (Ba,La) x Sr 1-x FeO 3-δ : Thermodynamic analysis

A two-step solar thermochemical cycle was considered for air separation to produce N2 based on (Ba,La) x Sr 1-x FeO 3-δ perovskite reduction/oxidation (redox) reactions for A-site fractions of 0 ≤ x ≤ 0.2. The cycle steps encompassed (1) thermal reduction and O 2 release via concentrated solar input and (2) re-oxidation with air to uptake O 2 and produce high-purity N 2 . Thermogravimetry at temperatures between 400 and 1100 °C in atmospheres of 0.005 to 90% O 2 /Ar at 1 bar was performed to measure equilibrium nonstoichiometries. The compound energy formalism was applied to model redox thermodynamics for both Ba 2+ and La 3+ substitution. Non-linear regression was used to determine the empirical parameters based on the thermogravimetric measurements. The model was used to define partial molar reaction enthalpies and entropies and predicted equilibrium oxygen nonstoichiometry as functions of oxide stoichiometry, site fraction, temperature, and O 2 partial pressure. The thermodynamic analysis showed the materials are appealing for air separation at temperatures below 800 °C.

42 ENGINEERING↗
DOE OSTI2025

Isoconversional Kinetic Analysis of Oxygen Desorption for Sr 0.75 Ca 0.25 FeO 3-δ Perovskite in Dry and Steam-Based Environments

The desorption kinetics of Sr 0.75 Ca 0.25 FeO 3-δ perovskite material are examined in both dry and steam-based environments using redox gaseous products of a laboratory-scale fixed bed. First, desorption kinetics associated with the dry environment are proposed based on Friedman’s isoconversional method. It is found from the reconstructed reaction model that the desorption kinetics of this perovskite are controlled by a three-step mechanism, where hypothetically, the phase-boundary reaction rapidly prevails first, followed by diffusion and/or nucleation, and finally, unimolecular decay or random nucleation-controlled reaction. Subsequent analyses of the Arrhenius parameters indicated that both the early and later desorption stages, respectively, controlled by the phase boundary and unimolecular/random nucleation reactions, are associated with low energetic demand. In contrast, a high energetic penalty is required for the diffusion/nucleation reaction. Further, a satisfactory a priori verification of the proposed kinetics suggested that the three-step reaction mechanism reasonably describes the desorption of this perovskite in a dry environment. With the presence of steam in the desorption environment, oxygen production is substantially inhibited, but the hypothetical three-step mechanism is still found to control the desorption. Meanwhile, the primary effects of the steam on these mechanisms include the widening of the conversion extent associated with the diffusion/nucleation reaction, along with a higher energetic demand compared to the dry environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
DOE OSTI2024

Lattice Effect on the Superexchange Interaction in Antiferromagnetic Bi 2.1 Sr 1.9 CaCu 2 O 8+δ

By employing Raman scattering and X-ray diffraction techniques on antiferromagnetic Bi 2.1 Sr 1.9 CaCu 2 O 8+δ within the same pressure conditions, we tracked the evolution of the two-magnon spectrum and structural parameters under pressures of up to nearly 30 GPa. Consequently, we established the relationship between pressure, in-plane lattice parameter d, and superexchange interaction J as J ~ d -(6.6±0.2 ). Within the examined pressure range, this compound did not exhibit superconductivity, as determined by a sensitive magnetic measurement technique. Additionally, we observed phonon anomalies, suggesting possible disorder effects in Bi-O layers and reduced charge transfer from these layers, particularly above 10 GPa. Finally, we discuss the impacts of pressure and chemical doping on J and the structure, along with their implications for superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Multifunctional Metal–Oxide Nanocomposite Thin Film with Plasmonic Au Nanopillars Embedded in Magnetic La 0.67 Sr 0.33 MnO 3 Matrix

Searching for multifunctional materials with tunable magnetic and optical properties has been a critical task toward the implementation of future integrated optical devices. Vertically aligned nanocomposite (VAN) thin films provide a unique platform for multifunctional material designs. In this work, a new metal–oxide VAN has been designed with plasmonic Au nanopillars embedded in a ferromagnetic La 0.67 Sr 0.33 MnO 3 (LSMO) matrix. Such Au–LSMO nanocomposite presents intriguing plasmon resonance in the visible range and magnetic anisotropy property, which are functionalized by the Au and LSMO phase, respectively. Furthermore, the vertically aligned nanostructure of metal and dielectric oxide results in the hyperbolic property for near-field electromagnetic wave manipulation. Such optical and magnetic response could be further tailored by tuning the composition of Au and LSMO phases.

36 MATERIALS SCIENCE↗
DOE OSTI2020

LaCrO 3 -Coated La 0.6 Sr 0.4 Co 0.2 Fe0.8O3–δ Core–Shell Structured Cathode with Enhanced Cr Tolerance for Intermediate-Temperature Solid Oxide Fuel Cells

La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) is a common cathode material for intermediate temperature solid oxide fuel cells due to its excellent oxygen reduction reaction catalytic activity. However, the Cr-poisoning effect is a severe issue causing its electrochemical performance degrada-tion. To develop a LSCF-based cathode with excellent Cr-tolerance, LaCrO 3 -coated LSCF core-shell structured (LCr@LSCF) cathode was prepared via solution infiltration method. After coated by LCr shell, the long-term stability and Cr-tolerance were obviously improved, at the price of sacrificing some electrochemical performance. As a result, the development of LCr@LSCF cathode with eye-catching Cr-tolerance is of great significance to the commercialization of LSCF.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning Irreversible Magnetoresistance in Pr 0.67 Sr 0.33 MnO 3 Film via Octahedral Rotation

Herein, the oxygen octahedral rotation around the out-of-plane axis is explored to study its effect on metastable status, magnetic cluster glass in manganite. The antiphase rotation around the out-of-plane axis (TiO 6 α Ο α Ο c – ) of SrTiO 3 enhances the Mn–O bond anisotropy along in-plane and out-of-plane directions and weakens the ferromagnetic interactions in a 12 nm Pr 0.67 Sr 0.33 MnO 3 film on the (001) SrTiO 3 substrate, which together promote the formation of magnetic cluster-glassiness and enlarges the irreversible magnetoresistance (MR) effect with enhanced relaxation time of charge carriers. The effect of TiO 6 α Ο α Ο c – in the SrTiO 3 substrate on material properties is obvious with a large irreversible MR effect for thin films, which fades away with the increase in film thickness. At 10 K, the irreversible MR is 0.91 for the 12 nm film and 0.22 for the 30 nm film. This work extends current understanding on interfacial coupling to metastable status and could help explore other systems in the perovskite structure with octahedral rotation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Ferroelectric Self-Polarization Controlled Magnetic Stratification and Magnetic Coupling in Ultrathin La 0.67 Sr 0.33 MnO 3 Films

Multiferroic oxide heterostructures consisting of ferromagnetic and ferroelectric components hold the promise for nonvolatile magnetic control via ferroelectric polarization, advantageous for the low-dissipation spintronics. Modern understanding of the magnetoelectric coupling in these systems involves structural, orbital, and magnetic reconstructions at interfaces. Previous works have long proposed polarization-dependent interfacial magnetic structures; however, direct evidence is still missing, which requires advanced characterization tools with near-atomic-scale spatial resolutions. Here, extensive polarized neutron reflectometry (PNR) studies have determined the magnetic depth profiles of PbZr 0.2 Ti 0.8 O 3 /La 0.67 Sr 0.33 MnO 3 (PZT/LSMO) bilayers with opposite self-polarizations. When the LSMO is 2–3 nm thick, the bilayers show two magnetic transitions on cooling. However, temperature-dependent magnetization is different below the lower-temperature transition for opposite polarizations. PNR finds that the LSMO splits into two magnetic sublayers, but the inter-sublayer magnetic couplings are of opposite signs for the two polarizations. Near-edge X-ray absorption spectroscopy further shows contrasts in both the Mn valences and the Mn–O bond anisotropy between the two polarizations. Finally, this work completes the puzzle for the magnetoelectric coupling model at the PZT/LSMO interface, showing a synergic interplay among multiple degrees of freedom toward emergent functionalities at complex oxide interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanisms of Hysteresis and Reversibility across the Voltage-Driven Perovskite–Brownmillerite Transformation in Electrolyte-Gated Ultrathin La 0.5 Sr 0.5 CoO 3−δ

Perovskite cobaltites have emerged as archetypes for electrochemical control of materials properties in electrolyte-gate devices. Voltage-driven redox cycling can be performed between fully oxygenated perovskite and oxygen-vacancy-ordered brownmillerite phases, enabling exceptional modulation of the crystal structure, electronic transport, thermal transport, magnetism, and optical properties. The vast majority of studies, however, have focused heavily on the perovskite and brownmillerite end points. In contrast, here we focus on hysteresis and reversibility across the entire perovskite ↔ brownmillerite topotactic transformation, combining gate-voltage hysteresis loops, minor hysteresis loops, quantitative operando synchrotron X-ray diffraction, and temperature-dependent (magneto)transport, on ion-gel-gated ultrathin (10-unit-cell) epitaxial La 0.5 Sr 0.5 CoO 3-δ films. Further, gate-voltage hysteresis loops combined with operando diffraction reveal a wealth of new mechanistic findings, including asymmetric redox kinetics due to differing oxygen diffusivities in the two phases, nonmonotonic transformation rates due to the first-order nature of the transformation, and limits on reversibility due to first-cycle structural degradation. Minor loops additionally enable the first rational design of an optimal gate-voltage cycle. Combining this knowledge, we demonstrate state-of-the-art nonvolatile cycling of electronic and magnetic properties, encompassing >10 5 transport ON/OFF ratios at room temperature, and reversible metal-insulator-metal and ferromagnet-nonferromagnet-ferromagnet cycling, all at 10-unit-cell thickness with high room-temperature stability. This paves the way for future work to establish the ultimate cycling frequency and endurance of such devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Fine Symmetry Breaking in High-Temperature Superconductor Bi 2 Sr 2 CaCu 2 O 8+δ with Angle-Resolved Nonreciprocal Transport

After decades of research, symmetry breaking in high-temperature cuprate superconductors remains a key issue to resolve and is relevant to understanding their exotic quantum phases. In the prototypical cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212), the possible symmetry breaking has been mostly examined microscopically with scanning tunneling microscopy and photoemission spectroscopy. However, macroscopic evidence and the direct implications for electronic transport have remained elusive. Using superconductivity-enhanced nonreciprocal transport, we report macroscopic evidence of inversion symmetry breaking in Bi2212. While the inversion symmetry breaking is subtle, its effect on nonreciprocal transport is significantly enhanced by the vortex motion during the superconducting transition, leading to a robust manifestation of inversion symmetry breaking in macroscopic transport. Combining angle-resolved nonreciprocal transport and 3D tight-binding model calculations, we derive that the inversion symmetry breaking is due to subtle crystal distortions that give rise to both in-plane and out-of-plane polar axes. Our work not only establishes nonreciprocal transport as a sensitive macroscopic probe to provide electrical transport-based evidence of fine symmetry breaking in Bi2212, but also paves the way for novel device applications such as high-temperature superconducting diodes and superconducting spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗