Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simplified Simulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Computation of electron density in high altitude re-entry flows

The direct simulation Monte Carlo (DSMC) method has been modified to deal with the very small degree of ionization that occurs in the early stages of the 'communications blackout' phase of re-entry. The simplified model of the process assumes that the ionization is entirely a consequence of the reaction N + O yields NO(+) + e-. The measurements from the RAM C-II test vehicle at an altitude of 81 km have been chosen as the test case. It was found that the form of the electron distribution along the shock layer was in agreement with the measurements. That normal to the surface was also in agreement with the measurements if the surface is regarded as fully catalytic. However, quantitative agreement for the fully catalytic case requires a reaction rate about an order of magnitude greater than those generally associated with this reaction.

Bird, G. A.↗
NASA NTRS2024

Vertiport Management from Simulation to Flight: Continued Human Factors Assessment of Vertiport Operations

The Urban Air Mobility concept envisions a new future for transportation in urban environments, primarily focused around vertiport operations. A vertiport refers to an identifiable ground or elevated area used for the vertical takeoff and landing of an aircraft. One critical role within vertiport operations that has been proposed but is under-researched is the vertiport manager. The vertiport manager is expected to manage the ground-to-air operations at the vertiport, but their precise responsibilities, tasks, and challenges are currently undefined. The High Density Vertiplex Subproject at NASA is responsible for developing and testing technologies, concepts, and architectures that will support the infrastructure needed for terminal environments around vertiports. Our previous work investigated ground control station operators performing simulated and live flight operations within a remote operations environment. In the current study, we extended from our previous work to explore the role of a vertiport manager. Specifically, we investigated five participants serving as a vertiport manager across both simulated and live flight operations. We performed multiple knowledge elicitation techniques, a thematic content analysis of qualitative data, and naturalistic observations to create a list of insights, design and training recommendations, and a simplified cognitive task diagram of the vertiport manager’s primary task. Findings from this study are discussed within the context of the current debate on the degree to which this role should be automated. A third alternative is suggested to allow a human vertiport manager to be successful by teaming with increasingly autonomous systems, designing the role to improve safety and efficiency of Urban Air Mobility operations.

AAM↗
NASA NTRS2024

Vertiport Management from Simulation to Flight: Continued Human Factors Assessment of Vertiport Operations

The Urban Air Mobility concept envisions a new future for transportation in urban environments, primarily focused around vertiport operations. A vertiport refers to an identifiable ground or elevated area used for the vertical takeoff and landing of an aircraft. One critical role within vertiport operations that has been proposed but is under-researched is the vertiport manager. The vertiport manager is expected to manage the ground-to-air operations at the vertiport, but their precise responsibilities, tasks, and challenges are currently undefined. The High Density Vertiplex Subproject at NASA is responsible for developing and testing technologies, concepts, and architectures that will support the infrastructure needed for terminal environments around vertiports. Our previous work investigated ground control station operators performing simulated and live flight operations within a remote operations environment. In the current study, we extended from our previous work to explore the role of a vertiport manager. Specifically, we investigated five participants serving as a vertiport manager across both simulated and live flight operations. We performed multiple knowledge elicitation techniques, a thematic content analysis of qualitative data, and naturalistic observations to create a list of insights, design and training recommendations, and a simplified cognitive task diagram of the vertiport manager’s primary task. Findings from this study are discussed within the context of the current debate on the degree to which this role should be automated. A third alternative is suggested to allow a human vertiport manager to be successful by teaming with increasingly autonomous systems, designing the role to improve safety and efficiency of Urban Air Mobility operations.

AAM↗
NASA NTRS2018

Computational Model Prediction and Biological Validation Using Simplified Mixed Field Exposures for the Development of a GCR Reference Field

The yield of chromosomal aberrations has been shown to increase in the lymphocytes of astronauts after long-duration missions of several months in space. Chromosome exchanges, especially translocations, are positively correlated with many cancers and are therefore a potential biomarker of cancer risk associated with radiation exposure. Although extensive studies have been carried out on the induction of chromosomal aberrations by low- and high-LET radiation in human lymphocytes, fibroblasts, and epithelial cells exposed in vitro, there is a lack of data on chromosome aberrations induced by low dose-rate chronic exposure and mixed field beams such as those expected in space. Chromosome aberration studies at NSRL will provide the biological validation needed to extend the computational models over a broader range of experimental conditions (more complicated mixed fields leading up to the galactic cosmic rays (GCR) simulator), helping to reduce uncertainties in radiation quality effects and dose-rate dependence in cancer risk models. These models can then be used to answer some of the open questions regarding requirements for a full GCR reference field, including particle type and number, energy, dose rate, and delivery order. In this study, we designed a simplified mixed field beam with a combination of proton, helium, oxygen, and iron ions with shielding or proton, helium, oxygen, and titanium without shielding. Human fibroblasts cells were irradiated with these mixed field beam as well as each single beam with acute and chronic dose rate, and chromosome aberrations (CA) were measured with 3-color fluorescent in situ hybridization (FISH) chromosome painting methods. Frequency and type of CA induced with acute dose rate and chronic dose rates with single and mixed field beam will be discussed. A computational chromosome and radiation-induced DNA damage model, BDSTRACKS (Biological Damage by Stochastic Tracks), was updated to simulate various types of CA induced by acute exposures of the mixed field beams used for the experiments. The chromosomes were simulated by a polymer random walk algorithm with restrictions to their respective domains in the nucleus [1]. The stochastic dose to the nucleus was calculated with the code RITRACKS [2]. Irradiation of a target volume by a mixed field of ions was implemented within RITRACKs, and the fields of ions can be delivered over specific periods of time, allowing the simulation of dose-rate effects. Similarly, particles of various types and energies extracted from a pre-calculated spectra of galactic cosmic rays (GCR) can be used in RITRACKS. The number and spatial location of DSBs (DNA double-strand breaks) were calculated in BDSTRACKS using the simulated chromosomes and local (voxel) dose. Assuming that DSBs led to chromosome breaks, and simulating the rejoining of damaged chromosomes occurring during repair, BDSTRACKS produces the yield of various types of chromosome aberrations as a function of time (only final yields are presented). A comparison between experimental and simulation results will be shown.

Hada, M.↗
NASA NTRS1977

Precision gravity detection - Gradiometry and/or radiometry

Current knowledge concerning the earth's gravity field is limited to about 1500-2000 km resolution. However, the resolution of gravity anomalies having a spatial extent of 100-1000 km over the entire globe is needed for important geophysical and geodetic applications. In the near future satellite altimetry will be used to determine the ocean geoid at the 10 cm - 1 m level. In order to provide a similar level of resolutions over the land regions, there exists a need for utilizing new promising techniques such as gravity gradiometry and new radiometric measurements, viz., satellite-to-satellite tracking. Satellite-to-satellite tracking techniques have shown potential for improving the medium wavelength component of the gravity field. The gravity gradiometer has not yet been tested on board a satellite. The reported analysis includes a simplified theoretical model to compare the effectiveness of the gradiometer measurements and radiometric measurements for high resolution gravity field determination, and the direct estimation of local gravity anomalies represented by point masses using a simulated gravity gradiometer and satellite-to-satellite tracking data.

Ananda, M.↗
NASA NTRS1981

A Module Experimental Process System Development Unit (MEPSDU)

Subsequent to the design review, a series of tests was conducted on simulated modules to demonstrate that all environmental specifications (wind loading, hailstone impact, thermal cycling, and humidity cycling) are satisfied by the design. All tests, except hailstone impact, were successfully completed. The assembly sequence was simplified by virtue of eliminating the frame components and assembly steps. Performance was improved by reducing the module edge border required to accommodate the frame of the preliminary design module. An ultrasonic rolling spot bonding technique was selected for use in the machine to perform the aluminum interconnect to cell metallization electrical joints required in the MEPSDU module configuration. This selection was based on extensive experimental tests and economic analyses.

Source record↗
NASA NTRS1981

Numerical simulation of transonic flows in diffusers

Numerical simulations were made of two-dimensional transonic flows in diffusers, including flow separation induced by a shock or adverse pressure gradient. The mass-averaged, time-dependent, compressible Navier-Stokes equations, simplified by the thin-layer approximation, were solved using MacCormack's hybrid method. The eddy-viscosity formulation was described by the Wilcox-Rubesin's two-equation, k-omega model. Detailed comparison of the computed results with measurements showed good agreement in all cases, including one with massive separation induced by a strong shock. The computation correctly predicted the details of a distinct lambda shock pattern, closely duplicating the configuration observed experimentally in spark-schlieren photographs.

Liou, M.-S.↗
NASA NTRS1982

A time-dependent ice sheet model - Preliminary results

A numerical model of ice sheet flow is developed, and preliminary results are described. This model includes vertical resolution of temperature, stress, and strain rate which represents a considerable improvement over previous vertically averaged ice sheet models. The model follows the flow of ice along a flow line within an ice sheet drainage basin. Longitudinal stresses and basal sliding are included. Basal sliding is dependent on the base shear stress and a specified distribution of basal water pressure. The numerical methods used to solve the coupled set of stress and velocity equations for the static and time-evolutionary cases are discussed. A steady state profile simulating an ice stream is calculated for a particular set of input parameters, and changes in the profile are examined for different choices of parameters. Preliminary studies of response behavior are completed using a simplified ice sheet geometry with a fixed terminus or grounding line. The results of these studies illustrate ice sheet thinning in response to a lowered sea level or to a reduction in the extent of ice rises (or pinning points) within ice shelves.

Bindschadler, R. A.↗
NASA NTRS1987

On the inadequacies of current multi-flexible body simulation codes

DISCOS was used to simulate the spin-up of a uniform flexible beam mounted on a rigid spinning disk. The system operated well for the first few seconds but then there was a drastic rise in deflection as the whole system became unstable. Attention is given to the reason for the breakdown of DISCOS and how this affects the simulation results from DISCOS and other multiflexible-body simulation programs. It is found that a formulation option already available in DISCOS will eliminate the dramatic divergence observed in high spin regimes and give good results in low spin regimes while requiring highly simplified input data.

Eke, Fidelis O.↗
NASA NTRS2006

Evolutionary Design of a Phased Array Antenna Element

We present an evolved S-band phased array antenna element design that meets the requirements of NASA's TDRS-C communications satellite scheduled for launch early next decade. The original specification called for two types of elements, one for receive only and one for transmit/receive. We were able to evolve a single element design that meets both specifications thereby simplifying the antenna and reducing testing and integration costs. The highest performance antenna found using a genetic algorithm and stochastic hill-climbing has been fabricated and tested. Laboratory results are largely consistent with simulation. Researchers have been investigating evolutionary antenna design and optimization since the early 1990s, and the field has grown in recent years its computer speed has increased and electromagnetic simulators have improved. Many antenna types have been investigated, including wire antennas, antenna arrays and quadrifilar helical antennas. In particular, our laboratory evolved a wire antenna design for NASA's Space Technology 5 (ST5) spacecraft. This antenna has been fabricated, tested, and is scheduled for launch on the three spacecraft in 2006.

Globus, Al↗
NASA NTRS2021

Virtual Reality Training Lab

This video highlights the Virtual Reality Laboratory. It shows off the different systems the lab supports for crew training including Charlotte Mass Handling, Robotics and hardware checkout and SAFER. It focuses on the SAFER (Simplified Aid for EVA Rescue) system and shows briefly how to perform a SAFER rescue in Virtual Reality.

Simulation↗
NASA NTRS1971

Combustion of a premixed system in stagnation flow. I - Theoretical.

The theoretical steady-state and transient characteristics of a premixed combustible system in laminar axisymmetric stagnation flow are studied by way of numerical solution of the governing boundary-layer equations. Computations, which are based on the oxidation reaction of carbon monoxide in humid air, invoke a minimum of simplifying assumptions. Steady-state results include prediction of (1) profiles of the state variables, (2) extinction of blow-off conditions, (3) ignition conditions, and (4) the heat flux to the stagnation point. Computer simulations of the unsteady state provide an indication of the stability of a given steady state to perturbations. Comparisons between some of the predictions of the mathematical model and the results of laboratory experiments will be reported in Part II.

Smith, H. W.↗
NASA NTRS1975

A generalized tensor formulation of atmosphere and seas dynamics

A generalized mathematical model was developed for simulation of the dynamics and transport of both the atmosphere and seas. A nearly horizontal bottom coordinate surface conforms to the land-to-air interface and the sea-floor-to-water interface, which simplifies computations. General vertical motion of the other quasi-horizontal coordinate surfaces is allowed; external gravity waves can be represented by the top coordinate surface, and meteorological fronts and inversion layers in the atmosphere and refractive layers in the seas can be represented with enhanced resolution by the internal quasi-horizontal coordinate surfaces. A tensor reformulation of the standard subgrid mixing theory departs significantly from the standard theory in allowing, as a solution under adiabatic conditions, rigid-body rotation of the atmosphere.

Avis, L. M.↗
NASA NTRS1982

A middle and upper tropospheric cloud model

The interplay of the various physical processes involved in the formation, maintenance, and decay of middle and upper tropospheric stratiform clouds is discussed. Ice phase fair weather cloud forms are considered. Simulations of cirriform clouds which attempt to incorporate the physical processes in an interactive manner were performed. A two dimensional time dependent Eulerian numerical model, which incorporates all of the important physical processes in a simplified way, is employed to investigate the role of these processes in the evolution of a cloud in an isolated atmospheric layer. Physical parameters considered are the eddy viscosity and the thermal, water vapor, and ice water eddy diffusivities.

Source record↗
NASA NTRS1989

Human factors model concerning the man-machine interface of mining crewstations

The U.S. Bureau of Mines is developing a computer model to analyze the human factors aspect of mining machine operator compartments. The model will be used as a research tool and as a design aid. It will have the capability to perform the following: simulated anthropometric or reach assessment, visibility analysis, illumination analysis, structural analysis of the protective canopy, operator fatigue analysis, and computation of an ingress-egress rating. The model will make extensive use of graphics to simplify data input and output. Two dimensional orthographic projections of the machine and its operator compartment are digitized and the data rebuilt into a three dimensional representation of the mining machine. Anthropometric data from either an individual or any size population may be used. The model is intended for use by equipment manufacturers and mining companies during initial design work on new machines. In addition to its use in machine design, the model should prove helpful as an accident investigation tool and for determining the effects of machine modifications made in the field on the critical areas of visibility and control reach ability.

Rider, James P.↗
NASA NTRS1989

Low-speed aerodynamic characteristics of a powered NASP-like configuration in ground effect

Results are presented on the low-speed aerodynamic characteristics of a simplified NASP (for National Aerospace Plane Program)-like configuration, obtained in the NASA-Langley 14-by-22-foot subsonic tunnel. The model consisted of a triangular wedge forebody, a rectangular midsection housing the propulsion simulation system, and a rectangular wedge aftbody; it also included a delta wing, exhaust flow deflectors, and aftbody fences. Flow visualization was obtained by injecting water into the engine simulator inlets and using a laser light sheet to illuminate the resulting exhaust flow. It was found that power-on ground effects for NASP-like configuration can be substantial; these effects can be reduced by increasing the angle-of-attack to the value of the aftbody ramp angle. Power-on lift losses in ground effect increased with increasing thrust, but could be reduced by the addition of a delta wing to the configuration. Power-on lift losses also increased with use of aftbody fences.

Gatlin, Gregory M.↗
NASA NTRS1992

Flowfield simulation about the SOFIA Airborne Observatory

The Reynolds averaged Navier-Stokes equations have been applied to Stratospheric Observatory For Infrared Astronomy (SOFIA) configurations. Comparisons between numerical and experimental results are made in two-dimensions for free shear layers and a rectangular cavity, and in three-dimensions for simplified SOFIA geometries. Dominant acoustic behaviour of the cavity flows compare well with experiment. The sensitivity of the solutions to changes in grid cell size and artificial dissipation levels are shown. Furthermore, optical path distortion due to the flow field is modelled using geometrical constructs. The results demonstrate the viability and usefulness of the present computational methods for this class unsteady applications.

Atwood, Christopher A.↗
NASA NTRS2010

Characterizing a Wake-Free Safe Zone for the Simplified Aircraft-Based Paired Approach Concept

The Federal Aviation Administration (FAA) has proposed a concept of operations geared towards achieving increased arrival throughput at U.S. Airports, known as the Simplified Aircraft-based Paired Approach (SAPA) concept. In this study, a preliminary characterization of a wake-free safe zone (WFSZ) for the SAPA concept has been performed. The experiment employed Monte-Carlo simulations of varying approach profiles by aircraft pairs to closely-spaced parallel runways. Three different runway lateral spacings were investigated (750 ft, 1000 ft and 1400 ft), along with no stagger and 1500 ft stagger between runway thresholds. The paired aircraft were flown in a leader/trailer configuration with potential wake encounters detected using a wake detection surface translating with the trailing aircraft. The WFSZ is characterized in terms of the smallest observed initial in-trail distance leading to a wake encounter anywhere along the approach path of the aircraft. The results suggest that the WFSZ can be characterized in terms of two primary altitude regions, in ground-effect (IGE) and out of ground-effect (OGE), with the IGE region being the limiting case with a significantly smaller WFSZ. Runway stagger was observed to only modestly reduce the WFSZ size, predominantly in the OGE region.

Guerreiro, Nelson M.↗