SEARCH · Engineering Papers

Results for “Shear Layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS2007

Boundary Layer Transition on an Axial Compressor Stator Blade-Wake Passing and Freestream Turbulence Effects

Quantitative observations of transitional boundary layers in regions of strong flow deceleration on an axial compressor stator blade are reported. Measurements are obtained at a fixed chordwise position, and the blade incidence was varied by changing the compressor throughflow so as to move the transition region relative to the stationary probe. It was thus possible to observe typical boundary layer behavior at various stages of transition in the turbomachine environment. The range of observations covers separating laminar flow at transition onset, and reattachment of intermittently turbulent periodically separated shear layers.

Walker, G. J.↗

NASA NTRS2009

Exploring a Method for Improving Turbulent Separated-Flow Predictions with kappa-omega Models

A particular failing of Reynolds-averaged Navier-Stokes separated turbulent flow computations is addressed within the context of a kappa-omega two-equation turbulence model. The failing is the tendency for turbulence models to under-predict turbulent shear stress in the shear layers of some separation bubbles, yielding late boundary layer reattachment and recovery. Inspired by unpublished work of Volker, Langtry, and Menter, the author undertook an independent investigation in an attempt to improve the ability of the Menter shear stress transport (SST) model to predict flowfield characteristics in and downstream of separation bubbles. The fix is an ad hoc term that is a function of the local ratio of turbulent production to dissipation; it is used to multiply the omega-destruction term, increasing eddy viscosity in separated regions. With this fix, several flowfields are investigated. Results show that, although the "separation fix" can provide dramatic improvement in some cases, it is not consistently good for all flows. Thus, although it may prove helpful in many situations in its current form, this model may benefit from further refinements, including better sensitization to the energetics of turbulence in the separated region.

Rumsey, Christopher L.↗

NASA NTRS1986

The computation of flow past an oblique wing using the thin-layer Navier-Stokes equations

Essential aspects are presented for computing flow past an oblique wing with the thin-layer Navier-Stokes equations. A new method is developed for generating a grid system around a realistic wing. This method utilizes a series of conformal transformations. The thin-shear-layer approximation and an algebraic eddy-viscosity turbulence model are used to simplify the Reynolds-averaged Navier-Stokes equations. An implicit, factored numerical scheme and the concept of pencil data structure are utilized. For the first time, some flow fields caused by the oblique wing in a supersonic free stream are discussed, emphasizing the separated vortex flows associated with such a wing.

Mehta, Unmeel↗

NASA NTRS1985

Effect of flow oscillations on cavity drag and a technique for their control

Experiments to relate the state of the shear layer to cavity drag have been performed in a water channel using a 4" axisymmetric cavity model. Detailed flow measurements in various cavity flow oscillation phases, amplitude amplification along the flow direction, distribution of shear stress, and other momentum flux obtained by laser Doppler velocimeter are presented. Measurements show exponential dependence of cavity drag on the length of the cavity. A jump in the cavity drag coefficient is observed as the cavity flow shows a bluff body wake type behavior. Natural and forced oscillations are introduced by a sinusoidally heated thin-film strip which excites the Tollmein-Schlichting waves in the boundary layer upstream of the gap. For a large gap, self-sustained periodic oscillations are observed, while for smaller gaps, which do not oscillate naturally, periodical oscillations can be obtained by external forcing through the strip heater. The drag of the cavity can be increased by one order of magnitude in the non-oscillating case through external forcing. Also, it is possible to completely eliminate mode switching by external forcing. For the first time, it is demonstrated that amplitude of cavity flow Kelvin-Helmholtz wave is dampened or cancelled by introduction of external perturbation of natural flow frequency but different phase.

Gharib, M.↗

NASA NTRS1987

Numerical modeling of the vortex/airfoil interaction

A modeling of the vortex-airfoil interaction is presented in which the finite-area of the real vortices is taken into consideration. Two vortex models are used. In the first, a disturbed piece of vorticity layer is simulated by four rows of discrete vortices of small strength. In the second, a number of discrete vortices is arranged within a circle. The first model may simulate a shear layer or a wake, while the second, a well-formed vortex. The method was applied to the calculation of the pressure induced on the surface of the airfoil by the interacting vortex. Both models give similar results. It was found that for large distances of the vortex from the surface of the airfoil, the consideration or not of the finite-area of the vortex is not a significant factor in determining the induced pressure field. However, when the distance of the vortex from the surface is reduced, its shape is distorted and the induced pressure pulses have lower amplitude than the ones induced by an equivalent point vortex. In the limit, where the vortex impinges on the leading edge of the airfoil, it is split into two and the time dependent pressure coefficient takes even negative values at some time intervals.

Panaras, Argyris G.↗

NASA NTRS1988

Ejection mechanisms in the sublayer of a turbulent channel

The structure of the vorticity field in the viscous wall layer of a turbulent channel is studied by examining the results of a fully resolved direct numerical simulation. It is shown that this region is dominated by intense three-dimensional shear layers in which the dominant vorticity component is spanwise. The advection and reproduction processes of these structures are examined and shown to be consistent with the classical generation mechanism for two-dimensional Tollmien-Schlichting waves. This process is fundamentally different from the usually accepted mechanism involving hairpin vortices.

Jimenez, Javier↗

NASA NTRS2017

Increased Jet Noise Due to a "Nominally Laminar" State of Nozzle Exit Boundary Layer

A set of 2-in. diameter nozzles is used to investigate the effect of varying exit boundary layer state on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while nozzles involving a "nominally laminar" boundary layer are loud especially on the high-frequency side of the sound pressure level spectrum. The latter boundary layer state involves a "Blasius-like" mean velocity profile but higher turbulence intensities compared to those in the turbulent state. The higher turbulence in the initial region of the jet shear layer leads to increased high-frequency noise. The results strongly suggest that an anomaly noted with subsonic jet noise databases in the literature is due to a similar effect of differences in the initial boundary layer state.

Zaman, K. B. M. Q.↗

NASA NTRS2017

Increased Jet Noise Due to a "Nominally Laminar" State of Nozzle Exit Boundary Layer

A set of 2-inch diameter nozzles is used to investigate the effect of varying exit boundary layer state on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while nozzles involving a nominally-laminar boundary layer are loud especially on the high-frequency side of the sound pressure level spectrum. The latter boundary layer state involves a Blasius-like mean velocity profile but higher turbulence intensities compared to those in the turbulent state. The higher turbulence in the initial region of the jet shear layer leads to increased high-frequency noise. The results strongly suggest that an anomaly noted with subsonic jet noise databases in the literature is due to a similar effect of differences in the initial boundary layer state.

Zaman, K. B. M. Q.↗

NASA NTRS1978

Prediction of nearfield jet entrainment by an interactive mixing/afterburning model

The development of a computational model (BOAT) for calculating nearfield jet entrainment, and its application to the prediction of nozzle boattail pressures, is discussed. BOAT accounts for the detailed turbulence and thermochemical processes occurring in the nearfield shear layers of jet engine (and rocket) exhaust plumes while interfacing with the inviscid exhaust and external flowfield regions in an overlaid, interactive manner. The ability of the model to analyze simple free shear flows is assessed by detailed comparisons with fundamental laboratory data. The overlaid methodology and the entrainment correction employed to yield the effective plume boundary conditions are assessed via application of BOAT in conjunction with the codes comprising the NASA/LRC patched viscous/inviscid model for determining nozzle boattail drag for subsonic/transonic external flows. Comparisons between the predictions and data on underexpanded laboratory cold air jets are presented.

Dash, S. M.↗

NASA NTRS1974

Calculation of turbulent shear stress in supersonic boundary layer flows

Turbulent shear stress distributions for supersonic boundary layer flows have been computed from experimental mean boundary layer data. The computations have been made by numerically integrating the time averaged continuity and streamwise momentum equations. Distributions have been obtained for flows upstream and downstream of shock-wave-boundary layer interactions and for both two-dimensional and axisymmetric flows. The computed results are compared with recently reported shear stress measurements which were obtained by hot wire anemometer and laser velocimeter techniques.

Sun, C. C.↗

NASA NTRS2010

Boundary Layers, Transitions and Separation

Effects of roughness in boundary layers have to be addressed. Until adverse pressure gradient effects are understood, roughness will not significantly drive design. Mechanisms responsible for separation not understood. Effects on Zero Pressure Gradient boundary layers (shear stress). Effects on separation in pressure gradient (prediction of separation). Effect on scalar transport (heat transfer) not understood. Model for skin friction needed in simulations - first grid point likely to be in buffer layer. Definition of roughness important for useful experiments. A lot of validation experiments will be needed. How to get to ks for roughness of engineering interest? - depends on wavelength height, etc. for engineering interest? Re-discovering the wheel should be avoided: existing knowledge (theoretical and experimental) should find its way into the engineering models. It is a task of the industry to filter out the existing information in the literature for results relevant to its application, being external or internal.

Source record↗

NASA NTRS1983

Numerical solution of three-dimensional unsteady transonic flow over wings including inviscid/viscous interactions

A numerical procedure is presented for computing the unsteady transonic flow field about three dimensional swept wings undergoing general time dependent motion. The outer inviscid portion of the flow is assumed to be governed by the modified unsteady transonic small disturbance potential equation which is integrated in the time domain by means of an efficient alternating direction implicit approximate factorization algorithm. Gross dominant effects of the shock boundary layer interaction are accounted for by a simple empirically defined model. Viscous flow regions adjacent to the wing surface and in the trailing wake are described by a set of integral equations appropriate for compressible turbulent shear layers. The two dimensional boundary layer equations are applied quasi-statically stripwise across the span. Coupling with the outer inviscid flow is implemented through use of the displacement thickness concept within the limitations of small disturbance theory. Validity of the assumptions underlying the method is established by comparison with experimental data for the flow about a high aspect ratio transport wing having an advanced airfoil section.

Rizzetta, D. P.↗

NASA NTRS1988

Direct simulations of chemically reacting turbulent mixing layers, part 2

The results of direct numerical simulations of chemically reacting turbulent mixing layers are presented. This is an extension of earlier work to a more detailed study of previous three dimensional simulations of cold reacting flows plus the development, validation, and use of codes to simulate chemically reacting shear layers with heat release. Additional analysis of earlier simulations showed good agreement with self similarity theory and laboratory data. Simulations with a two dimensional code including the effects of heat release showed that the rate of chemical product formation, the thickness of the mixing layer, and the amount of mass entrained into the layer all decrease with increasing rates of heat release. Subsequent three dimensional simulations showed similar behavior, in agreement with laboratory observations. Baroclinic torques and thermal expansion in the mixing layer were found to produce changes in the flame vortex structure that act to diffuse the pairing vortices, resulting in a net reduction in vorticity. Previously unexplained anomalies observed in the mean velocity profiles of reacting jets and mixing layers were shown to result from vorticity generation by baroclinic torques.

Metcalfe, Ralph W.↗

NASA NTRSDate not supplied

Separation and Transition on a Cone-Cylinder-Flare: Computational Investigations

Base flow computation and stability analysis were conducted for hypersonic flow over a cone-cylinder-flare (CCF) geometry for conditions that correspond to the experimental runs carried out in three wind tunnels. Owing to the presence of an attached boundary layer, a separation bubble induced by a shock-boundary layer interaction, and a reattachment region, the chosen flow configuration is physically rich. The complexity of this flowfield encompasses a combination of convective instabilities developing on the cone, global instabilities in the separation bubble, and shear-layer modes and streaks in the reattachment region. Thus, the selected CCF configuration provides the opportunity for a comprehensive comparison of the currently available methodologies for analyzing boundary layer instabilities. Various tools are used for the analysis, including global stability codes as well as convective instability analyses based on a local theory, a weakly non-parallel analysis, and tools that are applicable to strongly non-parallel flows. The paper presents a comparison of the convective instability characteristics based on different methodologies, such as linear stability theory (LST), the harmonic form of linearized Navier-Stokes equations (HLNSE), and resolvent analysis. The CCF configuration provided an effective framework for conducting a detailed cross-validation of this type, which had not yet been addressed in existing literature. This document is accompanied by a companion paper that is focused on the experimental aspects of the CCF configuration. Both papers are being presented in a dedicated session that highlights the research activities of the NATO STO Research Task Group AVT-346.

Boundary Layer Transition↗

NASA NTRS1978

Influence of wave dispersion on vortex pairing in a jet

The geometry of large-scale structures in the turbulent mixing layer of a moderate Reynolds number jet is deduced from measurements of the fluctuating pressure in the hydrodynamic near field. The structures are rings of concentrated vorticity that distort with downstream distance until statistical axisymmetry disappears. The rings are spaced quasi-periodically and coalesce with each other, producing larger spacings. Statistical and flow-visualization techniques are applied to free and forced jets over a range of Reynolds numbers from 5000 to 50,000 to demonstrate that rings of a given spacing do not coalesce with each other until they are far enough downstream that the local mixing layer has attained some critical thickness which scales with the wavelength of the vortex pair. Wave dispersion is evaluated as a plausible mechanism for localizing the coalescences. The central feature of the model is the observation that a shear layer is dispersive to wavelengths much longer than its thickness and nondispersive to shorter waves.

Petersen, R. A.↗

NASA NTRS1986

A review of aerothermal problems associated with hypersonic flight

A review is presented of some important aerothermal problems associated with hypersonic flight with emphasis on those involved with viscous/inviscid interaction. The flow regimes of importance to hypersonic vehicles of current interest are discussed and the performance of experimental facilities currently available to study real gas phenomena associated with hypervelocity flight are briefly reviewed. Viscous interaction and real gas effects in hypervelocity flight at high altitudes are discussed with reference to measurements which are required to support the development of improved prediction capabilities in this regime. Theoretical and experimental research on 2D and 3D shock wave/laminar boundary layer interaction relevant to the performance of control surfaces and inlets in hypersonic flight at high altitudes is reviewed. The characteristics of transition regions in hypersonic flows are discussed with particular reference to transitional flows over nosetips and swept leading edges. Studies of shock interaction phenomena on indented nosetips are discussed, followed by a review of the surface roughness and blowing effects. Research to describe the characteristics of 2D and 3D regions of shock wave/turbulent boundary layer interaction in hypersonic flow is reviewed with particular reference to intrinsic unsteadiness and potential compressibility effects in these flows. This review is concluded with a brief discussion of observations suggesting a decrease in the spreading rate in shear layer mixing in hypersonic flow.

Holden, M. S.↗

NASA NTRS1991

Direct simulation of compressible turbulence in a shear flow

Compressibility effects on the turbulence in homogeneous shear flow are investigated. The growth of the turbulent kinetic energy was found to decrease with increasing Mach number: a phenomenon which is similar to the reduction of turbulent velocity intensities observed in experiments on supersonic free shear layers. An examination of the turbulent energy budget shows that both the compressible dissipation and the pressure-dilatation contribute to the decrease in the growth of kinetic energy. The pressure-dilatation is predominantly negative in homogeneous shear flow, in contrast to its predominantly positive behavior in isotropic turbulence. The different signs of the pressure-dilatation are explained by theoretical consideration of the equations for the pressure variance and density variance. Previously, the following results were obtained for isotropic turbulence: (1) the normalized compressible dissipation is of O(M(sub t)(exp 2)); and (2) there is approximate equipartition between the kinetic and potential energies associated with the fluctuating compressible mode. Both of these results were substantiated in the case of homogeneous shear. The dilatation field is significantly more skewed and intermittent than the vorticity field. Strong compressions seem to be more likely than strong expansions.

Sarkar, S.↗

NASA NTRS1991

Direct simulation of compressible turbulence in a shear flow

The purpose of this study is to investigate compressibility effects on the turbulence in homogeneous shear flow. It is found that the growth of the turbulent kinetic energy decreases with increasing Mach number, a phenomenon similar to the reduction of turbulent velocity intensities observed in experiments on supersonic free shear layers. An examination of the turbulent energy budget shows that both the compressible dissipation and the pressure-dilatation contribute to the decrease in the growth of kinetic energy. The pressure-dilatation is predominantly negative in homogeneous shear flow, in contrast to its predominantly positive behavior in isotropic turbulence. The different signs of the pressure-dilatation are explained by theoretical consideration of the equations for the pressure variance and density variance.

Sarkar, S.↗