Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Semiconductor structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Macromolecular Crystal Quality

There are many ways of judging a good crystal. Which we use depends on the qualities we seek. For gemstones size, clarity and impurity levels (color) are paramount. For the semiconductor industry purity is probably the most important quality. For the structural crystallographer the primary desideratum is the somewhat more subtle concept of internal order. In this chapter we discuss the effect of internal order (or the lack of it) on the crystal's diffraction properties.

Snell, Edward H.↗

CARES/Life Used for Probabilistic Characterization of MEMS Pressure Sensor Membranes

Microelectromechanical systems (MEMS) devices are typically made from brittle materials such as silicon using traditional semiconductor manufacturing techniques. They can be etched (or micromachined) from larger structures or can be built up with material deposition processes. Maintaining dimensional control and consistent mechanical properties is considerably more difficult for MEMS because feature size is on the micrometer scale. Therefore, the application of probabilistic design methodology becomes necessary for MEMS. This was demonstrated at the NASA Glenn Research Center and Case Western Reserve University in an investigation that used the NASA-developed CARES/Life brittle material design program to study the probabilistic fracture strength behavior of single-crystal SiC, polycrystalline SiC, and amorphous Si3N4 pressurized 1-mm-square thin-film diaphragms. These materials are of interest because of their superior high-temperature characteristics, which are desirable for harsh environment applications such as turbine engine and rocket propulsion system hot sections.

Nemeth, Noel N.↗

Using a carbon vacancy reduction material to increase average carrier lifetime in a silicon carbide semiconductor device

A semiconductor die and a process for fabricating the semiconductor die are disclosed. The semiconductor die has a substrate and a silicon carbide (SiC) epitaxial structure on the substrate. The SiC epitaxial structure includes at least a first N-type SiC layer, at least a first P-type SiC layer, and carbon vacancy reduction material, which has been implanted into a surface of the SiC epitaxial structure. Further, the SiC epitaxial structure has been annealed to mobilize the carbon vacancy reduction material to diffuse carbon atoms substantially throughout the SiC epitaxial structure, thereby increasing an average carrier lifetime in the SiC epitaxial structure.

36 MATERIALS SCIENCE↗

Nanowire photochemical diodes for artificial photosynthesis

Artificial photosynthesis can provide a solution to our current energy needs by converting small molecules such as water or carbon dioxide into useful fuels. This can be accomplished using photochemical diodes, which interface two complementary light absorbers with suitable electrocatalysts. Nanowire semiconductors provide unique advantages in terms of light absorption and catalytic activity, yet great control is required to integrate them for overall fuel production. In this review, we journey across the progress in nanowire photoelectrochemistry (PEC) over the past two decades, revealing design principles to build these nanowire photochemical diodes. To this end, we discuss the latest progress in terms of nanowire photoelectrodes, focusing on the interplay between performance, photovoltage, electronic band structure, and catalysis. Emphasis is placed on the overall system integration and semiconductor-catalyst interface, which applies to inorganic, organic, or biologic catalysts. Last, we highlight further directions that may improve the scope of nanowire PEC systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monte Carlo Explicitly Correlated Second-Order Many-Body Green’s Function Calculations of Semiconductor Band Gaps

A systematically converging series of ab initio, post-density-functional, size-consistent, electron-correlated approximations is desired for predictive computing of felectronic band structures of insulating, semiconducting, and metallic solids. A series that meets all of these desiderata (except the applicability to metals) is ab initio many-body Green's function theory based on Gaussian-type-orbital (GTO) basis sets. Here, its leading-order approximation, the second-order Green's function (GF2) method in the diagonal and frequency-independent approximations with the aug-cc-pVDZ basis set, is applied to the fundamental band gaps of three semiconductors (diamond, silicon, and silicon carbide in the zincblende structure) using cluster models. Corrections are made to the basis-set-incompleteness errors by the explicit-correlation (F12) ansatz (GF2-F12) for the valence band edges. The crystals are modeled as surface-passivated clusters of increasing sizes, whose wave functions are expanded by up to 2709 GTO basis functions. Immense computational costs of these calculations are overcome by the highly scalable stochastic algorithm of the Monte Carlo GF2-F12 method, whose operation cost per state increases only as a cubic power of system size, which has a tiny memory footprint and easily achieves near-perfect parallel efficiency on thousands of CPUs or on hundreds of GPUs. The correlated, F12-corrected highest-occupied and lowest-unoccupied molecular-orbital energy (HOMO-LUMO) gap is 5.78 ± 0.07 eV for C 87 H 76 as compared with the experimental value of the fundamental (indirect) band gap of bulk diamond at 5.48 eV. The correlated, F12-corrected HOMO-LUMO gaps for Si 75 H 76 and Si 32 C 43 H 76 are 2.56 ± 0.15 eV and 3.50 ± 0.12 eV, respectively, which are expected to decrease further with increasing cluster sizes. As a result, the experimental fundamental (indirect) band gaps of bulk silicon and silicon carbide are 1.17 eV and 2.42 eV, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of the transition from the metastable tetragonal st12 to the diamond-cubic phase in germanium characterized by neutron spectroscopy

The complex phase diagram of germanium allows for exotic crystalline phases recoverable from high pressure. Among these, the tetragonal st12 phase is unusual as it shares characteristics with amorphous Ge resulting in desirable band-gap characteristics. Here, we leverage a high neutron flux and large volume pressure capabilities to characterize st12-Ge and its dynamics upon conversion to diamond-cubic Ge with inelastic neutron scattering. Here, we exploit the characteristics of time-of-flight neutron scattering for time-resolved investigations. This analysis may suggest the existence of a transient disordered state upon annealing befitting the known structural relationship between st12-Ge and amorphous Ge, a relationship that can open the potential for band-gap tuning.

Elemental semiconductors↗

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗

Facet-selective etching trajectories of individual semiconductor nanocrystals

The size and shape of semiconductor nanocrystals govern their optical and electronic properties. Liquid cell transmission electron microscopy (LCTEM) is an emerging tool that can directly visualize nanoscale chemical transformations and therefore inform the precise synthesis of nanostructures with desired functions. However, it remains difficult to controllably investigate the reactions of semiconductor nanocrystals with LCTEM, because of the highly reactive environment formed by radiolysis of liquid. Here, we harness the radiolysis processes and report the single-particle etching trajectories of prototypical semiconductor nanomaterials with well-defined crystalline facets. Lead selenide nanocubes represent an isotropic structure that retains the cubic shape during etching via a layer-by-layer mechanism. The anisotropic arrow-shaped cadmium selenide nanorods have polar facets terminated by either cadmium or selenium atoms, and the transformation trajectory is driven by etching the selenium-terminated facets. LCTEM trajectories reveal how nanoscale shape transformations of semiconductors are governed by the reactivity of specific facets in liquid environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of biphenylene-derived tunable dirac materials

The exploration of carbon allotropes has unveiled a series of two-dimensional (2D) materials with unique electronic and mechanical properties, yet the need for stable structures with tailored electronic properties persists. Here, in this study, we introduce a new class of 2D carbon allotropes derived from the biphenylene network (BPN), incorporating acetylenic linkages to tune their structural and electronic characteristics. Through density functional theory calculations, we identified ten novel BPN-derived structures that exhibit both energetic and dynamic stability, confirmed by cohesive energy and phonon spectrum analyses. Among them, BPN-02 and BPN04 are metallic, featuring critically-tilted type-III Dirac cones under ~ 5 % biaxial strain, while BPN-22 is a semiconductor with a band gap of 0.95 eV and exhibits highly anisotropic carrier mobility. Additionally, these structures demonstrate significant anisotropy in their elastic properties, further distinguishing them from other 2D carbon materials like graphene. Our findings suggest that these novel BPN-based structures have strong potential for next-generation electronic and optoelectronic applications, providing new avenues for the design and synthesis of advanced carbon materials.

2D carbon allotropes↗

High-pressure characterization of Ag 3 AuTe 2 : Implications for strain-induced band tuning

Recent band structure calculations have suggested the potential for band tuning in the chiral semiconductor Ag 3 AuTe 2 to zero upon application of negative strain. In this study, we report on the synthesis of polycrystalline Ag 3 AuTe 2 and investigate its transport and optical properties and mechanical compressibility. Transport measurements reveal the semiconducting behavior of Ag 3 AuTe 2 with high resistivity and an activation energy E a of 0.2 eV. The optical bandgap determined by diffuse reflectance measurements is about three times wider than the experimental E a ⁠. Despite the difference, both experimental gaps fall within the range of predicted bandgaps by our first-principles density functional theory (DFT) calculations employing the Perdew–Burke–Ernzerhof and modified Becke–Johnson methods. Furthermore, our DFT simulations predict a progressive narrowing of the bandgap under compressive strain, with a full closure expected at a strain of –4% relative to the lattice parameter. To evaluate the feasibility of gap tunability at such substantial strain, the high-pressure behavior of Ag 3 AuTe 2 was investigated by in situ high-pressure x-ray diffraction up to 47 GPa. Mechanical compression beyond 4% resulted in a pressure-induced structural transformation, indicating the possibility of substantial gap modulation under extreme compression conditions.

36 MATERIALS SCIENCE↗

Optically pumped semiconductor laser based on a type-II CdS/ZnSe heterostructure

An optically pumped semiconductor laser based on a type-II CdS/ZnSe nanoheterostructure containing 10 quantum wells (QWs) was studied. The structure was grown by metal-organic vapour phase epitaxy on a GaAs substrate. The lifetime of electron-hole pairs at a low pump level was measured by luminescence decay to be ∼0 ns. The peak power of the microcavity semiconductor laser at room temperature and longitudinal pumping by a repetitively pulsed N{sub 2} laser was 7.2 W at a wavelength of 514 nm. The relatively low laser slope efficiency (0.35 %) is explained by amplified spontaneous emission propagating along the structure. The peak power and efficiency of the laser in the case of transverse pumping increase to 70 W and 3.5 %, respectively. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural transition and anisotropic magnetism in disordered Zintl phase Eu 7 Ga 6 Sb 8

Single crystals of the Zintl compound Eu 7 Ga 6 Sb 8 were synthesized using a Ga-Sb flux. We report the temperature (T) and magnetic field (H) dependence of the magnetic susceptibility (χ), magnetization (M), resistivity (ρ), specific heat (C), and thermal expansion (α). We also report high-resolution powder x-ray diffraction data that support a structural phase transition with accompanying signatures seen in C(T), ρ(T), and α(T). We find Eu 7 Ga 6 Sb 8 exhibits antiferromagnetic ordering at T N1 = 9.0 K from anomalies seen in χ(T), C(T), and α(T), as well as a potential reorientation of Eu 2+ spins at T N2 = 7.5 K and T N3 = 7.2 K. In conclusion, density functional theory calculations predict Eu 7 Ga 6 Sb 8 to be semiconducting; however, electrical resistivity measurements show bad-metal behavior that indicates the presence of disorder.

36 MATERIALS SCIENCE↗

Efficient calculation of carrier scattering rates from first principles

Abstract The electronic transport behaviour of materials determines their suitability for technological applications. We develop a computationally efficient method for calculating carrier scattering rates of solid-state semiconductors and insulators from first principles inputs. The present method extends existing polar and non-polar electron-phonon coupling, ionized impurity, and piezoelectric scattering mechanisms formulated for isotropic band structures to support highly anisotropic materials. We test the formalism by calculating the electronic transport properties of 23 semiconductors, including the large 48 atom CH 3 NH 3 PbI 3 hybrid perovskite, and comparing the results against experimental measurements and more detailed scattering simulations. The Spearman rank coefficient of mobility against experiment ( r s = 0.93) improves significantly on results obtained using a constant relaxation time approximation ( r s = 0.52). We find our approach offers similar accuracy to state-of-the art methods at approximately 1/500th the computational cost, thus enabling its use in high-throughput computational workflows for the accurate screening of carrier mobilities, lifetimes, and thermoelectric power.

97 MATHEMATICS AND COMPUTING↗

Enhancing Spin Filters by Use of Bulk Inversion Asymmetry

Theoretical calculations have shown that the degrees of spin polarization in proposed nonmagnetic semiconductor resonant tunneling spin filters could be increased through exploitation of bulk inversion asymmetry (BIA). These enhancements would be effected through suitable orientation of spin collectors (or spin-polarization- inducing lateral electric fields), as described below. Spin filters -- more precisely, sources of spin-polarized electron currents -- have been sought for research on, and development of, the emerging technological discipline of spintronics (spin-transport electronics). The proposed spin filters were to be based on the Rashba effect, which is an energy splitting of what would otherwise be degenerate quantum states, caused by a spinorbit interaction in conjunction with a structural-inversion asymmetry (SIA) in the presence of interfacial electric fields in a semiconductor heterostructure. The magnitude of the energy split is proportional to the electron wave number. In a spin filter, the spin-polarized currents produced by the Rashba effect would be extracted by quantum-mechanical resonant tunneling.

Ting, David↗

Robust and Highly Conductive Water-Stable Copper Iodide-Based Hybrid Single Crystals

High conductivity, carrier mobility as well as long diffusion length are critical for highly efficient solar cells. Here, we report new types of crystalline inorganic-organic hybrid semiconductors, 2D-Cu 2 I 2 (L) [L = benzo[c][1,2,5]thiadiazole (bs) and benzo[c][1,2,5] selenadiazole (bse)], composed of one-dimensional (1D) copper iodide staircase-like chain and benzodiazole-based ligands. These compounds possess narrow and tunable band gaps and high conductivity. High-quality large single crystals of 2D-Cu 2 I 2 (bse) were grown and used to evaluate the charge transport properties of the material. State-of-the-art time-resolved microwave conductivity (TRMC) techniques were used to investigate the charge carrier dynamics, from which a high conductivity of 2 × 10 -4 S/cm, a carrier mobility of ~1 cm 2 V -1 s -1 , a maximum doping/carrier density of 2 +/- 1 × 10 15 cm -3 , and a diffusion length of ~0.17 um were obtained. We report the excellent water/chemical stability combined with high conductivity makes this I-VII-based hybrid material family promising candidates for potential optoelectronic applications.

36 MATERIALS SCIENCE↗

Role of Metal Cocatalysts in the Photocatalytic Production of Hydrogen from Water Revisited

The use of photocatalysts to promote the production of molecular hydrogen from water, following the so-called water splitting reaction, continues to be a promising route for the green production of fuels. The molecular basis of this photocatalysis is the photoexcitation of electrons from the valence band of semiconductors to their conduction band, from which they can be transferred to chemical reactants, protons in the case of water, to promote a reduction reaction. The mechanism by which such a process takes place has been studied extensively using titanium oxide, a simple material that fulfills most requirements for water splitting. However, photocatalysis with TiO 2 tends to be highly inefficient; a cocatalyst, commonly a late transition metal (Au, Pt) in nanoparticle form, needs to be added to facilitate the production of H 2 . The metal is widely believed to help with the scavenging of the excited electrons from the conduction band of the semiconductor in order to prevent their recombination with the accompanying hole formed in the valence band, a step that cancels the initial photon absorption and competes with the photolytic chemical reduction. Here we review and analyze the molecular basis for that mechanism and argue for an alternative explanation, that the role of the metal is to help with the recombination of the atomic hydrogen atoms produced by proton reduction on the semiconductor surface instead. First, we summarize what is known about the electronic structure of these photocatalysts and how the electronic levels need to line up for the reduction of protons in water to be feasible. Next, we review the current understanding of the dynamics of the steps associated with the absorption of photons, the de-excitation via electron–hole pair recombination and fluorescence decay, and the electronic transitions that lead to proton reduction, and contrast those with the rates of the chemical steps required to produce molecular hydrogen. The following section addresses the changes introduced by the addition of the metal cocatalyst, comparatively evaluating its role as either an electron scavenger or a promoter of the recombination of hydrogen atoms. A discussion of the viable chemical mechanisms for the latter pathway is included. Finally, we briefly mention other associated aspects of this photocatalysis, including the possible promotion of H 2 production with visible light via resonant excitation of the surface plasmon of Au nanoparticles, the use of single-metal (Au, Pt) atom catalysts and of yolk–shell nanostructures, and the reduction of organic molecules. We end with a brief personal perspective on the possible generality of the concepts introduced in this Critical Review.

08 HYDROGEN↗

First-Principles Assessment of ZnTe and CdSe as Prospective Tunnel Barriers at the InAs/Al Interface

Majorana zero modes are predicted to emerge in semiconductor/ superconductor interfaces, such as InAs/Al. Majorana modes could be utilized for fault tolerant topological qubits. However, their realization is hindered by materials challenges. The coupling between the superconductor and the semiconductor may be too strong for Majorana modes to emerge, due to effective doping of the semiconductor by the metallic contact. This could be mediated by adding a tunnel barrier of controlled thickness. We use density functional theory (DFT) with Hubbard U corrections, whose values are machine-learned via Bayesian optimization (BO), to assess ZnTe and CdSe as prospective tunnel barriers for the InAs/Al interface. The results of DFT +U(BO) for ZnTe are validated by comparison to angle resolved photoemission spectroscopy (ARPES). We then study bilayer interfaces of the three semiconductors with each other and with Al, as well as trilayer interfaces with a varying number of ZnTe or CdSe layers inserted between InAs and Al. We find that 16 atomic layers of either material completely insulate the InAs from metal induced gap states (MIGS). However, ZnTe and CdSe differ significantly in their band alignment, such that ZnTe forms an effective barrier for electrons, whereas CdSe forms a barrier for holes. Because of Fermi level pinning in the conduction band at the interface, only electron transport is relevant for InAs-based Majorana devices. Therefore, ZnTe is the better choice. Based on the results of our simulations, we suggest conducting experiments with ZnTe barriers in the thickness range of 6–18 atomic layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress on single barrier varactors for submillimeter wave power generation

Theoretical work on Single Barrier Varactor (SBV) diodes, indicate that the efficiency for a multiplier has a maximum for a considerably smaller capacitance variation than previously thought. The theoretical calculations are performed, both with a simple theoretical model and a complete computer simulation using the method of harmonic balance. Modeling of the SBV is carried out in two steps. First, the semiconductor transport equations are solved simultaneously using a finite difference scheme in one dimension. Secondly, the calculated I-V, and C-V characteristics are input to a multiplier simulator which calculates the optimum impedances, and output powers at the frequencies of interest. Multiple barrier varactors can also be modeled in this way. Several examples on how to design the semiconductor layers to obtain certain characteristics are given. The calculated conversion efficiencies of the modeled structures, in a multiplier circuit, are also presented. Computer simulations for a case study of a 750 GHz multiplier show that InAs diodes perform favorably compared to GaAs diodes. InAs and InGaAs SBV diodes have been fabricated and their current vs. voltage characteristics are presented. In the InAs diode, was the large bandgap semiconductor AlSb used as barrier. The InGaAs diode was grown lattice matched to an InP substrate with InAlAs as a barrier material. The current density is greatly reduced for these two material combinations, compared to that of GaAs/AlGaAs SBV diodes. GaAs based diodes can be biased to higher voltages than InAs diodes.

Nilsen, Svein M.↗