Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Deformation microstructure and positive temperature dependence of flow stress in Ni{sub 3}Ge

Single crystalline specimens of Ni{sub 3}Ge were compressed along [0 0 1] at different temperatures. Temperature dependence of the critical resolved shear stress (τ{sub 0}(T)) has been obtained. Detailed measurements at cryogen temperatures (4.2-77 K temperature interval) showed that the increase of the yield stress with temperature starts at liquid helium temperature. The values of the apparent activation volume (V*) have been obtained as a result of stress relaxation tests repeated along the stress-strain curve at different stress levels at seven temperatures (77, 293, 373, 473, 573, 673, 773 K). Transmission electron microscopy (TEM) methods were used to analyze the evolution of dislocation structure with temperature and strain. The measurements of the straight dislocations fraction determined as δ = ρ{sub sd} / ρ, (ρ{sub sd} is the straight dislocation density, ρ is a total dislocation density) have been performed. The experimental data obtained in different tests in Ni{sub 3}Ge confirm two-stage nature of the positive temperature dependence of the flow stress of alloys with the L1{sub 2} structure. The model of thermal strengthening considering two different types of mechanisms, first acting at low temperatures and second at high has been proposed. Using this model the temperature dependence of the critical resolved shear stress has been approximated and the activation parameters of thermal strengthening of Ni{sub 3}Ge have been obtained.

36 MATERIALS SCIENCE↗

Long range stress correlations in the inherent structures of liquids at rest

Simulation studies of the atomic shear stress in the local potential energy minima (inherent structures) are reported for binary liquid mixtures in 2D and 3D. These inherent structure stresses are fundamental to slow stress relaxation and high viscosity in supercooled liquids. We find that the atomic shear stress in the inherent structures (IS’s) of both liquids at rest exhibits slowly decaying anisotropic correlations. We show that the stress correlations contribute significantly to the variance of the total shear stress of the IS configurations and consider the origins of the anisotropy and spatial extent of the stress correlations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal and stress studies of normal incidence Mo/B{sub 4}C multilayers for a 6.7 nm wavelength

Wavelength, reflectance, and stress stability of Mo/B{sub 4}C multilayers were studied as a function of postdeposition annealing up to 900 deg. C. These multilayers are of interest as normal incidence coatings for wavelengths above the boron K-absorption edge. Mo/B{sub 4}C multilayers deposited at low sputtering pressure have high compressive stress. Zero stress can be achieved at 360 deg. C-370 deg. C, but annealing at <200 deg. C is sufficient to reduce stress by {approx}40%. This stress relaxation is accompanied with a multilayer period expansion of {approx}0.02 nm and a <0.5% decrease in normal incidence reflectivity. The multilayer period remains stable up to {approx}600 deg. C, while intrinsic stress changes from compressive to tensile. A four-layer model with amorphous molybdenum and boron carbide layers separated by amorphous layers of molybdenum borides (Mo{sub x}B{sub y}) is presented. These interlayers are present already in the as-deposited state and continue to grow with increasing temperature. Their presence lowers the optical contrast and the achievable reflectivity. However, they also increase multilayer thermal stability. At temperatures >600 deg. C, a noticeable decrease in reflectivity associated with the phase transition from amorphous to crystalline molybdenum boride is observed. This is accompanied with an increase in interface and surface roughness and a change in stress as a function of temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stress Relaxation Cracking in 347H Stainless Steel Arc Welds: Susceptibility Evaluation of Heat-Affected Zone

Stress relaxation cracking (SRC) is considered one of the major failure mechanisms for 347H stainless steel welds at elevated service temperatures or during post weld heat treatment (PWHT), especially within the heat-affected zone (HAZ). This work focuses on the characterization of SRC susceptibility within 347H physically simulated arc welded HAZ at elevated temperatures. A four-step SRC thermomechanical test in combination with finite element modeling (FEM) of the welding and testing processes is developed to establish a susceptibility map for HAZ. The test first runs a thermal cycle with three different peak temperatures (1335, 1275, and 1150 °C) to duplicate representative HAZ subzone microstructures, followed by time-to-failure examination under a variety of pre-stress (260–600 MPa) and pre-strain conditions (0.03–0.19) as a function of reheat temperatures between 750 and 1050 °C. With the aid of FEM, SRC susceptibility maps are generated to identify the threshold stress, plastic strain, and creep strain as a function of test temperature. It was found out that HAZ subzone with a lower peak temperature (1150 °C) appears to be slightly less susceptible to SRC than the other two subzones that experienced higher peak temperatures. Generally, time-to-fracture reduces with increasing initially applied stress and strain for all test temperatures. The pre-stress thresholds decrease from about 500 to 330 MPa as the testing temperature increases from 800 to 1050 °C, while the corresponding initial plastic strain thresholds reduces from 0.15 to 0.06. The SRC susceptibility was also evaluated through the Larson–Miller Parameter (LMP) analysis as a function of plastic strain, initial stress and starting stress upon reaching the testing temperature, respectively. The 1050 °C test with a high pre-applied strain (0.1) exhibits an extremely short time to failure (t = 3 s) that lies outside the general trend in LMP analysis. Additionally, it was identified that a plastic strain above 0.07 is identified to significantly reduce the bulk creep strain tolerance to fracture and therefore increases SRC susceptibility. Hardness measurement and fractography analysis indicated that the strain aging of niobium carbonitrides and other potential phases in conjunction with intergranular precipitates contributes to an increase in microhardness and increased intergranular cracking susceptibility.

14 SOLAR ENERGY↗

RESIDUAL STRESSES IN 3013 CONTAINERS

The DOE Complex is packaging plutonium-bearing materials for storage and eventual disposition or disposal. The materials are handled according to the DOE-STD-3013 which outlines general requirements for stabilization, packaging and long-term storage. The storage vessels for the plutonium-bearing materials are termed 3013 containers. Stress corrosion cracking has been identified as a potential container degradation mode and this work determined that the residual stresses in the containers are sufficient to support such cracking. Sections of the 3013 outer, inner, and convenience containers, in both the as-fabricated condition and the closure welded condition, were evaluated per ASTM standard G-36. The standard requires exposure to a boiling magnesium chloride solution, which is an aggressive testing solution. Tests in a less aggressive 40% calcium chloride solution were also conducted. These tests were used to reveal the relative stress corrosion cracking susceptibility of the as fabricated 3013 containers. Significant cracking was observed in all containers in areas near welds and transitions in the container diameter. Stress corrosion cracks developed in both the lid and the body of gas tungsten arc welded and laser closure welded containers. The development of stress corrosion cracks in the as-fabricated and in the closure welded container samples demonstrates that the residual stresses in the 3013 containers are sufficient to support stress corrosion cracking if the environmental conditions inside the containers do not preclude the cracking process.

42 ENGINEERING↗

Utah FORGE 2-2439v2: Characterizing In-Situ Stress with Laboratory Modelling and Field Measurements - 2024 Annual Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the Utah FORGE Site: Laboratory Modelling and Field Measurements project by The University of Pittsburgh, presented by Andrew Bunger. The project characterizes the stress in the Utah FORGE EGS reservoir using three methods: Method 1: Demonstrate complimentary laboratory rock-core stress estimation combined with Machine Learning approach for measuring in-situ stress from field sonic log data; Method 2: Complete field based in-situ measurement (mini-frac); and Method 3: Develop a mechanics-based method for connection near wellbore stress measurements to stresses away from the well-bore. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 14, 2024.

15 GEOTHERMAL ENERGY↗

Earthquake stress via event ratio levels: Application to the 2011 and 2016 Oklahoma seismic sequences

Abstract We develop a new methodology for determining earthquake stress drop and apparent stress values via spectral ratio asymptotic levels. With sufficient bandwidth, the stress ratio for a pair of events can be directly related to these low‐ and high‐frequency levels. This avoids the need to assume a particular spectral model and derive stress drop from cubed corner frequency measures. The method can be applied to spectral ratios for any pair of closely related earthquakes and is particularly well suited for coda envelope methods that provide good azimuthally averaged, point‐source measures. We apply the new method to the 2011 Prague and 2016 Pawnee earthquake sequences in Oklahoma. The sequences show stress scaling with size and depth, with the largest events having apparent stress levels near 1 MPa and smaller and/or shallower events having systematically lower stress values.

58 GEOSCIENCES↗

Constraints on Friction, Dilatancy, Diffusivity, and Effective Stress From Low-Frequency Earthquake Rates on the Deep San Andreas Fault

Families of recurring low-frequency earthquakes (LFEs) within nonvolcanic tremor on the San Andreas Fault in central California are sensitive to tidal stresses. LFEs occur at all levels of the tides, are strongly correlated and in phase with the ~200 Pa shear stresses, and weakly and not systematically correlated with the ~2 kPa tidal normal stresses. Here, we assume that LFEs are small sources that repeatedly fail during shear within a much larger scale, aseismically slipping fault zone and consider two different models of the fault slip: (1) modulation of the fault slip rate by the tidal stresses or (2) episodic slip, triggered by the tides. LFEs are strongly clustered with duration much shorter than the semidiurnal tide; they cannot be significantly modulated on that time scale. The recurrence times of clusters, however, are many times longer than the semidiurnal, leading to an appearance of tidal triggering. In this context we examine the predictions of laboratory-observed triggered frictional (dilatant) fault slip. The undrained end-member model produces no sensitivity to the tidal normal stress, and slip onsets are in phase with the tidal shear stress. The tidal correlation constrains the diffusivity to be less than ~1 × 10 -6 /s and the product of the friction and dilatancy coefficients to be at most 5 × 10 -7 , orders of magnitude smaller than observed at room temperature. In the absence of dilatancy the effective normal stress at failure would be about ~55 kPa. Finally, for this model the observations require intrinsic weakness, low dilatancy, and lithostatic pore fluid.

58 GEOSCIENCES↗

Accelerated Stress Testing of Perovskite Photovoltaic Modules: Differentiating Degradation Modes with Electroluminescence Imaging

Herein, electroluminescence (EL) and thermal imaging are used to examine p–i–n metal halide perovskite (MHP) photovoltaic (PV) mini-modules (MA0.6FA0.4PbI3, 20 cells, 78 cm2) before and after indoor-accelerated stress testing or outdoor deployment. Distinct spatial patterns in the EL images emerge, which depend on the external stress conditions experienced by the mini-module. Imaging results highlight a distribution of dark speckle features that dominate after UV stress, attributed to widespread interfacial contact degradation. Lateral intensity gradients across cells dominate after thermal cycling (TC) stress, attributed to current crowding near scribe defects. While current–voltage analysis alone does not give full insight on the degradation process, this study shows that distinct degradation modes can be further defined by multimodal electro-optical imaging (i.e., EL combined with photoluminescence and dark lock-in thermography). Neither UV exposure nor TC-accelerated stress testing alone replicates the same degradation signatures observed after outdoor deployment, suggesting that multiple degradation modes occur under concurrent stressors outdoors. Finally, spatial characterization of degradation modes in MHP PV mini-modules before and after accelerated stress testing lays the groundwork for developing targeted accelerated stress testing procedures through comparison with outdoor aging.

14 SOLAR ENERGY↗

Crystal plasticity model of residual stress in additive manufacturing using the element elimination and reactivation method

Selective laser melting is receiving increasing interest as an additive manufacturing technique. Residual stresses induced by the large temperature gradients and inhomogeneous cooling process can favour the generation of cracks. In this work, a crystal plasticity finite element model is developed to simulate the formation of residual stresses and to understand the correlation between plastic deformation, grain orientation and residual stresses in the additive manufacturing process. The temperature profile and grain structure from thermal-fluid flow and grain growth simulations are implemented into the crystal plasticity model. An element elimination and reactivation method is proposed to model the melting and solidification and to reinitialize state variables, such as the plastic deformation, in the reactivated elements. The accuracy of this method is judged against previous method based on the stiffness degradation of liquid regions by comparing the plastic deformation as a function of time induced by thermal stresses. The method is used to investigate residual stresses parallel and perpendicular to the laser scan direction, and the correlation with the maximum Schmid factor of the grains along those directions. The magnitude of the residual stress can be predicted as a function of the depth, grain orientation and position with respect to the molten pool. The simulation results are directly comparable to X-ray diffraction experiments and stress–strain curves.

316 stainless steel↗

Closure of Fracture Due to Cover Stress Re-establishment After Coal Mining

In situ measurements of deformations, stresses, and closure of fractures, affecting water inflow following coal mining, are challenging due to the inaccessibility of fractured rock. Here, the authors studied the closure process of the fractured rock mass with the cover stress re-establishment based on a theoretical analysis and a scale model testing. A quantitative analysis is used to study the fracture distribution in the fractured zone. A function to describe a fracture aperture distribution in the fractured zone is proposed, which takes into account the curvature and thickness of the fractured rock. The theoretical analysis and a scale model testing both indicate that the cover stress re-establishment with mining distance increasing and the relationship between the fracture closure and cover stress re-establishment both satisfy a logarithmic function. The scale model test also shows the following features: (1) the fracture ratio (which is the fracture area divided by the total area of fracture and intact rock with a unit width in the vertical or horizontal direction) in the lower part of the fractured rock mass is greater than that in the upper part; (2) the initially fast decreased of fracture ratios is then followed by a slower decrease during the cover stress re-establishment process; (3) in the upper part of the rock mass, the vertical directional fractures with small apertures are being closed with cover stress re-establishment, which indicates an increase in the water resistance reducing the seepage from these parts of the fractured zone. This study improves the general understanding of the fracture closure process and cover stress re-establishment in the fractured rock mass after coal mining ceased, and provides a theoretical basis for water resource protection in case of underground coal mining.

58 GEOSCIENCES↗

Residual Stress Measurements in Extreme Environments for Hazardous, Layered Specimens

In nuclear fuel plates of low-enriched U-10Mo (LEU) clad with aluminum by hot isostatic pressing (HIP), post-irradiation stresses arising during reactor shutdown are a major concern for safe reactor operations. Measurement of those residual stresses has not previously been possible because the high radioactivity of the plates requires handling only by remote manipulation in a hot cell. The incremental slitting method for measuring through-thickness stress profiles was modified, and a system for automated, remote operation was built and tested. Experimental modifications consisted of replacing electric-discharge machining (EDM) with a small end mill and strain-gauge measurements with cantilever displacement measurements. The inverse method used to calculate stresses was the pulse-regularization method modified to allow discontinuities across material interfaces. The new system was validated by comparing with conventional slitting on a depleted U-10Mo (DU) fuel plate. The new system was applied to two measurements each on six as-fabricated (pre-irradiation) LEU miniature fuel plates. Variations between the measurements at two locations in the same plate were strongly correlated with measured geometrical heterogeneity in the plate—a tilt in the fuel foil. Compressive stresses in the U-10Mo were shown to increase from 20 to 250 MPa as the ratio of aluminum thickness to U-10Mo thickness increased causing increased constraint during cooling. Faster cooling rates during processing also increased stress magnitudes. The measurements trends agreed with data in the literature from similar plates made with DU, which further validates the method. Because other methods are impractical in a hot cell, the modified slitting method is now poised for the first measurements of post-irradiation stresses.

36 MATERIALS SCIENCE↗

Effects of Nozzle Radial Position, Separation Angle, and Gas Flow Partitioning on the Mixing, Eye Area, and Wall Shear Stress in Ladles Fitted with Dual Plugs

Mixing time, slag eye area, and wall shear stress in a ladle fitted with dual plugs have been studied as a function of operating variables, namely, gas flow rate, radial nozzle position, separation angle between nozzles and flow rate partitioning. While the mixing time and slag eye area have been experimentally investigated in a scaled water model (with and without a top slag layer), the shear stress on the vessel wall has been studied computationally via a RANS-based turbulent, three-dimensional coupled Eulerian–Lagrangian (VOF-DPM), multiphase flow model. Experimental and computational results have indicated that the mixing, eye area, and wall shear stress depend on the gas flow rate, i.e., while mixing efficiency increases with the increasing gas flow rate, the slag eye area, and wall shear stress, in contrast, become more pronounced with the increasing gas flow, leading to an undesirable operating regime. The radial nozzle position, separation angle between the nozzles and flow rate partitioning at any given flow rate also influence the ladle process performance, influencing the mixing, eye area, and wall shear stress, albeit to a varied degree. Within the range of operating conditions studied, an expected inverse correspondence between mixing time and shear behavior was observed. Experimental and computational results in conjunction have indicated that the best arrangement of porous plugs or gas injection nozzles for superior ladle process performance is dependent on the gas flow rate and is specific to the desired objective (i.e., decreasing the mixing time, or slag eye area and wall shear stress). Hence, a unique gas injection practice cannot and should not be suggested as the optimum for ladle metallurgy in steelmaking. Nevertheless, if the mixing time is the parameter of primary interest, a nozzle configuration with equal flow partitioning (1:1) between the nozzles and identical nozzle radial positions (0.7R/0.7R, 45 deg) should suffice for both low and high gas flow rates. In contrast, a nonidentical nozzle radial position (0.7R/0.5R, 90 deg) and an unequal gas flow rate per nozzle (1:3) appear preferable if both ladle eye and shear stresses, rather than mixing, are the issues of concern.

36 MATERIALS SCIENCE↗

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Selective laser melting (SLM) process is characterized by large temperature gradients resulting in high levels of residual stress within the additively manufactured metallic structure. SLM-processed Ti6Al4V yields a martensitic microstructure due to the rapid solidification and results in a ductility generally lower than a hot working equivalent. Post-process heat treatments can be applied to SLM components to remove in-built residual stress and improve ductility. Residual stress buildup and the mechanical properties of SLM parts can be controlled by varying the SLM process parameters. This investigation studies the effect of layer thickness on residual stress and mechanical properties of SLM Ti6Al4V parts. This is the first-of-its kind study on the effect of varying power and exposure in conjunction with keeping the energy density constant on residual stress and mechanical properties of SLM Ti6Al4V components. It was found that decreasing power and increasing exposure for the same energy density lowered the residual stress and improved the % elongation of SLM Ti6Al4V parts. Increasing layer thickness resulted in lowering the residual stress at the detriment of mechanical properties. The study is based on detailed experimental analysis along with finite element simulation of the process using ABAQUS to understand the underlying physics of the process.

36 MATERIALS SCIENCE↗

Raman Strain Sensing and Interfacial Stress Transfer of Hierarchical CNT-Coated Carbon Fibers

Hierarchical reinforcements of carbon fibers (CFs) coated with carbon nanotubes (CNTs) were produced via two different methodologies, namely chemical vapor deposition (CVD) and wet chemical treatment. These advanced smart structural materials are possible candidates for inherent strain sensing and improved interfacial properties when incorporated in the volume of structural fiber-reinforced polymer composites. The morphology and wetting properties of the hierarchical CFs were evaluated via SEM and contact angle measurements. Enhanced values in the strain-induced Raman sensing ability of the hierarchical reinforcement produced via CVD in comparison with the uncoated fibers were measured at single fiber level. The residual stress transfer profiles of both the hierarchical and the uncoated carbon fibers were also evaluated using the Raman spectroscopy in order to evaluate the phase interaction in the hierarchical structure. Compressive residual stresses in the order of 1.5 GPa were found to act on the CF surfaces, while tensile residual stresses were measured for both the CNT-coated systems. The effects of the preparation process of the CNT coatings on the residual stress profiles were also prominent, with the CVD-grown coatings resulting in higher tensile residual stresses, 1.76 GPa instead of 1.22 GPa for the coatings produced via wet chemical treatment. The change in the residual stress profiles established the interaction between the CFs and the CNTs via an anchoring mechanism which significantly altered the stress field at the vicinity of the interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Variation of the Corrosion Behavior Prior to Crack Initiation of E690 Steel Fatigued in Simulated Seawater with Various Cyclic Stress Levels

The electrochemical process and corrosion behavior prior to crack initiation of E690 steel fatigued in simulated seawater are investigated under different cyclic stress levels by methods of electrochemical impedance spectroscopy, cyclic current response, electrochemical noise and morphology observation. The results show that the electrochemical behavior changes with the peak stress of cyclic loading and the corrosion behavior transforms as the peak stress increases over the proof strength. The charge transfer resistance (R{sub ct}) decreases with elevated peak stress. Continuous decreasing R{sub ct} with cycling number under peak stress of 1.02 σ{sub p0.2} indicates that continuous fresh metal induced by work-softening is exposed to the seawater, which is also proved by cyclic current response induced by cyclic stress and contact angle test. As a result, the corrosion type of E690 steel changes from general corrosion to pitting corrosion with the peak stress close to and above the proof strength. That induces the corrosion fatigue crack initiation mechanism to change correspondingly.

36 MATERIALS SCIENCE↗

A Two-Stage Physical-Based Model for Predicting Flow Stress of As-cast TiAl Alloy Under Hot Deformation Conditions

The hot deformation behavior of Ti-30Al-4.2Mn-4.5Nb-0.2B alloy was investigated using the isothermal compression experiment at temperatures of 1020-1200 °C and strain rates of 0.001-1 s{sup −1}. The flow stress was sensitive to the deformation parameters like temperature and strain rate, which decreases with the increase in temperature and decrease in strain rates. Based on the true stress-true strain data, a two-stage physical-based model was proposed to describe the flow stress curve of as-cast TiAl alloy during hot deformation process. For establishing the model, at first, the flow curves of dynamic recovery (DRV) were modeled by employing stress-dislocation relation and adjusting dislocation annihilation coefficient Ω. Then, the flow curves of dynamic recrystallization (DRX) were modeled by considering the dynamic softening behavior into Avrami equation. Finally, the flow curves in the entire deformation stages could be described by embedding the predicted data of DRV model (i.e., flow stress before the critical strain) into the predicted data by DRX model (i.e., flow stress after the critical strain). The critical strain for initiation of DRX was determined by the double-differentiation method. To evaluate the applicability and effectiveness of DRX kinetics equation, the DRX curves were calculated and were consistent with the microstructure observation. Comparison between the experimental and predicted data shows that the proposed physical-based model can well forecast the flow stress under a wide working domain.

36 MATERIALS SCIENCE↗

Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

Cold rolling can be used in-process or post-process to improve microstructure, mechanical properties and residual stress in directed-energy-deposition techniques, such as the high deposition rate wire + arc additive manufacturing (WAAM) process. Finite element simulations of the rolling process are employed to investigate the effect of rolling parameters, in particular rolling load and roller profile radius on the residual stress field as well as plastic strain distribution for the profiled roller. The results show the response to rolling of commonly used structural metals in WAAM, i.e., AA2319, S335JR steel and Ti-6Al-4V, taking into account the presence of residual stresses. The rolling load leads to changes in the location and the maximum value of the compressive residual stresses, as well as the depth of the compressive residual stresses. However, the roller profile radius only changes the maximum value of these compressive residual stresses. Changing the rolling load influences the equivalent plastic strain close to the top surface of the wall as well as in deeper areas, whereas the influence of the roller profile radius is negligible. The plastic strain distribution is virtually unaffected by the initial residual stresses prior to rolling. Finally, design curves were generated from the simulations for different materials, suggesting ideal rolling load and roller profile combinations for microstructural improvement requiring certain plastic strains at a specific depth of the additive structure.

36 MATERIALS SCIENCE↗