Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLIDIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Thermoelectric and morphological effects of Peltier pulsing on directional solidification of eutectic Bi-Mn

Extensive in situ thermal measurements using Peltier Interface Demarcation (PID) during directional solidification of eutectic Bi/MnBi were carried out. Observations indicate that significant thermal transients occur throughout the sample as a result of the Peltier pulsing. The contributions of the Peltier, Thomson, and Joule heats were separated and studied as a function of pulse intensity and polarity. The Joule and the combined Peltier and Thomson thermal contributions were determined as a function of time during and after the current pulses, close to the solid/liquid interface. Variations of the Bi/MnBi particle morphology clearly reveal the interface shape, changes in interface velocity, meltback, and temporary loss of cooperative growth, as a result of the pulsing.

Silberstein, R. P.↗
NASA NTRS1984

The mechanisms of formation and prevention of channel segregation during alloy solidification

Using a base chilled configuration, conditions for the formation and prevention of segregation channels are studied in the ammonium chloride-water and lead-tin systems. Such channels develop when the rejected solute is less dense than the solvent and are therefore a result of density inversion, but slow (less than 5 rpm) rates of mold rotation, about axes inclined to the vertical by 20 to 30 deg, throughout the time of solidification, effectively prevent the formation or propagation of these channels. In experiments with artificially created or blocked channels, a simultaneous solute plume in the bulk liquid must be present in order for a channel to develop. The results indicate that channels originate not within the dendritic array, but immediately ahead of the growth front as a result of perturbation from the less dense boundary layer into the bulk liquid. The effect of mold movement is to translate laterally the bulk liquid relative to the growth front so that perturbations are sheared off. The nature of the liquid movement is considered and shown to be a function of the mold dimensions.

Hellawell, A.↗
NASA NTRS1985

Analysis of three-dimensional solidification interface shape

The determination of the shape of the solidification interface in a cooling melt by the thermal boundary conditions is investigated analytically, extending the analysis of Siegel (1982) and Siegel and Sosoka (1982) to the three-dimensional case. The solutions are generated by continuation into the solid region from conditions at the cooled wall, and some numerical results are presented in tables and graphs. These findings and the analytical approach employed are applicable to crystallization and metal-forming processes.

Siegel, R.↗
NASA NTRS1985

Dendritic solidification. I - Analysis of current theories and models. II - A model for dendritic growth under an imposed thermal gradient

A critical review of the present dendritic growth theories and models is presented. Mathematically rigorous solutions to dendritic growth are found to rely on an ad hoc assumption that dendrites grow at the maximum possible growth rate. This hypothesis is found to be in error and is replaced by stability criteria which consider the conditions under which a dendrite tip advances in a stable fashion in a liquid. The important elements of a satisfactory model for dendritic solidification are summarized and a theoretically consistent model for dendritic growth under an imposed thermal gradient is proposed and described. The model is based on the modification of an analysis due to Burden and Hunt (1974) and predicts correctly in all respects, the transition from a dendritic to a planar interface at both very low and very large growth rates.

Laxmanan, V.↗
NASA NTRS1984

Solidification interface shape for continuous casting in an offset mold - Two analytical methods

A solution method for finding the unknown solidification interface in manufacturing slab ingots as a continuous casting is presented, which involves a product solution in the potential plane and the use of conjugate harmonic functions. It is argued that the method may be more direct for some geometries than the Cauchy boundary value method. Moreover, the usefulness of the Cauchy boundary value method is demonstrated through the example of a nonsymmetric horizontal mold where the walls are offset to support the lower ingot boundary.

Siegel, R.↗
NASA NTRS1985

Formation of metallic and metallic-glass hollow spheres and their solidification characteristics

Various metals and metallic glass systems have bene processed into hollow spheres with sizes ranging from 3 mm to 440 microns in diameter. The technique for the formation of the large hollow spheres, in general, is based on the fluid-dynamic instability of a hollow annular jet. A refined technique has also been developed for microshell formation, in which discrete bubbles are injected into the stream of the molten material and individually 'flushed' out at a frequency related to the Rayleigh jet instability. The surfaces of those spheres of all sizes exhibit a range of contrasting solidification behaviors and characteristics. Metal shells of varying materials, sizes, aspect ratios, sphericity and concentricity have many useful and novel applications.

Lee, M. C.↗
NASA NTRS1985

Modeling Directional Solidification

The objective of the research is to develop tools of use in explaining the results of directional solidification experiments in space. These tools consist of mathematical and experimental models. Experiments are also being flown at low-g to validate the ground-based results. Many metals and semiconductors directionally solidified in space had a diameter less than that of the containing ampoule. In fact this occurred whenever the ampoule contained a gas space. This phenomenon has been attributed in a vague way to lack of wetting of the ampoule wall by the melt. The actual liquid behavior by use of low temperature analogs is being observed aboard the KC-135. In the first flight, water was placed in plastic ampoules (not wet) with ceramic end plugs which were wet by the water to simulate a solid-liquid interface. Unfortunately during storage prior to the flight the water began to wet the ampoule wall. Discrete bubbles formed down the axis of the ampoules. New ampoule materials are being used now, with testing for stability prior to the next flight. A theoretical model has also been developed for this phenomenon.

Wilcox, W. R.↗
NASA NTRS1985

The Development and Prevention of Channel Segregation During Alloy Solidification

During alloy solidification, interdendritic microsegregation causes density differences between entrapped liquid and bulk liquid which provides a driving force for convection. One of the consequences of this effect is the formation of long, nearly vertical liquid channels, rich in solute, flowing through the solid-liquid mushy zone somewhat as a river and tributary system. In ingot castings where the heat flow is vertically downwards and the solute less dense than the solute the convective flow is antiparallel with the flow caused by contraction on freezing. Identification of the mechanisms involved in these two problems is discussed. It is known that certain types of bulk liquid movements can inhibit channel development and the mechanism by which they do so are examined.

Hellawell, A.↗
NASA NTRS1986

A model for the influence of pressure on the bulk modulus and the influence of temperature on the solidification pressure for liquid lubricants

Two pressure chambers, for compression experiments with liquids from zero to 2.2 GPa pressure, are described. The experimentally measured compressions are then compared to theoretical values given by an isothermal model of equation of state recently introduced for solids. The model describes the pressure and bulk modulus as a function of compression for different types of lubricants with a very high accuracy up to the pressure limit of the high pressure chamber used (2.2 GPa). In addition the influence of temperature on static solidification pressure was found to be a simple function of the thermal expansion of the fluid.

Jacobson, B. O.↗
NASA NTRS1985

High gradient directional solidification furnace

A high gradient directional solidification furnace is disclosed which includes eight thermal zones throughout the length of the furnace. In the hot end of the furnace, furnace elements provide desired temperatures. These elements include Nichrome wire received in a grooved tube which is encapsulated y an outer alumina core. A booster heater is provided in the hot end of the furnace which includes toroidal tungsten/rhenium wire which has a capacity to put heat quickly into the furnace. An adiabatic zone is provided by an insulation barrier to separate the hot end of the furnace from the cold end. The old end of the furnace is defined by additional heating elements. A heat transfer plate provides a means by which heat may be extracted from the furnace and conducted away through liquid cooled jackets. By varying the input of heat via the booster heater and output of heat via the heat transfer plate, a desired thermal gradient profile may be provided.

Aldrich, B. R.↗
NASA NTRS1986

An exact solution for the solidification of a liquid slab of binary mixture

The time dependent temperature and concentration profiles of a one dimensional finite slab of a binary liquid alloy is investigated during solidification. The governing equations are reduced to a set of coupled, nonlinear initial value problems using the method outlined by Meyer. Two methods will be used to solve these equations. The first method uses a Runge-Kutta-Fehlberg integrator to solve the equations numerically. The second method comprises of finding closed form solutions of the equations.

Antar, B. N.↗
NASA NTRS1986

Existence of needle crystals in local models of solidification

The way in which surface tension acts as a singular perturbation to destroy the continuous family of needle-crystal solutions of the steady-state growth equations is analyzed in detail for two local models of solidification. All calculations are performed in the limit of small surface tension or, equivalently, small velocity. The basic mathematical ideas are introduced in connection with a quasilinear, isotropic version of the geometrical model of Brower et al., in which case the continuous family of solutions dissappears completely. The formalism is then applied to a simplified boundary-layer model with an anisotropic kinetic attachment coefficient. In the latter case, the solvability condition for the existence of needle crystals can be satisfied whenever the coefficient of anisotropy is arbitrarily small but nonzero.

Langer, J. S.↗
NASA NTRS1986

Solvability condition for needle crystals at large undercooling in a nonlocal model of solidification

It is explicitly shown that, in a realistic model of diffusion-controlled dendritic solidification, Ivantsov's continuous family of steady-state needle crystals is destroyed by the addition of surface tension. The starting point is in the exact integro-differential equation for the one-sided model, in two dimensions, in a moving frame of reference. In the limit of large undercooling, where the range of the diffusion field is much smaller than the radius of curvature of the tip of the needle, this problem is reduced to a linear, inhomogeneous differential equation of infinite order. A solvability condition for this equation is derived and it is shown that solutions cease to exist for arbitrarily small but finite isotropic surface tension.

Caroli, B.↗
NASA NTRS1985

Effects of supercooling in the initial solidification of PbTe-SnTe solid solutions

Deviations from compositions anticipated by the thermal equilibrium phase diagram have been observed in Bridgman-grown crystals of Pb(1-x)Sn(x)Te, in the first to freeze region of the boule. A set of experiments were conducted to determine the extent of thermal supercooling of Pb(1-x)Sn(x)Te in a Bridgman-like configuration. The results of the compositional profiles and the supercooling measurements are consistent with a diffusionless transformation occurring at the onset of solidification, and the length of uncontrolled growth is inversely related to the temperature gradient of the furnace.

Fripp, A. L.↗
NASA NTRS1986

Noise-driven sidebranching in the boundary-layer model of dendritic solidification

In the context of local models of solidification, it is suggested that the sidebranching which appears to be a characteristic feature of dendritic processes may be generated by selective amplification of noise near the tip and that, under some circumstances, thermal fluctuations may be strong enough to explain the observed effects. This proposal is discussed based on the two-dimensional boundary-layer model with kinetic crystalline anisotropy. Experimental methods to distinguish this stochastic process from a deterministic, dynamical sidebranching mechanism are suggested, including the possibility of space-based experiments.

Pieters, R.↗
NASA NTRS1987

Solidification Effects in MAR-M246(Hf) Alloy

Fatigue properties degraded with crystallographic orientations greater than 10 degrees from {001} axis. Influence of solidification and heat-treatment parameters on structure and fatigue properties of nickel-based superalloy MAR-M246(Hf) described in 24-page report. Superalloys have high strength and corrosion resistance at temperatures up to 1,400 degrees C; their uses range from petrochemical equipment to marine, industrial, aircraft, and vehicular gas turbines.

Johnston, M. H.↗
NASA NTRS1987

Effects of Low Gravity on Superalloy Solidification

Report describes experiments on directional solidification on MAR-M246(Hf) superalloy in low gravity. Determines effects of reduction in gravity on growth of dendrites and on resultant interdendritic segregation of various constituents, particularly of additive hafnium. Interdendritic spacings and carbide contents increase.

Johnston, M. H.↗
NASA NTRS1986

The mathematical modeling of rapid solidification processing

The detailed formulation of and the results obtained from a continuum mechanics-based mathematical model of the planar flow melt spinning (PFMS) rapid solidification system are presented and discussed. The numerical algorithm proposed is capable of computing the cooling and freezing rates as well as the fluid flow and capillary phenomena which take place inside the molten puddle formed in the PFMS process. The FORTRAN listings of some of the most useful computer programs and a collection of appendices describing the basic equations used for the modeling are included.

Gutierrez-Miravete, E.↗