Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILVER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Raman Scattering of Light by Molecules of Methyl Orange Dye on the Surface of Silicon Containing Ion-Synthesized Silver Nanoparticles

The possibility of using a new composite material based on porous silicon containing silver nanoparticles and synthesized by means of a unique implantation nanotechnology as an optically sensitive material in biological and chemical sensors is tested experimentally. It is demonstrated that detection of small amounts of the studied organic substance (methyl orange dye) is possible due to the effect of surface-enhanced Raman scattering (SERS) from the molecules affected by the local electromagnetic field of the silver nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic Absorption Spectra of Neutral and Charged Silver Molecular Clusters

The structural, energy, and optical properties of charged and neutral molecular clusters (MCs) of silver Ag{sub n} (n = 2–5) have been simulated within the density functional theory (DFT). It has been shown that the electronic absorption spectrum of neutral MCs is shifted toward lower energies compared to the charged ones. The strengths of the oscillators of neutral MCs are mainly larger than the ones of charged MCs. A comparison of the simulation results with the previously obtained experimental ones for glasses with silver MCs has been carried out.

74 ATOMIC AND MOLECULAR PHYSICS↗

Formation of ultrasmooth thin silver films by pulsed laser deposition

Ultrasmooth thin silver films have been formed on a quartz substrate with a buffer yttrium oxide layer by pulsed laser deposition. The dependence of the surface morphology of the film on the gas (N{sub 2}) pressure in the working chamber and laser pulse energy is investigated. It is found that the conditions of film growth are optimal at a gas pressure of 10{sup -2} Torr and lowest pulse energy. The silver films formed under these conditions on a quartz substrate with an initial surface roughness of 0.3 nm had a surface roughness of 0.36 nm. These films can be used as a basis for various optoelectronics and nanoplasmonics elements.

36 MATERIALS SCIENCE↗

Donor doping of single-walled carbon nanotubes by filling of channels with silver

The channels of single-walled carbon nanotubes (SWNTs) are filled with metallic silver. The synthesized nanocomposites are studied by Raman spectroscopy and optical absorption spectroscopy, and these data indicate a substantial modification of the electronic structure of the nanotubes upon their filling. Moreover, X-ray photoelectron spectroscopy shows that the incorporation of the metal leads to a change in the work function of SWNTs due to the Fermi level upshift and to the transfer of an electron density from inserted nanoparticles to the nanotube walls. Thus, the filling of the channels with silver results in donor doping of the nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diffusion of silver over atomically clean silicon surfaces

The diffusion of silver the (111), (100), and (110) silicon surfaces is studied by Auger electron spectroscopy and low-energy electron diffraction. The mechanisms of diffusion over the (111) and (110) surfaces are revealed, and the temperature dependences of diffusion coefficients are measured. An anisotropy of silver diffusion over the (110) surface is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver diffusion over silicon surfaces with adsorbed tin atoms

Silver diffusion over the (111), (100), and (110) surfaces of silicon with preliminarily adsorbed tin atoms is studied by Auger electron spectroscopy and low-energy electron diffraction. Diffusion is observed only on the surface of Si(111)-2√3 × 2√3-Sn. The diffusion mechanism is established. It is found that the diffusion coefficient depends on the concentration of diffusing atoms. The diffusion coefficient decreases with increasing silver concentration, while the activation energy and the preexponential factor increase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectral-Kinetic Properties of Nanosized Nickel Phthalocyanine Films on Silver Nanoparticle Monolayers

We have investigated spectral and spectral-kinetic properties of hybrid (organic semiconductor-plasmonic metal) nanocomposites on the base of silver nanoparticle monolayers and thin nickel phthalocyanine (NiPc) films. The spectroscopic results obtained by the femtosecond pump-probe technique demonstrate an enhancement of the fast optical response in the range of long-wavelength NiPc electronic absorption bands when the NiPc thin films contact with silver nanoparticles. This could be assigned to the plasmon-related modification and the enhancement of hybrid structures absorption at its steady-state absorption spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Particle Size and Specific Surface Area on the Determination of the Density of Nanocrystalline Silver Sulfide Ag{sub 2}S Powders

The effect of the particle size and specific surface area of silver sulfide powders on their density measured by the helium pycnometry method has been studied. Powders with different average particle sizes have been synthesized by hydrochemical deposition. The particle size of the silver sulfide powders has been determined by the Brunauer–Emmett–Teller method according to molecular nitrogen adsorption isotherms and, in the case of fine powders, by X-ray diffraction analysis according to diffraction reflection broadening. It has been shown that the density of the fine powders measured by helium pycnometry is underestimated compared with the true density, owing to the adsorption of helium by the highly developed surface of these powders.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Formation of Porous Germanium Layers by Silver-Ion Implantation

We propose a method for the formation of porous germanium (P-Ge) layers containing silver nanoparticles by means of high-dose implantation of low-energy Ag{sup +} ions into single-crystalline germanium (c-Ge). This is demonstrated by implantation of 30-keV Ag{sup +} ions into a polished c-Ge plate to a dose of 1.5 × 10{sup 17} ion/cm{sup 2} at an ion beam-current density of 5 μA/cm{sup 2}. Examination by high-resolution scanning electron microscopy (SEM), atomic-force microscopy (AFM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX) microanalysis, and reflection high-energy electron diffraction (RHEED) showed that the implantation of silver ions into c-Ge surface led to the formation of a P-Ge layer with spongy structure comprising a network of interwoven nanofibers with an average diameter of ∼10–20 nm Ag nanoparticles on the ends of fibers. It is also established that the formation of pores during Ag{sup +} ion implantation is accompanied by effective sputtering of the Ge surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low Concentrations of Silver Nanoparticles in Biosolids Cause Adverse Ecosystem Responses under Realistic Field Scenario

A large fraction of engineered nanomaterials in consumer and commercial products will reach natural ecosystems. To date, research on the biological impacts of environmental nanomaterial exposures has largely focused on high-concentration exposures in mechanistic lab studies with single strains of model organisms. These results are difficult to extrapolate to ecosystems, where exposures will likely be at low-concentrations and which are inhabited by a diversity of organisms. Here we show adverse responses of plants and microorganisms in a replicated long-term terrestrial mesocosm field experiment following a single low dose of silver nanoparticles (0.14 mg Ag kg −1 soil) applied via a likely route of exposure, sewage biosolid application. While total aboveground plant biomass did not differ between treatments receiving biosolids, one plant species, Microstegium vimeneum, had 32 % less biomass in the Slurry+AgNP treatment relative to the Slurry only treatment. Microorganisms were also affected by AgNP treatment, which gave a significantly different community composition of bacteria in the Slurry+AgNPs as opposed to the Slurry treatment one day after addition as analyzed by T-RFLP analysis of 16S-rRNA genes. After eight days, N 2 O flux was 4.5 fold higher in the Slurry+AgNPs treatment than the Slurry treatment. After fifty days, community composition and N 2 O flux of the Slurry+AgNPs treatment converged with the Slurry. However, the soil microbial extracellular enzymes leucine amino peptidase and phosphatase had 52 and 27% lower activities, respectively, while microbial biomass was 35% lower than the Slurry. We also show that the magnitude of these responses was in all cases as large as or larger than the positive control, AgNO 3 , added at 4-fold the Ag concentration of the silver nanoparticles.

biomass↗

The Speciation of Silver Nanoparticles in Antimicrobial Fabric Before and After Exposure to a Hypochlorite/Detergent Solution

Because of their antibacterial properties, silver nanoparticles are often used in consumer products. To assess environmental and/or human health risks from these nanoparticles, there is a need to identify the chemical transformations that silver nanoparticles undergo in different environments. Thus an antimicrobial sock material containing Ag nanoparticles was examined by X-ray absorption spectroscopy to identify the speciation of Ag. The material was exposed to a hypochlorite/detergent solution and subjected to agitation. An elemental Ag nanopowder was also exposed to the hypochlorite/detergent solution or to a 1 mol L{sup -1} NaCl solution. Results showed that the sock material nanoparticles consisted of elemental Ag. After exposure to the hypochlorite/detergent solution, a significant portion (more than 50%) of the sock nanoparticles were converted, in situ, to AgCl. Results from exposures to elemental Ag nanopowder suggest that an oxidation step is necessary for the elemental Ag nanoparticles to transform into AgCl as there was no evidence of AgCl formation in the presence of chloride alone. As a result, if Ag ions leach from consumer products, any chloride present may quickly scavenge the ions. In addition, the efficacy of Ag, as an antimicrobial agent in fabrics, may be limited, or even negated, after washing in solutions containing oxidizers as AgCl is much less reactive than Ag ion.

60 APPLIED LIFE SCIENCES↗

Aging of Iodine-Loaded Silver Mordenite in NO2

Used nuclear fuel facilities need to control and minimize radioactive emissions. Off-gas systems are designed to remove radioactive contaminants, such as 85Kr, 14C, 3H, and 129I. In an off-gas system, any capture material will be exposed to a gas stream for months at a time. This gas stream may be at elevated temperature and could contain water, NOx gas, or a variety of other constituents comprising the dissolver off-gas stream in a nuclear fuel reprocessing plant. For this reason, it is important to evaluate the effects of long-term exposure, or aging, on proposed capture materials. One material under consideration is reduced silver mordenite (Ag0Z), which is recognized for its efficient iodine capture properties. Iodine is immobilized on Ag0Z as AgI, a solid with low volatility (m.p. ≥ 500°C). The aim of this study was to determine whether extended aging at elevated temperature in a nominally 2% NO2 environment would result in a loss of immobilized iodine from this material due to either physical or chemical changes that might occur during aging. Charges of iodine-loaded reduced silver mordenite (I2-Ag0Z) were exposed to a 2% NO2 environment for 1, 2, 3, and 4 months at 150°C, then analyzed for iodine losses The aging study was completed successfully. The material did not visibly change color or form. The results demonstrate that no significant iodine loss was observed over the course of 4 months of 2% NO2 aging of I2-Ag0Z at elevated temperature within the margin of error and the variability (~10%) in the loading along the beds. This provides assurance that iodine will remain immobilized on Ag0Z during extended online use in an off-gas capture treatment system. Future tests should expose I2-Ag0Z to progressively more complex feed gases in an effort to accurately replicate the conditions expected in a reprocessing facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Magnetically Recoverable and Reusable Antimicrobial Nanocomposite Based on Activated Carbon, Magnetite Nanoparticles, and Silver Nanoparticles for Water Disinfection

Recent advancements in nanotechnology have led to the development of innovative, low-cost and highly efficient water disinfection technologies that may replace or enhance the conventional methods. In this study, we introduce a novel procedure for preparing a bifunctional activated carbon nanocomposite in which nanoscale-sized magnetic magnetite and antimicrobial silver nanoparticles are incorporated (MACAg). The antimicrobial efficacy of the nanocomposite was tested against Escherichia coli (E. coli). MACAg (0.5 g, 0.04% Ag) was found to remove and kill 10 6 –10 7 CFU (colony-forming units) in 30 min via a shaking test and the removing and killing rate of the nanocomposites increased with increasing silver content and decreased with increasing CFU. The inhibition zone tests revealed, among the relevant components, only Ag nanoparticles and Ag + ions showed antimicrobial activities. The MACAg was easily recoverable from treated water due to its magnetic properties and was able to remove and kill 10 6 CFU after multiple-repeated use. The MACAg nanocomposite also demonstrated its feasibility and applicability for treating a surface water containing 10 5 CFU. Combining low cost due to easy synthesis, recoverability, and reusability with high antimicrobial efficiency, MACAg may provide a promising water disinfection technology that will find wide applications.

36 MATERIALS SCIENCE↗

Preparation and visible-light activity of silver vanadate for the degradation of pollutants

Monoclinic structure silver vanadate Ag{sub 3}VO{sub 4} was prepared by hydrothermal process. The effects of the ratio of silver to vanadium in starting material, hydrothermal temperature on surface morphologies, structure and photoactivity of Ag{sub 3}VO{sub 4} for the decolorization azodye acid red B under visible irradiation were investigated. The Ag{sub 3}VO{sub 4} prepared in the excess vanadium at 160 deg. C for 48 h exhibited highest visible-light-driven activity. Excess vanadium in the preparation increased the crystallinity and suppressed the formation of grain boundaries, while the formation of Ag{sup 0} on the surface of the catalyst promoting the electron-hole separation and interfacial charge transfer, resulting in an increase in the photocatalytic activity. Furthermore, the activity of the Ag{sub 3}VO{sub 4} was increased by 11 times when NiO was loaded, which also shows high activities for the decomposition of phenol and aniline. It is possible due to the formation of a short-circuited microphotoelectrochemical cell enhancing the separation of photogenerated electron-hole pairs.

36 MATERIALS SCIENCE↗