Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Femtosecond laser-induced modification of potassium-magnesium silicate glasses: An analysis of structural changes by near edge x-ray absorption spectroscopy

The effects of femtosecond laser pulse irradiation on the glass structure of alkaline silicate glasses were investigated by x-ray absorption near edge structure spectroscopy using the beamline of the Physikalisch-Technische Bundesanstalt at the electron synchrotron BESSY II in Berlin (Germany) by analyzing the magnesium K-edge absorption peak for different laser fluences. The application of fluences above the material modification threshold (2.1 J/cm{sup 2}) leads to a characteristic shift of {approx}1.0 eV in the K-edge revealing a reduced ({approx}3%) mean magnesium bond length to the ligated oxygen ions (Mg-O) along with a reduced average coordination number of the Mg ions.

36 MATERIALS SCIENCE↗

Compositional dependence of the 1.8 {mu}m emission properties of Tm{sup 3+} ions in silicate glass

The compositional dependence of the 1.8 {mu}m emission properties of Tm{sup 3+} ion-doped lead silicate glasses is investigated. Judd-Ofelt parameters are calculated and their variation with different glass modifier ions is obtained. The Judd-Ofelt parameters increase with decreased modifier ionic radius. A large spontaneous emission probability and a large emission cross-section are found to be related with the strength of the modifier ion. Fluorescence spectra are analyzed using rate equations and compared with recorded data. The results are very close, indicating the reliability of this method. Non-radiative probability is deduced by fitting the fluorescence decay curve; it becomes smaller with increased ionic field strength. Energy transfer processes are studied using the extended overlap integral method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of synthesis methods on the morpho - structural and luminescent characteristics of rare earth silicate phosphors

Cerium activated yttrium silicate (Y{sub 2}SiO{sub 5}:Ce) phosphors were prepared by two different wet-chemical synthesis routes namely: simultaneous addition of reagents (SimAd) and solution combustion (SC) using yttriumcerium nitrate and urea as starting materials. TEOS or SiO{sub 2} fume were used as Si sources. A comparative study regarding the morpho-structural and luminescent properties of Y{sub 2}SiO{sub 5}:Ce phosphors is presented. The influence of the silicon source, same as the firing temperature on the samples characteristics were discussed. TG-SDTA, FT-IR, SEM, XRD and photoluminescence investigations were used to characterize the precursors and the corresponding phosphors.

36 MATERIALS SCIENCE↗

Atomically flat La-silicate/Si interface using tungsten carbide gate electrode with nano-sized grain

Interface properties of La-silicate gate dielectrics on Si substrates with W or nano-sized grain W{sub 2}C gate electrodes have been investigated. A low interface state density of 2.5 × 10{sup 11} cm{sup −2}/eV has been achieved with W{sub 2}C gate electrodes, which is one third of those with W gate electrode. An interface roughness of 0.33 nm with spatial frequency comparable to the grain size of W gate electrode has been observed. Besides, an atomically flat interface of 0.12 nm has been obtained with W{sub 2}C gate electrode. The origin of flat interface may be attributed to the elimination of inhomogeneous stress by grains in metal electrode.

36 MATERIALS SCIENCE↗

XRD, lead equivalent and UV-VIS properties study of Ce and Pr lead silicate glasses

In this work, Cerium (Ce) and Praseodymium (Pr) containing lead silicate glasses were produced with 2 different molar ratios low (0.2 wt%) and high (0.4wt%). These types of glasses can satisfy the characteristics required for radiation shielding glasses and minimize the lead composition in glass. The radiation shielding properties of the synthesized glasses is explained in the form of lead equivalent study. The XRD diffraction and UV-VIS analysis were performed to observe the structural changes of the synthesis glasses at 1.5 Gy gamma radiation exposures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High pressure elastic properties of minerals from ab initio simulations: The case of pyrope, grossular and andradite silicate garnets

A computational strategy is devised for the accurate ab initio simulation of elastic properties of crystalline materials under pressure. The proposed scheme, based on the evaluation of the analytical stress tensor and on the automated computation of pressure-dependent elastic stiffness constants, is implemented in the CRYSTAL solid state quantum-chemical program. Elastic constants and related properties (bulk, shear and Young moduli, directional seismic wave velocities, elastic anisotropy index, Poisson's ratio, etc.) can be computed for crystals of any space group of symmetry. We apply such a technique to the study of high-pressure elastic properties of three silicate garnet end-members (namely, pyrope, grossular, and andradite) which are of great geophysical interest, being among the most important rock-forming minerals. The reliability of this theoretical approach is proved by comparing with available experimental measurements. The description of high-pressure properties provided by several equations of state is also critically discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intense 1.6 μm fluorescence of Nd{sup 3+} doped cadmium bismuth silicate glasses

In this work, Judd-Ofelt analysis is applied to rare-earth (RE = Nd{sup 3+}) doped cadmium bismuth silicate (20CdO⋅xSiO{sub 2}⋅(79.5−x)Bi{sub 2}O{sub 3}⋅0.5Nd{sub 2}O{sub 3} (CSBN)) glasses in order to evaluate their potential as well as both glass laser systems and optical materials. The phenomenological Judd-Ofelt parameters (Ω{sub 2}, Ω{sub 4}, Ω{sub 6}) are determined for RE ions with their quality factors and compared with the equivalent parameters for several other hosts. The calculated value of stimulated emission cross-section for {sup 4}F{sub 3/2}→{sup 4}I{sub 11/2} has high and varies 14.72×10{sup −20} to 9.66×10{sup −20} cm{sup 2} with Bi{sub 2}O{sub 3} content in the host glass. The results point out that the glass system is good candidate for the development of photonics devices which are operating near infrared spectral range. Further, the FTIR results reveal that the glasses have BiO{sub 6}, SiO{sub 4} and non-bridging oxygen as local structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Order and disorder in calcium–silicate–hydrate

Despite advances in the characterization and modeling of cement hydrates, the atomic order in Calcium–Silicate–Hydrate (C–S–H), the binding phase of cement, remains an open question. Indeed, in contrast to the former crystalline model, recent molecular models suggest that the nanoscale structure of C–S–H is amorphous. To elucidate this issue, we analyzed the structure of a realistic simulated model of C–S–H, and compared the latter to crystalline tobermorite, a natural analogue of C–S–H, and to an artificial ideal glass. The results clearly indicate that C–S–H appears as amorphous, when averaged on all atoms. However, an analysis of the order around each atomic species reveals that its structure shows an intermediate degree of order, retaining some characteristics of the crystal while acquiring an overall glass-like disorder. Thanks to a detailed quantification of order and disorder, we show that, while C–S–H retains some signatures of a tobermorite-like layered structure, hydrated species are completely amorphous.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure effect on elastic anisotropy of crystals from ab initio simulations: The case of silicate garnets

A general methodology has been devised and implemented into the solid-state ab initio quantum-mechanical CRYSTAL program for studying the evolution under geophysical pressure of the elastic anisotropy of crystalline materials. This scheme, which fully exploits both translational and point symmetry of the crystal, is developed within the formal frame of one-electron Hamiltonians and atom-centered basis functions. Six silicate garnet end-members, among the most important rock-forming minerals of the Earth's mantle, are considered, whose elastic anisotropy is fully characterized under high hydrostatic compressions, up to 60 GPa. The pressure dependence of azimuthal anisotropy and shear-wave birefringence of seismic wave velocities for these minerals are accurately simulated and compared with available single-crystal measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shear strain mediated magneto-electric effects in composites of piezoelectric lanthanum gallium silicate or tantalate and ferromagnetic alloys

Shear strain mediated magneto-electric (ME) coupling is studied in composites of piezoelectric Y-cut lanthanum gallium silicate (LGS) or tantalate (LGT) and ferromagnetic Fe-Co-V alloys. It is shown that extensional strain does not result in ME effects in these layered composites. Under shear strain generated by an ac and dc bias magnetic fields along the length and width of the sample, respectively, strong ME coupling is measured at low-frequencies and at mechanical resonance. A model is discussed for the ME effects. These composites of Y-cut piezoelectrics and ferromagnetic alloys are of importance for shear strain based magnetic field sensors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical behavior of a composite interface: Calcium-silicate-hydrates

The generalized stacking fault (GSF) is a conceptual procedure historically used to assess shear behavior of defect-free crystalline structures through molecular dynamics or density functional theory simulations. We apply the GSF technique to the spatially and chemically complex quasi-layered structure of calcium-silicate-hydrates (C-S-H), the fundamental nanoscale binder within cementitious materials. A failure plane is enforced to calculate the shear traction-displacement response along a composite interface containing highly confined water molecules, hydroxyl groups, and calcium ions. GSF simulations are compared with affine (homogeneous) shear simulations, which allow strain to localize naturally in response to the local atomic environment. Comparison of strength and deformation behavior for the two loading methods shows the composite interface controls bulk shear deformation. Both models indicate the maximum shear strength of C-S-H exhibits a normal-stress dependency typical of cohesive-frictional materials. These findings suggest the applicability of GSF techniques to inhomogeneous structures and bonding environments, including other layered systems such as biological materials containing organic and inorganic interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Passivating boron silicate glasses for co-diffused high-efficiency n-type silicon solar cell application

Doping layers commonly have but one function: supplying the dopants to form a doped region within a substrate. This work presents B doping layers/stacks, which at the same time supply dopant atoms, passivate the B-doped crystalline Si surface sufficiently well (j{sub 0E} < 50 fA/cm{sup 2}), and show optical properties suitable for anti-reflective coating. Furthermore, these boron silicate glasses can act as a barrier against parasitic P in-diffusion during a co-diffusion step. The boron emitters diffused from the inductively coupled plasma plasma-enhanced chemical vapor-deposited B containing SiO{sub x} layers are investigated and optimized concerning passivation quality and contact properties for high-efficiency n-type solar Si cell designs. It is shown that even 10 nm thin SiO{sub x}:B films already allow for suitable emitter sheet resistance for screen-printed contacts. Furthermore, SiO{sub x}:B layers presented here allow for iV{sub OC} values of 675 mV and contact resistivity of 1 mΩcm{sup 2} for commercial Ag instead of Ag/Al pastes on the diffused boron emitter passivated with the SiO{sub x}:B layer supporting the contact formation. All of these properties can be achieved within one single B doping layer/stack.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bismuth-doped Mg - Al silicate glasses and fibres

This paper compares the optical properties of bulk bismuth-doped Mg - Al silicate glasses prepared in an iridium crucible to those of optical fibres prepared by the powder-in-tube method and having a core identical in composition to the glasses. The bulk glasses and fibres are shown to be similar in luminescence properties. The optical loss in the fibres in their IR luminescence band is about one order of magnitude lower than that in the crucible-melted glasses. The level of losses in the fibres and their luminescence properties suggest that such fibres can be made to lase near 1.15 {mu}m. (optical fibres, lasers and amplifiers. properties and applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supercontinuum generation and filamentation of ultrashort laser pulses in hybrid silicate nanocomposite materials on the basis of polysaccharides and hyperbranched polyglycidols

The possibility of using hybrid silicate nanocomposite materials on the basis of polysaccharides and hyperbranched polyglycidols for efficient conversion of pulsed radiation of a femtosecond Ti : sapphire laser at the wavelength 800 nm into supercontinuum in the range from 400 to 1000 nm is experimentally demonstrated. It is established that the addition of a small concentration of Au and CdS nanoparticles to the studied materials essentially affects the efficiency of conversion of the laser radiation energy into the supercontinuum spectrum. (extreme light fields and their applications)

36 MATERIALS SCIENCE↗

SPITZER DETECTION OF POLYCYCLIC AROMATIC HYDROCARBONS AND SILICATE FEATURES IN POST-AGB STARS AND YOUNG PLANETARY NEBULAE

We have observed a small sample of hot post-asymptotic giant branch (AGB) stars with the Infrared Array Camera (IRAC) and the Infrared Spectrograph (IRS) on board the Spitzer Space Telescope. The stars were selected from the literature on the basis of their far-infrared (IR) excess (i.e., post-AGB candidates) and B spectral type (i.e., close to the ionization of the envelope). The combination of our IRAC observations with Two Micron All Sky Survey and IRAS catalog data, along with previous radio observations in the cm range (where available) allowed us to model the spectral energy distributions of our targets and find that in almost all of them at least two shells of dust at different temperatures must be present, the hot dust component ranging up to 10{sup 3} K. In several targets, grains larger than 1 {mu}m are needed to match the far-IR data points. In particular, in IRAS 17423-1755 grains up to 100 {mu}m must be introduced to match the emission in the millimeter range. We obtained IRS spectra to identify the chemistry of the envelopes and found that more than one-third of the sources in our sample have mixed chemistry, showing both mid-IR bands attributed to polycyclic aromatic hydrocarbons (PAHs) and silicate features. The analysis of the PAH features indicates that these molecules are located in the outflows, far away from the central stars. We consider the larger than expected percentage of mixed-chemistry targets as a selection bias toward stars with a disk or torus around them. Our results strengthen the current picture of mixed chemistry being due to the spatial segregation of different dust populations in the envelopes.

79 ASTRONOMY AND ASTROPHYSICS↗

CHEMISTRY OF SILICATE ATMOSPHERES OF EVAPORATING SUPER-EARTHS

We model the formation of silicate atmospheres on hot volatile-free super-Earths. Our calculations assume that all volatile elements such as H, C, N, S, and Cl have been lost from the planet. We find that the atmospheres are composed primarily of Na, O{sub 2}, O, and SiO gas, in order of decreasing abundance. The atmospheric composition may be altered by fractional vaporization, cloud condensation, photoionization, and reaction with any residual volatile elements remaining in the atmosphere. Cloud condensation reduces the abundance of all elements in the atmosphere except Na and K. We speculate that large Na and K clouds such as those observed around Mercury and Io may surround hot super-Earths. These clouds would occult much larger fractions of the parent star than a closely bound atmosphere, and may be observable through currently available methods.

79 ASTRONOMY AND ASTROPHYSICS↗

A MODEL OF SILICATE GRAIN NUCLEATION AND GROWTH IN CIRCUMSTELLAR OUTFLOWS

Based on its abundance, high bond energy, and recent measurements of its vapor pressure SiO is a natural candidate for dust nucleation in circumstellar outflows around asymptotic giant branch stars. In this paper, we describe a model of the nucleation and growth of silicate dust in such outflows. The sensitivity of the model to varying choices of poorly constrained chemical parameters is explored, and the merits of using scaled rather than classical nucleation theory are briefly considered. An elaboration of the model that includes magnesium and iron as growth species is then presented and discussed. The composition of the bulk of the grains derived from the model is consistent with olivines and pyroxenes, but somewhat metal-rich grains and very small, nearly pure SiO grains are also produced.

36 MATERIALS SCIENCE↗

THE 2008 OUTBURST OF EX Lup-SILICATE CRYSTALS IN MOTION

EX Lup is the prototype of the EXor class of eruptive young stars. These objects show optical outbursts which are thought to be related to runaway accretion onto the star. In a previous study we observed in situ crystal formation in the disk of EX Lup during its latest outburst in 2008, making the object an ideal laboratory to investigate circumstellar crystal formation and transport. This outburst was monitored by a campaign of ground-based and Spitzer Space Telescope observations. Here we modeled the spectral energy distribution (SED) of EX Lup in the outburst from optical to millimeter wavelengths with a two-dimensional radiative transfer code. Our results showed that the shape of the SED at optical wavelengths was more consistent with a single-temperature blackbody than a temperature distribution. We also found that this single-temperature component emitted 80%-100% of the total accretion luminosity. We concluded that a thermal instability, the most widely accepted model of EXor outbursts, was likely not the triggering mechanism of the 2008 outburst of EX Lup. Our mid-infrared Spitzer spectra revealed that the strength of all crystalline bands between 8 and 30 {mu}m increased right after the end of the outburst. Six months later, however, the crystallinity in the 10 {mu}m silicate feature complex decreased. Our modeling of the mid-infrared spectral evolution of EX Lup showed that, although vertical mixing should be stronger during the outburst than in the quiescent phase, fast radial transport of crystals (e.g., by stellar/disk wind) was required to reproduce the observed mid-infrared spectra.

79 ASTRONOMY AND ASTROPHYSICS↗