Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADOW EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Nuclear design of Helical Cruciform Fuel rods

In order to increase the power density of current and new light water reactor designs, the Helical Cruciform Fuel (HCF) rods are proposed. The HCF rods are equivalent to a cylindrical rod, with the fuel in a cruciform shaped, twisted axially. The HCF rods increase the surface area to volume ratio and inter-subchannel mixing behavior due to their cruciform and helical shapes, respectively. In a previous study, the HCF rods have shown the potential to up-rate existing PWRs by 50% and BWRs by 25%. However, HCF rods do display different neutronics modeling and performance. The cruciform cross section of HCF rods creates radially asymmetric heat generation and temperature distribution. The nominal HCF rod's beginning of life reactivity is reduced, compared to a cylindrical rod with the same fuel volume, by 500 pcm, due to increase in absorption in cladding. The rotation of these rods accounts for reactivity changes, which depends on the H/HM ratio of the pin cell. The HCF geometry shows large sensitivities to U{sup 235} or gadolinium enrichments compared to a cylindrical geometry. In addition, the gadolinium-containing HCF rods show a stronger effect on neighboring HCF rods than in case of cylindrical rods, depending on the orientation of the HCF rods. The helical geometry of the rods introduces axial shadowing of about 600 pcm, not seen in typical cylindrical rods. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluation of models for numerical simulation of the non-neutral region of sheath plasma

Four different electron models are used to simulate the nonequilibrium plasma flow around a representative cylindrical Faraday probe geometry. Each model is implemented in a two-dimensional axisymmetric hybrid electron fluid and particle in cell method. The geometric shadowing model is derived from kinetic theory on the basis that physical obstruction of part of the velocity distribution leads to many of the expected sheath features. The Boltzmann electron fluid model relates the electron density to the plasma potential through the Boltzmann relation. The non-neutral detailed electron fluid model is derived from the electron conservation equations under the assumption of neutrality, and then modified to include non-neutral effects through the electrostatic Poisson equation. The Poisson-consistent detailed electron fluid model is also derived from the conservation equations and the electrostatic Poisson equation, but uses an alternative method that is inherently non-neutral from the outset. Simulations using the geometric shadowing and non-neutral detailed models do not yield satisfactory sheath structures, indicating that these models are not appropriate for sheath simulations. Simulations using the Boltzmann and Poisson-consistent models produce sheath structures that are in excellent agreement with the planar Bohm sheath solution near the centerline of the probe. The computational time requirement for the Poisson-consistent model is much higher than for the Boltzmann model and becomes prohibitive for larger domains.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cold Nuclear Matter Effects at PHENIX

While the study of the quark-gluon plasma has been the primary focus of the RHIC experiments, much work has also been done to understand so-called cold nuclear matter (CNM) eects through d+Au collisions where no hot plasma is produced. Eects such as nuclear shadowing, Cronin enhancement, and initial-state parton energy loss, among others, are not only interesting in their own right, but have direct implications on QGP-related measurements in A+A collisions. Recently PHENIX has measured CNM eects at midrapidity in s_NN = 200 GeV d+Au collisions. Measurements of reconstructed jets reveal the centrality dependence of both jet suppression and broadening of the away-side jet. Meanwhile, single electrons from heavy flavor decays exhibit enhancement, increasing with centrality, over a broad p_T range. J/psi and psi' modification have also been measured and are quite dierent in magnitude, in contrast with our expectations. The above results are presented here and compared to our present understanding of CNM effects.

PHENIX↗

The Effect of Temperature on the Preservation of Volatile-Rich Lunar Samples

Introduction. The Moon’s south pole is a high-priority target for human exploration and scientific study. This interest is, in part, due to the presence of Permanently Shadowed Regions (PSRs), which could contain high concentrations of unique volatiles at cryogenic temperatures [1]. Returned samples from PSRs may include a unique combination of rocks, regolith, and volatile species, providing unprecedented insights into the history of the Solar System and the potential for resource utilization on the Moon. However, because PSR samples are cryogenic up-on collection, lunar polar sample return will eventually require cold stowage for the journey from the Moon to Earth. Without cold stowage, PSR sample return will likely result in phase changes and chemical reactions within the volatile component of the sample, which would negatively impact the resulting scientific studies of those samples. This abstract summarizes the initial results from an ongoing characterization of analog PSR samples at a range of temperatures, with the goal of defining the temperatures needed for a flight cold stowage freezer. Background. Based on remote sensing observations of the Moon [2], south polar PSRs range in temperature from ~120K for small and/or shallow PSRs to ~20K at the most extreme locations in large, deep PSRs. A range of volatiles have been hypothesized to exist at the surface or subsurface of the lunar poles [3-5 and others]. This hypothesis was verified when the LCROSS mission impacted the <50-K PSR in the crater Cabeus, detecting a range of volatiles from water to low condensation temperature species such as H2S and methane [6]. Species such as H2S and ammonia (also detected by LCROSS) are also highly reactive, and increase the likelihood of chemical reactions at elevated (non-cryogenic) temperatures. At the Johnson Space Center’s Planetary Exploration and Astromaterials Research Laboratory (JSC-PEARL), we have developed a volatile-bearing lunar simulant that incorporates several of the species detected by LCROSS [Table 1] mixed cryogenically with the USGS Lunar Highlands Type (LHT) regolith simulant. The new volatile-regolith simulant will be used to assess the degree of sample alteration at room temperature, -20°C, -80°C, and -196°C (liquid nitro-gen), over a two-week period. Room temperature samples represent those likely to be returned during initial missions without cold stowage, -20°C provides an analog to Apollo cold curated samples, -80°C is the temperature of multiple flight payload freezers (e.g., MELFI), and -196°C is analogous to lunar PSRs. Two weeks is an approximation of the time between sample collection and Earth return for initial Artemis missions. Over this period of time, sample head-space gases will be analyzed using a Universal Gas Analyzer (UGA, a type of mass spectrometer) coupled with a Baratron pressure sensor. After testing, the regolith component of the simulant will be purged of volatiles and preserved for future electron beam and/or FTIR analysis. Experimental Procedure. Volatile-regolith simulants will be produced as an initial homogenous batch; this batch will then be distributed into aliquots (gas chromatography/GC vials or cryo vials), ensuring that each sample has the same starting composition and conditions [Fig. 1]. In addition to the “full” simulant shown in Table 1, less complex simulant compositions will be used as baseline and control samples [Table 2]. Aliquots will be produced in triplicate for each simulant composition, storage temperature, and date of sampling. Headspace gases in all Day 0 samples will be analyzed by the UGA immediately. Cold storage samples for future analytical days will be placed in freezers appropriate to their target temperatures (-20°C, -80°C, -196°C). For ambient-temperature samples, regolith and regolith-water samples will be stored in a fume hood, while the full simulant will be stored in a sealed Parr vessel for safety; no other simulants (RWCM/ RWCM+) will be stored at ambient temperature for this test. Samples will be analyzed by UGA in this manner on each Analysis Day outlined in Table 2. Analytical Data. The UGA measures the partial pressures in a single sample aliquot over a set mass range of 0-105 atomic mass units (AMU) [Figure 2]; this set range was selected to slightly exceed the mass of the highest-mass expected reaction product (H2SO4). The Baratron complements the UGA by measuring the total pressure in the headspace of a sample vial. Coupled together, the quantitative abundances of gases will be monitored throughout the test. UGA analyses of the triplicate samples for each storage temperature, day, and simulant composition will be averaged, and standard deviations for each will be calculated. The compositions of starting species (shown in Table 1) will be characterized as a function of time, and the presence of any new compounds (reaction products) will be monitored as well. Total pressures will be recorded for each sample analysis, and any samples that show signs of leakage (e.g., a significant reduction in pressure or simulant volatiles) will be discarded. Anticipated Results. Testing is planned to begin in January 2022. The resulting data will allow compositional and phase changes in the volatile component of the simulants to be determined. Both the reduction in initial compounds and the addition of reaction products are expected to be observed. In addition, the relative efficacy of the different temperatures at pre-serving the initial composition of the simulants will be quantified. Finally, the regolith component of each sample will be argon-purged and stored in a controlled environment for future laboratory analysis. Compositional and morphological changes in the regolith are expected for samples above 0°C. This test will be repeated three times over the course of 2022. Understanding the effect of temperature on both the volatile and regolith components of analog lunar materials will allow requirements for a cold stowage freezer to be developed. The implementation of cold stowage for lunar polar missions will maximize the preservation of returned samples, enabling ground-breaking lunar and Solar System volatiles science for decades to come.

J L Mitchell↗

Evidences for two scales in hadrons

Some unusual features observed in hadronic collisions at high energies can be understood assuming that gluons in hadrons are located within small spots occupying only about 10% of the hadrons' area. Such a conjecture about the presence of two scales in hadrons helps to explain the following: why diffractive gluon radiation is so suppressed; why the triple-Pomeron coupling shows no t dependence; why total hadronic cross sections rise so slowly with energy; why diffraction cones shrink so slowly, and why {alpha}{sub P}{sup '}<<{alpha}{sub R}{sup '}; why the transition from hard to soft regimes in the structure functions occurs at rather large Q{sup 2}; why the observed Cronin effect at collider energies is so weak; why hard reactions sensitive to primordial parton motion (direct photon, Drell-Yan dileptons, heavy flavors, back-to-back dihadrons, seagull effect, etc.) demand such a large transverse momenta of the projectile partons, which is not explained by next-to-leading order calculations; why the onset of nuclear shadowing for gluons is so delayed compared to quarks; and why shadowing is so weak.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reliability-guided digital image correlation for image deformation measurement

A universally applicable reliability-guided digital image correlation (DIC) method is proposed for reliable image deformation measurement. The zero-mean normalized cross correlation (ZNCC) coefficient is used to identify the reliability of the point computed. The correlation calculation begins with a seed point and is then guided by the ZNCC coefficient. That means the neighbors of the point with the highest ZNCC coefficient in a queue for computed points will be processed first. Thus the calculation path is always along the most reliable direction, and possible error propagation of the conventional DIC method can be avoided. The proposed novel DIC method is universally applicable to the images with shadows, discontinuous areas, and deformation discontinuity. Two image pairs were used to evaluate the performance of the proposed technique, and the successful results clearly demonstrate its robustness and effectiveness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The lateral surface drag coefficient of cylindrical spacecraft in a rarefied finite temperature atmosphere

In the present determination of the free molecule flow drag coefficient for a cylindrical spacecraft flying parallel to its principal axis, the lateral surface effects of thermal motion are explicitly included in terms of the average impact angle of the incident gas momentum vector. Kinetic theory is used to characterize self-shadowing, as well as to obtain an expression for the lateral surface coefficient in terms of the average impact angle of the incident momentum vector and the fractional momentum transfer along the line of impact. It is found that, for a length/diameter ratio of about 5, the lateral surface contribution to the drag coefficient is comparable to that of the front face.

Herrero, F. A.↗

Flight test of ARINC 741 configuration low gain SATCOM system on Boeing 747-400 aircraft

The Boeing company conducted a flight test of a SATCOM system similar to the ARINC 741 configuration on a production model 747-400. A flight plan was specifically designed to test the system over a wide variety of satellite elevations and aircraft attitudes as well as over land and sea. Interface bit errors, signal quality and aircraft position and navigational inputs were all recorded as a function of time. Special aircraft maneuvers were performed to demonstrate the potential for shadowing by aircraft structures. Both a compass rose test and the flight test indicated that shadowing from the tail is insignificant for the 747-400. However, satellite elevation angles below the aircraft horizon during banking maneuvers were shown to have a significant deleterious effect on SATCOM communications.

Murphy, Timothy A.↗

The Rate of Dielectric Breakdown Weathering of Lunar Regolith in Permanently Shadowed Regions

Large solar energetic particle events may cause dielectric breakdown in the upper 1 mm of regolith in permanently shadowed regions (PSRs). We estimate how the resulting breakdown weathering compares to meteoroid impact weathering. Although the SEP event rates measured by the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) on the Lunar Reconnaissance Orbiter (LRO) are too low for breakdown to have significantly affected the regolith over the duration of the LRO mission, regolith gardened by meteoroid impacts has been exposed to SEPs for approx.10(exp 6 yr. Therefore, we estimate that breakdown weathering's production rate of vapor and melt in the coldest PSRs is up to 1.8−3. 5 ×10(exp −7) kg/sq m/yr, which is comparable to that produced by meteoroid impacts. Thus, in PSRs, up to 10-25% of the regolith may have been melted or vaporized by dielectric breakdown. Breakdown weathering could also be consistent with observations of the increased porosity ("fairy castles") of PSR regolith. We also show that it is con- ceivable that breakdown-weathered material is present in Apollo soil samples. Consequently, breakdown weathering could be an important process within PSRs, and it warrants further investigation.

Meteoroid↗

CRICKET: Cryogenic Reservoir Inventory by Cost-Effective Kinetically Enhanced Technology

NASA PROGRAMMATIC CHALLENGE: Locate hidden water ice in the darkest, coldest places on the moon using dozens of simple, autonomous robots. CONCEPTUAL SOLUTION: Use multiple small, autonomous bots to search for hidden water ice in permanently shadowed regions of the surface of the moon. Bots will locate and tag hidden water ice for follow up missions.Technical Basis for proposed solution: use of emerging and maturing technologies - MEMS, Cubesats, Sensor nets, integrated devices – will minimize cost risk and maximize return. Benefits: Cricket will enable human exploration through in-situ resource utilization: Cricket will demonstrate a distributed constellation to achieve a key NASA goal of novel uses of commercially available technologies. Cricket will reignite public interest in lunar exploration through a sustained human, and robotic, presence on the moon. Technical Approach: The cricket constellation has three members: the "queen"; the "hive" and the "cricket" foragers. The queen transports the hive an its crickets to the moon. The hive lands on the surface and disperses the crickets (there may be more than one species of cricket). The crickets then use the hive as a communications and recharging hub. Each cricket hosts algorithms that allow it to explore its surroundings and monitor its power state - something like a lunar Roomba - and return for recharging. If they are lost due to power or surface condition problems, replacements can carry out the hive tasks. The two most successful types of bio-inspired algorithms (BIAs) are evolutionary algorithms and swarm-based algorithms which are inspired by the natural evolution and collective behavior in animals.The evolution of the idea is summarized in Table 1 and Figure 1. NIAC context: This system integrates key elements from other NIAC efforts; it uses them and extends them into a meaningful whole

Cryogenics↗

Leading twist nuclear shadowing, nuclear generalized parton distributions, and nuclear deeply virtual Compton scattering at small x

We generalize the leading twist theory of nuclear shadowing and calculate quark and gluon generalized parton distributions (GPDs) of spinless nuclei. We predict very large nuclear shadowing for nuclear GPDs. In the limit of the purely transverse momentum transfer, our nuclear GPDs become impact-parameter-dependent nuclear parton distribution functions (PDFs). Nuclear shadowing induces nontrivial correlations between the impact parameter b and the light-cone fraction x. We make predictions for the deeply virtual Compton scattering (DVCS) amplitude and the DVCS cross section on {sup 208}Pb at high energies. We calculate the cross section of the Bethe-Heitler (BH) process and address the issue of the extraction of the DVCS signal from the eA{yields}e{gamma}A cross section. We find that the eA{yields}e{gamma}A differential cross section is dominated by DVCS at the momentum transfer t near the minima of the nuclear form factor. We also find that nuclear shadowing leads to dramatic oscillations of the DVCS beam-spin asymmetry, A{sub LU}, as a function of t. The position of the points where A{sub LU} changes sign is directly related to the magnitude of nuclear shadowing.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A study of nuclear effect in F{sub 3} structure function in the deep inelastic v(v-bar) reactions in nuclei

We study nuclear effect in the F{sub 3}{sup A}(x) structure function in the deep inelastic neutrino reactions on iron by taking into account Fermi motion, binding, target mass correction, shadowing and anti-shadowing corrections. Calculations have been done in a local density approximation using relativistic nuclear spectral functions which include nucleon correlations for nuclear matter. Results for F{sub 3}{sup A}(x) have been compared with the results reported at NuTeV and also with some of the older experiments reported in the literature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pioneer 11 observations of trapped particle absorption by Amalthea

The discovery of a microsignatury of trapped radiation in the Amalthea orbit as detected by Pioneer 11 in a flyby of Juptier in 1974 is reported and its implications for the radial diffusion coefficient in Jupiter's inner magnetosphere are discussed. A low energy telescope registered the absorption of low-energy protons as a function of the magnetic L shell durig inbound and outbound trajectories. Drift velocities of the 1 MeV particles were calculated. No correspondingly heightened effects were observed from high-energy electrons or heavier nuclei. Further analysis of the 0.5-8.7 MeV protons showed data to be consistent erosion of the particle drift shadows by a diffusion process. A limit was calculated for the highest diffusion coefficient value for the 1 MeV protons at the Amalthea orbit. The results indicate that the diffusion is driven by fluctuating electric or magnetic fields.

Mckibben, R. B.↗

A new coherent demodulation technique for land-mobile satellite communications

An advanced coherent demodulation technique is described for land mobile satellite (LMS) communications. The proposed technique features a combined narrow/wind band dual open loop carrier phase estimator, which is effectively able to compensate the fast carrier phase fluctuation by fading with sacrificing a phase slip rate. Also included is the realization of quick carrier and clock reacquisition after shadowing by taking open loop structure. Its bit error rate (BER) performance is superior to that of existing detection schemes, showing a BER of 1 x 10(exp -2) at 6.3 dB E sub b/N sub o over the Rician channel with 10 dB C/M and 200 Hz (1/16 modulation rate) fading pitch f sub d for QPSK. The proposed scheme consists of a fast response carrier recovery and a quick bit timing recovery with an interpolation. An experimental terminal model was developed to evaluate its performance at fading conditions. The results are quite satisfactory, giving prospects for future LMS applications.

Yoshida, Shousei↗

Lunar and Planetary Science XXXV: Io, with a Dash of Titan

The session "Io, with a Dash of Titan" contained the following reports:A Deep Lava Channel on Io ; Volcanic Activity at Tvashtar Catena, Io; Characterization of Activity at Loki from Galileo and Ground-based Observations; Active and Passive Lava Resurfacing Processes on Io: A Comparative Study of Loki Patera and Prometheus; Loki Patera as the Surface of a Magma Sea; Lava Lakes on Io: New Perspectives from Modeling; Global Distribution of Active Volcanism on Io as Known at the End of the Galileo Mission Relationships Between Paterae, Mountains, and Hotspots on Io from a Global Database; Lithospheric Recycling on Io: The Role of Delamination; Building Mountains on Io: Implications for Io s Lithosphere ; The Effect of Large Melt Fraction on the Deformation Behavior of Peridotite: Implications for the Rheology of Io s Mantle; Matching Various Observations of Io with DSMC Modeling: Plume, Plume Shadow, Sodium Field Around Pele; and How Does Titan Retain a Finite Orbital Eccentricity?

Source record↗

Large and Small Droplet Impingement Data on Airfoils and Two Simulated Ice Shapes

Water droplet impingement data were obtained at the NASA Glenn Icing Research Tunnel (IRT) for four wings and one wing with two simulated ice shapes. The wings tested include three 36-in. chord wings (MS(1)-317, GLC-305, and a NACA 652-415) and a 57-in. chord Twin Otter horizontal tail section. The simulated ice shapes were 22.5- and 45-min glaze ice shapes for the Twin Otter horizontal tail section generated using the LEWICE 2.2 ice accretion program. The impingement experiments were performed with spray clouds having median volumetric diameters of 11, 21, 79, 137, and 168 mm. Comparisons to the experimental data were generated which showed good agreement for the clean wings and ice shapes at lower drop sizes. For larger drop sizes LEWICE 2.2 over predicted the collection efficiencies due to droplet splashing effects which were not modeled in the program. Also for the more complex glaze ice shapes interpolation errors resulted in the over prediction of collection efficiencies in cove and shadow regions of ice shapes.

Papadakis, Michael↗

Water Droplet Impingement on Simulated Glaze, Mixed, and Rime Ice Accretions

Water droplet impingement data were obtained at the NASA Glenn Icing Research Tunnel (IRT) for a 36-in. chord NACA 23012 airfoil with and without simulated ice using a dye-tracer method. The simulated ice shapes were defined with the NASA Glenn LEWICE 2.2 ice accretion program and including one rime, four mixed and five glaze ice shapes. The impingement experiments were performed with spray clouds having median volumetric diameters of 20, 52, 111, 154, and 236 micron. Comparisons to the experimental data were generated which showed good agreement for the rime and mixed shapes at lower drop sizes. For larger drops sizes LEWICE 2.2 over predicted the collection efficiencies due to droplet splashing effects which were not modeled in the program. Also for the more complex glaze ice shapes interpolation errors resulted in the over prediction of collection efficiencies in cove or shadow regions of ice shapes.

Papadakis, Michael↗

Discrete anisotropic radiative transfer modelling of solar-induced chlorophyll fluorescence: Structural impacts in geometrically explicit vegetation canopies

Solar-induced fluorescence (SIF) is a subtle but informative optical signal of vegetation photosynthesis. Remotely sensed SIF integrates environmental, physiological and structural changes that alter photosynthesis at leaf, plant and canopy scales. Radiative transfer models are ideally suited to investigate the complex sources of variability in the SIF signal to guide the interpretation of SIF retrievals from airborne and space-borne platforms. Here, we coupled the Fluspect-Cx model of leaf optical properties and chlorophyll-a fluorescence with the Discrete Anisotropic Radiative Transfer (DART) model to upscale SIF from individual leaves to three-dimensional (3D) structurally explicit canopies. For one-dimensional homogeneous (turbid-like) canopies, DART-SIF was nearly identical to SIF simulated in two existing models, SCOPE and mSCOPE (RMSE <0.221 W./sq.m.μm.sr). DART simulations in geometrically explicit 3D canopies offered four important insights regarding the influence of vegetation structure on the multi-angular top-of-canopy SIF signal. First, changes in the 3D canopy architecture of maize crops, represented by leaf density (leaf area index), and plant clumping (canopy closure) had a larger impact on SIF than the modelled photosynthetic efficiency distinction between sun-adapted and shade-adapted foliage. Second, clumping of leaves at the crop and stand levels was identified as one of the key driving factors of multi-angular anisotropy of red and far-red SIF (686 and 740 nm) for both maize and eucalyptus canopies. Third, non-photosynthetic woody material had a significant impact on top-of-canopy SIF in modelled 3D forest stands. Wood shadowing decreased the photosynthetically active radiation absorbed by green leaves, and consequently the SIF emissions, by 10% in sparse and 17% in dense eucalyptus stands. The wood obstruction (blocking) effect, quantified as a relative difference of SIF escape probabilities from canopies with and without wood in the nadir viewing direction, decreased far-red SIF by 4–6% but it had a smaller and sometimes positive influence (by less than 2%) on red SIF. Fourth, DART 3D radiative budget profiles revealed that the majority of the SIF signal from a dense eucalyptus stand originated from the top 25% of the simulated canopy. Interestingly, the introduction of bark-covered woody elements did not alter the simulated balance and omnidirectional escape factor of red SIF in this upper canopy part but did raise significantly both of them in case of far-red SIF. These results demonstrate the importance of 3D radiative transfer and radiative budget simulations for investigating SIF interactions in structurally complex plant canopies and for a better understanding of spatiotemporal and multi-angular remote sensing SIF observations.

Zbyněk Malenovský↗