Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Polarization Filtering of SAR Data

Theoretical analysis of polarization filtering of synthetic-aperture-radar (SAR) returns provide hybrid method applied to either (1) maximize signal-to-noise ratio of return from given target or (2) enhance contrast between targets of two different types (that have different polarization properties). Method valid for both point and extended targets and for both monostatic and bistatic radars as well as SAR. Polarization information in return signals provides more complete description of radar-scattering properties of targets and used to obtain additional information about targets for use in classifying them, discriminating between them, or enhancing features of radar images.

Dubois, Pascale C.↗

Improved Radiometric Correction For SAR Images

Correction algorithm reversible and applicable to both detected and complex images. Method described accounts for major effects of transmitter, antenna, receiver, and certain aspects of SAR signal processing upon calibration and provides for appropriate reversible corrections applied in processing. Applicable to both detected (amplitude-only) and complex (amplitude and phase) SAR image data and provides for optional subtraction of estimated noise floor from image.

Freeman, Anthony↗

Results of the 1988 NASA/JPL airborne SAR calibration campaign

During the spring of 1988, the NASA/JPL multifrequency, multipolarization SAR (synthetic aperture radar) flew in series of calibration experiments over the Goldstone dry lake bed. An array of calibration devices was deployed, including dihedral and trihedral corner reflectors, polarimetric active radar calibrators, passive receivers, and CW (continuous wave) tone generators. The aim of the campaign was to calibrate both amplitude and phase of the resulting SAR images, over long and short time scales. The results of the analysis of the calibration data collected in the spring of 1988 are presented. Trihedral corner reflector signatures and certain image background measures are used to externally calibrate relative amplitude and phase between polarizations at a given frequency, and to calibrate across frequencies. Assessments are made of the calibration accuracy as a function of image frame position for each frequency, and the stability of the radar calibration over long and short time-scales.

Freeman, A.↗

The discrimination of sea ice types using SAR backscatter statistics

X-band (HH) synthetic aperture radar (SAR) data of sea ice collected during the Marginal Ice Zone Experiment in March and April of 1987 was statistically analyzed with respect to discriminating open water, first-year ice, multiyear ice, and Odden. Odden are large expanses of nilas ice that rapidly form in the Greenland Sea and transform into pancake ice. A first-order statistical analysis indicated that mean versus variance can segment out open water and first-year ice, and skewness versus modified skewness can segment the Odden and multilayer categories. In additions to first-order statistics, a model has been generated for the distribution function of the SAR ice data. Segmentation of ice types was also attempted using textural measurements. In this case, the general co-occurency matrix was evaluated. The textural method did not generate better results than the first-order statistical approach.

Shuchman, Robert A.↗

Limex'87 ice surface characteristics and their effect upon C-band SAR sigantures

Ice surface characterization data were recorded during March 1987 in the Labrador Sea marginal ice zone, at the onset of spring melt. Measured data are used as input parameters in a simple scattering model to simulate the effects of temporal variations in material properties upon C-band scattering signatures. Snow moisture and surface roughness have a significant effect upon sigma(0)HH and large differences are predicted between undeformed floe surfaces and deformed or rubbled ice areas. The model reproduces a calibrated synthetic-aperture-radar (SAR)-derived signature obtained during the experiment with a reasonable degree of certainty. Predictions also simulate a trend observed in SAR images of increasing backscatter contrast between deformed and undeformed ice over period of surface warming.

Drinkwater, Mark R.↗

Recent advances in airborne terrestrial remote sensing with the NASA airborne visible/infrared imaging spectrometer (AVIRIS), airborne synthetic aperture radar (SAR), and thermal infrared multispectral scanner (TIMS)

Significant progress in terrestrial remote sensing from the air has been made with three NASA-developed sensors that collectively cover the solar-reflected, thermal infrared, and microwave regions of the electromagnetic spectrum. These sensors are the airborne visible/infrared imaging spectrometer (AVIRIS), the thermal infrared mapping spectrometer (TIMS) and the airborne synthetic aperture radar (SAR), respectively. AVIRIS and SAR underwent extensive in-flight engineering testing in 1987 and 1988 and are scheduled to become operational in 1989. TIMS has been in operation for several years. These sensors are described.

Vane, Gregg↗

SAR and passive microwave observations of the Odden during Mizex '87

The Odden, a protuberance of sea ice in the Greenland Sea Basin, was studied using the NIMBUS-7 scanning multichannel microwave radiometer (SMMR) satellite and an X-band (3 cm) synthetic aperture radar (SAR) aircraft. The sea ice, meteorological, and oceanographic conditions within the northern portion of the Odden were also studied in March and April 1987. The SMMR data, which were first validated with in situ ship measurements and the SAR data, showed rapid 2-4 day oscillations of the Odden ice edge. The oscillations at 74-75 deg N were several hundred kilometers in extent. The rapid oscillation of the Odden does not appear to be a result of wind-induced ice drift, but rather results from the rapid formation of thin ice off the main ice edge.

Sutherland, Laura L.↗

Squint mode SAR processing algorithms

The unique characteristics of a spaceborne SAR (synthetic aperture radar) operating in a squint mode include large range walk and large variation in the Doppler centroid as a function of range. A pointing control technique to reduce the Doppler drift and a new processing algorithm to accommodate large range walk are presented. Simulations of the new algorithm for squint angles up to 20 deg and look angles up to 44 deg for the Earth Observing System (Eos) L-band SAR configuration demonstrate that it is capable of maintaining the resolution broadening within 20 percent and the ISLR within a fraction of a decibel of the theoretical value.

Chang, C. Y.↗

Magellan SAR processing algorithm and H/W design

The SAR (synthetic-aperture radar) data-processing algorithm to be used for the Magellan mission is described. Radar system design, SAR data characteristics, and hardware (H/W) constraints, which are critical to the processing algorithm design, are highlighted. Data flow and the H/W architecture are given to show the real-time data processing capability. Simulation results obtained from processing the synthetic point-target echos are presented to demonstrate the performance of the processing algorithm.

Chen, M.↗

Calibration of quadpolarization SAR data using backscatter statistics

A new technique is described for calibration of complex multipolarization SAR imagery. Scatterer reciprocity and lack of correlation between like- and cross-polarized radar echoes for natural targets are used to remove cross-polarized contamination in the radar data channels without the use of known ground targets. If known targets are available, all data channels can be calibrated relative to one another and absolutely as well. The method is verified with airborne SAR data.

Klein, Jeffrey D.↗

The Danish SAR system - Design and initial tests

In January 1986, the design of a high-resolution airborne C-band SAR started at the Electromagnetics Institute of the Technical University of Denmark. The initial system test flights took place in November and December 1989. The authors describe the design of the system, its implementation, and its performance. They show how digital technology has been utilized to realize a very flexible radar with variable resolution, swath-width, and imaging geometry. The motion-compensation algorithms implemented to obtain the high resolution and the special features built into the system to ensure proper internal calibration are outlined. The data processing system, developed for image generation and quality assurance, is sketched, with special emphasis on the flexibility of the system. Sample images and a preliminary performance evaluation are presented, demonstrating that the design goals have been met. The ongoing system upgrades and the planned scientific utilization of the C-band SAR are described.

Madsen, Soren N.↗

More-Precise Calibration Of Polarimetric SAR

Algorithm for calibration of polarimetric synthetic-aperture-radar (SAR) data in Stokes-matrix representation more nearly exact. Present algorithm resembles prior algorithm closely, except requires extraction of one additional parameter from high-resolution raw SAR data in scattering-matrix format before compression and transformation to Stokes-matrix format and slight change in subalgorithm compressing those data.

Freeman, Anthony↗

Onboard System Processes SAR Data

Aircraft Flight Correlator (AFC) computing system, mounted with AIRSAR synthetic-aperture-radar (SAR) system, supplements recording and postflight analysis, processing portion of data in real or nearly real time to provide imagery for rapid evaluation. Facilitates diagnosis of SAR equipment or adjustment of parameters of experiment. Operates in two modes: "quick-look" mode, data processed in 10 minutes into high-resolution image; and "real-time" mode, data processed in real time to reduced resolution. Also used as aid to navigation.

Carande, Richard E.↗

Bacteriorhodopsin Film For Processing SAR Signals

"Instant" photographic film based on semisynthetic retinal pigment bacteriorhodopsin proposed for optical processing of synthetic-aperture-radar (SAR) signals. Input image recorded on film by laser operating at writing wavelength of bacteriorhodopsin, and output image recorded on computer by standard frame-grabber. Because it requires no chemical development, enables processing in nearly real time. Fast response and high resolution well suited for application. Film reusable, with concomitant reduction in cost of SAR processing.

Yu, Jeffrey W.↗

Statistical Approach To Extraction Of Texture In SAR

Improved statistical method of extraction of textural features in synthetic-aperture-radar (SAR) images takes account of effects of scheme used to sample raw SAR data, system noise, resolution of radar equipment, and speckle. Treatment of speckle incorporated into overall statistical treatment of speckle, system noise, and natural variations in texture. One computes speckle auto-correlation function from system transfer function that expresses effect of radar aperature and incorporates range and azimuth resolutions.

Rignot, Eric J.↗

Snow and glacier mapping with polarimetric SAR

The objective of this study was to examine the capability of mapping snow and glaciers in alpine regions using synthetic aperture radar (SAR) imagery when topographic information is not available. The topographic effects on the received power for a resolution cell can be explained by the change in illumination area and incidence angle in a slant-rante representation of SAR imagery. The specific polarization signatures and phase difference between HH and VV components are relatively independent of the illuminated are, and the incidence angle has only a small effect on these parameters. They provide a suitable measurement data set for snow and glacier mapping in a high-relief area. The results show that the C-band images of the enhancement factor, the phase difference between HH and VV scattering components, and the normalized cross product of VV scattering elements provide the capability to discriminate among snow with different wetnesses, glaciers, and rocky regions.

Shi, Jiancheng↗

Phi-s correlation and dynamic time warping - Two methods for tracking ice floes in SAR images

The authors present two algorithms for performing shape matching on ice floe boundaries in SAR (synthetic aperture radar) images. These algorithms quickly produce a set of ice motion and rotation vectors that can be used to guide a pixel value correlator. The algorithms match a shape descriptor known as the Phi-s curve. The first algorithm uses normalized correlation to match the Phi-s curves, while the second uses dynamic programming to compute an elastic match that better accommodates ice floe deformation. Some empirical data on the performance of the algorithms on Seasat SAR images are presented.

Mcconnell, Ross↗

Design, test, and applications of the Alaska SAR Facility

The key science requirements, the overall design, and the innovative testing approaches that have been used to ensure the functionality of the Alaska SAR Facility (ASF) are described. The facility is to play an important role in the remote sensing applications of Arctic oceanography, geology, glaciology, hydrology, and ecosystem processes. Attention is given to the ASF's three major components: the Receiving Ground Station, the SAR Processing System, and the Archive and Operations System. The ASF hardware configuration and software support, through extensive design and implementaton reviews, were shown to satisfy the initial memorandum of agreement first initiated by NASA for the establishment of a receiving ground station and image processing facility at the University of Alaska Fairbanks, and also to satisfy the science objectives formulated by the prelaunch Science Working team. The testing strategy and techniques used in the implementation of the ASF to assure functionality is outlined. The test structures, approach, and environment are considered.

Berwin, R. W.↗