Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resonator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Microwave dielectric measurements of lunar soil with a coaxial line resonator method

A method is given for sensitive dielectric measurements at a series of microwave frequencies using a section of coaxial line. The line is used as a 1-port cavity resonator; it resonates when the electrical length of the center conductor equals 1, 2 . . . , N half-wave lengths. The dielectric properties of an Apollo 17 dried soil sample were measured in vacuum over a temperature range of 173 to 373 K. The relative permittivity and the loss tangent were determined and the frequency dependence was very small. The derivative with respect to temperature, per degree, was 0.00045 for the permittivity and 0.00002 for the loss tangent.

Bussey, H. E.↗

Velocity measurements by laser resonance fluorescence

The photonburst correlation method was used to detect single atoms in a buffer gas. Real time flow velocity measurements with laser induced resonance fluorescence from single or multiple atoms was demonstrated and this method was investigated as a tool for wind tunnel flow measurement. Investigations show that single atoms and their real time diffusional motion on a buffer gas can be measured by resonance fluorescence. By averaging over many atoms, flow velocities up to 88 m/s were measured in a time of 0.5 sec. It is expected that higher flow speeds can be measured and that the measurement time can be reduced by a factor of 10 or more by careful experimental design. The method is clearly not ready for incorporation in high speed wind tunnels because it is not yet known whether the stray light level will be higher or lower, and it is not known what detection efficiency can be obtained in a wind tunnel situation.

She, C. Y.↗

The UV resonance lines of three hot Ap stars: HD 133029, HD 175362 and HD 219749

High resolution spectra of the Ap stars HD 133929, HD 175329 and HD 219749 were obtained during two 16 hour shifts with the IUE satellite at Goddard Space Flight Center. Stellar wind, extended atmosphere in rigid corotation with the stellar surface, and the influence of the strong magnetic field on the upper part of the atmosphere would explain the shape and the strength of the resonance lines. The resonance lines of HD 175362 in particular show very peculiar behavior. The necessary driving forces for the expanding envelope are not compatible with the diffusion theory of the Ap atmospheres.

Rakos, K. D.↗

Absorption and resonance Raman spectra of Pb2, Pb3, and Pb4 in xenon matrices

Matrix isolation techniques are used to investigate the spectra of lead molecules and, in particular, to obtain resonance Raman spectra of lead vapors isolated in solid xenon matrices. The presence of Pb2 is confirmed by the visible adsorption, and Raman spectra yield a vibrational frequency for the ground state of 108 per cm and a dissociation energy of 8200 per cm. A second resonance Raman progression indicates a Pb3 species of D3h symmetry. Finally, two additional Raman features at approximately 111 per cm spacing are evidence for a third species, tentatively identified as Pb4.

Stranz, D. D.↗

High-temperature measurements of Q-factor in rotated X-cut quartz resonators

The Q-factors of piezoelectric resonators fabricated from natural and synthetic quartz with a 34 deg rotated X-cut orientation were measured at temperatures up to 325 C. The synthetic material, which was purified by electrolysis, retains a higher enough Q to be suitable for high temperature pressure-transducer applications, whereas the natural quartz is excessively lossy above 200 C for this application. The results are compared to results obtained previously at AT-cut resonators.

Fritz, I. J.↗

Resonant Doppler velocimetry in supersonic nitrogen flow

The development of the Resonant Doppler Velocimeter (RDV) is discussed. It is a new nonintrusive laser technique for flow diagnosis. The RDV technique is applied to supersonic nitrogen flow with sodium atoms as tracer particles. The measurements are achieved by shining a tunable single frequency laser beam into the flow. The resonant absorption spectrum of the seeded species is determined by observing the fluorescence signal intensity as a function of excitation wavelength. By comparing the peak absorption wavelength with a reference frequency marker, the flow velocity along the excitation beam can be obtained through the Doppler shift relation. By fitting the spectrum with a theoretical line profile, the static temperature and pressure of the flow an be determined.

Cheng, S. W. S.↗

Solar nebula dispersal and the stability of the planetary system. I - Scanning secular resonance theory

Secular resonances in the early solar system are investigated with the aim of establishing constraints on the time scale and method of solar nebula dispersal. Simplified nebula models and dispersal routines are used to approximate changes in an assumed axisymmetric nebula potential. These changes drive an evolutionary sequence of Laplace-Lagrange solutions for the secular variations of the solar system. These sequences are characterized by a sweep of one or more giant planet resonances through the inner solar system. Their effect is rate-dependent; characteristic dispersal times of not greater than 10,000 to 100,000 years are required to avoid the generation of terrestrial eccentricities and inclinations in excess of observed values.

Ward, W. R.↗

An analysis of the OI 1304 A dayglow using a Monte Carlo resonant scattering model with partial frequency redistribution

The transport of resonance radiation under optically thick conditions is shown to be accurately described by a Monte Carlo model of the atomic oxygen 1304 A airglow triplet in which partial frequency redistribution, temperature gradients, pure absorption and multilevel scattering are accounted for. All features of the data can be explained by photoelectron impact excitation and the resonant scattering of sunlight, where the latter source dominates below 100 and above 500 km and is stronger at intermediate altitudes than previously thought. It is concluded that the OI 1304 A emission can be used in studies of excitation processes and atomic oxygen densities in planetary atmospheres.

Meier, R. R.↗

A 10-kW series resonant converter design, transistor characterization, and base-drive optimization

The development, components, and performance of a transistor-based 10 kW series resonant converter for use in resonant circuits in space applications is described. The transistors serve to switch on the converter current, which has a half-sinusoid waveform when the transistor is in saturation. The goal of the program was to handle an input-output voltage range of 230-270 Vdc, an output voltage range of 200-500 Vdc, and a current limit range of 0-20 A. Testing procedures for the D60T and D7ST transistors are outlined and base drive waveforms are presented. The total device dissipation was minimized and found to be independent of the regenerative feedback ratio at lower current levels. Dissipation was set at within 10% and rise times were found to be acceptable. The finished unit displayed a 91% efficiency at full power levels of 500 V and 20 A and 93.7% at 500 V and 10 A.

Robson, R. R.↗

'Coriolis resonance' within a rotating duct

An investigation of the unsteady disturbances of a fixed frequency within a radial duct rotating at a set speed is presented. The flow is assumed to be compressible, inviscid, and of a fluid which is a perfect gas. Equations are developed for the steady and the unsteady parts of the flow in cylindrical coordinates. The unsteady disturbances are expressed by Fourier decomposition in angular position, distance into the duct, and in time. It is found that a resonance is possible when the frequency of flow disturbances is twice the shaft-rotation frequency, considering only the radial and tangential disturbances and not the radial and circumferential disturbances. The particular point at which the resonance occurs indicates the occurrence is due to the Coriolis force, which is only present in the radial and tangential directions. It is noted that the Coriolis force can only be present in open-ended ducts, such as those found in centrifugal compressors.

Kurosaka, M.↗

Identification of 1980S27 and 1980S26 resonances in Saturn's A ring

The Voyager 2 ultraviolet spectrometer observation of a stellar occultation by Saturn's rings contains evidence for features associated with at least 31 resonances due to the F ring shepherd satellites 1980S27 and 1980S26. A limited analysis of density wave patterns associated with eight of these resonances yields surface mass densities for the A ring consistent with previous estimates.

Holberg, J. B.↗

AK-cut crystal resonators

Calculations have predicted the existence of crystallographically doubly rotated quartz orientations with turnover temperatures which are considerably less sensitive to angular misorientation then comparable AT- or BT-cuts. These crystals are arbitrarily designated as the AK-cut. Experimental data is given for seven orientations, phi-angle variations between 30-46 deg and theta-angle variations between 21-28 deg measured on 3.3-3.4 MHz fundamental mode resonators vibrating in the thickness shear c-mode. The experimental turnover temperatures of these resonators are between 80 C and 150 C, in general agreement with calculated values. The normalized frequency change as a function of temperature has been fitted with a cubic equation.

Kahan, A.↗

Density measurement in compressible flows using off-resonant laser-induced fluoresence

Measurement of molecular number density in compressible flows using laser-induced fluorescence is complicated by collisional quenching of the exicited state. It is shown that by exciting the fluorescence off-resonance the signal becomes proportional to number density and independent of collisional effects. Quantitative measurement of density in an underexpanded jet of nitrogen is demonstrated using off-resonant fluoresence from iodine seed molecules irradiated with the 514.5 nm line of the argon-ion laser.

Mcdaniel, J. C.↗

Ferromagnetic resonance intensity - A rapid method for determining lunar glass bead origin

Ferromagnetic resonance intensity, I(s), relies on the absence or presence of single-domain Fe formed during impact melting by autoreduction of Fe(2+) in the melt to distinguish volcanic from impact glass spherules in the lunar soil. SEM inspection of individual glass bead surfaces gave reliable evidence of the mode of glass genesis. Ferromagnetic resonance intensity was tested against the Apollo 15 and 17 volcanics. I(s) values of less than one were found in 94% of the volcanic glasses, implying the absence of single-domain Fe, while 75% of the impact glasses had elevated I(s) values. These samples lack single-domain Fe, and may represent impact melts of bedrock with little or no regolith contribution. Both the primary discrimination of volcanic and impact glasses, and the secondary one of bedrock-derived impact melts from impact melts partially or entirely derived from regolith, have been demonstrated for the I(s) technique.

Stone, C. D.↗

Experimental investigation of the scattering effects of a sphere in a cylindrical resonant chamber

Resonance frequency, acoustic pressure, and quality factor measurements for transverse and longitudinal modes of a cylindrical chamber are presented as a function of the position of a sphere along the chamber axis. The tests were performed over a wide range of sample-to-chamber ratios, and formulations were devised of the resonance frequency shift as a function of the components of the volume ratios. Departures from linearity were explored for intermediate ratios. The results are considered significant for acoustic levitation operations in space, where the acoustic radiation may alter the acoustic properties of the chamber.

Barmatz, M.↗

Further observations on resonance cones in non-Maxwellian plasmas

Results on the angular distribution of the electrostatic potential of a pulsating point charge in a warm magnetized plasma permeated by an electron beam are presented. The theoretical formulation for a finite magnetic field is given, and the solution of the resonance cone dispersion relation is presented. Numerical results on the angular distribution of the potential are shown, and the propagation of waves outside the resonance cones is described. It is demonstrated that with the inclusions of a finite magnetic field, the field patterns of a point charge are qualitatively similar to those obtained for a uniaxial plasma. The Cerenkov radiation occurs at angles much smaller than the cold-cone angle, even with the finite magnetic field. When the beam velocity is well above the thermal velocity of the background electrons, a characteristic wave propagation occurs between the cold-cone angles.

Thiemann, H.↗

Electron acceleration by Landau resonance with whistler mode wave packets

Recent observations of electrostatic waves associated with whistler mode chorus emissions provide evidence that electrons are being trapped by Landau resonance interactions with the chorus. In this paper, the trapping, acceleration and escape of electrons in Landau resonance with a whistler mode wave packet are discussed. It is shown that acceleration can occur by both inhomogeneous and dispersive effects. The maximum energy gained is controlled by the points where trapping and escape occur. Large energy changes are possible if the frequency of the wave packet or the magnetic field strength increase between the trapping and escape points. Various trapping and escape mechanisms are discussed.

Gurnett, D. A.↗

Laser Resonator

An optical resonator cavity configuration has a unitary mirror with oppositely directed convex and concave reflective surfaces disposed into one fold and concertedly reversing both ends of a beam propagating from a laser rod disposed between two total internal reflection prisms. The optical components are rigidly positioned with perpendicularly crossed virtual rooflines by a compact optical bed. The rooflines of the internal reflection prisms, are arranged perpendicularly to the axis of the laser beam and to the optical axes of the optical resonator components.

Harper, L. L.↗