Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Refractory material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Ion-induced grain growth and texturing in refractory thin films-A low temperature process

Selective grain growth can be promoted in thin films independently of the materials intrinsic properties, such as the melting temperature, by ion-irradiation. This enables the previously impossible evolution of large grain-sized microstructures with controlled crystallographic textures even in refractory metals, such as {alpha}-tantalum. Experimental results from materials with different crystal structure are compared on the basis of a theoretical model, which reveals the differences in ion-induced grain-growth dynamics.

36 MATERIALS SCIENCE↗

Isotopic heterogeneities in the solar system - Special report

The paper discusses the nature of isotopic anomalies in solar system material with emphasis on correlated anomalies in refractory elements. Evidence for the existence of short-lived radioactive nuclides in the early solar system is used to estimate the time scale for the last injection of freshly synthesized nuclear material. It is shown that the early solar nebula was incompletely mixed and contained debris which was injected from a stellar source at most a few million years prior to the formation of the solar system. The average solar system material consists of ambient interstellar material deficient in certain nuclear species to which a small fraction of freshly synthesized material was added. The isotopic variations reflect slightly different proportions of nuclei from different stellar sources which were locally well mixed and homogenized prior to or during the formation of the early solar nebula condensates.

Wasserburg, G. J.↗

Controlled optical properties via chemical composition tuning in molybdenum-incorporated β-Ga 2 O 3 nanocrystalline films

An approach is presented to design refractory-metal incorporated Ga2O3-based materials with controlled structural and optical properties. The molybdenum (Mo)-content in Ga2O3 was varied from 0 to 11 at% in the sputter-deposited Ga-Mo-O films. Molybdenum was found to significantly affect the structure and optical properties. While low Mo-content (≤4 at%) results in the formation of single-phase (β-Ga2O3), higher Mo-content results in amorphization. Chemically-induced band gap variability (Eg~1 eV) coupled with structure-modification indicates the electronic-structure changes in Ga-Mo-O. The linear relationship between chemical-composition and optical properties suggests that tailoring the optical-quality and performance of Ga-Mo-O films is possible by tuning the Mo-content.

Environmental Molecular Sciences Laboratory↗

Evaluation of a low-density polyimide foam in a dynamic, high temperature environment

A low density polyimide foam material was tested in an arc tunnel to determine its potential for heat shield application on aerospace vehicles. The results show that the material has some reuse potential at surface temperatures as high as 750 K. When a black refractory paint was applied to the surface of the material, the surface recession was negligible at 750 K. An analytical thermal conductivity was derived for this material which, combined with measured thermal property values, can be used to make preliminary design thickness calculations for heat shield applications.

Pittman, C. M.↗

PROTECT: Production and Reuse of Thermally Efficient Ceramic Thermal Protection Systems

PROTECT (Production and Reuse Of Thermally Efficient Ceramic TPS) is a NASA Early Career Initiative focused on developing the next generation of reusable ceramic thermal protection systems (TPS). This project addresses key challenges in TPS design, including temperature capability, thermal stability, and refurbishment time, by integrating novel material development with predictive modeling. Leveraging enhanced capabilities in NASA’s Porous Microstructure Analysis (PuMA) software, PROTECT introduces new modeling tools to predict the thermal and mechanical behavior of fibrous ceramic materials. These tools enable accurate prediction of performance metrics such as thermal conductivity and structural integrity, reducing reliance on costly physical testing. Preliminary advances in these areas will be presented. To support model validation, PROTECT is building a comprehensive database of raw material properties using advanced characterization techniques, including micro computed tomography (CT) scanning in collaboration with the University of Illinois Urbana-Champaign (UIUC). The presentation will detail the sampling workflows and analysis methods used to generate this detailed microstructural data and how it is used to develop improved models in PuMA. This multi-center collaboration, spanning NASA (JSC, ARC, KSC, GRC), Oak Ridge National Laboratory, UIUC, and SpaceX, is developing tailored TPS solutions for LEO, lunar, and Martian missions. By bridging heritage systems with the demands of modern spaceflight, PROTECT contributes to the advancement of reusable TPS technologies for future exploration missions.

Propulsion, Refractory, and Coating Materials↗

Radiation Modified Ion-Implanted Materials

The objective of this project, by BNL and PVI, is to develop radiation-modified materials like titanium, nickel, aluminum, steel, refractory metals and alloys by implanting them with ions. Ion implantation radically improves strength & friction resistance. The focus will be on components of products like jet engines & windmills. Example: implanting windmill parts subject to friction may greatly reduce operating costs. Currently, electric power from wind is a factor of 1.5 more costly than coal due to labor costs [frequent lubrication of parts involves stopping a windmill & opening its nacelle (enclosures)]. A 50% friction reduction through ion implantation of parts will reduce the need for lubricants and make wind-generated electricity cheaper than fossil fuel. Major PVI role is adapting laboratory experimental results into commercially viable industrial processes and marketing them.

36 MATERIALS SCIENCE↗

PROTECT: Production and Reuse of Thermally Efficient Ceramic Thermal Protection Systems

PROTECT (Production and Reuse Of Thermally Efficient Ceramic TPS) is a NASA Early Career Initiative focused on developing the next generation of reusable ceramic thermal protection systems (TPS). This project addresses key challenges in TPS design, including temperature capability, thermal stability, and refurbishment time, by integrating novel material development with predictive modeling. Leveraging enhanced capabilities in NASA’s Porous Microstructure Analysis (PuMA) software, PROTECT introduces new modeling tools to predict the thermal and mechanical behavior of fibrous ceramic materials. These tools enable accurate prediction of performance metrics such as thermal conductivity and structural integrity, reducing reliance on costly physical testing. Preliminary advances in these areas will be presented. To support model validation, PROTECT is building a comprehensive database of raw material properties using advanced characterization techniques, including micro computed tomography (CT) scanning in collaboration with the University of Illinois Urbana-Champaign (UIUC). The presentation will detail the sampling workflows and analysis methods used to generate this detailed microstructural data and how it is used to develop improved models in PuMA. This multi-center collaboration, spanning NASA (JSC, ARC, KSC, GRC), Oak Ridge National Laboratory, UIUC, and SpaceX, is developing tailored TPS solutions for LEO, lunar, and Martian missions. By bridging heritage systems with the demands of modern spaceflight, PROTECT contributes to the advancement of reusable TPS technologies for future exploration missions.

Propulsion, Refractory, and Coating Materials↗

Theory-guided Design of Refractory MPEAs for High-Temperature, Harsh-Service Conditions

Focusing on novel materials for harsh-service environments (oxidation, corrosion, and load), durability, higher operational temperature, and direct impact on power-generation technology, the goal was, using a quantitative theory-guided design approach integrated with high-throughput synthesis and characterization for validation, to accelerate by 50% the development of high temperature, refractory-based multi-principal element alloys (MPEAs) materials platforms (with co-designed oxidation-resistant, self-healing coatings) that demonstrate phase-stable operation with desired properties at 10-20% higher temperatures in oxidizing environments over state-ofthe- art systems (like Ni-stainless steels, i.e., Haynes 282 – used in critical gas turbine applications, and refractory TZM, i.e., molybdenum-rich Mo99.4-Ti0.5-Zr0.08-C0.02 in wt%). Notably, refractory MPEAs may achieve higher operational temperatures with superior creep strength and offer 50-100% larger thermal conductivity (140-170 W/m-K) than Ni-based systems, potentially eliminating active cooling, reducing system weight, complexity, and cost. Achieving this goal addresses DOE material challenges in energy generation and efficiency (higher-temperature operation), reduced lifecycle energy (waste-heat recovery), and accelerating materials development in support of AMO’s Strategic Plan and QTR goals. DOE’s Advanced Manufacturing Office (AMO) goal of reducing industrial energy intensity and GHG emissions is addressed by development of coated refractory MPEAs exhibiting 20%+ higher operational temperature (direct increase of Carnot efficiency), higher melting temperatures (better phase stability), superior creep strength (better lifetime with creep rate lower by factor of 10), larger (50-100%) thermal conductivity (improved cooling without active cooling), reduced complexity (single-phase alloys), self-healing coating (reliable oxidation-resistance) and cost.

36 MATERIALS SCIENCE↗

Control of the Plasma-Material Interface for Long Pulse Optimization in EAST and KSTAR

This project's major goal was to understand and control the plasma-material interface to improve long pulse discharge and performance in the EAST and KSTAR devices, emphasizing the unique strengths of each machine. In particular, MIT has developed implanted depth markers to diagnose the net erosion of high-Z materials. The goals included the characterization and utilization of these markers in various high-Z materials of interest, including TZM, tungsten, and refractory metal base high entropy alloys.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compositional Modifications to Alter and Suppress Laves Phases in Al x CrMoTa y Ti Alloys

The development of refractory complex concentrated alloys in the Al–Cr–Mo–Ta–Ti alloy system is reported. Alloys with modified Al and Ta concentrations are designed using CALPHAD tools and produced via arc melting and characterized in both as-cast and annealed forms. Properties of the alloys, nature of the microstructures, and phase transformation behavior are described via X-ray diffraction, microstructural characterization, microhardness, and differential scanning calorimetry. Two alloys, namely, Al 0.25 CrMoTa 0.8 Ti and Al 0.75 CrMoTa 0.8 Ti, are represented by a body-centered-cubic matrix phase after annealing, along with a secondary Cr–Ta Laves phase of the C15 and C14 polytypes, respectively. In as-cast and annealed forms, the Al 0.75 CrMoTa 0.45 Ti alloy comprises a single-bcc phase. Microhardness of the Laves phase containing alloys demonstrates susceptibility to cracking, whereas the Al 0.75 CrMoTa 0.45 Ti alloy displays high specific hardness, signs of ductility as evidenced by slip traces near indentations, and minimal scatter of hardness values.

36 MATERIALS SCIENCE↗

The condensation and fractionation of refractory lithophile elements

It is noted that Cr, Mg, and Si are fractionated in chondritic material along with, but to a lesser extent than, a large group of more refractory elements. These patterns are reexamined with the reasoning that this might imply some unique distribution at the time of fractionation. It is shown that apparently two distinct fractionization patterns can be resolved: one involving ordinary and enstatite chondrites and the other involving carbonaceous chondrites, the earth, the moon, and the eucrite parent body. It is noted that the two trends intersect at C1 composition. Attention is given to the range in which the largest fraction of planetary matter condenses. It is concluded that the appearance of large amounts of condensed materials is conceivably in some way related to the fractionization process, although the exact relationship cannot be specified.

Larimer, J. W.↗

Erosion of high-Z refractory coatings for helicon plasma source window

Proto-MPEX (Materials Plasma Exposure eXperiment), a linear plasma device (LPD), using a high power radio frequency (RF) (⩾100 kW, 13.56 MHz) helicon plasma source, has suffered RF sheath-induced window erosion. The sputtered impurities from the window surface transport toward the downstream target affecting plasma-material interaction studies. The rectified sheath voltage formed was high enough to cause window erosion by light ions due to its low-Z components (e.g. Si 3 N 4 and AlN). Hence, we are proposing impurity mitigation strategies, which involve the application of a Faraday screen to lower the rectified sheath voltage and the application of high-Z refractory coatings on the existing window plasma-facing surface. In this work, we report the erosion of two different coatings, i.e., tantalum oxide (Ta 2 O 5 ) and hafnium oxide (HfO 2 ) on a silicon nitride (Si 3 N 4 ) window material under conditions of low-energy deuterium (D) ion impact, well below the Ta 2 O 5 sputtering energy threshold (i.e. 250 eV). The test samples were RF-biased and exposed to a high D-ion fluence (∼10 26 m −2 ) in Plasma Interaction with Surface Component Experimental Station (PISCES-A) LPD. The experimentally measured sputtering yields of the high-Z refractory coatings below the sputtering energy threshold of Ta 2 O 5 indicate an increased erosion due to the plasma impurities, especially due to oxygen. Improving the vacuum level could reduce the oxygen impurities and increase the lifespan of the coated helicon window for plasma operation. Post-surface analysis indicates no preferential erosion of oxygen or enrichment of the high-Z surface component. This is likely due to an effective energy transfer from the impurity ion for sputtering of the high-Z component in the coating. With the reduced rectified sheath voltage at the window surface and improved vacuum conditions, the proposed high-Z refractory coatings offer a promising solution for reducing window erosion in future MPEX plasma operations at ORNL.

RF bias↗

Arc Jet Results on Candidate High Temperature Coatings for NASA's NGLT Refractory Composite Leading Edge Task

In 2000, arc jet testing was conducted on thirteen material systems for possible use on the nose leading edge of the Hyper-X program s X-43A Mach 10 vehicle. Six material systems survived 3, 130- second cycles. To support NASA s Next Generation Launch Technology Programs (NGLT) need for passive refractory composite leading edges with multiple reuse capability at temperatures up to 3600 F, these six materials were subjected to an expanded arc jet test program. This expanded arc jet test program included three phases. The purpose of the first phase was to generate emissivity data as a function of temperature. The purpose of the second phase was to determine if the material systems had any thermal cycling durability, and the third phase was to determine whether the materials could survive an arc jet test of one hour duration. Some of the coating systems were found to have very low emissivities, suggesting that they would not be good candidates for leading edges coating. Other coating systems survived both the second and third phases of the test program and showed potential for use as an oxidation protection coating for leading edges. This presentation summarizes the test program results.

Ohlhorst, C. W.↗

Quantification of Local Tumor Response to Fractionated Radiation Therapy for Non-Hodgkin Lymphoma Using Weekly {sup 18}F-FDG PET/CT Imaging

Purpose: To quantify, in a feasibility study, metabolic and volumetric response to fractionated radiation therapy (RT) using weekly {sup 18}F fluoro-deoxyglucose positron emission tomography (PET) imaging for 10 non-Hodgkin lymphoma (NHL) patients, and to correlate them to clinical outcome. Methods and Materials: Ten patients with chemotherapy-refractory NHL planned for radical RT were prospectively entered into a research study. PET/computed tomography (CT) scans were acquired before RT, and repeated weekly during the 3- to 4-week course of RT, and at 1 and 3 months after therapy. Gross tumor volumes were contoured on CT scans and the corresponding maximum standardized uptake values (SUV{sub max}) determined in the coregistered PET images. The clinical outcomes of interest were local tumor response at 3 months post-RT and local tumor status at last follow-up or time of death. Results: {sup 18}F fluoro-deoxyglucose uptake from inflammation was rarely observed. The responses showed a large variability between patients. SUV{sub max} decreased consistently with a median of -2.1% per Gy (range, -3.3 to -0.7) and the median of the volumetric response was -2.2% per Gy (range, -2.8 to +0.5). Initial SUV{sub max} was not correlated with local control, whereas smaller initial tumor volume was, with smaller tumors more likely to achieve local control. The responses after treatment were also correlated to local control, but not the responses during treatment. Conclusions: Radiation does not confound the FDG uptake in the NHL tumor and normal tissues. Only smaller initial tumor volume and metabolic and volumetric response after completion of radiation therapy significantly correlated with eventual local control.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis of anatase nanoparticles with extremely wide solid solution range and ScTiNbO{sub 6} with alpha-PbO{sub 2} structure

Anatase-type nanoparticles Sc{sub X}Ti{sub 1-2X}Nb{sub X}O{sub 2} with wide solid solution range (X=0-0.35) were hydrothermally formed at 180 deg. C for 5 h. The lattice parameters a{sub 0} and c{sub 0}, and the optical band gap of anatase gradually and linearly increased with the increase of the content of niobium and scandium from X=0 to 0.35. Their photocatalytic activity and adsorptivity by the measurement of the concentration of methylene blue (MB) that remained in the solution in the dark or under UV-light irradiation were evaluated. The anatase phase existed stably up to 900 deg. C for the samples with X=0.25-0.30 and 750 deg. C for that with X=0.35 during heat treatment in air. The phase with alpha-PbO{sub 2} structure and the rutile phases coexisted in the samples with X=0.25-0.30 after heated at temperatures above 900-950 deg. C. The alpha-PbO{sub 2} structure having composition ScTiNbO{sub 6} with possibly some cation order similar to that seen in wolframite existed as almost completely single phase after heat treatment at temperatures 900-1500 deg. C through phase transformation from anatase-type ScTiNbO{sub 6}. - Graphical abstract: Anatase-type Sc{sub X}Ti{sub 1-2X}Nb{sub X}O{sub 2} solid solutions with wide solid solution range (X=0-0.35) were hydrothermally formed as nanoparticles from the precursor solutions of Sc(NO{sub 3}){sub 3}, TiOSO{sub 4}, NbCl{sub 5} at 180 deg. C for 5 h using the hydrolysis of urea. Anatase-type ScTiNbO{sub 6} was synthesized under hydrothermal condition. ScTiNbO{sub 6} having alpha-PbO{sub 2} structure with possibly some cation order similar to that seen in wolframite was formed through phase transformation above 900 deg. C.

36 MATERIALS SCIENCE↗

Cr{sub x}Re{sub 1-x}O{sub 2} oxides with different rutile-like structures: changes in the electronic configuration and resulting physical properties

Mixed chromium-rhenium oxides, Cr{sub x}Re{sub 1-x}O{sub 2} with 0.31<=x<=0.66, have been synthesized for the first time by high-pressure high-temperature synthesis and in evacuated quartz tubes. The crystal structures of the compounds have been determined by single crystal and powder X-ray diffraction. Depending on synthesis conditions (pressure and temperature) these phases crystallize either in a tetragonal structure (P4{sub 2}/mnm) with statistical distribution of metal ions on one site (rutile-type), with cation ordering along c-axis (trirutile-type), or in a monoclinic rutile-like structure (C2/m) with ordering of Cr- and Re-cations and metallic Re-Re bonds. The 'a' parameter of the tetragonal unit cell increases with increasing Re content whereas the 'c' parameter decreases, indicating a strengthening of the Re-Re bond. The thermal stability of tetragonal Cr{sub x}Re{sub 1-x}O{sub 2} in Ar-atmosphere depends on the Re-content, decomposition is observed at 1241 K for x=0.34, but already at 966 K for x=0.5. The thermal expansion of Cr{sub x}Re{sub 1-x}O{sub 2} is anisotropic with a larger expansion coefficient in the 'c' direction. Tetragonal Cr{sub x}Re{sub 1-x}O{sub 2} with 0.31<=x<0.54 order antiferromagnetically at low temperatures with T{sub N} depending on the Cr-content x. - Graphical abstract: Antiferromagnetic rhenium oxides Cr{sub x}Re{sub 1-x}O{sub 2} with metallic type of conductivity crystallize in different rutile-like polymorphs depending on synthesis conditions. Single crystals of the tetragonal modification can be obtained by high-pressure high-temperature synthesis.

36 MATERIALS SCIENCE↗

Structural characterization and electrical properties of NiNb{sub 2-x}Ta{sub x}O{sub 6} (0<=x<=2) and some Ti-substituted derivatives

A structural and electrical characterization of the system NiNb{sub 2-x}Ta{sub x}O{sub 6} (0<=x<=2) is presented. For x<=0.25 materials with the columbite-type structure typical of NiNb{sub 2}O{sub 6} have been obtained whereas for x>=1 tri-rutile-like oxides were obtained. The electrical properties are similar in both cases; they are semiconducting with very low electrical conductivity and very high activation energy, though slight differences were found as a function of Ta content. Improvement of conductivity by reducing the stoichiometric materials could not be achieved due to decomposition. In this connection, partial substitution of Nb or Ta by Ti has been carried out in order to create oxygen vacancies. Tantalum was partially replaced by Ti to a significant extent in the tri-rutile structure inducing a slight increasing of conductivity. However, for the columbite case neither Nb nor Ta could be partially replaced. This behavior is quite different from that reported for other similar columbites such as MnNb{sub 2}O{sub 6-{delta}}, which exhibits high electrical conductivity upon substitution of niobium by titanium. - Graphical abstract: NiNb{sub 2-x}Ta{sub x}O{sub 6} exhibits the columbite structure for low tantalum contents whereas high contents of tantalum stabilize a trirutile-like structure. Electrical conductivity decreases as tantalum content increases in both columbite and tri-rutile.

36 MATERIALS SCIENCE↗

Dielectric properties of some MM'O{sub 4} and MTiM'O{sub 6} (M=Cr, Fe, Ga; M'=Nb, Ta, Sb) rutile-type oxides

We describe an investigation of the structure and dielectric properties of MM'O{sub 4} and MTiM'O{sub 6} rutile-type oxides for M=Cr, Fe, Ga and M'=Nb, Ta and Sb. All the oxides adopt a disordered rutile structure (P4{sub 2}/mnm) at ambient temperature. A partial ordered trirutile-type structure is confirmed for FeTaO{sub 4} from the low temperature (17 K) neutron diffraction studies. While both the MM'O{sub 4} oxides (CrTaO{sub 4} and FeTaO{sub 4}) investigated show a normal dielectric property MTiM'O{sub 6} oxides for M=Fe, Cr and M'=Nb/Ta/Sb display a distinct relaxor/relaxor-like response. Significantly the corresponding gallium analogs, GaTiNbO{sub 6} and GaTiTaO{sub 6}, do not show a relaxor response at T<500 K. - Graphical abstract: Dielectric response of FeTiNbO{sub 6}.

36 MATERIALS SCIENCE↗