Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

On the evolution of slowly accreting neutron stars

In the light of recent calculations of pycnonuclear reaction rates for light elements, we consider the problem of slow interstellar accretion onto old, possibly magnetized neutron stars. We argue that accretion will occur at the Hoyle-Lyttleton rate after the star has spun down in less than about 10 exp 9 yr. A deep ocean of liquid hydrogen and helium, extending down to depths about 100 m, will cover the surface of the star once it has accreted about 10 exp 25 g of gas. Beneath the ocean will be a layer of almost pure solid O-16 which undergoes two-stage electron capture to C-16 above a pressure 2.7 x 10 exp 28 dyne/sq cm, corresponding to an accreted mass of about 10 exp 27 g. Taking into account the presence of multiple layers of distinct chemical composition, we conclude that the crust will be stable to small perturbations under the conditions envisaged for instellar accretion. A thick layer of up to 10 exp 27 g of metastable C-16 will then accumulate. We discuss the implications of these results to old Galactic neutron stars as sources of gamma-ray bursts.

Blaes, O. M.↗

Helioseismological test of a new model for stellar convection

We compare the predictions of two solar models with the observed p-mode eigenfrequencies. The two models use the same input microphysics (nuclear reaction rates, opacity, and equation of a state) and the same numerical evolutionary code, but differ in the treatment of turbulent convection. The first model employs the standard mixing-length theory of convection (MLT), while the second model employs a new model of turbulent convection (CM) whose primary goal was that of accounting for the whole spectrum of turbulent eddies so as to avoid the MLT approximation that such a wide spectrum be represented by a single, large eddy. The main result of this paper is that the p-mode eigenfrequencies calculated with the CM model show an overall improvement with respect to those calculated with the standard MLT model.

Paterno, L.↗

Isomerization reaction dynamics and equilibrium at the liquid-vapor interface of water. A molecular-dynamics study

The gauche-trans isomerization reaction of 1,2-dichloroethane at the liquid-vapor interface of water is studied using molecular-dynamics computer simulations. The solvent bulk and surface effects on the torsional potential of mean force and on barrier recrossing dynamics are computed. The isomerization reaction involves a large change in the electric dipole moment, and as a result the trans/gauche ratio is considerably affected by the transition from the bulk solvent to the surface. Reactive flux correlation function calculations of the reaction rate reveal that deviation from the transition-state theory due to barrier recrossing is greater at the surface than in the bulk water. This suggests that the system exhibits non-Rice-Ramsperger-Kassel-Marcus behavior due to the weak solvent-solute coupling at the water liquid-vapor interface.

Benjamin, Ilan↗

Two and three-dimensional prediffuser combustor studies with air-water mixture

Two- and three-dimensional gas turbine prediffuser-combustor sectors were experimentally studied under a number of mixture and flow conditions in a tunnel operating with a two-phase, air-liquid film-droplet mixture. It is concluded that water vaporization in the combustor causes changes in both local gas temperature and state of vitiation and reduces reaction rates. Substantial accumulation of water and water vapor takes place in pocket over the combustor volume, even when the air-water mixture is steady in time. The accuracy of determining combustor performance changes increases with a better knowledge of the state of the air-water mixture in the primary zone. To establish flame-out conditions it is considered to be necessary to combine the prediction of detailed flowfield and chemical activity with that of flame stability and motion characteristics.

Laing, Peter↗

An overview of the evaluation of oxygen interaction with materials-third phase (EOIM-III) experiment - Space Shuttle Mission 46

An overview of EOIM-III, designed to produce benchmark atomic oxygen reactivity data is presented. Ambient density measurements are conducted using a quadrupole mass spectrometer calibrated for atomic oxygen measurements in a unique ground-based test facility. The combination of these data with the predictions of ambient density models permits an assessment of the accuracy of measured reaction rates on a variety of materials, many of which have never been tested in LEO previously.

Leger, Lubert J.↗

Atmospheric distribution and sources of nonmethane hydrocarbons

The paper discusses the atmospheric distribution of natural and man-made nonmethane hydrocarbons (NMHCs), the major species of airborne NMHCs, and their sources and sinks. Particular attention is given to the techniques for measuring atmospheric NMHCs; diurnal and seasonal variations of atmospheric NMHCs and differences between rural, urban, and marine environments; latitudinal and vertical distributions; and available stratospheric NMHC measurements. A formula defining the atmospheric lifetime of a NMHC from its reaction rates with OH and O3 is presented.

Singh, Hanwant B.↗

Chloryl nitrate - A novel product of the OClO + NO3 + M recombination

The products of the reaction of OClO with NO3 were investigated between 220 and 298 K using a flow reactor and infrared, visible, and ultraviolet analysis. At temperatures below 250 K new infrared and ultraviolet absorption features were observed and assigned to the novel compound chloryl nitrate (O2ClONO2). Additionally, ClO and NO2 were observed as reaction products, indicating the existence of a second reaction channel. O2ClONO2 formation predominates at temperatures below 230 K. The reaction rate constant at 220 K is estimated to be on the order of 10 exp -14 cu cm/molecule s in 1-5 Torr of helium. These observations suggest that O2ClONO2 may exist in the terrestrial stratosphere.

Friedl, Randall R.↗

A modified sulfate process to lunar oxygen

A modified sulfate process which produces oxygen from iron oxide-bearing minerals in lunar soil is under development. Reaction rates of ilmenite in varying strength sulfuric acid have been determined. Quantitative conversion of ilmenite to ferrous sulfate was observed over a range of temperatures and concentrations. Data has also been developed on the calcination of by-product sulfates. System engineering for overall operability and simplicity has begun, suggesting that a process separating the digestion and sulfate dissolution steps may offer an optimum process.

Sullivan, Thomas A.↗

Application of program LAURA to thermochemical nonequilibrium flow through a nozzle

Program LAURA (Langley Aerothermodynamic Upwind Relaxation Algorithm) is an upwind-biased, point-implicit relaxation algorithm for obtaining the numerical solution to the governing equations for 3D viscous hypersonic flows in chemical and thermal nonequilibrium. The algorithm is derived using a finite-volume formulation in which the inviscid components of flux across cell walls are described with a modified Roe's averaging and with second-order corrections based on Yee's Symmetric Total Variation Diminishing scheme. The code has been applied to Problem 8.2 of this workshop for the case of thermochemical nonequilibrium flow through a nozzle. Chemical reaction rates are defined with the model of Park (1987). Thermal nonequilibrium is modeled using a two-temperature approximation in which the vibrational energies of all molecules are assumed to be in equilibrium at a single temperature which is generally different from the translational-rotational temperature. Two grids were used to define the flow for the original problem, with a stagnation temperature of 6500 K. A third case with a stagnation temperature of 10,000 K is also presented. The solution domain includes the converging nozzle, subsonic flow domain in which the gas is substantially in thermochemical equilibrium and the diverging nozzle, hypersonic flow domain in which the gas is substantially in thermochemical nonequilibrium.

Gnoffo, Peter A.↗

TiC growth in C fiber/Ti alloy composites during liquid infiltration

A cylindrical model is developed for predicting the reaction zone thickness of carbon fiber-reinforced Ti-matrix composites, and good agreement is obtained between its predicted values and experimental results. The reaction-rate constant for TiC formation is estimated to be 1.5 x 10 exp -9 sq cm/sec. The model is extended to evaluate the relationship between C-coating thicknesses on SiC fibers and processing times.

Warrier, S. G.↗

In situ measurements constraining the role of sulphate aerosols in mid-latitude ozone depletion

In situ measurements of stratospheric sulphate aerosol, reactive nitrogen and chlorine concentrations at middle latitudes confirm the importance of aerosol surface reactions that convert active nitrogen to a less active, reservoir form. This makes mid-latitude stratospheric ozone less vulnerable to active nitrogen and more vulnerable to chlorine species. The effect of aerosol reactions on active nitrogen depends on gas phase reaction rates, so that increases in aerosol concentration following volcanic eruptions will have only a limited effect on ozone depletion at these latitudes.

Fahey, D. W.↗

Test of a new theory for stellar convection using helioseismology

Two evolutionary models of the sun have been tested using helioseismological data. The two models use the same input microphysics (nuclear reaction rates, opacity, equation of state) and the same numerical evolutionary code, but differ in the treatment of turbulent convection. The first model employs the standard mixing - length theory of convection, while the second one employs a new turbulent convection model which overcomes some basic inconsistencies of the standard theory of convection. The test rests on the calculation of p-mode eigenfrequencies and on the comparison with the helioseismological data. The comparison shows an overall improvement of the eigenfrequencies calculated with the new model with respect to those calculated with the standard model, although it appears that both models still suffer from inaccuracies especially in the treatment of the surface layers.

Paterno, L.↗

Research activity at the shock tube facility at NASA Ames

The general design and operating conditions of NASA Ames's electric arc drive shock tube facility are described, and the measurements conducted at the facility to support the development of a theoretical model of the effects of chemical nonequilibrium over a hypersonic vehicle are summarized. In particular, attention is given to the results of measurements at a shock velocity of 6.20 km/s in 1 Torr nitrogen and measurements at a shock velocity of 10.2 km/s in 0.1 Torr air. The discussion covers reaction rate measurement, the use of holographic interferometry, and measurements of vibrational populations using Raman scattering.

Sharma, Surendra P.↗

Morphology of nitric acid and water ice films

Ice films have been used to simulate stratospheric cloud surfaces in order to obtain laboratory data on solubilities and heterogeneous reaction rates. In the present study, environmental scanning electron microscopy (ESEM) is used to study thin films of both water ice and nitric acid ice near the composition of the trihydrate. The ices are formed by vapor deposition onto aluminum or borosilicate-glass substrates cooled to about 200 K. Micrographs are recorded during the deposition process and during subsequent annealing at higher temperatures. The results show that the ice films are composed of loosely consolidated granules, which range from about 1 to 20 microns in size at temperatures between 197 and 235 K. Cubic water ice is sometimes observed at 200 K, which converts to the hexagonal form at slightly higher temperatures. The loose packing of the granules confirms the high porosities of these films obtained from separate bulk porosity measurements. Average surface areas calculated from the observed granule sizes range from about 0.2 to 1 sq m/g and agree with surface areas obtained by gas-adsorption (BET) analysis of annealed ice films. For unannealed films, the BET areas are about an order of magnitude higher than the ESEM results, implying that the unannealed ices contain microporosity which is lost during the annealing process.

Keyser, Leon F.↗

Theoretical studies of the marine sulfur cycle

Several reduced sulfur compounds are produced by marine organisms and then enter the atmosphere, where they are oxidized and ultimately returned to the ocean or the land. The oceanic dimethyl sulfide (DMS) flux, in particular, represents a significant fraction of the annual global sulfur input to the atmosphere. In the atmosphere, this gas is converted to sulfur dioxide (SO2), methane sulfonic acid, and other organic acids which are relatively stable and about which little is known. SO2 is a short lived gas which, in turn, is converted to sulfuric acid and other sulfate compounds which contribute significantly to acid rain. Because of the complexity of the sulfur system, it is not well understood even in the unperturbed atmosphere. However, a number of new observations and experiments have led to a significant increase in the understanding of this system. A number of one dimensional model experiments were conducted on the gas phase part of the marine sulfur cycle. The results indicate the measured concentration of DMS and the amplitude of its diurnal cycle are in agreement with estimates of its global flux. It was also found that DMS can make a large contribution to the background SO2 concentration in the free troposphere. Estimates of CS2 concentrations in the atmosphere are inconsistent with estimated fluxes; however, measured reaction rates are consistent with the observed steep tropospheric gradient in CS2. Observations of CS2 are extremely sparse. Further study is planned.

Toon, Owen B.↗

The evolution equation for the flame surface density in turbulent premixed combustion

The mean reaction rate in flamelet models for turbulent premixed combustion depends on two basic quantities: a mean chemical rate, called the flamelet speed, and the flame surface density. Our previous work had been primarily focused on the problem of the structure and topology of turbulent premixed flames, and it was then determined that the flamelet speed, when space-averaged, is only weakly sensitive to the turbulent flow field. Consequently, the flame surface density is the key quantity that conveys most of the effects of the turbulence on the rate of energy release. In flamelet models, this quantity is obtained via a modeled transport equation called the Sigma-equation. Past theoretical work has produced a rigorous approach that leads to an exact but unclosed formulation for the turbulent Sigma-equation. In the exact Sigma-equation, it appears that the dynamical properties of the flame surface density are determined by a single parameter, namely the turbulent flame stretch. Unfortunately, the turbulent flame stretch as well as the flame surface density is not available from experiments, and, in the absence of experimental data, little is known on the validity of the closure assumptions used in current flamelet models. Direct Numerical Simulation (DNS) is the alternative approach to get basic information on these fundamental quantities. In the present work, three-dimensional DNS of premixed flames in isotropic turbulent flow is used to estimate the different terms appearing in the Sigma-equation. A new methodology is proposed to provide the source and sink terms for the flame surface density, resolved both temporally and spatially throughout the turbulent flame brush. Using this methodology, our objective is to extract the turbulent flame stretch from the DNS data base and then perform extensive comparisons with flamelet models. Thanks to the detailed information produced by the DNS-based analysis, it is expected that this type of comparison will not only underscore the shortcomings of current models, but also suggest ways to improve them.

Trouve, Arnaud↗

Partial analysis of LDEF experiment A-0114

During the contract period, work concentrated on four main components. Data from the UAH silver pin hole camera was analyzed for determination of the mean Long Duration Exposure Facility (LDEF) satellite attitude and stability in orbit, to include pitch and yaw. Chemical testing performed on the AO-114 hot plate determined the form and locus of absorption of cosmogenic beryllium-7. Reaction rates of atomic oxygen with Kapton and other polymeric solids integrated over the whole LDEF orbital lifetime were analyzed. These rates were compared with the JSC estimated values for Space Station exposures. Metal and polymer films exposed on A0114 (C-9 and C-3 plates) were also analyzed.

Gregory, John C.↗

Performance assessment of low pressure nuclear thermal propulsion

A low pressure nuclear thermal propulsion (LPNTP) system, which takes advantage of hydrogen dissociation/recombination, was proposed as a means of increasing engine specific impulse (Isp). The effect of hydrogen dissociation/recombination on LPNTP Isp is examined. A two-dimensional computer model was used to show that the optimum chamber pressure is approximately 100 psia (at a chamber temperature of 3,000 K), with an Isp approximately 15 s higher than at 1,000 psia. At high chamber temperatures and low chamber pressures, the increase in Isp is due to both lower average molecular weights caused by dissociation and added kinetic energy from monatomic hydrogen recombination. Monatomic hydrogen recombination increases the Isp more then hydrogen dissociation. Variations in the mole fraction of monatomic hydrogen are similar to variations in static pressure along the axial nozzle position. Most recombination occurs close to the nozzle throat. Practical variations in nozzle geometry have minimal impact on recombination. Other models which can simulate a wider range of nozzle designs should be used in the future. The uncertainty of the hydrogen kinetic reaction rates at high temperatures (approximately 3,000 K) affects the accuracy of the analysis and should be verified with simple bench tests.

Gerrish, H. P., Jr.↗