Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ReN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An in-situ study of low thermal expansion and internal stress evolution in FeMn alloys

The mechanism of low thermal expansion phenomenon in antiferromagnetic FeMn alloys needs to be revealed. In this work, the evolution of lattice thermal expansion and internal stress in FeMn alloys was investigated by in-situ synchrotron X-ray diffraction during thermal cycling. Preceding the martensitic transformation, the coefficient of lattice thermal expansion (CLTE) decreased and the full width at half maximum (FWHM) of the diffraction peaks broadened abnormally. The evolution of the lattice thermal expansion and the FWHM were both reversible and isotropic. The additional reflection spots around the fundamental diffraction spots in the electron diffraction patterns of austenite and the dispersed nano-scale martensite embryos in austenite observed in the dark field TEM images proves the existence of premartensitic transformation. Finally, similar phenomena were found in FeMn Invar alloy, which indicate that the Invar effect is closely related to the internal stress evolution caused by premartensitic transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The impact of nickel concentration and stacking fault energy on deformation mechanisms in high-purity austenitic Fe-Cr-Ni alloys

Understanding how composition affects deformation mechanisms in austenitic stainless steels is essential for developing accurate predictive models of stress-induced failures and stress corrosion cracking. Nickel (Ni), an element classified as a critical element, plays a crucial role in these processes. It is important to examine how Ni concentration influences stacking fault energy (SFE) and, consequently, the deformation mechanisms of austenitic stainless steels. However, in commercial stainless steels, the effects of other alloying elements and impurities can obscure Ni's role, complicating efforts to isolate its impact. Here, in this study, we use two high-purity Fe-Cr-Ni alloys to investigate how Ni concentration and SFE interact to alter deformation mechanisms and induce martensitic transformation. By combining in situ synchrotron X-ray diffraction (XRD) tensile testing and post-mortem electron microscopy with density functional theory simulations, we gain precise insights into these phenomena. We find that the Fe18Cr10Ni (wt%) alloy, with its low SFE, exhibits higher stacking fault probability, deformation-induced martensitic transformation, and a lesser increase in dislocation density with plastic strain. In contrast, the Fe18Cr14Ni (wt%) alloy, with its higher SFE, shows enhanced deformation twinning and greater dislocation density with increasing strain. These findings from high-purity ternary alloys provide valuable insights that can guide the search for alternative elements to replace Ni while achieving similar effects on phase stability and deformation behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic recrystallization of a wrought magnesium alloy: Grain size and texture maps and their application for mechanical behavior predictions

Effect of dynamic recrystallization (DRX) on the grain refinement and texture modification was studied by conducting a series of hot compression on AZ31B Mg alloy. Processing-grain size-texture maps were established as a function of temperature, strain rate, strain, and the Zener-Hollomon parameter (Z). Moreover, influence of simultaneous changes in the grain size and texture on tensile yield strength and ductility of the hot-worked Mg alloy was studied using the grain size and texture maps established. The processing-grain size map showed that the DRX grain size decreased with the increase in Z, also revealing various characteristics ranging from a grain growth, grain refinement, to a bimodal distribution of ultrafine grains and partially recrystallized grains. The effect of twinning on the grain refinement was also evident at high Z conditions. The processing-texture map revealed that the initial fiber texture was altered significantly to a shear, off-normal, or extension-twin texture with the increase in Z. The Schmid-factor maps were calculated to identify a dominant deformation mode during a subsequent tensile deformation of the hot-worked samples. Finally, a corresponding Hall-Petch relationship for each dominant deformation mode was used to establish tensile yield-strength maps, which agree well with the measured data.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition

In the present study, in situ high-energy X-ray diffraction (HEXRD), dilatometry, and metallography were conducted for the purpose of understanding microstructure evolution during intercritical annealing of a Fe-0.19C-4.39Mn steel from a martensitic initial condition. Three different simulations for austenite growth and solute partitioning during isothermal holding were conducted using the DICTRA™ module of Thermo-Calc®. The microstructures after intercritical annealing exhibit film-like retained austenite; however, in situ HEXRD indicates that retained austenite in the initial martensitic microstructure had decomposed upon heating to the isothermal holding temperature, suggesting that film-like austenite may be generated during intercritical annealing via nucleation and growth of new austenite and without necessarily preserving initial retained austenite films in the martensitic microstructure. Metallography and in situ HEXRD also indicate that cementite had formed upon heating but did not readily dissolve during an 1800 s isothermal hold although considerable growth of austenite had occurred during the isothermal hold, suggesting that austenite nucleation and initial growth during intercritical annealing does not solely occur due to carbon partitioning. A simulation incorporating cementite suggests that the increase in austenite fraction during intercritical annealing initially occurs in association with Mn partitioning followed by austenite growth induced by gradual cementite dissolution.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High-throughput investigation of structural evolution upon solid-state in Cu–Cr–Co combinatorial multilayer thin-film

Cu-Cr-Co combinatorial multilayer thin-films were prepared by a high-throughput ion beam sputtering system. Based on the thickness ratio among the individual nanoscale monolayers (Cu, Cr, Co), the resulting stoichiometry covered the entire phase diagram. The chemical composition and structure of Cu-Cr-Co combinatorial chip upon solid-state reaction were studied by lab-based micro-X-ray fluorescence (mu-XRF) and high-throughput synchrotron X-ray diffraction (XRD), respectively. A composition-structure map for Cu-Cr-Co combinatorial chip was developed through automated data analysis employing hierarchical clustering techniques. The structural evolution of Cu-Cr-Co combinatorial chip as a function of heat-treatment temperature, time, and modulation period were studied systematically. Furthermore, the effect of the elemental distribution in-depth direction was investigated to gain more insights regarding phase transformation. This work provides an efficient method and new perspectives for the design and optimization of the composition and structure of high-performance thin-films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of laser scanning speed on the microstructure, phase transformation and mechanical property of NiTi alloys fabricated by $\mathrm{LPBF}$

This study investigated the effects of laser scanning speed on the microstructure, phase transformation and properties of NiTi alloys fabricated by laser powder bed fusion (LPBF). In this study, the contributions of metallurgical factors under different scanning speeds, such as Ni evaporation, Ni4Ti3 precipitation, dislocations and internal stress, to the transformation temperature and transformation latent heat were clarified through specially designed experiments. Ni evaporation is found to have the most profound effect, followed by precipitation. Increasing scanning speed is found to reduce Ni loss, thus cause less increase in the transformation temperature and transformation heat of the LPBF-NiTi alloys. Increasing scanning speed also increases the microstructure non-uniformity and thus widens the transformation temperature interval. The orientations of residual stress exhibit strong crystallographic stiffness dependence. The LPBF-NiTi alloys with different scanning speeds all exhibited high strains (>13.4%) and excellent shape memory effect. A LPBF-NiTi honeycomb structure exhibited 96% shape recovery rate after a 60% pre-compressive deformation. Besides, there is an optimum scanning speed for minimum porosity and smallest average pore size. However, the pore structure is found to have weak influence on the tensile behaviour of the LPBF-NiTi alloys, possibly due to the high defect tolerance of the martensitic transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multiscale characterization of an additively manufactured property graded Ni-base alloy for molten-salts\supercritical-CO 2 heat exchangers

The sequential optimization of strength and corrosion resistance in conventional alloy design procedures often results in a tradeoff between environmental degradation and optimal mechanical properties. A concurrent optimization of these two material properties is essential to efficiently develop high temperature alloys that can withstand harsh environments increasingly required for carbon–neutral energy technologies. In this work, we demonstrate the feasibility of directed energy deposition (DED) to manufacture a dual-corrosion resistant Ni-based alloy (Hastelloy N and Haynes 282), that meets the high temperature operation requirements of a molten-salts\supercritical-CO 2 (sCO 2 ) heat exchanger. A combination of multiscale characterization techniques and computational thermodynamics was employed to evaluate the cracking susceptibilities during fabrication and predict the microstructural stability of the material. Very good agreement was achieved between the observed and predicted phases and phase fractions of the as-printed material. A careful characterization of the transition zone between the two terminal alloy chemistries revealed potential precipitation strengthening (γ') on the Hastelloy N side while columnar-shaped M 23 C 6 and γ' precipitates that formed at grain boundaries (GBs) of the transition zone likely minimized the local interfacial energies. Both these mechanisms are believed to increase the interfacial stability but their performance at high temperatures requires further investigation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of synchrotron X-ray induced oxidation of Ag–Cu thin-film

Combinatorial Ag-Cu thin-films were irradiated by synchrotron X-ray in air to investigate the beam damage on the surface of the thin-film. The main effect was found to be oxidation with the oxidation state primarily depending on film composition: CuO formed on the pure Cu film, whereas Cu 2 O formed in the presence of Ag. Meanwhile, formation of crystalline Ag 2 O 2 was favored and preferentially in the Ag-rich area. Lastly, these results are of great importance in studying the oxidation of noble metal nano-film, and in the characterization of nano-films using synchrotron X-ray.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ion redistributions at interfaces facilitate nucleation and growth of branched Ag 3 PO 4 polypods

Branched structures are of spectacular interest due to their improved light-harvesting, direct carrier transportation pathway, high surface area, and controllable electronic structures. Understanding their growth mechanisms and controlling factors enables the design of materials with improved functions. Interfaces of liquid-solid and air-liquid are known to change the chemical and physical properties of the liquid solution. However, their role in crystal growth, especially of branched structures, is seldom investigated. In this work we synthesized branched silver phosphate polypods in a thin layer of aqueous solution at room temperature taking advantage of the unique properties near the interfaces. The branched crystals nucleate and grow with a liquid thickness of 810 µm or below requiring the presence of both the gas-liquid and liquid-solid interfaces. The hydrophilicity of the solid substrate also facilitates nucleation and growth. Our results indicate that the synergism of long-range electric fields (ion distributions) at the interfaces promotes not only the nucleation and growth of silver phosphate but also the formation of branched structures. This work can be a reference for facilitating crystal nucleation and growth and controlling structures with specific morphologies, such as branched ones, by understanding and mimicking the properties at the interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Shape memory effect in metallic glasses

Shape memory effect (SME), mainly present in crystalline Ti-Ni alloys, is basically missing in metallic glasses (MGs) that lack the long-range periodic order of crystals. In this work, we report experimental results of SME in annealed MGs, in which the low-energy configuration state recovery is observed by both differential scanning calorimetry and X-ray photon correlation spectroscopy. We elucidate the origin of SME in MGs under the potential energy landscape framework, i.e., after annealing, the energy of MGs enters into a deep basin and atoms are located in the low-energy configuration state. Albeit deviating from their relative stable configurations by temperature changes, atoms in the annealed MGs tend to return to the low-energy atomic configurations along certain trajectories as pre-annealing temperature is approached, These results could extend the application of MGs as functional materials by directionally manipulating their energy states via annealing and rejuvenation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Persistent hot carrier diffusion in boron arsenide single crystals imaged by ultrafast electron microscopy

Cubic boron arsenide (BAs) is promising for microelectronics thermal management because of its high thermal conductivity. Recently, its potential as an optoelectronic material is also being explored. However, it remains challenging to measure its photocarrier transport properties because of small sizes of available high-quality crystals. Here, we use scanning ultrafast electron microscopy (SUEM) to directly visualize the diffusion of photocarriers in BAs single crystals. Surprisingly, we observed ambipolar diffusion at low optical fluence with persistent hot carrier dynamics for above 200 ps, which can likely be attributed to the large frequency gap between acoustic and optical phonons, the same feature that is responsible for the high thermal conductivity. At higher optical fluence, we observed spontaneous electron-hole separation. Our results show BAs is an attractive optoelectronic material combining high thermal conductivity and excellent photocarrier transport properties. Finally, our study also demonstrates the capability of SUEM to probe photocarrier transport in emerging materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Amino-tethering synthesis strategy toward highly accessible sub-3-nm L1 0 -PtM catalysts for high-power fuel cells

Because of the poor accessibility of embedded active sites, platinum (Pt)-based electrocatalysts suffer from insufficient Pt utilization and mass transport in membrane electrode assemblies (MEAs), limiting their performance in polymer electrolyte membrane fuel cells. Here, we report a simple and universal approach to depositing sub-3-nm L1 0 -PtM nanoparticles over external surfaces of carbon supports through pore-tailored amino (NH 2 )-modification, which enables not only excellent activity for the oxygen reduction reaction, but also enhanced Pt utilization and mass transport in MEAs. Using a low loading of 0.10 mg Pt ∙cm -2 , the MEA of PtCo/KB-NH 2 delivered an excellent mass activity of 0.691 A∙mgPt -1 , a record-high power density of 0.96 W∙cm -2 at 0.67 V, and only a 30-mV drop at 0.80 A∙cm -2 after 30,000 voltage cycles, which meets nearly all targets set by the Department of Energy. Finally, this work provides an efficient strategy for designing advanced Pt-based electrocatalysts and realizing high-power fuel cells.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Physical origins of the varying performance and unusual transport behaviors among thermoelectric A Mg 2 Sb 2 materials ( A = Ca, Sr, Sm, Yb, and Mg)

Contrary to the similar thermoelectric performance among both AZn 2 Sb 2 and AMg 2 Bi 2 compounds, their isostructural counterparts, AMg 2 Sb 2 , can exhibit thermoelectric figure of merit values that vary by orders of magnitude with different A elements. Here, we reveal physical origins accounting for the significantly differing performance among AMg 2 Sb 2 -based compounds (A = Ca, Sr, Sm, Yb, and Mg) through comprehensive analyses, where it is shown that the dispar- ities in performance at the macroscale essentially originate from the widely varying activation energies that equal amounts of dopant can induce. Meanwhile, a few unusual transport behaviors regarding electrical conductivity, carrier concentration, or lattice thermal con- ductivity among these compounds have been identified, and we also present their rationales in depth. Furthermore, this mechanism-focused study can not only promote further understanding of the complex transport behaviors in condensed matter but be instrumental in rationally tun- ing the physical properties of materials as well.

36 MATERIALS SCIENCE↗