Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR OPERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Sensitivity analysis for best-estimate thermal models of vertical dry cask storage systems

Loading requirements for dry cask storage of spent nuclear fuel are driven primarily by decay heat capacity limitations, which themselves are determined through recommended limits on peak cladding temperature within the cask. This study examines the relative sensitivity of peak material temperatures within the cask to parameters that influence both the stored fuel residual decay heat as well as heat removal mechanisms. Here, these parameters include the detailed reactor operating history parameters (e.g., soluble boron concentrations and the presence of burnable poisons) as well as factors that influence heat removal, including non-dominant processes (such as conduction from the fuel basket to the canister and radiation within the canister) and ambient environmental conditions. By examining the factors that drive heat removal from the cask alongside well-understood factors that drive decay heat, it is therefore possible to make a contextual analysis of the most important parameters to evaluation of peak material temperatures within the cask.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Pilot microbial electrolysis cell closes the hydrogen loop for hydrothermal wet waste conversion to jet fuel

The global shift toward net-zero emissions necessitates resource recovery from wet waste. In this study, we demonstrate the first feasibility of combining pilot-scale microbial electrolytic cells (MECs) with hydrothermal liquefaction (HTL) for simultaneous post-hydrothermal liquefaction wastewater (PHW) treatment and efficient hydrogen (H₂) production to meet biocrude upgrading requirements. Long-term single reactor operation revealed that fixed anode potential enabled rapid startup, and low catholyte pH and high salinity were effective in suppression of cathodic methanogenesis and acetogenesis – resulting in high current density of 16.6 A m –2 and 9.3 A m –2 when feeding synthetic wastewater and PHW respectively. Additionally, the anode biofilm exhibited spatial variations in response to local environmental conditions. In conclusion, onsite parallel or serial operations of multiple MECs showed good performance using actual PHW with a record-high H 2 production rate of 0.5 L L R day –1 for MEC over 10 liters scale, and the optimal chemical oxygen demand (COD)-to-H 2 yield reached 0.127 kg-H 2 per kg-COD, supporting a self-sufficient, closed-loop upgrade to jet fuel.

08 HYDROGEN↗

Effect of Light Water Reactor Water Environments on the Fatigue Life of Reactor Materials

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Code) provides rules for the design of Class 1 components of nuclear power plants. Figures I-9.1 through I-9.6 of Appendix I to Section III of the Code specify fatigue design curves for applicable structural materials. However, the Code design curves do not explicitly address the effects of light water reactor (LWR) water environments. Existing fatigue strain-vs.-life (ε-N) laboratory data illustrate potentially significant effects of LWR water environments on the fatigue resistance of pressure vessel and piping steels. Extensive studies have been conducted at Argonne National Laboratory and elsewhere since 1990 to investigate the effects of LWR environments on the fatigue life of piping and pressure vessel steels. This article summarizes the results of these studies. Existing fatigue ε-N data were evaluated to identify the various material, environmental, and loading conditions that influence fatigue crack initiation; a methodology for estimating fatigue lives as a function of these parameters was developed. The effects were incorporated into the ASME Code Section III fatigue evaluations in terms of an environmental correction factor, F en , which is defined as the ratio of fatigue life in air at room temperature to the fatigue life in the LWR water environment at reactor operating temperatures. Available fatigue data were used to develop fatigue design curves for carbon and low-alloy steels, austenitic stainless steels, and nickel-chromium-iron (NiCr-Fe) alloys and their weld metals in air at room temperature. A review of the Code Section III fatigue adjustment factors of 2 on strain and 20 on life is also presented and the possible conservatism inherent in the choice of these adjustment factors is evaluated. A brief description of potential effects of neutron irradiation on fatigue crack initiation for these structural materials is also presented.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Subchannel analysis on CGNPC SCWR

SCWR, as one of the candidates of six generation 4 reactors, is the water cooled reactor operating above the critical point. The investigation on SCWR was popular worldwide and amount of concepts were proposed by different country. Chinese Guangdong Nuclear Power Company (CGNPC) also designed a SCWR based on the Double-row Assembly. Based on the power distribution in different stage of the fuel cycle obtained by neutronics physics, the first pass and the second pass were calculated using ATHAS code, respectively, and the maximum cladding temperatures were obtained, which was satisfied the design limitation. The sensitivity of the geometry parameters was analyzed, and the optimum on the assembly design was carried. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Preliminary studies on diversion and misuse for TRISO-fueled heat-pipe-cooled microreactors

Microreactors are being developed by multiple reactor designers to mass-produce nuclear facilities for worldwide deployment. Including microreactors in a country’s energy portfolio introduces new concerns for international safeguards regarding the number of reactor locations. Microreactors have smaller quantities of nuclear material compared to current light-water reactors, which makes diverting enough material for clandestine purposes difficult for a single reactor. Diversion or misuse of multiple microreactors to obtain a significant quantity introduces a new acquisition pathway. This work examines diversion and misuse scenarios for a realistic heat-pipe-cooled microreactor to understand how these scenarios would effect reactor operations to determine if monitoring key parameters could reduce the burden of inspection on monitoring agencies. Here, we determined misuse caused too drastic of an effect on core operations to be a valid acquisition pathway for the realistic heat-pipe-cooled microreactor. Diversion was explored across varying levels of severity, where potential diversion scenarios could yield one significant quantity of material from between six and eleven microreactors. Through examining the critical control drum angle, excess reactivity, control drum worth, and power distribution changes from nominal were detected over the operational lifetime, which could indicate a divergence from normal operations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Physics-Based Multi-State Models of Passive Component Degradation for the R7 Reactor Simulation Environment

Abstract: The Next Generation Systems Analysis Code - referred to as R7 - is reactor systems simulation software being developed to support the Risk-Informed Safety Margin Characterization Pathway of the U.S. Department of Energy's Light Water Reactor Sustainability Program. It will provide an integrated multi-physics environment, implemented in an uncertainty quantification (UQ) framework that can produce risk and other performance insights on long-term reactor operations. An element of this simulation environment will be the performance of passive components and materials. Conventional models of component reliability are largely parametric, relying on plant service data to estimate component lifetimes and failure rates. This type of model has limited usefulness in the R7 environment where the intent is to explicitly determine the influence of physical stressors on component degradation. In this paper, we describe a new class of multi-state physics-based component models designed to be R7-compatible. These models capture the physics of materials degradation while also incorporating the effects of interventions and component rejuvenation. The models are implemented in a cumulative damage framework that allows the impact of an evolving physical environment to be addressed without recourse to resampling within the Monte Carlo-based UQ framework. The paper describes an application to stress corrosion cracking in dissimilar metal welds - a principal contributor to potential loss of coolant accidents. So while R7 will have the more conventional capability of reactor simulation codes to model the impact of degraded components and systems on plant performance, the methodology described here allows R7 to model the inverse effect; the impact of the physical environment on component degradation and performance.

PRA, passive components, stress corrosion cracking↗

Technology Development for Dry Storage of Aluminum-Clad Spent Nuclear Fuel - 20490

A candidate disposition pathway for the > 13 MTHM of aluminum-clad spent nuclear fuel (ASNF), owned and managed by the U.S. Department of Energy, is the drying and placement of the SNF into sealed-canister dry storage, with the ASNF-in- canisters 'road-ready' for transportation to and final direct disposal in a repository waste package. Technical information gaps in fuel drying, and fuel dry storage behavior, have previously challenged the declaration of technology readiness for drying and placement of this fuel into the DOE Standard Canister design for > 50 years of safe dry storage. The principal technical information gaps included: i) characterization and thermal dehydration behavior of aluminum (oxy)hydroxide films attendant on the cladding due to film formation during reactor operation and during post-discharge up to long-term wet storage histories; and ii) G-value data to enable estimation of the radiolytic gas generation from the cladding with its (oxy)hydroxide films. Thus, the oxide films on the ASNF challenged the safety of a sealed storage canister with thermal and radiolytic decomposition of the waters on the films that can lead to corrosion, pressurization, and flammability issues. These gaps in the technical information base have largely been closed. This paper discusses the investigations at the Idaho National Laboratory (INL) and the Savannah River National laboratory (SRNL), and outlines the pending technology development work for input to an engineering design to enable a road-ready dry storage system for ASNF. The ASNF inventory considered for road-ready dry storage is stored at the Savannah River Site (SRS) and at the Idaho Nuclear Technology and Engineering Center (INTEC) at the INL. The ASNF inventory in the SRS L Basin is from foreign and domestic research reactors (FRR and DRR), and is diverse in terms of design, irradiation, and post-reactor-discharge storage conditions; these factors yield a range of characteristics of cladding oxide films on ASNF. Mixed aluminum (oxy)hydroxide (boehmite and bayerite/gibbsite) films, non-uniform in thicknesses up to a maximum local thickness bounded by 25 μm, were observed on ASNF materials removed from wet storage in the L Basin and in non-sealed dry storage at the SRS following reactor service and a long-term (up to 40+ years) interim storage history. The ASNF inventory at INTEC, in both wet and vented dry storage, is predominantly from the Advanced Test Reactor (ATR), but it also includes DRR and FRR fuel. To address a profound behavior of these films, radiolysis testing of aluminum specimens with mixed type boehmite/bayerite oxide films was performed to develop basic data on G-values for production of radiolytic hydrogen under dry storage conditions with nominal relative humidity, temperature, and cover gas. Modeling and simulation of canister internal environments with postulated inventories of oxide films provides estimation of the evolution of the conditions of the canister loaded with ASNF. Simultaneous Thermal Analysis (TGA/DSC) of hydrated oxide powders, and laboratory-scale aluminum specimens with a bayerite film (∼10 μm) using TGA methods, inform drying time/temperature conditions to be used for the ASNF. A demonstration project is recommended for Verification and Validation of the drying and storage of the ASNF. Remaining major tasks leading up to the hot demonstration include scale-up radiolysis testing and scale-up drying testing. Engineering design with the information from the technology program will establish the safety basis and enable long-term (> 50 years) dry storage compatibility with ASNF in the DOE Standard Canister pending its transportation to and disposal in a repository. This full capability would show the ASNF-in-canister storage system to be road-ready. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of LWR Fuels with Enhanced Accident Tolerance ATF Feasibility Analysis and Final Technical Report Deliverable for the Westinghouse Accident Tolerant Fuel Program (Rev. 2)

The beyond design basis accident at Fukushima Daiichi in March 2011 and the Three Mile Island accident in 1979 imply that severe nuclear accidents may occur at somewhat higher frequencies than previously predicted, and that the financial liabilities of such accidents can cripple a utility. While current fuel is more than adequate for design basis accidents, the potential for harm from beyond design basis accidents (BDBA) has been a driver for Westinghouse development efforts since 2003. After Fukushima, other fuel vendors also began pursuing new fuel materials that can provide significant increases in the time, enabling reactor operators to respond to unforeseen events before significant releases of fuel materials and fission products occur. In order to be commercially successful, accident tolerant fuel (ATF) products must also provide significant fuel cost savings, operating cost improvements as well as safety improvements. This report documents the engineering, design and testing that occurred from October 1, 2016, through September 30, 2018, by the Westinghouse team. In addition, it includes: 1. The results of modeling and simulation work completed to date that supports technical feasibility of the ATF concept in meeting the goals of the enhanced ATF program including a core level analysis predicting how an existing LWR will perform when loaded with ATF. 2. Regulatory Analysis showing path to LTA/LTR acceptance. 3. Business Analysis showing commercial viability of the ATF concept.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Grade 91 inelastic model for incorporation in ASME Division 5

This report describes a unified viscoplastic model for Grade 91 suitable for use with the Section III, Division 5 design by inelastic analysis procedures in the ASME Boiler and Pressure Vessel Code. The report identifies several key features a successful design inelastic model must capture along with critical aspects of the response of Grade 91 for elevated temperature loading conditions typical of expected reactor operating conditions. An inelastic model for Code design must capture the average response of a material including heat-to-heat and product form variations. This work develops a method for calibrating such a model to a large experimental database using genetic algorithm optimization. Finally, the report compares the final model to several specialized experimental tests to validate that it will be suitable for use in high temperature structural design. The techniques developed here can be applied to the remaining Section III, Division 5, Class A materials to develop a nonmandatory appendix to the Code describing inelastic material models suitable for use with the design by inelastic analysis procedures.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Summary Technical Report for Conceptual Design of MARCH-SERTTA

The Transient Reactor Test facility (TREAT) was constructed in the late 1950’s, provided thousands of transient irradiations before being placed in standby in 1994, and resumed reactor operations in 2017 in order to reclaim its crucial role in nuclear-heated safety research [1]. Starting in September of 2018, TREAT performed its first series of new fueled transient experiments using a novel modular irradiation vehicle, termed the Minimal Activation Retrievable Capsule Holder (MARCH) system. The MARCH system was developed to support high throughput testing and post transient examination by using fresh fuel samples arranged in low-activation hardware materials. Deployment of this irradiation vehicle system was supported by the Accident Tolerant Fuels (ATF) program. These initial experiments used inert gas atmosphere capsules (referred to as the Separate Effects Test Holder, SETH) containing small rodlets composed of UO2 pellets in zirconium alloy cladding with temperature measurement instruments. The initial SETH campaign was conducted in order to commission irradiation capabilities and deepen the understanding of specimen to core energy coupling. Building upon the successes of the initial SETH campaign, an evolution of the capsule design has been conceptualized in order to support the same kind of high throughput, cost effective, rodlet scale testing, but with the notable improvement of being able to immerse specimens in liquid water for testing conditions better representing Light Water Reactors (LWR). This capsule is referred to as the MARCH system Static Environment Rodlet Transient Test Apparatus (MARCH-SERTTA).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Elastic moduli of high-density, sintered monoliths of yttrium dihydride

Yttrium dihydride has been considered as potential nuclear reactor moderator for micro-reactors operating in the thermal energy spectrum due to their ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. Despite these advantages, it is difficult to prepare yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to volume expansion upon hydriding and the pyrophoric nature of the material. In this work, high-density monoliths of yttrium dihydride were prepared by direct hydriding and using powder metallurgical methods. Resonant ultrasound spectroscopy was used to measure the elastic moduli of the sintered monoliths, while nanoindentation was used to determine the Young’s modulus and hardness of the directly-hydrided yttrium and the sintered monoliths. Single crystal elastic constants and related properties of yttrium dihydride were also determined using density functional theory (DFT) for comparison. We report mechanical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgy, this result indicated that the monoliths produced by powder metallurgy were of high quality. To that end, powder metallurgy is believed to be a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

Modified versions of the fuel performance codes RTOP and RTOP-CA

RTOP code predicts thermal and mechanical behavior of LWR fuel rods and release of GFPs both in normal stationary and transient operation modes, and transient power ramps, specific to the reactivity-initiated accidents (RIA). Computational domains of the code include fuel column, zirconium cladding, gas under cladding, and fuel microstructure - UO{sub 2} grain and the development of gaseous porosity of different origin during irradiation. RTOP-CA code is based on the RTOP code. It simulates the behavior of a fuel rod with cladding rupture opening and RFPs release into the primary coolant circuit in normal operation modes. The paper presents the results of development and validation of engineering models, which take into account characteristics of the neutron spectrum during the fuel cycle and are integrated into modernized versions of the fuel performance codes RTOP and RTOP-CA. The paper focuses on the detailed description of two models. Four-group neutron-physical engineering model describes burn-out of gadolinium isotopes and calculates spatial power profile in a Gd-doped fuel rod pellet. The second engineering model presented is developed for fast estimation of fuel burnup in case of fuel rod cladding leakage accident. The comparison of the present calculations with the results of calculations by neutron codes shows that the model describes the heat rate distribution and the gadolinium burn-out with sufficient accuracy. The code also calculates the LHR of Gd-doped fuel rods given the heat rate of the adjacent UO{sub 2} fuel rods. This work allows determining the histories of LHR for the Gd-doped fuel rod from the average LHR of FA for various equilibrium WWER fuel cycles, power units and fuel enrichments. The presented model is implemented in the RTOP fuel performance code to calculate the thermomechanical behavior of the fuel rods. An engineering-physical model is developed for fast estimation of {sup 134}Cs/{sup 137}Cs activity ratio in fuel taking into account the parameters of the neutron spectrum during the fuel cycle. Implementation of the model enables to increase the reliability of correct fuel burnup determination in a failed fuel assembly (FA)based on the FERDS activity measurements during reactor operation. Results of the model calculations obtained for the FAs with a higher fuel enrichment and the NPP activity measurements have shown a higher {sup 134}Cs/{sup 137}Cs activity ratio compared to the values for the fuel with enrichment up to 3.6 wt. % in {sup 235}U. Currently, the engineering model is applicable within the range of UO{sub 2} enrichment from 3 to 5 wt. % in {sup 235}U, and Gd{sub 2}O{sub 3} enrichment from 5 to 8 wt. %.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Initial Developments in Modeling Graphite Behavior

Graphite is used in High Temperature Reactor designs as a moderator, reflector and core material responsible for protecting the fuel and maintaining structural stability. From a safety perspective, it is imperative to be able to predict how graphite will behave under reactor operating conditions which may compromise the core’s structural integrity or fuel’s safety performance. The following report summarizes recent modeling work undertaken at Idaho National Laboratory which focuses on graphite degradation behavior. One phenomenon which is explored in this report and can cause significant degradation to graphite properties is oxidation. Oxidation behavior in graphite is highly temperature dependent. At low temperatures, oxygen can fully penetrate a component and cause a homogeneous damage profile. At high temperatures, only the graphite near the surface of a component is affected. Understanding and modeling this temperature dependence is essential to predicting graphite behavior. In this report, three graphite models are discussed. The first model is used to investigate strength loss after low temperature oxidation. It does this by generating an approximate graphite microstructure then determining the required load to cause crack propagation. It has been shown that the model reproduces the quasi brittle stress versus strain relationship observed in graphite. Strength loss results from the model are shown to match experimental values. The second model investigates strength loss under high temperature oxidation conditions. This model is more applicable to full scale graphite components where the oxidation damage is often inhomogeneous throughout a component. The third model computes stresses in graphite under reactor conditions. Specifically, the model incorporates the effect of creep, irradiation dose, thermal strains, and oxidation in order to predict internal stresses in a component. All of these models are implemented in the Multiphysics Object-Oriented Simulation Environment (MOOSE), an open source, parallel finite element framework.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hydrogen Diffusivity Measurements of YH 1.87 Moderator Material with Incoherent Quasielastic Neutron Scattering

Yttrium hydride is an optimal choice of moderator material for thermal neutron spectrum reactors requiring small core volumes. The Transformation Challenge Reactor (TCR) program at Oak Ridge National Laboratory (ORNL) aims to develop an additively manufactured microreactor core by leveraging recent advances in materials, manufacturing, data analytics, and high-fidelity modeling and simulation. Yttrium hydride was selected as the moderator material for TCR due to its high moderating power, which enables the spatially efficient reactor design and thermal stability that is superior when compared with zirconium hydride. Hydrogen desorption from yttrium hydride is expected at elevated temperatures, posing safety and performance concerns. As a lifetime component in advanced reactors, appropriate strategies to mitigate hydrogen release from yttrium hydride over long-term reactor operation are required. Understanding hydrogen mobility in yttrium hydride provides the scientific basis for developing a hydrogen barrier for hydride moderator and predicting the hydrogen redistribution within the material during various operational conditions. This study investigated the hydrogen motion in YH 1.87 as a function of temperature ranging from 200 to 1,173 K using incoherent quasielastic neutron scattering (IQNS) at the Spallation Neutron Source (SNS). The results are presented and discussed in terms of hydrogen self-diffusion coefficients, activation energy for translational hydrogen motion, and hydrogen jump distances. Based on the IQNS data, YH 1.87 is found to be stable at high temperatures with no translational H motion below 1,023 K within the IQNS detection limits. In the temperature range of 1,073–1,173 K, hydrogen diffusivity in YH 1.87 is $D = 4.57 X 10^{⁻3} [m^2/s] exp (⁻\frac{1.73[eV]}{RT}$). The hydrogen concentration’s dependence on hydrogen diffusivity is also discussed in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Detecting self-ion irradiation-induced void swelling in pure copper using transient grating spectroscopy

Irradiation-induced void swelling remains a major challenge to nuclear reactor operation. Swelling may take years to initiate and often results in rapid material property degradation once started. Alloy development for advanced nuclear systems will require rapid characterization of the swelling breakaway dose in new alloys, yet this capability does not yet exist. In this paper, we demonstrate that transient grating spectroscopy (TGS) can detect void swelling in single crystal copper via changes in surface acoustic wave (SAW) velocity. Scanning transmission electron microscopy (STEM) links the TGS-observed changes with void swelling-induced microstructural evolution. Finally, these results are considered in the context of previous work to suggest that in situ TGS will be able to rapidly determine when new bulk materials begin void swelling, shortening alloy development and testing times.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Fusion Nuclear Science Pathways Assessment

With the strong commitment of the US to the success of the ITER burning plasma mission, and the project overall, it is prudent to consider how to take the most advantage of this investment. The production of energy from fusion has been a long sought goal, and the subject of several programmatic investigations and time line proposals. The nuclear aspects of fusion research have largely been avoided experimentally for practical reasons, resulting in a strong emphasis on plasma science. Meanwhile, ITER has brought into focus how the interface between the plasma and engineering/technology, presents the most challenging problems for design. In fact, this situation is becoming the rule and no longer the exception. ITER will demonstrate the deposition of 0.5 GW of neutron heating to the blanket, deliver a heat load of 10-20 MW/m 2 or more on the divertor, inject 50-100 MW of heating power to the plasma, all at the expected size scale of a power plant. However, in spite of this, and a number of other technologies relevant power plant, ITER will provide a low neutron exposure compared to the levels expected to a fusion power plant, and will purchase its tritium entirely from world reserves accumulated from decades of CANDU reactor operations. Such a decision for ITER is technically well founded, allowing the use of conventional materials and water coolant, avoiding the thick tritium breeding blankets required for tritium self-sufficiency, and allowing the concentration on burning plasma and plasma-engineering interface issues. The neutron fluence experienced in ITER over its entire lifetime will be ~ 0.3 MW-yr/m 2 , while a fusion power plant is expected to experience 120-180 MW-yr/m 2 over its lifetime. ITER utilizes shielding blanket modules, with no tritium breeding, except in test blanket modules (TBM) located in 3 ports on the midplane, which will provide early tests of the fusion nuclear environment with very low tritium production (a few g per year).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Shim Arm Depletion in the NBSR

The cadmium shim arms in the NBSR undergo burnup during reactor operation and hence, require periodic replacement. Presently, the shim arms are replaced after every 25 cycles to guarantee they can maintain sufficient shutdown margin. Two prior reports document the expected change in the 113Cd distribution because of the shim arm depletion. One set of calculations was for the present high-enriched uranium fuel and the other for the low-enriched uranium fuel when it was in the COMP7 configuration (7 inch fuel length vs. the present 11 inch length). The depleted 113Cd distributions calculated for these cores were applied to the current design for an equilibrium low-enriched uranium core. This report details the predicted effects, if any, of shim arm depletion on the shim arm worth, the shutdown margin, power distributions and kinetics parameters.

42 ENGINEERING↗

Effects of transient fission gas release on rod balloon burst behavior during a loss-of-coolant accident

The US nuclear energy industry is investigating strategies to increase the reactor operating cycle to 24 months, which would result in rod average burnups exceeding the current limit of 62 GWd/tU. To support this goal, multiphysics simulations tools and methodologies are being developed to predict the effects of this change during transient events such as loss-of-coolant accidents (LOCAs). In this work, two cladding burst correlations were used to predict cladding failure. Here, these were coupled with three transient fission gas release (tFGR) models and were implemented in the BISON fuel performance code to quantify any changes in cladding burst behavior during a large-break LOCA. First, a simple linear model was used to perform a sensitivity analysis of a single fuel rod. Second, a tFGR model available in BISON was applied to 281 fuel rods throughout the core. The third model examined was an empirical correlation based on data from the literature.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗