Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase transitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

[N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4}: Ferroelectric properties and characterization of phase transitions by Raman spectroscopy

The X-ray powder diffraction pattern shows that at room temperature, [N(CH{sub 3}){sub 3}H]{sub 2}ZnCl{sub 4} is crystallized in the orthorhombic system with Pnma space group. The phase transitions at T{sub 1} = 255 K, T{sub 2} = 282 K, T{sub 3} = 302 K, T{sub 4} = 320 K, and T{sub 5} = 346 K have been confirmed by the differential scanning calorimetry. The electrical technique was measured in the 10{sup −1}–10{sup 7 }Hz frequency range and 233–363 K temperature intervals. The temperature dependence of the dielectric constant at different temperatures proved that this compound is ferroelectric below 282 K. Besides, [N(CH{sub 3}){sub 3 }H]{sub 2}ZnCl{sub 4} shows classical ferroelectric behaviour near curie temperature. In order to characterize the phase transitions, Raman spectra have been recorded in the temperature range of 233–383 K and the frequency range related to the internal and external vibrations of the cations and anions (90–4000 cm{sup −1}). The temperature dependence of the Raman line shifts ν and the half-width Δν detects all phase transitions and confirms their nature, especially at 282 K that corresponds to the ferroelectric-paraelectric phase transition.

36 MATERIALS SCIENCE↗

Canonical partition function and finite density phase transition in lattice QCD

We discuss the nature of the phase transition for lattice QCD at finite temperature and density. We propose a method to calculate the canonical partition function by fixing the total quark number introducing approximations allowed in the low density region. An effective potential as a function of the quark number density is discussed from the canonical partition function. We analyze data obtained in a simulation of two-flavor QCD using p4-improved staggered quarks with bare quark mass m/T=0.4 on a 16{sup 3}x4 lattice. The results suggest that the finite density phase transition at low temperature is of first order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase Transitions in Ge-Te Phase Change Materials Studied by Time-resolved X-ray Diffraction

Resistivity versus temperature measurements and time-resolved x-ray diffraction were used to study Ge-Te phase change materials. Resistivity versus temperature measurements showed one sharp drop in resistivity for films with 30, 50, and 70 at.?% Ge, two steps for films with 40 at.?% Ge, and a gradual transition for films with 60 at.?% Ge. Films with 30, 50, and 70 at.?% Ge crystallized in a single-step process with GeTe and Te, only GeTe, and GeTe and Ge diffraction peaks, respectively. Films with 40 and 60 at.?% Ge crystallized in a two-step process with GeTe peaks appearing first and additional Te or Ge peaks, respectively, appearing at higher temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure induced phase transition and elastic properties of cerium mono-nitride (CeN)

In the present paper, we have investigated the high-pressure structural phase transition and elastic properties of cerium mono-nitride. We studied theoretically the structural properties of this compound (CeN) by using the improved interaction potential model (IIPM) approach. This compound exhibits first order crystallographic phase transition from NaCl (B{sub 1}) to tetragonal (BCT) phase at 37 GPa. The phase transition pressures and associated volume collapse obtained from present potential model (IIPM) show a good agreement with available theoretical data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transitions of cesium azide at pressures up to 30 GPa studied using in situ Raman spectroscopy

Cesium azide has been studied by Raman spectroscopy at pressures up to ≈30 GPa at room temperature. The sequence of phase transitions to Phase III (at 0.5 GPa), Phase IV (at 4.3 GPa), and Phase V (at ≈19 GPa) has been observed in agreement with recent X-ray diffraction studies. Phase III has been found to adopt a monoclinic C2/m structure with two azide anions in nonequivalent positions, where one set of azide anions appears to be orientationally disordered according to the observed Raman spectra. The transition to Phase IV has been associated with orientational ordering of azide anions, while the transition to Phase V has been shown to proceed with a lowering of crystal symmetry. Moreover, spectroscopic features indicate a possible change of bonding in CsN{sub 3} toward formation of covalent bonds at high pressures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Boosting electrochemical reaction and suppressing phase transition with a high-entropy O3-type layered oxide for sodium-ion batteries

Complex phase transitions induced by interlayer slides in layered cathode materials lead to poor cycling stability and rate capability for sodium-ion batteries. Herein, we design and prepare a new six-component high-entropy oxide (HEO) layered cathode O3–Na(Fe 0.2 Co 0.2 Ni 0.2 Ti 0.2 Sn 0.1 Li 0.1 )O 2 to enable highly reversible electrochemical reaction and phase-transition behavior. The HEO cathode exhibits good cycling performance (capacity retention of ~81% after 100 cycles at 0.5C) and outstanding rate capability (capacity of ~81 mA h g –1 at 2.0C) due to the higher sodium diffusion coefficient (above 5.75 × 10 –11 cm 2 s –1 ) than most reported O3-type cathodes. Moreover, the high-entropy cathode has superior compatibility with the hard carbon anode and delivers a specific capacity of 90.4 mA h g –1 (energy density of ~267.5 W h kg –1 ). Ex situ X-ray diffraction proves that the high-entropy designing effectively suppresses the intermediate phase change to achieve reversible O3–P3 phase evolution, and in turn stabilizes the layered structure. X-ray absorption spectroscopy and Mössbauer spectrum of 57 Fe suggest that Ni 2+ /Ni 3.5+ , Co 3+ /Co 3.5+ , and part of Fe 3+ /Fe 3.5+ redox reaction contribute the charge compensation. Finally, the enhanced performance can be attributed to the disordered distribution of multi-component transition metals in HEO suppressing the ordering of electric charges and sodium vacancies, thereby inhibiting the interlayer slide and phase transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Holographic endpoint of spatially modulated phase transition

In a previous paper [S. Nakamura, H. Ooguri, and C. S. Park, Phys. Rev. D 81, 044018 (2010)], we showed that the Reissner-Nordstroem black hole in the five-dimensional anti-de Sitter space coupled to the Maxwell theory with the Chern-Simons term is unstable when the Chern-Simons coupling is sufficiently large. In the dual conformal field theory, the instability suggests a spatially modulated phase transition. In this paper, we construct and analyze nonlinear solutions which describe the endpoint of this phase transition. In the limit where the Chern-Simons coupling is large, we find that the phase transition is of the second order with the mean field critical exponent. However, the dispersion relation with the Van Hove singularity enhances quantum corrections in the bulk, and we argue that this changes the order of the phase transition from the second to the first. We compute linear response functions in the nonlinear solution and find an infinite off-diagonal DC conductivity in the new phase.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microgravity Studies of Liquid-Liquid Phase Transitions in Alumina-Yttria Melts

The scientific objective of this research is to increase the fundamental knowledge base for liquid- phase processing of technologically important oxide materials. The experimental objective is to define conditions and hardware requirements for microgravity flight experiments to test and expand the experimental hypotheses that: 1. Liquid phase transitions can occur in undercooled melts by a diffusionless process. 2. Onset of the liquid phase transition is accompanied by a large change in the temperature dependence of melt viscosity. Experiments on undercooled YAG (Y3A15012)- and rare earth oxide aluminate composition liquids demonstrated a large departure from an Arrhenian temperature dependence of viscosity. Liquid YAG is nearly inviscid at its 2240 K melting point. Glass fibers were pulled from melts undercooled by ca. 600 K indicating that the viscosity is on the order of 100 Pans (1000 Poise) at 1600 K. This value of viscosity is 500 times greater than that obtained by extrapolation of data for temperatures above the melting point of YAG. These results show that the liquids are extremely fragile and that the onset of the highly non-Arrhenian viscosity-temperature relationship occurs at a temperature considerably below the equilibrium melting point of the solid phases. Further results on undercooled alumina-yttria melts containing 23-42 mole % yttrium oxide indicate that a congruent liquid-liquid phase transition occurs in the undercooled liquids. The rates of transition are inconsistent with a diffusion-limited process. This research is directed to investigation of the scientifically interesting phenomena of polyamorphism and fragility in undercooled rare earth oxide aluminum oxide liquids. The results bear on the technologically important problem of producing high value rare earth-based optical materials.

Guynes, Buddy↗

Phase Transition and Criticality of Methane Confined in Nanopores

For the first time, the phase transition and criticality of methane confined in nanoporous media are measured. The measurement is performed by establishing an experimental setup utilizing a differential scanning calorimeter (DSC) capable of operating under very low temperatures as well as high pressures to detect the capillary phase transition of methane inside nanopores. By performing experiments along isochoric cooling paths, both the capillary condensation and the bulk condensation of methane are detected. Here, the pore critical point (PCP) of nanoconfined methane is also determined and then used to derive the parameters of a previously developed self-consistent equation of state based on the Generalized van der Waals (vdW) partition function. Using this parameter, the equation of state can predict the capillary-condensation curves that agree well with the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kibble-Zurek mechanism for nonequilibrium phase transitions in driven systems with quenched disorder

Abstract We show that the Kibble-Zurek mechanism applies to nonequilibrium phase transitions found in driven assemblies of superconducting vortices and colloids moving over quenched disorder where a transition occurs from a plastic disordered flowing state to a moving anisotropic crystal. We measure the density of topological defects as a function of quench rate through the nonequilibrium phase transition, and find that on the ordered side of the transition, the topological defect density ρ d scales as a power law, $${\rho }_{{{{{{{{\rm{d}}}}}}}}}\propto 1/{t}_{{{{{{{{\rm{q}}}}}}}}}^{\beta }$$ ρ d ∝ 1 / t q β , where t q is the quench time duration, consistent with the Kibble-Zurek mechanism. We show that scaling with the same exponent holds for varied strengths of quenched disorder and that the exponents fall in the directed percolation universality class. Our results suggest that the Kibble-Zurek mechanism can be applied to the broader class of systems that exhibit absorbing phase transitions.

97 MATHEMATICS AND COMPUTING↗

Quantum phase transition in solid hydrogen at high pressure

Extensive experimental and theoretical studies have been devoted to determining the high-pressure phase diagram of hydrogen. Here we present evidence of a phase at a higher pressure than phase III and below the pressure of the recently observed phase of metallic hydrogen (495 GPa). This phase was determined from infrared (IR) spectroscopy of hydrogen samples at static pressures above 360 ± 15 GPa in a diamond anvil cell, and has been observed in three separate experiments. Whereas earlier studies found new high-pressure phases that only occurred at elevated temperatures, this phase transition occurs at the lowest temperatures investigated, ~5 K, and the steep phase line indicates that it is a quantum phase transition. This phase is characterized by two distinct IR absorption bands (2950 and 3335 c m –1 at 365 GPa). Above the transition pressure we observe strong darkening of the sample in the visible spectrum as pressure is increased. Observations are compatible with the cmca-12 crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure, phase transitions, and isotope effects in [(CH3)4N]2PuCl6

The single crystal X-ray diffraction structure of [(CH3)4N]2PuCl6 is presented for the first time, resolving long standing confusion and speculation regarding the structure of this compound in the literature. A temperature dependent study of this compound shows that the structure of [(CH3)4N]2PuCl6 undergoes no fewer than two phase transitions between 100 and 360 K. The phase of [(CH3)4N]2PuCl6 at room temperature is Fd-3c a = 26.012(3) Å. At 360 K, the structure is in space group Fm-3m with a = 13.088(1) Å. The plutonium octahedra and tetramethylammonium cations undergo a rotative displacement and the degree of rotation varies with temperature, giving rise to the phase transition from Fm-3m to Fd-3c as the crystal is cooled. Synthesis and structural studies of the deuterated salt [(CD3)4N]2PuCl6 suggest that there is an isotopic effect associated with this phase transition as revealed by a changing transition temperature in the deuterated versus protonated compound indicating that the donor-acceptor interactions between the tetramethylammonium cations and the hexachloroplutonate anions are driving the phase transformation.

crystallography↗

Rate-dependent phase transition of high density polyethylene

Quasi-static and dynamic tension tests are conducted on a widely used semicrystalline polymer, high density polyethylene (HDPE), to explore the strain rate effects on phase transition. HDPE exhibits considerable strain-rate hardening. In situ , high-speed x-ray diffraction demonstrates a martensitic transformation from the orthorhombic to monoclinic phase during both loading conditions. However, compared to quasi-static loading, the phase transition occurs at a lower bulk strain but higher stress under dynamic loading (strain rate 5100 s –1 ), suggesting strain-rate-accelerated phase transition dynamics. Furthermore, evolutions of lattice strain with bulk stress indicate different roles of amorphous and crystalline phases in deformation under different strain rates.

36 MATERIALS SCIENCE↗

An isogeometric finite element formulation for phase transitions on deforming surfaces

This paper presents a general theory and isogeometric finite element implementation for studying mass conserving phase transitions on deforming surfaces. The mathematical problem is governed by two coupled fourth-order nonlinear partial differential equations (PDEs) that live on an evolving two-dimensional manifold. For the phase transitions, the PDE is the Cahn–Hilliard equation for curved surfaces, which can be derived from surface mass balance in the framework of irreversible thermodynamics. For the surface deformation, the PDE is the (vector-valued) Kirchhoff–Love thin shell equation. Both PDEs can be efficiently discretized using C 1 -continuous interpolations without derivative degrees-of-freedom (dofs). Structured NURBS and unstructured spline spaces with pointwise C 1 -continuity are utilized for these interpolations. The resulting finite element formulation is discretized in time by the generalized-α scheme with adaptive time-stepping, and it is fully linearized within a monolithic Newton–Raphson approach. A curvilinear surface parameterization is used throughout the formulation to admit general surface shapes and deformations. The behavior of the coupled system is illustrated by several numerical examples exhibiting phase transitions on deforming spheres, tori and double-tori.

42 ENGINEERING↗

Scaling study of magnetic phase transition and critical behavior in Nd0.55Sr0.45Mn0.98Ga0.02O3 manganite

Highlights: • The sample of Nd{sub 0.55}Sr{sub 0.45}Mn{sub 0.98}Ga{sub 0.02}O{sub 3} was synthesized via a solid state reaction route. • The PM to FM phase transition of this sample is found to be of second-order. • The critical behaviors and scaling relation for Nd{sub 0.55}Sr{sub 0.45}Mn{sub 0.98}Ga{sub 0.02}O{sub 3} have also been investigated by modified Arrott plot and critical isotherm analysis. • The estimated critical exponents are close to the values for 3D-Ising model. - Abstract: Microscopic magnetic interactions and magnetism can be probed by studying the critical paramagnetic–ferromagnetic phase transition of magnetic materials. In this work, the critical behavior of the lightly Ga-doped manganites Nd{sub 0.55}Sr{sub 0.45}Mn{sub 0.98}Ga{sub 0.02}O{sub 3} (NSMGO) has been investigated. Scaling analysis reveals the critical exponents β = 0.308, γ = 1.197, and δ = 4.916, where their self-consistency and reliability are verified by the Widom scaling law and the scaling equation. These exponents indicate that the magnetic phase transition in NSMGO belongs to the anisotropic 3D-Ising universality class. Nevertheless, the asymptotic critical exponents β{sub eff} and γ{sub eff} are found to approach to the values of 3D-Heisenberg model, implying the existence of isotropic short-range magnetic interactions. We suggest that, although the Nd-based manganites possess a strong magnetocrystalline anisotropy, this effect can be partly averaged out in view of the present polycrystalline NSMGO. Therefore, in the asymptotic critical region, the phase transition reveals the crossover from the scaling of 3D-Ising toward 3D-Heisenberg universality class.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anatomy of the electroweak phase transition for dark sector induced baryogenesis

We investigate the electroweak phase transition patterns for a recently proposed baryogenesis model with CP violation originated in the dark sector. The model includes a complex scalar singlet-Higgs boson portal, a U(1) l gauge lepton symmetry with a Z ' gauge boson portal and a fermionic dark matter particle. We find a novel thermal history of the scalar sector, featuring a Z 2 breaking singlet vacuum in the early Universe driven by a dark Yukawa coupling, that induces a one-step strongly first order electroweak phase transition. We explore the parameter space that generates the observed matter-antimatter asymmetry and dark matter relic abundance, while being consistent with constraints from electric dipole moment, collider searches, and dark matter direct detection bounds. The complex singlet can be produced via the Higgs portal and decays into Standard Model particles after traveling a certain distance. We explore the reach for long-lived singlet scalars at the 13 TeV Large Hadron Collider with \( \mathcal{L} \) = 139 fb - 1 and show its impact on the parameter space of the model. Setting aside currently unresolved theoretical uncertainties, we estimate the gravitational wave signatures detectable at future observatories.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural dynamics of first-order phase transition in giant magnetocaloric La(Fe,Si) 13 : The free energy landscape

Maximizing the performance of magnetic refrigerators and thermomagnetic energy harvesters is imperative for their successful implementation and can be done by maximizing their operation frequency. One of the features delimiting the frequency and efficiency of such devices is the phase transition kinetics of their magnetocaloric/thermomagnetic active material. While previous studies have described the magnetic component governing the kinetics of the magnetovolume phase transition in La(Fe,Si) 13 giant magnetocaloric materials, a comprehensive description of its structural component has yet to be explored. In this study, in situ synchrotron X-ray diffraction is employed to describe the structural changes upon magnetic field application/removal. Long magnetic field dependent relaxation times up to a few hundred seconds are observed after the driving field is paused. The phase transition is found to be highly asymmetric upon magnetic field cycling due to the different Gibbs energy landscapes and the absence of an energy barrier upon field removal. An exponential relationship is found between the energy barriers and the relaxation times, suggesting the process is governed by a non-thermal activation over an energy barrier process. Such fundamental knowledge on first-order phase transition kinetics suggests pathways for materials optimization and smarter design of magnetic field cycling in real-life devices.

36 MATERIALS SCIENCE↗

Phase transitions of S=1 spinor condensates in an optical lattice

We study the phase diagram of spin-one polar condensates in a two-dimensional optical lattice with magnetic anisotropy. We show that the topological binding of vorticity to nematic disclinations allows for a rich variety of phase transitions. These include Kosterlitz-Thouless-like transitions with a superfluid stiffness jump that can be experimentally tuned to take a continuous set of values, and a cascaded Kosterlitz-Thouless transition, characterized by two divergent length scales. For higher integer spin bosons S, the thermal phase transition out of the planar polar phase is strongly affected by the parity of S.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗