Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PH VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Cu(II) Sorption Performance of Novel Chitosan/Ter-(vinyl pivalate-maleic anhydride-N-tert-butylacrylamide) Microcapsules

In this study, first, the ter-polymerization reaction between vinyl pivalate (VP), maleic anhydride (MA), and N-tert-butylacrylamide (NTBA) was done in inert atmosphere (N{sub 2}). FT-IR and {sup 1}HNMR spectroscopy was applied to study the chemical composition of the obtained ter-polymers. MA content of the ter-polymers was determined by following the chemical titration method. Second, novel chitosan/ter-(vinyl-pivalate-maleic-anhydride-N-tert-butylacrylamide) microcapsules were synthesized. In microcapsule production, chitosan polymer served as a matrix for acrylamide ter-polymers with four different molar ratios. The microcapsules were characterized by FT-IR and SEM analyses. Cu(II) sorption efficiency of the microcapsules were tested at different pH levels, temperature, sorbent dosage, and metal ion concentration. Comparison with blank chitosan microbeads revealed that incorporation of acrylamide ter-polymers into the cross-linked chitosan matrix increased the metal sorption. Sorption capacities of the sorbents were recorded; blank chitosan microbeads: 67.03 mg g{sup −1}, and chitosan/acrylamide ter-polymer microcapsules: in range of 75.39–98.64 mg g{sup −1}. The findings demonstrated chitosan/acrylamide ter-polymer microcapsules can be utilized in sorption of Cu(II) ions in water treatment.

36 MATERIALS SCIENCE↗

Preparation and Property Research of Perfluoropolyether Oil-Based Ferrofluid

In this study, perfluoropolyether oil-based ferrofluid was prepared to satisfy special demands in applications which are too harsh to conventional ferrofluids. Fe{sub 3}O{sub 4} magnetic nanoparticles were synthesized by co-precipitation and modified by perfluoropolyether carboxylic acid surfactant in the atmosphere without protective gas. Perfluoropolyether oil-based ferrofluid was prepared with modified nanoparticles and perfluoropolyether by high-energy ball milling. Properties of ferrofluid fabricated were verified through a series of experiments. Ferrofluid stability was tested by interval point-density method; the average density change is merely 0.0077 g/ml, and change rate is 0.37% after 500 days. Saturation magnetization is 582.46 Gs, much larger than the other four ferrofluids. The average volatility rate is 7.4985*10{sup − 5} g/h/cm{sup 2} at 80 °C after 260 h. Viscosity increases to 1825.7 mPa⋅ s under − 20 °C and still have mobility at − 40 °C. The ferrofluid can resist air blast for 8 h under 200 °C without oxidation or decomposition. Perfluoropolyether oil-based ferrofluid cannot be damaged by water or organic solvents. In addition, the ferrofluid can survive in pH = 1 acid or pH = 14 alkali at least 279 days without corrosion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solubility Measurements of Crystalline NiO in Aqueous Solution as a Function of Temperature and pH

Abstract Results of solubility experiments involving crystalline nickel oxide (bunsenite) in aqueous solutions are reported as functions of temperature (0 to 350 C) and pH at pressures slightly exceeding (with one exception) saturation vapor pressure. These experiments were carried out in either flow-through reactors or a hydrogen-electrode concentration cell for mildly acidic to near neutral pH solutions. The results were treated successfully with a thermodynamic model incorporating only the unhydrolyzed aqueous nickel species (viz., Ni2+ ) and the neutrally charged hydrolyzed species (viz., Ni(OH)02 ). The thermodynamic quantities obtained at 25 C and infinite dilution are, with 2 uncertainties: log10Ko s0 = (12.40 0.29), rGo m = (70.8 1.7) kJ mol 1; rHo m = (105.6 1.3) kJ mol 1; rSo m = (116.6 3.2) J K 1 mol 1; rCo p,m = (0 13) J K 1 mol 1; and log10Ko s2 = (8.76 0.15); rGo m = (50.0 1.7) kJ mol 1; rHo m = (17.7 1.7) kJ mol 1; rSo m = (108 7) J K 1 mol 1; rCo p,m = (108 3) J K 1 mol 1. These results are internally consistent, but the latter set differs from those gleaned from previous studies recorded in the literature. The corresponding thermodynamic quantities for the formation of Ni2+ and Ni(OH)02 are also estimated. Moreover, the Ni(OH) 3 anion was never observed, even in relatively strong basic solutions (mOH = 0.1 mol kg 1), contrary to the conclusions drawn from all but one previous study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solubility Measurements of Crystalline Cu2O in Aqueous Solution as a Function of Temperature and pH

The equilibrium solubility of crystalline cuprous oxide, cuprite, was measured in liquid water and steam using two flow-through reactors and a conventional batch autoclave. These measurements were carried out from 20 to 400 C. Different batches of pretreated cuprite were thoroughly characterized prior to and following each set of experiments. Metallic copper beads were added to the inlet end of the reactors and to the solid charge in the autoclave to preserve the Cu(I) oxidation state, although one series of experiments produced some results which were only compatible with CuO(cr) as the solubility limiting phase. Comparison of the solubility data for Cu2O(cr) in aqueous solution with those from the only available high-temperature dataset (Var yash, Geochem. Int. 26:80 90, 1989) showed that in near-neutral solutions the new data are lower by about four orders of magnitude at 350 C. Moreover, the dominant species in solution at temperatures 100 C were found to be only Cu+ and Cu(OH) 2 with Cu(OH)0 occurring over a narrow pH range at 75 C rather than the reverse trend reported previously. Solubility equations were developed as a function of temperature and pH, based on these new results, which showed increased solubility with temperature in acidic and basic solutions. The solubility of Cu2O(cr) in steam decreased slightly with temperature and as expected increased with increasing pressure to supercritical conditions where limited, compatible data were available in the literature. The solubility at subcritical conditions was on the order of one to several parts per billion, ppb. A simple empirical fit was derived for the solubility in steam as a function of temperature and pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control of optical absorption and fluorescence spectroscopies of natural melanin at different solution concentrations

The source of the optical properties of natural melanin persists as an impressive conundrum, hindering a thorough comprehension of the complicated photo-protective contribution of these extensive natural pigments and the pragmatic design of revolutionary bioinspired materials for optoelectronic functionalities. Melanin is a natural pigment distributed in vivo, and provides protection from the sun rays, exhibiting a strong wide-band UV–visible absorption. In the present study, we investigated the optical properties of natural melanin at different pH concentrations within the framework of experimental techniques, namely, UV–visible absorption, Fourier transform infrared spectroscopy (FTIR), and fluorescence spectroscopies. The results indicate that the optical absorption and fluorescence of natural melanin are enhanced within the near-UV and visible regimes with an increase in the solution concentration, are dependent on the pH level, and can impact the emergence of a broad band of visible absorption. The variations in the optical absorption spectra of natural melanin solutions at various pH levels will demonstrate novel rational strategies for controlling their optical properties for potential optoelectronic applications.

60 APPLIED LIFE SCIENCES↗

Reaction of benzylidenetriphenylphosphorane with 1,4-dichloro-3а,6а-diaza-1,4-diphosphapentalene

The transylidation between 1,4-dichloro-3a,6a-diaza-1,4-diphosphapentalene and benzylidenetriphenylphosphorane (Ph{sub 3}P=CHPh) results in either mono- or disubstitution of chlorine atoms by the Ph{sub 3}P=C(Ph) group depending on the reactant molar ratio. In the crystal, the monosubstituted product has the planar diazadiphosphapentalene ring and the P—Cl ionic bond. The {sup 31}P NMR spectra of this compound exhibit a strong solvent-dependent behavior, which indicates that it exists both in the ionic form (in CH{sub 2}Cl{sub 2}, MeCN) and the molecular form (in THF). In the disubstituted product, the diazadiphosphapentalene skeleton is non-planar and is bent along the N—N bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Disperse aqueous systems based on (S)-lysine in a wide range of concentrations and physiologically important temperatures

It was shown for the first time using a complex of physicochemical methods (dynamic and electrophoretic light scattering, nanoparticle tracking analysis, transmission electron and atomic force microscopy, conductometry, pH-metry) that in a temperature range of 25—60 °С (S)-lysine aqueous solutions (1•10{sup –17}—1•10{sup –2} mol L{sup –1}) are disperse systems, where the nature and parameters of the disperse phase change with dilution, which affects the nonmonotonic dependences of the specific conductivity and pH of the system. Nanoassociates hundreds of nanometers in size were found to contain ordered water structures that are responsible for the size and ζ-potential of the disperse phase in the aqueous systems and also participate in the formation of spatially organized systems on the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective conversion of methane to aromatic hydrocarbons on large crystallite zeolite catalysts with mesoporous structure

Large crystallite mesoporous MFI (ZSM-5) zeolite was synthesized by using carbon nano-powder as a secondary template. The surface properties, morphological and phase composition of the synthesized material and of the commercial ZSM-5 (Zeolyst) zeolite were studied by nitrogen porosimetry, XRD and scanning electron microscopy. The results showed that the volume of mesopores volume increases with development of a secondary mesoporosity in the structure of zeolite. The obtained zeolite supports were used to prepare molybdenum-containing catalysts for the methane aromatization by solid phase preparation technique. Based on the XPS data, molybdenum particles in these catalysts are characterized by more uniform size distribution. The formation of a secondary pore structure restrains the carbon deposit formation as well as increases the methane conversion and the yield of the aromatic compounds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Control of the properties of catalysts for methane aromatization by synthesizing ZSM-5 zeolites with different crystallite sizes

MFI zeolite materials (ZSM-5) with crystal sizes in the range from 0.10 to 1.70 μm have been synthesized. Acidic and surface properties, phase and morphological composition of the prepared zeolites have been studied by the IR sprectroscopy, nitrogen porosimetry, XRD, and scanning electron microscopy. Increasing crystal size was shown to decrease the general acidity of the zeolite. Synthesized zeolites served as supports for molybden-containing catalysts for methane aromatization prepared by using the solid phase synthesis approach. Diffuse reflectance IR spectroscopy, thermoprogrammed desoption of ammonia and {sup 27}Al NMR spectroscopy were used to characterize the physicochemical properties of the catalysts. An increase in the crystallite size of the zeolite favors a decrease in the acidity of the catalysts and inhibits the formation of alumina molybdate during the catalyst preparation. As a result, a tendency to coke formation is suppressed and the performance of the catalysts in methane aromatization improved: methane conversion and aromatic hydrocarbon yield increase.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Heteronuclear complexation in the system 1-hydroxyethylidenediphosphonic acid—manganese(II)—gadolinium(III) in aqueous solution

pH-Potentiometric method in combination with mathematical modeling was used to study the system manganese(II)—gadolinium(III)—1-hydroxyethylidenediphosphonic acid (HEDP, H{sub 4}L). When both cations simultaneously are present in the solution, the accumulation of heteronuclear forms with the ratio of Gd: Mn: HEDP equal to 1: 1: 1, 1: 1: 2, and 1: 1: 3 was observed already in the strongly acidic pH region, while from homonuclear forms only five complexes were detected in the solution, namely, MnL{sub 2}{sup 6–}, GdH{sub 4}L{sub 2}{sup –}, GdH{sub 2}L{sup +}, KGd{sub 2}HL{sub 2}↓, and K{sub 3}Gd{sub 2}L{sub 2}(OH)↓. It was concluded that heteronuclear complexes are much stronger and replace homonuclear forms in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanosized low-temperature phases of titanium(IV) oxide with anatase and η-phase structures: composition, structure, and photocatalytic properties

Nanosized low-temperature modifications of titanium(IV) oxide with the anatase and η-phase (TiO{sub 2–x}•mH{sub 2}O) structures were prepared by the sulfate method (pH <3) and for the first time characterized by a complex of methods (X-ray diffractometry, scanning electron microscopy, IR spectroscopy, Raman spectroscopy, differential scanning calorimetry, low-temperature sorption capacity of samples to nitrogen, and differentiating dissolution). The physicochemical properties of the modifications were compared. Differences in compositions of the surface and volumes of the samples, compositions and structures of the phases (structure of η-phase is superstructure to anatase), and microstructure elements (sizes of crystallites, nanoparticles, and specific surface area; volume of nano- and ultrananopores) were revealed. The region of η-phase stability was found in the coordinates of temperature (T = 50–95 °C) and hydrolysis duration (τ = 10–80 min) and temperature (T≤200 °C) and annealing duration (τ <6 h). The distinctions in the thermal behavior of the nanosized anatase and η-phase were studied. The photocatalytic activity (PCA) is determined by the physicochemical characteristics of the samples and phases and also by the composition and structure of the decomposed substrate. In the case of difenoxazole, the PCA is affected by the compositions of the samples, phases, and surface (the presence of OH groups) and specific surface area, whereas the composition of the samples and specific surface area affect the PCA in the case of thiamethoxam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantum chemical studies of azoles 13. Specific solvation effect on the calculated energetic parameters of the electrophilic substitution mechanism in thiazole via elimination–addition schemes

Energetic characteristics of electrophilic substitution reactions (hydroxonium ion as a model electrophile) in thiazole via the elimination–addition schemes in a wide range of pH of the medium were revealed on the basis of the results of analysis of quantum chemical calculations performed using the DFT/B3LYP/6-31G(d) and DFT/B3LYP/6-31{sup ++}G(d,p) methods taking into account specific solvation effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactions of the N-isopropyl-α-chloroketimines with P{sup IV} dithioacids

A primary iminium salt formed in the reaction of P{sup IV} dithioacids with N-isopropyl-α-chloroketimines is transformed into products of nucleophilic substitution of the chlorine atom by dithiophosphorus group (S{sub N} pathway), if the imine carbon atom is bonded to the donor and small-volume methyl group, or undergoes reduction of the CCl bond (C-Cl→C-H) (Red pathway), when it is bonded with the bulky acceptor phenyl group. The same effect of substituents was discovered, when replacing methyl group with phenyl one in the position 2 of N-tert-butyl-2-chloraldimines: S{sub N}: Red ratio is 1: 0 in the case of Me and 1: 9 in the case of Ph. The iminium salts were transformed into new type ketones containing a phosphor functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and structure of new anionic five-coordinate silicon complexes derived from α-hydroxy acids and 1-methylpiperazine-2,5-dione

Anionic five-coordinate complexes with two bis-O,O’-chelating ligands bearing α-hydroxy acid moieties, dicyclohexylammonium salts Cy{sub 2}NH{sub 2}{sup +}{PpnCH_2Si[OCR_2C(O)O]_2}{sup −} (Cy is cyclohexyl, PpnCH{sub 2} is 4-methyl-2,5-dioxopiperazin-1-ylmethyl, R = Me, Ph), were synthesized by esterification of alkoxysilane PpnCH{sub 2}Si(OMe){sub 3} with α-hydroxy acids (dimethyl- and diphenylgylcolic acids) in the presence of dicyclohexylamine. The five-coordinated state of the silicon atom in the resulting compounds in solution was confirmed by {sup 29}Si NMR spectroscopy. According to the X-ray diffraction data, the synthesized compounds contain the SiCO{sub 4} coordination unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An evaluation of Pt sulfite acid (PSA) as precursor for supported Pt catalysts

As a catalyst precursor, platinum sulfite acid (PSA) is easy to use and not relatively expensive, and is a potentially attractive precursor for many types of supported catalysts. The ultimate usefulness for many catalyst applications will depend on the extent that Pt can be dispersed and sulfur eliminated. To our knowledge, there exists no detailed characterization in the catalysis literature of PSA and the nanoparticulate Pt phases derived from it during catalyst pretreatment. To this end a series of supports including alumina, silica, magnesia, niobia, titania, magnesia and carbon were contacted with PSA solutions and subsequently analyzed with extended x-ray absorption fine structure (EXAFS) and x-ray absorption near edge structure (XANES) analysis, and x-ray photoelectron spectroscopy (XPS) to characterize the Pt species formed upon impregnation, calcination, and reduction. While all catalysts show retention of some S, reasonably small particle sizes with relatively little Pt-S can in some instances be produced using PSA. The amount of retained sulfur appears to decrease with decreasing surface acidity, although even the most acidic supports (niobia and silica) display some storage of S even while only Pt-O bands are observed after calcination or reoxidation. More sulfur was eliminated by high temperature calcinations followed by reduction in hydrogen, at the expense of increasing Pt particle size.

08 HYDROGEN↗

Speciation in the Fe(III)-Cl(I)-H 2 O System at 298.15 K, 313.15 K, and 333.15 K (25 °C, 40 °C, and 60 °C)

This article presents the results on speciation of ferric iron generated by the dissolution of chemical reagent hydromolysite (ferric chloride hexahydrate, FeCl 3 :6H 2 O) in water at 298.15 K, 313.15 K, and 333.15 K (25 °C, 40 °C, and 60 °C). Experiments were performed with a thermoregulated system up to the equilibrium point, as manifested by solution pH. Solution samples were analyzed in terms of concentration, pH, and electrical conductivity. Measurements of density and refractive index were obtained at different temperatures and iron concentrations. A decrease of pH was observed with the increase in the amount of dissolved iron, indicating that ferric chloride is a strong electrolyte that reacts readily with water. Experimental results were modeled using the hydrogeochemical code PHREEQC in order to obtain solution speciation. Cations and neutral and anion complexes were simultaneously present in the system at the studied conditions according to model simulations, where dominant species included Cl - , FeCl 2+ , FeCl 2 + , FeOHCl 2 0 , and H + . A decrease in the concentration of Cl - and Fe 3+ ions took place with increasing temperature due to the association of Fe-Cl species. Standard equilibrium constants for the formation of FeOHCl 2 0 obtained in this study were log K f 0 = -0.8 ± 0.01 at 298.15 K (25 °C), -0.94 ± 0.02 at 313.15 K (40 °C), and -1.03 ± 0.01 at 333.15 K (60 °C).

36 MATERIALS SCIENCE↗

Effect of Addition of Other Acids into Butyric Acid on Selective Leaching of Zinc from Basic Oxygen Steelmaking Filter Cake

The selective leaching of zinc over iron from basic oxygen steelmaking (BOS) filter cake was investigated using mixtures of butyric acid with acetic and/or propionic acid, HCl, or H{sub 2}SO{sub 4}. The main focus was to assess the effects of other acids on the zinc and iron leaching in butyric acid. The results show that slight reduction of zinc leaching and increase in iron leaching may take place with addition of acetic and propionic acids, causing a minor decrease in the selectivity of zinc leaching over iron. Intermittent addition of H{sub 2}SO{sub 4} and HCl was required to control the pH to be not less than that of pure butyric acid solution. Overall, an excellent selectivity can be maintained with the butyric acid–other acid mixtures. The results demonstrate the feasibility to use raw butyric acid without purification or waste butyric acid containing other impurity acids for leaching of zinc from the BOS filter cake to be recycled. Using high content of H{sub 2}SO{sub 4} in leaching is not recommended because it has a more detrimental effect on the selectivity of zinc leaching and may cause deposition of CaSO{sub 4} in the leaching residue which may increase the SO{sub 2} or CO{sub 2} emission in later high-temperature recycling processes.

36 MATERIALS SCIENCE↗

Introducing the Planar Laser-Induced Fluorescence Technique (PLIF) to Measure Mixing Time in Gas-Stirred Ladles

The planar laser-induced fluorescence (PLIF) technique was implemented to measure mixing time in a 1/17 water model of a 200-ton ladle furnace. The results were compared to those obtained using the conventional method of pH probes. PLIF determinations were done at two different planes, and pH probe determinations were performed at two different locations. The results suggest that mixing times measured by PLIF are similar to those obtained under optimal conditions by the pH probe and that PLIF technique is more accurate and less sensitive to the location of the measurement than the pH probe method. In addition, the particle image velocimetry (PIV) technique was used to measure the effect of the immersed probe on the fluid-dynamic structure of the system. The presence of the probe affects greatly fluid dynamics and consequently the mixing behavior, which could explain the differences found in its mixing time measurements at different probe locations. This study shows the feasibility of the PLIF technique used to measure mixing time in physical models of gas-stirred ladles; it is not intrusive and allows the visualization of the mixing phenomena in a complete plane of the system.

36 MATERIALS SCIENCE↗