Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical resonators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Dynamical Studies of Saturn's Rings

The data returned by the Voyager on the Saturnian system has revealed the structure of Saturn's ring system to be dominated by many abrupt transitions in optical depth, narrow well-defined ringlets and gaps, and spiral density and bending waves. A handful of these features were attributed with reasonable certainty to the resonant influence of external satellites, but the vast majority of the structure remains unexplained. The entire C ring was studied with particular emphasis on the search for unrecognized eccentric or inclined features, and the role, if any, played by satellite resonances in controlling C ring structure.

Nicholson, P. D.↗
NASA NTRS1994

Modeling the double-trough structure observed in broad absorption line QSOs using radiative acceleration

We present a model explaining the double trough, separated by delta v approximately = 5900 km/s, observed in the C IV lambda-1549 broad absorption line (BAL) in a number of BALQSOs. The model is based on radiative acceleration of the BAL outflow, and the troughs result from modulations in the radiative force. Specifically, where the strong flux from the Lyman-alpha lambda-1215 broad emission line is redshifted to the frequency of the N V lambda-1240 resonance line, in the rest frame of the accelerating N V ions, the acceleration increases and the absorption is reduced. At higher velocities the Lyman-alpha emission is redshifted out of the resonance and the N V ions experience a declining flux which causes the second absorption trough. A strongly nonlinear relationship between changes in the flux and the optical depth in the lines is shown to amplify the expected effect. This model produces double troughs for which the shallowest absorption between the two troughs occurs at v approximately = 5900 km/s. Indeed, we find that a substantial number of the observed objects show this feature. A prediction of the model is that all BALQSOs that show a double-trough signature will be found to have an intrinsic sharp drop in their spectra shortward of approximately 1200 A.

Arav, Nahum↗
NASA NTRS2002

Cometary Science After Hale-Bopp

Comets and the chondritic porous interplanetary dust particles (CP IDPs) that they shed in their comae are reservoirs of primitive solar nebula materials. The high porosity and fragility of cometary grains and CP IDPs, and anomalously high deuterium contents of pyroxene-rich CP IDPs imply these aggregate particles contain significant interstellar grain components. Spectrophotometry of comets at thermal IR wavelengths (3-40 microns) reveal the presence of a warm (near-IR) featureless emission modeled by amorphous carbon grains, and mid-IR and far-IR broad and narrow resonances modeled by chondritic (50% Fe and 50% Mg) amorphous and Mg-rich crystalline silicate minerals, respectively. Cometary amorphous silicate resonances are well matched by IR spectra of CP IDPs dominated by 0.1 micron spherules of Glass with Embedded Metal and Sulfides (GEMS) that are thought to be the interstellar Fe-bearing amorphous silicates produced in the cooling outflows of Asymptotic Giant Branch (AGB) stars. Acid-etched microtomed CP IDP samples, however, show that both the carbon phase (aliphatic) and the amorphous silicate phase (Mg-rich) are not optically absorbing while the embedded Fe nanoparticles make the IDPs dark. The CP IDPs suggest either significant processing has occurred in the ISM or that the AGB amorphous silicates have Mg-rich stoichiometry and possibly grew on Fe particle condensates. Cometary crystalline silicate resonances are well matched by IR spectra of laboratory submicron Mg-rich olivine crystals, [Mg(sub y),Fe(sub 1-y)]2SiO4 with y/ge0.85, and in the case of Hale-Bopp at r(sub h) less than or equal to approx. 1.5 AU, by Mg-rich pyroxene crystals, [Mg(sub x),Fe(sub 1-x)]SiO3 with x/ge0.85. While a fraction of AGB stardust (less than or equal to 15%) are Mg-rich crystals, this interstellar star dust component is insufficient to account for the deduced abundance of crystalline minerals in comet dust. An insufficient source of ISM Mg-rich crystals leads to the inference that Mg-rich crystals in comets may be hot, early solar nebula condensates that traveled large radial distances out to the comet-forming zone.

Wooden, Diane H.↗
NASA NTRS1994

Laboratory comparisons of acoustic and optical sensors for microbubble measurement

This paper presents the results of a recent comparison between three microbubble size spectrum measurement systems. These systems are the light-scattering bubble counter, the photographic bubble-imaging system, and the acoustic resonator array. Good agreement was formed among these three systems over the bubble size range appropriate for each system.

Su, Ming Yang↗
NASA NTRS1998

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses that may not be important in longer wavelength designs. This paper describes the design of multi- bandwidth filters operating in the 1-5 micrometer wavelength range. This work follows on a previous design. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using microlithographic techniques and used in spectral imaging applications will be presented.

Cwik, Tom↗
NASA NTRS1999

Multi-Bandwidth Frequency Selective Surfaces for Near Infrared Filtering: Design and Optimization

Frequency selective surfaces are widely used in the microwave and millimeter wave regions of the spectrum for filtering signals. They are used in telecommunication systems for multi-frequency operation or in instrument detectors for spectroscopy. The frequency selective surface operation depends on a periodic array of elements resonating at prescribed wavelengths producing a filter response. The size of the elements is on the order of half the electrical wavelength, and the array period is typically less than a wavelength for efficient operation. When operating in the optical region, diffraction gratings are used for filtering. In this regime the period of the grating may be several wavelengths producing multiple orders of light in reflection or transmission. In regions between these bands (specifically in the infrared band) frequency selective filters consisting of patterned metal layers fabricated using electron beam lithography are beginning to be developed. The operation is completely analogous to surfaces made in the microwave and millimeter wave region except for the choice of materials used and the fabrication process. In addition, the lithography process allows an arbitrary distribution of patterns corresponding to resonances at various wavelengths to be produced. The design of sub-millimeter filters follows the design methods used in the microwave region. Exacting modal matching, integral equation or finite element methods can be used for design. A major difference though is the introduction of material parameters and thicknesses tha_ may not be important in longer wavelength designs. This paper describes the design of multi-bandwidth filters operating in the I-5 micrometer wavelength range. This work follows on previous design [1,2]. In this paper extensions based on further optimization and an examination of the specific shape of the element in the periodic cell will be reported. Results from the design, manufacture and test of linear wedge filters built using micro-lithographic techniques and used ir spectral imaging applications will be presented.

Cwik, Tom↗
NASA NTRS1974

Relative coronal abundances derived from X-ray observations 3: The effect of cascades on the relative intensity of Fe (XVII) line fluxes, and a revised iron abundance

Permitted lines in the optically thin coronal X-ray spectrum were analyzed to find the distribution of coronal material, as a function of temperature, without special assumptions concerning coronal conditions. The resonance lines of N, O, Ne, Na, Mg, Al, Si, S, and Ar which dominate the quiet coronal spectrum below 25A were observed. Coronal models were constructed and the relative abundances of these elements were determined. The intensity in the lines of the 2p-3d transitions near 15A was used in conjunction with these coronal models, with the assumption of coronal excitation, to determine the Fe XVII abundance. The relative intensities of the 2p-3d Fe XVII lines observed in the corona agreed with theoretical prediction. Using a more complete theoretical model, and higher resolution observations, a revised calculation of iron abundance relative to hydrogen of 0.000026 was made.

Walker, A. B. C., Jr.↗
NASA NTRS1975

A possible width-luminosity correlation of the Ca II K1 and Mg II k1 features

Existing high resolution stellar profiles of the Ca II and Mg II resonance lines suggest a possible width-luminosity correlation of the K1 minimum features. It is shown that such a correlation can be simply understood if the continuum optical depth of the stellar temperature minimum is relatively independent of surface gravity as suggested by three stars studied in detail.

Ayres, T. R.↗
NASA NTRS1979

EUV limb spectra of a surge observed from Skylab

The EUV spectra of a surge observed at plus 8 in. and plus 20 in. above the white light limb from Skylab are examined. The shape of the differential emission measure determined at 8 in. and 20 in. is nearly the same as for a quiet Sun spectrum at 8 in., but the emission measure of the surge at 8 in. is about an order of magnitude greater than for the quiet Sun. At 20 in. the emission measure of the surge is initially close to the quiet Sun distribution, but decreases by a factor of 4 within 6 min. The optically thin lines formed near 10 to the 5th power K show nonthermal broadening at 8 in., and electron densities near this temperature are derived from intersystem to resonance ratios. The volume of the emitting plasma at 8 in. above the limb was determined, concluding that a continuous energy input is required to explain the observations.

Doschek, G. A.↗
NASA NTRS1980

Mass loss from O-type stars

We determine mass loss rates for six O-type stars from the violet-shifted absorption profile of the resonance C IV and N V lines, using the IUE satellite and the high-resolution camera. The values are substantially below those of Of stars (which have optical emission lines) of similar luminosity.

Conti, P. S.↗
NASA NTRS1983

Simultaneous observation of rotational coherent Stokes Raman scattering and coherent anti-Stokes Raman scattering in air and nitrogen

Rotational coherent Stokes Raman scattering (CSRS) and coherent anti-Stokes Raman scattering (CARS) in air and in nitrogen were observed simultaneously by using broadband generation and detection. In the broadband technique used, the entire CARS and CSRS spectrum was generated in a single laser pulse; the CSRS and CARS signals were dispersed by a spectrograph and detected simultaneously by an optical multichannel analyzer. A three-dimensional phase-matching geometry was used to achieve spatial resolution of the CSRS and CARS beams from the input beams. Under resonant conditions, similar experiments may provide a means of investigating the possible interaction between the CSRS and CARS processes in driving the rotational levels.

Snow, J. B.↗
NASA NTRS1984

Optical stark effect in the 2-photon spectrum of NO

A large optical Stark effect has been observed in the two-photon spectrum X(2)Pi yields A(2)Sigma(+)_ in NO. It is explained as a near-resonant process in which the upper state of the two-photon transition is perturbed by interactions with higher-lying electronic states coupled by the laser field. A theoretical analysis is presented along with coupling parameters determined from ab initio wave functions. The synthetic spectrum reproduces the major experimental features.

Huo, W. M.↗
NASA NTRS1985

Optical Stark effect in the two-photon spectrum of NO

A large optical Stark effect has been observed in the two-photon spectrum X(2)Pi yields A(2)Sigma(+) - in NO. It is explained as a near-resonant process in which the upper state of the two-photon transition is perturbed by interactions with higher-lying electronic states coupled by the laser field. A theoretical analysis is presented along with coupling parameters determined from ab initio wave functions. The synthetic spectrum reproduces the major experimental features.

Huo, W. M.↗
NASA NTRS1993

Long-pulse-length 2-micron diode-pumped YLiF4 laser

A diode-pumped Ho:Tm:YLiF4 laser at room temperature has achieved an optical efficiency of 5.9 percent under normal-mode operation. Long pulse lengths, of the order of 1 microsec, have been obtained by use of 4-m ring resonator, with laser energy output of 15 mJ in single Q-switched pulses for an input energy of 2.078 J.

Jani, Mahendra G.↗
NASA NTRS1994

The composition of a coronal active region

The relative abundances of iron, oxygen, magnesium, and neon in a coronal active region are determined from measurements of soft X-ray line and broadband intensities. The emission measure, temperature, and column density are derived from these measured intensities and are used to place a constraint on the abundances of the heavier elements relative to hydrogen in the corona. The intensity measurements were made on 1987 December 11, when an active region was observed jointly by the American Science and Engineering (AS&E) High Resolution Soft X-Ray Imaging Sounding-Rocket Payload and the X-Ray Polychromator Flat Crystal Spectrometer (FCS) onboard the Solar Maximum Mission spacecraft. The coordinated observations include images through two broadband filters (8 to 29 A and 8 to 39, 44 to 60 A) and profiles of six emission lines: Fe XVII (15.01 A), FE VIII (15.26 A), O VIII (18.97 A), Mg XI (9.17 A), Ne IX (13.44 A), and Fe XVIII (14.21 A). The effects of resonance scattering are considered in the interpretation of the FCS line intensities. We calculated the expected intensity ratio of the two Fe XVII lines as a function of optical depth and compared this ratio with the observed intensity ratio to obtain the optical depths of each of the lines and the column density. The line intensities and the broadband filtered images are consistent with the emission from a thermal plasma where Fe, O, Mg, and Ne have the 'adopted coronal' abundances of Meyer (1985b) relative to one another, but are not consistent with the emission from a plasma having photospheric abundances: The ratios of the abundances of the low first ionization potential (FIP) elements (Fe and Mg) to the abundances of the high-FIP elements (Ne and O) are higher than the ratios seen in the photosphere by a factor of about 3.5. This conclusion is independent of the assumption of either an isothermal or a multithermal plasma. The column densities derived from the Fe XVII line ratio and the geometry of the active region provide a diagnostic of the abundance of hydrogen relative to the heavier elements. We find that the abundance of iron with respect to hydrogen in the corona is higher than the value given Meyer (1985b) by a factor of 8.2(-5.4, +5.1). This means that, for the observed active region, the absolute abundances of the low-FIP elements (Fe and Mg) are enhanced in the corona relative to the photosphere, while the abundances of the high-FIP elements (Ne and O) are either slightly enhanced in the corona or nearly the same in the photosphere and the corona.

Waljeski, K.↗
NASA NTRS2004

A Micromachined Geometric Moire Interferometric Floating-Element Shear Stress Sensor

This paper presents the development of a floating-element shear stress sensor that permits the direct measurement of skin friction based on geometric Moir interferometry. The sensor was fabricated using an aligned wafer-bond/thin-back process producing optical gratings on the backside of a floating element and on the top surface of the support wafer. Experimental characterization indicates a static sensitivity of 0.26 microns/Pa, a resonant frequency of 1.7 kHz, and a noise floor of 6.2 mPa/(square root)Hz.

Horowitz, S.↗
NASA NTRS2004

A Wafer-Bonded, Floating Element Shear-Stress Sensor Using a Geometric Moire Optical Transduction Technique

This paper presents a geometric Moir optical-based floating-element shear stress sensor for wind tunnel turbulence measurements. The sensor was fabricated using an aligned wafer-bond/thin-back process producing optical gratings on the backside of a floating element and on the top surface of the support wafer. Measured results indicate a static sensitivity of 0.26 microns/Pa, a resonant frequency of 1.7 kHz, and a noise floor of 6.2 mPa/(square root)Hz.

Horowitz, Stephen↗
NASA NTRS2005

NASA Tech Briefs, January 2005

Topics covered include: Fiber-Optic Sensor Would Monitor Growth of Polymer Film; Sensors for Pointing Moving Instruments Toward Each Other; Pd/CeO2/SiC Chemical Sensors; Microparticle Flow Sensor; Scattering-Type Surface-Plasmon-Resonance Biosensors; Diode-Laser-Based Spectrometer for Sensing Gases; Improved Cathode Structure for a Direct Methanol Fuel Cell; X-Band, 17-Watt Solid-State Power Amplifier; Improved Anode for a Direct Methanol Fuel Cell; Tools for Designing and Analyzing Structures; Interactive Display of Scenes with Annotations; Solving Common Mathematical Problems; Tools for Basic Statistical Analysis; Program Calculates Forces in Bolted Structural Joints; Integrated Structural Analysis and Test Program; Molybdate Coatings for Protecting Aluminum Against Corrosion; Synthesizing Diamond from Liquid Feedstock; Modifying Silicates for Better Dispersion in Nanocomposites; Powder-Collection System for Ultrasonic/Sonic Drill/Corer; Semiautomated, Reproducible Batch Processing of Soy; Hydrogen Peroxide Enhances Removal of NOx from Flue Gases; Subsurface Ice Probe; Real-Time Simulation of Aeroheating of the Hyper-X Airplane; Using Laser-Induced Incandescence To Measure Soot in Exhaust; Method of Real-Time Principal-Component Analysis; Insect-Inspired Flight Control for Unmanned Aerial Vehicles; Domain Compilation for Embedded Real-Time Planning; Semantic Metrics for Analysis of Software; Simulation of Laser Cooling and Trapping in Engineering Applications; Large Fluvial Fans and Exploration for Hydrocarbons; Doping-Induced Interband Gain in InAs/AlSb Quantum Wells; Development of Software for a Lidar-Altimeter Processor; Upgrading the Space Shuttle Caution and Warning System; and Fractal Reference Signals in Pulse-Width Modulation.

Source record↗