Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Effect of Misorientation and Preliminary Etching of the Substrate on the Structural and Optical Properties of Integrated GaAs/Si(100) Heterostructures Produced by Vapor Phase Epitaxy

It is shown for the first time that the structural and optical functional characteristics of integrated GaAs/Si(100) heterostructures can be controlled by using misoriented Si(100) substrates and their preliminary etching. The growth of an epitaxial GaAs layer on a Si substrate without the formation of antiphase domains can be carried out on a substrate deviated from the (100) singular plane by an angle smaller than 4°–6° or without a transition layer of GaAs nanocolumns. Preliminary treatment of the silicon substrate by etching makes it possible to use it for the vapor-phase epitaxial growth of a single-crystal GaAs film with a considerably smaller relaxation coefficient, which has a positive effect on the structural quality of the film. These data are in good agreement with the results of IR reflectance spectroscopy and photoluminescence and ultraviolet spectroscopy. The features of the optical properties of integrated GaAs/Si(100) heterostructures in the infrared and ultraviolet spectral regions are also defined by the relaxation coefficient.

36 MATERIALS SCIENCE↗

Optical Property Enhancement and Durability Evaluation of Heat Receiver Aperture Shield Materials

Under the Solar Dynamic Flight Demonstration (SDFD) program, NASA Lewis Research Center worked with AlliedSignal Aerospace, the heat receiver contractor, on the development, characterization and durability testing of refractory metals to obtain appropriate optical and thermal properties for the SDFD heat receiver aperture shield. Molybdenum and tungsten foils were grit-blasted using silicon carbide or alumina grit under various grit-blasting conditions for optical property enhancement. Black rhenium coated tungsten foil was also evaluated. Tungsten, black rhenium-coated tungsten, and grit-blasted tungsten screens of various mesh sizes were placed over the pristine and grit-blasted foils for optical property characterization. Grit-blasting was found to be effective in decreasing the specular reflectance and the absorptance/emittance ratio of the refractory foils. The placement of a screen further enhanced these optical properties, with a grit-blasted screen over a grit-blasted foil producing the best results. Based on the optical property enhancement results, samples were tested for atomic oxygen and vacuum heat treatment durability. Grit-blasted (Al2O3 grit) 2 mil tungsten foil was chosen for the exterior layer of the SDFD heat receiver aperture shield. A 0.007 in. wire diameter, 20 x 20 mesh tungsten screen was chosen to cover the tungsten foil. Based on these test results, a heat receiver aperture shield test unit has been built with the screen covered grit-blast tungsten foil exterior layers. The aperture shield was tested and verified the thermal and structural durability of the outer foil layers during an off-pointing period.

deGroh, Kim K.↗

Influence of the surface ligand molecules length on the optical properties and photoconductivity of PbS quantum dot condensates

The influence of ligands—organic molecules on the quantum dot (QD) surface—on the optical properties of thin-layer condensates of lead sulfide QDs and the photoconductivity of diode structures based on them has been investigated. A decrease in the ligand length by a factor of 4 is shown to reduce significantly the luminescence-decay time and increase exponentially the conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Comparison of the structural and optical properties of porous In{sub 0.08}Ga{sub 0.92}N thin films synthesized by electrochemical etching

This paper presents the structural and optical study of porous (1 µm) In{sub 0.08}Ga{sub 0.92}N synthesized by photoelectrochemical etching under various conditions. Field emission scanning electron microscope and atomic force microscope images showed that the pre-etched thin films have a sufficiently smooth surface over a large region with wurtzite structure. The roughness increased with an increase in etching duration. The blue shift phenomenon was measured for photoluminescence emission peaks at 300 K. The energy band gap increased to be 3.18 and 3.16 eV for post-etched films at ratios of 1:4 and 1:5, respectively. At the same time, the photoluminescence intensities of the post-etched thin films indicated that the optical properties have been enhanced. - Graphical abstract: PL spectra of the as-grown and porous In{sub 0.08}Ga{sub 0.92}N under various etching duration. - Highlights: • Nanoporous structures of In{sub 0.08}Ga{sub 0.92}N. • The roughness of the porous thin films increased with an increase in etching durations. • No phase segregation in XRD pattern. • Blue shifts were observed in the PL spectra of the post-etched films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Specific features of diffuse photon migration in highly scattering media with optical properties of biological tissues

Specific features of motion of photon density normalised maximum (PDNM) of pulsed radiation in highly scattering media with optical properties of biological tissues are described. A numerical simulation has confirmed that, when the object is a homogeneous cylinder, PDNM always moves to its geometric centre. In the presence of an absorbing inhomogeneity, PDNM moves towards the point symmetric to the geometric centre of the inhomogeneity with respect to the centre of the cylindrical object. In the presence of a scattering inhomogeneity, PDNM moves towards its geometric centre. (radiation scattering)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the variations of optical property and electronic structure in heavily Al-doped ZnO films during double-step growth process

We have investigated the variations of optical property and electronic structure in heavily Al-doped ZnO (AZO) films during the growth process, which were formed by first creating Zn vacancies in O{sub 2}-rich atmosphere and second filling the vacancies with Zn atoms in Zn-vapor atmosphere. After the first step, the high-resistance AZO films have the same optical bandgap with nominally undoped ZnO, indicating that negligible variations in the fundamental bandgap happened to the AZO films although Al atom was incorporated into the ZnO lattice. After the second step, once free electrons were brought into the lattice by Zn-filling, the optical transition energy blueshifts due to the band-filling effect. X-ray absorption fine structure measurements suggest that Zn-filling process decreased the unoccupied states of the conduction band, but not raised the conduction band minimum.

36 MATERIALS SCIENCE↗

Effect of annealing temperature on the structural and optical properties of CeO{sub 2}:Ni thin films

High quality Ni-doped CeO{sub 2} (CeO{sub 2}:Ni) thin films were deposited on glass substrates at room temperature by using radio frequency magnetron sputtering. The effect of annealing temperature on structural and optical properties of the CeO{sub 2}:Ni films was investigated. The structural, optical and vibrational properties of the films were determined using X-ray diffraction (XRD), photoluminescence spectrometer (PL) and Raman spectrometer. It was found that the as-deposited film has a fluorite cubic structure. By increasing annealing temperature from 100°C to 300°C, the crystalline quality of the thin films could be improved. The UV and visible band emissions were observed in the photoluminescence spectra, due to exciton, defect related emissions respectively. The micro-Raman results show the characteristic peak of CeO{sub 2} F{sub 2g} at 465 cm{sup −1} and 2L0 at 1142 cm{sup −1}. Defect peaks like D and 0 bands were observed at 641 cm{sup −1} and 548 cm{sup −1} respectively. It is found from the spectra that the peak intensity of the films increased with increase of annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

OPTICAL PROPERTIES OF HOST GALAXIES OF EXTRAGALACTIC NUCLEAR WATER MASERS

We study the optical properties of the host galaxies of nuclear 22 GHz ({lambda} = 1.35 cm) water masers. To do so, we cross-match the galaxy sample surveyed for water maser emission (123 detections and 3806 non-detections) with the Sloan Digital Sky Survey (SDSS) low-redshift galaxy sample (z < 0.05). Out of 1636 galaxies with SDSS photometry, we identify 48 detections; out of the 1063 galaxies that also have SDSS spectroscopy, we identify 33 detections. We find that maser detection rate is higher at higher optical luminosity (M{sub B} ), larger velocity dispersion ({sigma}), and higher [O III] {lambda}5007 luminosity, with [O III] {lambda}5007 being the dominant factor. These detection rates are essentially the result of the correlations of isotropic maser luminosity with all three of these variables. These correlations are natural if maser strength increases with central black hole mass and the level of active galactic nucleus (AGN) activity. We also find that the detection rate is higher in galaxies with higher extinction. Based on these results, we propose that maser surveys seeking to efficiently find masers should rank AGN targets by extinction-corrected [O III] {lambda}5007 flux when available. This prioritization would improve maser detection efficiency, from an overall {approx}3% without pre-selection to {approx}16% for the strongest intrinsic [O III] {lambda}5007 emitters, by a factor of {approx}5.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of the tetrahedral groups on the optical properties of LaBRO{sub 5} (R = Si and Ge): A first-principles study

As potential candidates for deep-UV nonlinear optical (NLO) crystals, borosilicates and borogermanates, which contain NLO-active groups such as B-O, Si-O, and Ge-O groups, have fascinated many material scientists' research enthusiasm. In this paper, the electronic structures and optical properties of two isostructural noncentrosymmetric crystals LaBRO{sub 5} (R = Si and Ge) have been studied by the first-principles method. Combined with the analyses of the SHG-density and the localized electron-density difference, contributions of the constituent tetrahedra to the total NLO responses are investigated. Eventually, BO{sub 4} and GeO{sub 4} groups give nearly equal contributions to the SHG effect of LaBGeO{sub 5}, but for LaBSiO{sub 5}, SiO{sub 4} groups express stronger SHG response than that of BO{sub 4}. Such interesting conclusion is consistent with the distortion index analyses and dipole moment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Engineering of the band gap and optical properties of thin films of yttrium hydride

Thin films of oxygen-containing yttrium hydride show photochromic effect at room temperature. In this work, we have studied structural and optical properties of the films deposited at different deposition pressures, discovering the possibility of engineering the optical band gap by variation of the oxygen content. In sum, the transparency of the films and the wavelength range of photons triggering the photochromic effect can be controlled by variation of the deposition pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure and optical properties of cubic gallium oxynitride synthesized by solvothermal route

Cubic gallium oxynitride was synthesized using a solvothermal processing route. Crystal structure, chemical composition, optical properties and the influence of heat treatment in either reactive or inert atmospheres have been investigated. Despite a strongly distorted lattice revealed using X-ray diffraction, the Raman active modes of a cubic gallium oxynitride structure could be observed. With diffusive reflectance UV–Vis spectroscopy a band gap at around 4.8 eV has been observed. Additionally, cathodoluminescence spectroscopy exhibited observable luminescence caused by defect-related transitions within the optical gap. Cathodoluminescence and photoluminescence spectra collected after heat treatments showed significant changes in the defect structure. In particular, for annealing in ammonia the main spectral modifications were related to the substitution of oxygen by nitrogen on anion sites. - Graphical abstract: CL spectra of gallium oxynitride: As-prepared and heat-treated at temperatures of 500 °C in different atmospheres. Highlights: ► Raman spectrum of cubic gallium oxynitride. ► Experimental determination of optical band gap. ► Shift of band gap energy due to heat treatment. ► Nitrogen incorporation leads to deep level acceptor states. ► Red shifted luminescence spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and Optical Properties of Mg Doped GaNNanowires in Dependence of Growth Temperature

The influence of the substrate temperature and Mg doping on the morphological and optical properties of catalyst-free GaN nanowires grown by plasma-assisted molecular beam epitaxy on Si(111) has been investigated in a large temperaturerange between 665 &deg;C and 785 &deg;C. The density and wire sizes in Mg-doped nanowires are found to change with substrate temperature in a similar way as undoped nanowires. Between 725 &deg;C and 785 &deg;C a trimodal size distribution and an increase of the wire density from 5.0x109 cm-2 to 9.5x109 cm-2 were observed. Transmission electron microscopy indicates that the upper parts of the nanowires are free of structural defects. Raman spectroscopy measurements confirm a high crystalline quality of doped wires, with a line width of the E2 H of 3.3 cm-1 for samples grown at Ts=785 &deg;C. Photoluminescence measurements show a strong influence of Mg on the emission properties, namely the increase of thedonor-acceptor pair emission and its phonon replicas.

36 MATERIALS SCIENCE↗

Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn): High Chemical Flexibility Resulting in Good Nonlinear-Optical Properties

Seven acentric sulfides Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) were grown by a high-temperature salt flux method. The crystal structures of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds were determined by single-crystal X-ray diffraction with the aid of solid-state NMR spectroscopy. The Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds are isostructural and crystallize in the Ba 6 Ag 4 Sn 4 S 16 structure type. The Sn-containing compound exhibits high structural similarity to Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) with the presence of an interstitial atomic position partially occupied by Sn atoms. The chemical bonding characteristics of Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 were understood with electron localization function calculations coupled with crystal orbital Hamilton population calculations. The Ba–S and Cu–S interactions are dominantly ionic, but the Sn–S interactions consist of strong covalent bonding characteristics in Ba 6 (Cu 2.9 Sn 0.4 )Sn 4 S 16 . The monovalent Cu atoms, mixed with certain metals with various oxidation states, significantly shift the optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi) compounds. This results in a good balance between the second-harmonic-generation (SHG) response and laser damage threshold (LDT). Ba 6 (Cu 1.9 Zn 1.1 )Sn 4 S 16 possesses a high SHG response and a high LDT of 2.8 × AGS and 3 × AGS, respectively. Here, a density functional theory calculation revealed that CuS 4 and SnS 4 tetrahedra significantly contribute to the SHG response in Ba 6 (Cu 2 Mg)Sn 4 S 16 , which also confirmed that CuS 4 tetrahedra are crucial for the stability and optical properties of the Ba 6 (Cu x Z y )Sn 4 S 16 (Z = Mg, Mn, Zn, Cd, In, Bi, Sn) compounds revealed by electronic structure analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Full potential study of the elastic, electronic, and optical properties of spinels MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} under pressure effect

The structural, elastic, electronic, and optical properties of cubic spinel MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} compounds have been calculated using a full relativistic version of the full-potential linearized-augmented plane wave with the mixed basis FP/APW+lo method. The exchange and correlation potential is treated by the generalized-gradient approximation (GGA). Moreover, the Engel-Vosko GGA formalism is also applied to optimize the corresponding potential for band structure calculations. The ground state properties, including the lattice constants, the internal parameter, the bulk modulus, and the pressure derivative of the bulk modulus are in reasonable agreement with the available data. Using the total energy-strain technique, we have determined the full set of first-order elastic constants C{sub ij} and their pressure dependence, which have not been calculated or measured yet. The shear modulus, Young's modulus, and Poisson's ratio are calculated for polycrystalline XIn{sub 2}S{sub 4} aggregates. The Debye temperature is estimated from the average sound velocity. Electronic band structures show a direct band gap ({Gamma}-{Gamma}) for MgIn{sub 2}S{sub 4} and an indirect band gap (K-{Gamma}) for CdIn{sub 2}S{sub 4}. The calculated band gaps with EVGGA show a significant improvement over the GGA. The optical constants, including the dielectric function {epsilon}({omega}), the refractive index n({omega}), the reflectivity R({omega}), and the energy loss function L({omega}) were calculated for radiation up to 30 eV. -- Graphical abstract: Calculated total and partial densities of states for MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4}

36 MATERIALS SCIENCE↗

In-Situ Measurements of Aerosol Optical Properties using New Cavity Ring-Down and Photoacoustics Instruments and Comparison with more Traditional Techniques

Carbonaceous species (BC and OC) are responsible for most of the absorption associated with aerosol particles. The amount of radiant energy an aerosol absorbs has profound effects on climate and air quality. It is ironic that aerosol absorption coefficient is one of the most difficult aerosol properties to measure. A new cavity ring-down (CRD) instrument, called Cadenza (NASA-ARC), measures the aerosol extinction coefficient for 675 nm and 1550 nm light, and simultaneously measures the scattering coefficient at 675 nm. Absorption coefficient is obtained from the difference of measured extinction and scattering within the instrument. Aerosol absorption coefficient is also measured by a photoacoustic (PA) instrument (DRI) that was operated on an aircraft for the first time during the DOE Aerosol Intensive Operating Period (IOP). This paper will report on measurements made with this new instrument and other in-situ instruments during two field recent field studies. The first field study was an airborne cam;oaign, the DOE Aerosol Intensive Operating Period flown in May, 2003 over northern Oklahoma. One of the main purposes of the IOP was to assess our ability to measure extinction and absorption coefficient in situ. This paper compares measurements of these aerosol optical properties made by the CRD, PA, nephelometer, and Particle Soot Absorption Photometer (PSAP) aboard the CIRPAS Twin-Otter. During the IOP, several significant aerosol layers were sampled aloft. These layers are identified in the remote (AATS-14) as well as in situ measurements. Extinction profiles measured by Cadenza are compared to those derived from the Ames Airborne Tracking Sunphotometer (AATS-14, NASA-ARC). The regional radiative impact of these layers is assessed by using the measured aerosol optical properties in a radiative transfer model. The second study was conducted in the Caldecott Tunnel, a heavily-used tunnel located north of San Francisco, Ca. The aerosol sampled in this study was characterized by fresh automobile and diesel exhaust. Measurements from Cadenza and from an aethalometer are presented. The aethalometer is a filter-based photometer and the infrared channel is calibrated to produce a measure of BC mass loading.

Strawa, A. W.↗

Optical Properties and Electronic Characteristics of Cerium in the Condensed State

The results of investigating optical properties of metallic cerium in the liquid and solid fi lm state are presented. Optical constants were measured by the ellipsometric Beattie method in the range of 0.42–2.6 μm at ambient temperature. Based on the measured refractive indices and the absorption coefficients, spectra of light conductivity σ, reflectivity R, and characteristic loss function Im ε{sup –1} were calculated. Based on experimental measurements in the IR region, electronic characteristics of liquid cerium and its polycrystalline film and their correlation with electrical conductivity have been determined.

36 MATERIALS SCIENCE↗

Optofluidic phantom mimicking optical properties of porcine livers

One strategy for assessing efficacy of a liver transplant is to monitor perfusion and oxygenation after transplantation. An implantable optical sensor is being developed to overcome inadequacies of current monitoring approaches. To facilitate sensor design while minimizing animal use, a polydimethylsiloxane (PDMS)-based liver phantom was developed to mimic the optical properties of porcine liver in the 630-1000 nm wavelength range and the anatomical geometry of liver parenchyma. Using soft lithography to construct microfluidic channels in pigmented elastomer enabled the 2D approximation of hexagonal liver lobules with 15mm sinusoidal channels, which will allow perfusion with blood-mimicking fluids to facilitate the development of the liver perfusion and oxygenation monitoring system.

59 BASIC BIOLOGICAL SCIENCES↗

On the Morphology and Optical Properties of Molybdenum Disulfide Nanostructures from a Monomolecular Layer to a Fractal-Like Substructure

The impact of layer thickness on the morphology and optical properties of MoS{sub 2} nanostructures, including monomolecular layers, formed by the carrier-gas-assisted transport of sulfur vapor to the hot zone of a reactor containing metallic molybdenum and subsequent deposition on mica (muscovite) substrates is investigated. Molybdenum disulfide nanostructures of different thicknesses grown at different temperatures of gas-transport synthesis are studied by atomic-force microscopy, optical absorption spectroscopy, and Raman spectroscopy. It is found that synthesis at temperatures of 525–600°C makes it possible to obtain monomolecular MoS{sub 2} layers containing trigonal domains and featuring direct-gap optical transitions at 1.84 eV with the formation of excitons at room temperature. Fractal-type MoS{sub 2} substructures are obtained for the first time. The frequencies of intralayer and interlayer vibrational modes E{sub 2g}{sup 1} and A{sub 1g}, respectively, in their Raman spectra (377.5 and 403.8 cm{sup –1}, respectively) differ both from the corresponding values for a monomolecular layer and the known frequencies for bulk samples. The frequency of the E{sub 2g}{sup 1} intralayer mode in these samples (377.5 cm{sup –1}) is the lowest of all previously reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗