Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Offshore”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

FAST Model Calibration and Validation of the OC5-DeepCwind Floating Offshore Wind System Against Wave Tank Test Data

During the course of the Offshore Code Comparison Collaboration, Continued, with Correlation (OC5) project, which focused on the validation of numerical methods through comparison against tank test data, the authors created a numerical FAST model of the 1:50-scale DeepCwind semisubmersible system that was tested at the Maritime Research Institute Netherlands ocean basin in 2013. This paper discusses several model calibration studies that were conducted to identify model adjustments that improve the agreement between the numerical simulations and the experimental test data. These calibration studies cover wind-field-specific parameters (coherence, turbulence), hydrodynamic and aerodynamic modeling approaches, as well as rotor model (blade-pitch and blade-mass imbalances) and tower model (structural tower damping coefficient) adjustments. These calibration studies were conducted based on relatively simple calibration load cases (wave only/wind only). The agreement between the final FAST model and experimental measurements is then assessed based on more-complex combined wind and wave validation cases.

17 WIND ENERGY↗

American-Made Challenges: FLoating Offshore Wind ReadINess (FLOWIN) Prize

The goal of this prize is to establish a pathway to cost-effective domestic manufacture and deployment of gigawatt-scale floating wind farms in U.S. waters. Toward realization of that goal, the prize will: (1) incentivize and support further development of technically and economically viable floating wind platform structures that can support 12-MW-rated or larger wind turbines in water depths over 40 meters. (2) incentivize the creation of a supply chain that will enable domestic on-site manufacturing of floating offshore wind farm components utilizing a skilled and trained workforce. (3) promote awareness of the importance and principles of inclusion and environmental justice.

American-Made Challenges↗

From Subsurface to System: Offshore CCS Development for the Northeastern U.S. Atlantic Shelf

This study evaluated offshore carbon sequestration potential and infrastructure design along the mid-north Atlantic outer continental shelf, addressing the limited onshore storage options in the northeastern U.S. The objective was to define viable CCS pathways by integrating geological characterization, reservoir modeling, and system-level engineering for decarbonizing regional industrial sources. The work was conducted under US DOE grant FE0032407 for the Regional Initiatives and builds on a previous prospective resources assessment project by Battelle.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Observed drag coefficients in high winds in the near offshore of the South China Sea

This paper investigates the relationships between friction velocity, 10 m drag coefficient, and 10 m wind speed using data collected at two offshore observation towers (one over the sea and the other on an island) from seven typhoon episodes in the South China Sea from 2008 to 2014. The two towers were placed in areas with different water depths along a shore-normal line. The depth of water at the tower over the sea averages about 15 m, and the depth of water near the island is about 10 m. The observed maximum 10 min average wind speed at a height of 10 m is about 32 m s⁻¹. Momentum fluxes derived from three methods (eddy covariance, inertial dissipation, and flux profile) are compared. The momentum fluxes derived from the flux profile method are larger (smaller) over the sea (on the island) than those from the other two methods. The relationship between the 10 m drag coefficient and the 10 m wind speed is examined by use of the data obtained by the eddy covariance method. The drag coefficient first decreases with increasing 10 m wind speed when the wind speeds are 5–10 m s⁻¹, then increases and reaches a peak value of 0.002 around a wind speed of 18 m s⁻¹. The drag coefficient decreases with increasing 10 m wind speed when 10 m wind speeds are 18–27 m s⁻¹. A comparison of the measurements from the two towers shows that the 10 m drag coefficient from the tower in 10 m water depth is about 40% larger than that from the tower in 15 m water depth when the 10 m wind speed is less than 10 m s⁻¹. Above this, the difference in the 10 m drag coefficients of the two towers disappears.

54 ENVIRONMENTAL SCIENCES↗

High-Throughput Computation and the Applicability of Monte Carlo Integration in Fatigue Load Estimation of Floating Offshore Wind Turbines

Long-term fatigue loads for floating offshore wind turbines are hard to estimate because they require the evaluation of the integral of a highly nonlinear function over a wide variety of wind and wave conditions. Current design standards involve scanning over a uniform rectangular grid of metocean inputs (e.g., wind speed and direction and wave height and period), which becomes intractable in high dimensions as the number of required evaluations grows exponentially with dimension. Monte Carlo integration offers a potentially efficient alternative because it has theoretical convergence proportional to the inverse of the square root of the number of samples, which is independent of dimension. In this paper, we first report on the integration of the aeroelastic code FAST into NREL's systems engineering tool, WISDEM, and the development of a high-throughput pipeline capable of sampling from arbitrary distributions, running FAST on a large scale, and postprocessing the results into estimates of fatigue loads. Second, we use this tool to run a variety of studies aimed at comparing grid-based and Monte Carlo-based approaches with calculating long-term fatigue loads. We observe that for more than a few dimensions, the Monte Carlo approach can represent a large improvement in computational efficiency, but that as nonlinearity increases, the effectiveness of Monte Carlo is correspondingly reduced. The present work sets the stage for future research focusing on using advanced statistical methods for analysis of wind turbine fatigue as well as extreme loads.

17 WIND ENERGY↗

Simulation of axial tensile well deformation during reservoir compaction in offshore unconsolidated methane hydrate-bearing formation

Sand production encountered in the 2013 offshore field gas production tests at the Nankai Trough, Japan, could be attributed to well failure during reservoir compaction. In this study, well integrity under various reservoir compaction patterns for the Nankai Trough case is examined using a well-formation finite element model. Here, the modelling details include the inclusion of a cement sheath as well as the modelling of construction processes (such as cement shrinkage). Well elongation in the overburden layer becomes significant when the reservoir subsidence is localized near the wellbore under large depressurization. Results show that the maximum plastic deviatoric strain level in the cement could reach 0.7% when the maximum reservoir subsidence reaches 0.85 m and cement shrinkage is limited. When cement shrinkage rises to 0.75%, the maximum plastic deviatoric strain increases to 2.4% as the cement accumulates additional plastic strain during shrinkage due to its deformation being constrained by the casing. In order to prevent the cement from failure, it might be effective to hold the pressure drawdown at a low level (e.g., several MPa) until the hydrate dissociation front advances to a certain radius from the well (e.g., a couple of tens of metres).

58 GEOSCIENCES↗

Framework for assessing impacts of pile-driving noise from offshore wind farm construction on a harbour seal population

Offshore wind farm developments may impact protected marine mammal populations, requiring appropriate assessment under the EU Habitats Directive. We describe a framework developed to assess population level impacts of disturbance from piling noise on a protected harbour seal population in the vicinity of proposed wind farm developments in NE Scotland. Spatial patterns of seal distribution and received noise levels are integrated with available data on the potential impacts of noise to predict how many individuals are displaced or experience auditory injury. Expert judgement is used to link these impacts to changes in vital rates and applied to population models that compare population changes under baseline and construction scenarios over a 25 year period. We use published data and hypothetical piling scenarios to illustrate how the assessment framework has been used to support environmental assessments, explore the sensitivity of the framework to key assumptions, and discuss its potential application to other populations of marine mammals. -- Highlights: • We develop a framework to support Appropriate Assessment for harbour seal populations. • We assessed potential impacts of wind farm construction noise. • Data on distribution of seals and noise were used to predict effects on individuals. • Expert judgement linked these impacts to vital rates to model population change. • We explore the sensitivity of the framework to key assumptions and uncertainties.

54 ENVIRONMENTAL SCIENCES↗

Simulation of wellbore construction in offshore unconsolidated methane hydrate-bearing formation

The unconsolidated nature of offshore methane hydrate-bearing formation poses concerns for sustainable methane gas production as the weak formation is susceptible to disturbance during wellbore construction. Furthermore, this could contribute to loss of well integrity which could manifest as sand production and error in the interpretation of downhole tests such as mini-frac tests. In this study, a simulation methodology of wellbore construction process is proposed. A finite element model adopting this methodology is developed in order to assess the effect of wellbore construction process on the integrity of the unconsolidated methane hydrate-bearing formation in the Nankai Trough, Japan. The primary objectives are (i) to develop a modelling methodology of well construction process for numerical simulations, (ii) to assess the zone and magnitude of well construction-induced stress/strain disturbance in the formation and (iii) to evaluate relative impact of each well construction stage on the integrity of the formation. The results from this study show that the zone of horizontal stress disturbance from the geostatic state due to wellbore construction could extend to more than three times the radius of the wellbore. Following the wellbore construction, the deviator stress is concentrated in the hydrate reservoir sublayers with high hydrate saturation while plastic deviatoric strain has accumulated in the sublayers with low hydrate saturation. The results also show that modelling of cement shrinkage process is crucial in predicting the concentration of deviator stress in the high hydrate saturation layers.

03 NATURAL GAS↗

Optimizing investments in coupled offshore wind-electrolytic hydrogen storage systems in Denmark

In response to electricity markets with growing levels of wind energy production and varying electricity prices, this research examines incentives for investments in integrated renewable energy power systems. A strategy for using optimization methods for a power system consisting of wind turbines, electrolyzers, and hydrogen fuel cells is explored. This research reveals the investment potential of coupling offshore wind farms with different hydrogen systems. The benefits in terms of a return on investment are demonstrated with data from the Danish electricity markets. This research also investigates the tradeoffs between selling the hydrogen directly to customers or using it as a storage medium to re-generate electricity at a time when it is more valuable. Finally, this research finds that the most beneficial configuration is to produce hydrogen at a time that complements the wind farm and sell the hydrogen directly to end users.

25 ENERGY STORAGE↗

Physical property characteristics of gas hydrate-bearing reservoir and associated seal sediments collected during NGHP-02 in the Krishna-Godavari Basin, in the offshore of India

India’s National Gas Hydrate Program Expedition 02 (NGHP-02) was conducted to better understand geologic controls on gas hydrate occurrence and morphology, targeting coarse-grained sediments along the lower continental slope offshore eastern India. This study combines seismic, logging-while-drilling data, and a petroleum system approach to provide a regional geologic and lithologic context for: 1) gas hydrate morphology and distribution, and 2) effects of fine-grained sediments (clays and other grains smaller than 63µm) on gas production in NGHP-02 Area B in the Krishna-Godavari Basin. Area B seismic data show a buried anticline/syncline structure with strong reflectors, R1 and R2, that delineate two of the five lithologic units: Unit I (shallowest), II (R1), III, IV (R2) and V (below the bas of gas hydrate stability). Throughout Area B, gas hydrate morphology depends on its placement within these units. Specifically, core- and grain-scale measurements indicate fines content exerts a primary control on the gas hydrate distribution and morphology. Units I, II and III are generally fine-grained. On the anticline crest, these units host primarily grain-displacing gas hydrate veins linked to pore-occupying gas hydrate in thin, localized, coarser-grained deposits. Diatoms in Unit III increase porosity with depth, reaching ~70% where it contacts Unit IV, the gas hydrate reservoir associated with reflector R2. The Unit III lithology and porosity allow fluid and dissolved-phase methane to escape Unit IV and form gas hydrate in the fine-grained overburden. Within Unit IV, fine-grained layers are interbedded with coarser-grained gas hydrate reservoir sands, and the fines content even in the sands is high enough to impact hydraulic and mechanical properties during gas production. Fluid motion during gas production can mobilize fines, which can then clog pore throats, limiting production rates. In conclusion, pore-water freshening during gas hydrate dissociation can increase fines mobilization, particularly given the smectite identified in the fine-grained interbeds.

03 NATURAL GAS↗

Numerical simulations of depressurization-induced gas production from an interbedded turbidite gas hydrate-bearing sedimentary section in the offshore India: Site NGHP-02-16 (Area-B)

The recent National Gas Hydrate Program Expedition 02 (NGHP-02) identified the existence of gas hydrate-bearing sand reservoirs at a number of sites in the offshore of India including Site NGHP-02-16 in Area-B of the Krishna-Godavari Basin. The architecture of that gas hydrate accumulation is characterized by thin, gas hydrate-bearing, high quality sand layers interbedded with mud layers within a turbidite sedimentary interval. The lowest gas hydrate-bearing layer contacting a thinly-interbedded saline aquifer designates the base of the gas hydrate stability zone (BGHSZ). The proximity of the BGHSZ and the average temperature around 20 °C make the reservoir a favorable target for hydrate destabilization by means of the depressurization method. The results of the reservoir simulations indicate high gas production potential from this marine gas hydrate deposit with manageable concomitant water production using a well completion design that hydraulically isolates layers with water-saturated sands. Using a detailed geological input model, the predicted cumulative gas rates reach ~3.1 × 10 4 m 3 /day (~1.1 MMscf/day) after 90 days of continuous depressurization and demonstrate sustained production rates ~3.0 × 10 4 m 3 /day (~1.0 MMscf/day) after 5 years of production. The interbedded nature of this gas hydrate occurrence promotes the development of horizontal dissociation interfaces between gas hydrate-bearing sand and mud layers. As a result, non-uniform gas production along the horizontal interfaces becomes a primary determinant of reservoir performance. Simulation cases have been executed to determine the impact of the uncertainty in in situ reservoir permeability and the manner in which intrinsic permeability dynamically changes during dissociation in response to the imposed effective stress increase. Here, the cases based on low initial effective permeability and high sensitivity of compaction to stress result in the least favorable production predictions.

58 GEOSCIENCES↗

Analysis of impact toughness scatter in simulated coarse-grained HAZ of E550 grade offshore engineering steel from the aspect of crystallographic structure

Highlights: • Crystallographic structure evolution in CGHAZ caused by variation of prior austenite grain size was analyzed quantitatively. • Variant selection rules changed from CP (close-packed plane) to Bain grouping with decreasing of prior austenite grain size. • A possible correlation between impact toughness scatter and crystallographic structure was established. - Abstract: This study aims at providing a new insights into the impact toughness scatter from the aspect of crystallographic structure. It demonstrated that the large impact toughness scatter associated much to the microstructure diversity. The crystallographic structure with evident scatter will display obvious discrepancy. In this work, three groups of samples simulated coarse-grained heat affected zone (CGHAZ) of an offshore engineering steel were obtained at different cooling rates. The Charpy test results showed that the toughness decreases dramatically with the decrease of cooling rate. However, the largest scatter in impact toughness occurred in the sample with medium cooling rate (15 °C/s), which was attributed to the heterogeneity in crystallographic structures. The visualization of crystallographic features showed that the prior austenite grain size has a significant effect on bainitic variant selection, which governed the effective grain size and crack propagation mechanism. CP (close-packed plane) grouping of variants is more likely to take place in large austenite grain, indicating that the size of CP region is larger than Bain zone, and the crack is short and flexural. On the contrary, in smaller austenite grain, Bain grouping of variants that always forms low angle grain boundary and favors crack propagation dominates the transformation, and it will promote the crack to propagate through the entire Bain zone and then yield large long crack. However, these two cases can co-exist in the same sample at medium cooling rate, indicating that the cleavage fracture is controlled by the effective grain size (Bain-zone size) and the scatter in impact toughness is associated much to the proportion and relative location between fine and coarse Bain zones.

36 MATERIALS SCIENCE↗

Centrifuge modeling of lateral bearing behavior of offshore wind turbine with suction bucket foundation in sand

Suction bucket foundation is a promising alternative for offshore wind turbine foundations. The lateral bearing behavior and failure mechanism are significant topics for optimizing its design criteria. In this study, a group of centrifuge tests were performed to investigate the lateral bearing capacity of suction bucket foundation with three aspect ratios. Force-controlled lateral static and cyclic tests were performed at a centrifuge acceleration of 50g. Four soil conditions were considered in centrifuge tests with a combination of loose/dense and dry/saturated sand. The load-displacement and the stiffness-displacement relationships are presented in the paper, and it is concluded that the lateral bearing capacity can be reached when the normalized lateral displacement (displacement divided by the bucket diameter) reached 3% as the first method. Displacement rates are plotted against the lateral load to give the second method for defining the ultimate lateral capacity. In cyclic tests, the lateral displacement and stiffness are correlated to the cycle numbers in the first 5 cycles, but the change is less apparent in the rest. The results demonstrated the behavior of bucket foundation in service conditions. Finally, a simplified calculation method is used as the third method and checked with tests results.

17 WIND ENERGY↗

Seismic centrifuge modelling of suction bucket foundation for offshore wind turbine

Wind Energy is the one of the most promising renewable energy. Suction bucket foundation is considered to be a viable type of wind turbine foundation. Soil liquefaction caused by earthquakes at offshore seismic active area may lead to a significant degradation of soil strength and stiffness. In this study, nine centrifuge tests were carried out to investigate the seismic response of suction bucket foundation under earthquake loading. Both dry and saturate soil conditions were considered in tests. The geometric design of five suction bucket models considered the bucket diameter, penetration depth, and modified buckets with inside compartments. It was found that soil underlying and near the bucket foundation shown a better ability to resist liquefaction in saturated tests comparing to free field while no significant differences were observed in dry tests. The five bucket models performed quite differently, which demonstrated the aspect ratio effects and inside-bucket compartment effects. The results provide insight into optimized design of suction bucket foundation for wind turbine.

17 WIND ENERGY↗

Analysis of ancient-river systems by 3D seismic time-slice technique: A case study in northeast Malay Basin, offshore Terengganu, Malaysia

Fluvial sandstones constitute one of the major clastic petroleum reservoir types in many sedimentary basins around the world. This study is based on the analysis of high-resolution, shallow (seabed to 500 m depth) 3D seismic data which generated three-dimensional (3D) time slices that provide exceptional imaging of the geometry, dimension and temporal and spatial distribution of fluvial channels. The study area is in the northeast of Malay Basin about 280 km to the east of Terengganu offshore. The Malay Basin comprises a thick (> 8 km), rift to post-rift Oligo-Miocene to Pliocene basin-fill. The youngest (Miocene to Pliocene), post-rift succession is dominated by a thick (1–5 km), cyclic succession of coastal plain and coastal deposits, which accumulated in a humid-tropical climatic setting. This study focuses on the Pleistocene to Recent (500 m thick) succession, which comprises a range of seismic facies analysis of the two-dimensional (2D) seismic sections, mainly reflecting changes in fluvial channel style and river architecture. The succession has been divided into four seismic units (Unit S1-S4), bounded by basin-wide strata surfaces. Two types of boundaries have been identified: 1) a boundary that is defined by a regionally-extensive erosion surface at the base of a prominent incised valley (S3 and S4); 2) a sequence boundary that is defined by more weakly-incised, straight and low-sinuosity channels which is interpreted as low-stand alluvial bypass channel systems (S1 and S2). Each unit displays a predictable vertical change of the channel pattern and scale, with wide low-sinuosity channels at the base passing gradationally upwards into narrow high-sinuosity channels at the top. The wide variation in channel style and size is interpreted to be controlled mainly by the sea-level fluctuations on the widely flat Sunda land Platform.

58 GEOSCIENCES↗

Lateral capacity assessment of offshore wind suction bucket foundation in clay via centrifuge modelling

The lateral bearing behaviors of suction bucket foundations for offshore wind turbines are investigated by centrifuge modelling in this paper. The centrifuge tests were performed in lightly over-consolidated clay and heavily over-consolidated clay, and three bucket foundation models with aspect ratios of 0.38, 0.5, and 1.3 were tested. The tests were force-controlled, and both static loads and cyclic loads were applied. In static tests, ultimate bearing capacities of suction bucket foundations were extracted from load-displacement curves as the first method, and the results were reinforced by stiffness-displacement curves. The displacement rates were calculated to find critical bearing capacities and ultimate bearing capacities of the foundations as the second method. The cyclic tests include cyclic loads with uniform and increased amplitudes. The accumulated lateral displacements and secant stiffnesses were discussed, and their variations with cycle numbers were studied.

17 WIND ENERGY↗