Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear structure data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Development of Optical Fiber-Based Sensors for Nuclear Microreactor Structural Health Monitoring

This report provides an experimental assessment of two different optical fiber–based acoustic sensors that are being investigated for application in nuclear microreactors to enhance structural health monitoring capabilities. Optical fibers are resilient in high-temperature and high-radiation environments, have a small sensor footprint, are immune to electromagnetic interference, and are capable of spatially distributed sensing. The two sensors investigated here are (1) Fabry–Pérot Cavities (FPCs) between two copper-coated fibers, embedded in nickel capillary tubes and (2) type-I fiber Bragg grating (FBG) arrays contained within metal capillary tubes. These sensors can be interrogated using low-coherence interferometry or swept wavelength interferometry, respectively, to measure the resonant frequencies of the components or systems to which these sensors are bonded. The FPC developed herein has been subjected to temperatures up to nearly 800°C while tack-welded to a tubular test specimen. Even at the highest temperatures, the measured resonant frequencies compared well with those obtained using an accelerometer that was bonded to an unheated portion of the specimen. The FBG array was tested in multiple bonding configurations to a tubular test specimen, all at room temperature, with the understanding that high temperature (i.e., type II) FBGs could be used to obtain similar data at high temperatures; the FBG array data were validated with noncontact laser vibrometry, which is being used at Los Alamos National Laboratory to relate acoustic signatures to component stresses and/or structural defects. The goal of this work is to identify the most promising techniques that are also compatible with operation in a microreactor environment.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Azimuthal Correlations within Exclusive Dijets with Large Momentum Transfer in Photon-Lead Collisions

The structure of nucleons is multidimensional and depends on the transverse momenta, spatial geometry, and polarization of the constituent partons. Such a structure can be studied using high-energy photons produced in ultraperipheral heavy-ion collisions. The first measurement of the azimuthal angular correlations of exclusively produced events with two jets in photon-lead interactions at large momentum transfer is presented, a process that is considered to be sensitive to the underlying nuclear gluon polarization. This study uses a data sample of ultraperipheral lead-lead collisions at s NN = 5.02 TeV , corresponding to an integrated luminosity of 0.38 nb - 1 , collected with the CMS experiment at the LHC. The measured second harmonic of the correlation between the sum and difference of the two jet transverse momentum vectors is found to be positive, and rising, as the dijet transverse momentum increases. A well-tuned model that has been successful at describing a wide range of proton scattering data from the HERA experiments fails to describe the observed correlations, suggesting the presence of gluon polarization effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Fast Emulation of Expensive Simulations using Approximate Gaussian Processes [Slides]

Nuclear Computational Low-Energy Initiative (NUCLEI) collaboration uses Density Functional Theory (DFT) simulations to predict the structure and binding energies of nuclei over a wide range of proton (Z) and neutron (N) numbers. The DFT simulations utilize a particular parameterization of a Skyrme energy density functional called UNEDF1 which depends on 12 free parameters that must be fit to data (M Kortelainen et al 2014). Fitting involves comparing (e.g.) predicted binding energies of nuclei to experimentally measured values. We use only binding energies as observables, but DFT with UNEDF1 will predict structure (shape) observables as well. In this work, assessing the capability of approximate GP emulators to balance emulator accuracy with computational speed to facilitate improved UNEDF1 calibration. Sparse GPs are straightforward to train and accurate. Calibration is not straightforward with MCMC (using MH or HMC/NUTS). We produced reusable software for continuing and building on this work as well as accessing and using Darwin cluster compute resources

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Studying electroweak few-body observables in chiral effective field theory

The use of nuclei to study electroweak probes is becoming increasingly relevant experimentally. The success of dark matter and neutrino experiments strongly depends on the ability to control nuclear effects in order to extract the fundamental parameters associated with external probes. Therefore, reliable theoretical calculations of nuclear structure and reactions, with well-controlled errors, are crucial for the success of experimental efforts. Currently, chiral effective field theory ($\chi$EFT) coupled with {\it ab-initio} methods represents one of the best approaches that fulfills these requirements. To use this approach as a tool for studying fundamental physics, it is essential to validate it against experimental data for which the calculations are well under control, such as the elastic scattering of electrons on nuclei. In this proceeding, I will present recent developments in the fitting of electromagnetic currents derived using $\chi$EFT and the calculation of electromagnetic form factors of light nuclei. The results of these calculations demonstrate the strength of the theory in describing the interaction of nuclei with electromagnetic probes over a broad range of momentum transfers and highlight the robustness of $\chi$EFT for analyzing future experimental data aimed at extracting fundamental parameters.

Gnech, Alex [Old Dominion Univ., Norfolk, VA (Unit↗
DOE OSTI2025

Progress Towards Developing Neutron Tolerant Magnetostrictive and Piezoelectric Transducers

Current generation light water reactors (LWRs), sodium cooled fast reactors (SFRs), small modular reactors (SMRs), and next generation nuclear plants (NGNPs) produce harsh environments in and near the reactor core that can severely tax material performance and limit component operational life. To address this issue, several Department of Energy Office of Nuclear Energy (DOE-NE) research programs are evaluating the long duration irradiation performance of fuel and structural materials used in existing and new reactors. In order to maximize the amount of information obtained from Material Testing Reactor (MTR) irradiations, DOE is also funding development of enhanced instrumentation that will be able to obtain in-situ, real-time data on key material characteristics and properties, with unprecedented accuracy and resolution. Such data are required to validate new multi-scale, multi-physics modeling tools under development as part of a science-based, engineering driven approach to reactor development. It is not feasible to obtain high resolution/microscale data with the current state of instrumentation technology. However, ultrasound-based sensors offer the ability to obtain such data if it is demonstrated that these sensors and their associated transducers are resistant to high neutron flux, high gamma radiation, and high temperature. To address this need, the Advanced Test Reactor National Scientific User Facility (ATR-NSUF) is funding an irradiation, led by PSU, at the Massachusetts Institute of Technology Research Reactor to test the survivability of ultrasound transducers. As part of this effort, PSU and collaborators have designed, fabricated, and provided piezoelectric and magnetostrictive transducers that are optimized to perform in harsh, high flux, environments. Four piezoelectric transducers were fabricated with either aluminum nitride, zinc oxide, or bismuth titanate as the active element that were coupled to either Kovar or aluminum waveguides and two magnetostrictive transducers were fabricated with Remendur or Galfenol as the active elements. Pulse-echo ultrasonic measurements of these transducers are made in-situ. This paper will present an overview of the test design including selection criteria for candidate materials and optimization of test assembly parameters, data obtained from both out-of-pile and in-pile testing at elevated temperatures, and an assessment based on initial data of the expected performance of ultrasonic devices in irradiation conditions

Reinhardt1, Brian↗
DOE OSTI2021

Method and apparatus to obtain limited angle tomographic images from stationary gamma cameras

A nuclear imaging system and method for performing three-dimensional imaging of anatomical structures. The system and method includes two or more gamma ray detectors each used in combination with a variable-slant hole collimator. The detectors are positioned in close proximity to, or in contact with, the structure being imaged. The detectors remain in a stationary position during the data collection process. An imaging or reconstruction method is then used to reconstruct a three-dimensional image from the data derived from the detectors.

Kross, Brian J.↗
DOE OSTI2022

Thermal scattering law for structure-dependent-Doppler broadening in FLASSH

Traditional Doppler broadening methods assume that target nuclei velocities follow a Maxwell-Boltzmann distribution which inherently assumes that the atoms are a free gas or that their velocities are independent of each other. This approximation is reasonable at high target temperatures and high neutron energies. However, nuclei are not independent: the lattice temperature and chemical binding will define the atomic motion. The thermal scattering law (i.e., TSL or S(α,β)) is a material property which describes the chemical binding and temperature response in terms of available momentum and energy states. In the thermal energy range, this TSL will define the thermal scattering cross sections. In the resonance region, the TSL offers a first-principles description of the probability distribution function for the velocity of the target nuclei. Using the TSL in Doppler broadening captures the structure of the material consistently from the thermal range into the resonance cross sections. In this work, both traditional free-gas and precise TSL Doppler broadening methods for resonance cross section evaluation have been implemented within the Full Law Analysis Scattering System Hub (FLASSH). This framework provides a generalized formulation for evaluating low-lying resonance data and streamlines nuclear data processing methods. TSL data generated using ab initio lattice dynamics (AILD) can be used to broaden cross section libraries in ENDF format for high-fidelity input into reactor physics calculations. These capabilities are demonstrated for the lowest absorption resonances of {sup 238}U in UO{sub 2}, UC and UN. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Evidence against the Efimov effect in 12 C from spectroscopy and astrophysics

Background: The Efimov effect is a universal phenomenon in physics whereby three-body systems are stabilized via the interaction of an unbound two-body subsystems. A hypothetical state in 12 C at 7.458-MeV excitation energy, comprising a loose structure of three α particles in mutual two-body resonance, has been suggested in the literature to correspond to an Efimov state in nuclear physics. The existence of such a state has not been demonstrated experimentally. Purpose: Using a combination of γ spectroscopy, charged-particle spectroscopy, and astrophysical rate calculations allowing for strict limits on the existence of such a state to been established here. Method: Using the combined data sets from two recent experiments, one with the TexAT (Texas Active Target) TPC (Time Projection Chamber) to measure α decay and the other with Gammasphere to measure γ decay of states in 12 C populated by 12 N and 12 B β decay, respectively, we achieve high sensitivity to states in close proximity to the α threshold in 12 C. Results: No evidence of a state at 7.458 MeV is seen in either data set. Using a likelihood method, the 95% confidence limit γ -decay branching ratio is determined as a function of the β-decay feeding strength relative to the Hoyle state. In parallel, calculations of the 3α reaction rate show the inclusion of the Efimov corresponds to a large increase in the reaction rate around 5 × 10 7 K. Conclusion: From decay spectroscopy—at the 95% confidence limit, the Efimov state cannot exist at 7.458 MeV with any γ-decay branching ratio unless the β strength is less than 0.7% of the Hoyle state. This limit is evaluated for a range of different excitation energies and the results are not favorable for existence of the hypothetical Efimov state in 12 C . Furthermore, the 3α reaction rate with the inclusion of a state between 7.43 and 7.53 MeV exceeds the rate required for stars to undergo the red giant phase.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Microstructural analysis of tristructural isotropic particles in high-temperature steam mixed gas atmospheres

High-temperature gas-cooled reactors (HTGRs) use tristructural isotropic (TRISO) particles embedded in a graphitic matrix material to form the integral fuel element. Potential off-normal reactor conditions for HTGRs include steam ingress with temperatures above 1,000 °C. Fuel element exposure to steam can cause the graphitic matrix material to evolve, forming an atmosphere composed of oxidants and oxidation products and potentially exposing the TRISO particles to these conditions. Investigating the oxidation response of TRISO particles exposed to a mixed gas atmosphere will provide insight into the stability under off-normal conditions. In this study, surrogate TRISO particles were exposed to high temperatures (T = 1,200 °C) in flowing steam (3% < pH 2 O < 21%) and CO (pCO < 1%) to determine the oxidation behavior of the SiC layer when exposed to various mixed gas atmospheres. Scanning electron microscopy, x-ray diffraction, and focused ion beam milling was used to determine the impact of CO and steam on the oxidation behavior of the SiC layer. Therefore, the data presented demonstrates how the SiC layer showed strong oxidation resistance due to limited SiO 2 growth and maintained its structural integrity under these off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Calculation of the Thermal Neutron Scattering Cross-Section of Solids Using OCLIMAX

The thermal neutron scattering cross-section of a solid depends on the energy (or wavelength) of the incident neutrons. Devising a method to calculate the energy dependence from first principles, without the approximations built in the scattering theory, has been a major undertaking in nuclear engineering. Here, we demonstrate such a calculation method using the program OCLIMAX. In this work, our approach eliminates various approximations and limitations involved in a regular calculation with the LEAPR module of NJOY code, and the results are compared with available experimental and theoretical data. It is also demonstrated how additional insight can be obtained from the calculated full dynamical structure factor. The results reported here show the great potential and excellent platform provided by OCLIMAX for future development in the study of neutron thermalization in solid materials for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Decay spectroscopy in the neutron-rich Mo–Ru–Pd region

A leading challenge of nuclear-structure research is to understand the properties of nuclides of extreme isospin. Experiments at radioactive-ion-beam facilities, such as the Facility for Rare Isotope Beams in the US, may answer key questions that address diverse topics including fundamental nuclear physics, stellar nucleosynthesis and nuclear applications. The neutron-rich Mo–Ru–Pd (Z = 42 – 46) nuclides are hypothesised to exhibit triaxial-oblate deformation. We performed an experiment with the Facility for Rare Isotope Beams Decay Station initiator (FDSi) to study the structure and decay properties of nuclides in this region. Over 100 different nuclides have been identified in a preliminary analysis of the data. This work presents a first look at several examples between Rb (Z = 37) and Ag (Z = 47). Performance of the FDSi and methods developed to measure ground-state and excited-state lifetimes are presented, and plans for future work are also discussed.

Allmond, James [ORNL] (ORCID:0000000165338721)↗
DOE OSTI2025

Ab Initio Study of the Beryllium Isotopes 7 Be to 12 Be

We present a systematic ab initio study of the low-lying states in beryllium isotopes from 7 Be to 12 Be using nuclear lattice effective field theory with the N 3 ⁢LO interaction. Our calculations achieve good agreement with experimental data for energies, radii, and electromagnetic properties. We introduce a novel, model-independent method to quantify nuclear shapes, uncovering a distinct pattern in the interplay between positive and negative parity states across the isotopic chain. By combining Monte Carlo sampling of the many-body density operator with a novel nucleon-grouping algorithm, the prominent two-center cluster structures, the emergence of one-neutron halo, complex nuclear molecular dynamics such as 𝜋 orbital and 𝜎 orbital, emerge naturally.

binding energy & masses↗
DOE OSTI2023

Towards the understanding of the genuine three-body interaction for p–p–p and p–p–Λ

Three-body nuclear forces play an important role in the structure of nuclei and hypernuclei and are also incorporated in models to describe the dynamics of dense baryonic matter, such as in neutron stars. So far, only indirect measurements anchored to the binding energies of nuclei can be used to constrain the three-nucleon force, and if hyperons are considered, the scarce data on hypernuclei impose only weak constraints on the three-body forces. In this work, we present the first direct measurement of the p–p–p and p–p–Λ systems in terms of three-particle correlation functions carried out for pp collisions at $\sqrt{s}$=13 TeV. Three-particle cumulants are extracted from the correlation functions by applying the Kubo formalism, where the three-particle interaction contribution to these correlations can be isolated after subtracting the known two-body interaction terms. A negative cumulant is found for the p–p–p system, hinting to the presence of a residual three-body effect while for p–p–Λ the cumulant is consistent with zero. This measurement demonstrates the accessibility of three-baryon correlations at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

OT Emulation Data Broker

The OT Emulation Data Broker system allows Simulink models to be connected to an emulated control system network. The package includes a Simulink S-Function that allows communication to the data broker via inter process communication; a data broker, which orchestrates communication between the emulated control system network and the simulation; an endpoint, which facilitates communication between the data broker and PLC's on the control network using ModBus/TCP; and an example PLC structured text files that work with OpenPLC, an open source emulated PLC. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. SAND2021-11479 O

Hahn, Andrew↗
DOE OSTI2021

OT Emulation Data Broker v.2.0

SAND2021-11479 O The OT Emulation Data Broker system allows Simulink models to be connected to an emulated control system network. The package includes a Simulink S-Function that allows communication to the data broker via inter process communication; a data broker, which orchestrates communication between the emulated control system network and the simulation; an endpoint, which facilitates communication between the data broker and PLC's on the control network using ModBus/TCP; and an example PLC structured text files that work with OpenPLC, an open source emulated PLC. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Hahn, Andrew↗
DOE OSTI2026

NN-OpInf

SAND2026-18878O The NN-OpInf tool is a PyTorch-based approach to operator inference that uses composable, structure-preserving neural networks to represent nonlinear operators. Operator inference is a machine learning method for inferring low-dimensional systems from data and polynomial models for system dynamics. However, many systems do not conform to polynomial structures, which NN-OpInf addresses by parameterizing operators with neural networks. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗
DOE OSTI2026

Report on the Update and Codification of Expert Knowledge into ASTM Standard Practice E521

The overall purpose of the Grand Challenge Integrated Research Project (IRP), Accelerating the Qualification of Materials to Enable Rapid Deployment of Advanced Reactors, is to fulfill several objectives. The first objective is to complete and demonstrate/establish the process for predicting the microstructure and properties of structural materials in reactor and at high doses using ion irradiation as an accurate predictive tool for assessing behavior under reactor irradiation. The second objective is for this process to be adopted as part of an ASTM standard, and to work with the US Nuclear Regulatory Commission to utilize this standard in licensing decisions on advanced reactor designs for which such data are nonexistent or impractical to achieve. The need for standardized procedures is apparent based on the outcomes of a recent round-robin experiment from laboratories using ion beams for radiation damage studies and the roadmap for ion beam technologies to address challenges for the advancement of nuclear energy technologies.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗