Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nickel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Vacancy surface migration mechanisms in dilute nickel-chromium alloys

We investigate the unitary mechanisms related to the surface migration of vacancies in dilute Ni-Cr alloys via first-principle calculations. We survey a complete set of surface and sub-surface migration paths for vacancies near the (100) free surface and calculate the corresponding migration barriers. Our results show that a vacancy migrating towards the free surface will face lower energy barriers to migrate via atomic exchange with a neighboring Cr atom rather than with a Ni atom. Once a vacancy reaches the free surface, it will be trapped there. Our results also reveal that, when a Cr atom sits in the atomic plane just below the free surface, any in-plane vacancy hopping jump that would result in the vacancy sitting on top a subsurface Cr atom is energetically unfavorable. Taken together, these fundamental unitary surface migration mechanisms offer insights into the complex interactions between surface segregation and vacancy migration phenomena in Ni-Cr-based alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Corrosion resistance of high nickel alloys in solar salt at 600 °C for up to 4000 h

This study focuses on the time dependent performance of the corrosion resistance of IN625, H230 and 740H alloys in the solar salt (60 wt% NaNO3, 40 wt% KNO3, at 600 °C) for up to 4000 h. Alloy IN625 showed the lowest mass change with parabolic oxidation kinetics that tends to stabilize with exposure time. Both 740H and H230 alloys deviated from the parabolic oxidation behavior beyond the 3000 h of exposure. Alloy 740H showed the highest mass loss due to the nonuniform surface oxidation and the high chromium dissolution rate. Internal oxidation was noticed with Alloy H230 due to the high tungsten concentrations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamics of precatalyst conversion and iron incorporation in nickel-based alkaline oxygen evolution reaction catalysts

The efficiency of alkaline water electrolyzers is limited by the oxygen evolution reaction (OER). The design of improved OER catalysts requires understanding of material changes induced by the electrolyte under oxidizing potentials. We compare four Ni-based thin-film precatalysts—Ni, NiO, Ni(OH) 2 , and NiS x —in 0.1 M KOH with and without Fe impurities. Precatalyst conversion to the active oxyhydroxide catalysts and their OER performance are induced and followed using cyclic voltammetry. Without Fe electrolyte impurities, the precatalysts convert at different rates to a similar, modestly active NiOOH catalyst. Added Fe impurities are incorporated concurrently with the oxyhydroxide formation leading to active Ni 1-x Fe x OOH catalysts. The NiS x and Ni(OH) 2 precatalysts rapidly convert to oxyhydroxides both with and without Fe, while conversion of Ni and especially NiO is slowed down by Fe impurities. Choice of the precatalyst and presence of Fe impurities are key factors in designing active Ni 1-x Fe x OOH OER catalysts for electrolyzers.

alkaline electrolysis↗
DOE OSTI2021

Covalent Functionalization of Nickel Phosphide Nanocrystals with Aryl-Diazonium Salts

Covalent functionalization of Ni 2 P nanocrystals was demonstrated using aryl-diazonium salts. Spontaneous adsorption of aryl functional groups was observed, with surface coverages ranging from 20 to 96% depending on the native reactivity of the salt as determined by the aryl substitution pattern. Increased coverage was possible for low reactivity species using a sacrificial reductant. Functionalization was confirmed using thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The structure and energetics of this nanocrystal electrocatalyst system, as a function of ligand coverage, were explored with density functional theory calculations. The Hammett parameter of the surface functional group was found to linearly correlate with the change in Ni and P core-electron binding energies and the nanocrystal's experimentally and computationally determined work function. The electrocatalytic activity and stability of the functionalized nanocrystals for hydrogen evolution were also improved when compared to the unfunctionalized material, but a simple trend based on electrostatics was not evident. Density functional theory was used to understand this discrepancy, revealing that H adsorption energies on the covalently functionalized Ni 2 P also do not follow the electrostatic trend and are predictive descriptors of the experimental results.

14 SOLAR ENERGY↗
DOE OSTI2024

Revealing Structural Evolution of Nickel Phosphide-Iron Oxide Core–Shell Nanocatalysts in Alkaline Medium for the Oxygen Evolution Reaction

Metal phosphide-containing materials have emerged as a potential candidate of non-precious metal-based catalysts for alkaline oxygen evolution reaction (OER). While it is known that metal phosphide undergoes structural evolution, considerable debate persists regarding the effects of dynamics on the surface activation and morphological stability of the catalysts. In this study, we synthesize NiP x -FeO x core-shell nanocatalysts with an amorphous NiP x core designed for enhanced OER activity. Using ex-situ X-ray absorption spectroscopy, we elucidate the local structural changes as a function of cyclic voltammetry cycles. Our studies suggest that the presence of corner-sharing octahedra in the FeO x shell improves structural rigidity through interlayer cross-linking, thereby inhibiting the diffusion of OH - /H 2 O. Thus, the FeO x shell preserves the amorphous NiP x core from rapid oxidation to Ni 3 (PO 4 ) 2 and Ni(OH) 2 . On the other hand, the incorporation of Ni from the core into the FeO x shell facilitates absorption of hydroxide ions for OER. As a result, the Ni/Fe(OH) x at the surface oxidizes to the active γ-(oxy)hydroxide phase under the applied potentials, promoting OER. This intriguing synergistic behavior holds significance as such synthetic route involving the FeO x shell can be extended to other systems, enabling manipulation of surface adsorption and diffusion of hydroxide ions. These findings also demonstrate that nanomaterials with core-shell morphology can be tuned to leverage the strength of each metallic component for improved electrochemical activities.

25 ENERGY STORAGE↗
DOE OSTI2025

Thermodynamic and Kinetic Mechanisms Governing the Synthesis of Nickel-Poor Cathodes

A deeper understanding of the thermodynamics and kinetics governing the lithiation and layering mechanisms of NMC cathode materials (LiNixMnyCozO 2 , where x + y + z = 1) offers valuable insights for enhancing synthesis methods and improving cathode performance. By employing atomistic and mesoscale approaches informed by in situ powder X-ray diffraction (PXRD) experiments, critical parameters for comprehending lithiation and layering processes and reaction rates were identified. The mesoscale approach captured the evolution of the phases and crystallite size observed in the in situ PXRD, revealing the differences in reaction rates with the use of different lithium salts and starting precursors. Ab initio molecular dynamics (AIMD) underscored the importance of vacancies and structural defects in promoting ion mobility and facilitating the nucleation of a layered domain. This nucleation disrupts the symmetry of disordered phases, ultimately creating a strained phase that serves as a buffer between layered and disordered regions. The lithiation and layering processes reflect a dynamic balance between the thermodynamic drive for a low-energy layered structure and the kinetic of diffusion, which is influenced by temperature and lithium vacancy concentration. Overall, reaction mechanisms are driven by the inherent defects of the intermediate phase that differ for NMC cathode materials. The lithium salts impact the rates of lithiation and layering, with a much slower process for Li 2 CO 3 .

25 ENERGY STORAGE↗
DOE OSTI2019

Toward Long-Life, Ultrahigh-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries: Optimizing the Interphase Chemistry with a Dual-Functional Polymer

Boosting the Ni content in LiMO 2 (M = Ni, Co, Mn, etc.) layered oxides is a promising way to establish high-energydensity, low-cost cathodes, but the poor cathode surface stability is a daunting challenge for their practical viability. Herein, by constructing a dual-functional binder framework with a conductive polymer - polyaniline (PANI), the ultrahigh-Ni layered oxide cathode (LiNi 0.94 Co 0.06 O 2 ) exhibits significantly improved cyclability, with a capacity retention greatly increased from 47% to 81% over 1,000 cycles in full cells. It is demonstrated that the acidic species (e.g. HF) in the electrolyte can be efficiently scavenged through a protonation process of PANI, hence the cathode surface reactivity is greatly suppressed and the rock-salt phase propagation into bulk structure is considerably alleviated. Furthermore, the PANI binder system effectively prevents both the cathode-electrolyte interphase (CEI) and anode-electrolyte interphase (AEI) from degrading to a thick “triple-layer” architecture upon extensive cycling, resulting in more robust, thinner CEI and AEI with regulated interphasial chemistry. Moreover, the delocalized π-conjugated electrons along the backbone of PANI facilitate fast electron transfer and promote rate capability even at low temperatures (-20 °C). Finally, this work sheds light on rational binder engineering for developing high-energy-density lithium-ion batteries with acceptable cycle life.

25 ENERGY STORAGE↗
DOE OSTI2026

Iodine Capture with Copper-Electroplated Nickel Foams

This work explores the use of Ni0 foam scaffolds for Cu0 coatings for use as sorbents for iodine. The Cu0 electroplating was performed from aqueous copper(II) sulfate (CuSO4) solutions under different conditions to achieve a range of Cu0-layer thicknesses (4.89 ± 1.05 μm–57.32 ± 3.95 μm) with 900 A·m–2 current densities and coating times of 15–180 min. The thickest coatings resulted in Cu0-plated Ni0 foams with >89 mass % Cu0 in the final product. Iodine capture experiments showed very high Cu0 utilizations of 91.9–97.3 mass % at iodine loadings of 839–1774 mg·g–1 through the formation of CuI (marshite; space group F-43m). No evidence was found of iodine reactions taking place with the Ni0 scaffold, so it remained in iodine-loaded Cu-electroplated Ni foams as structural support to provide mechanical rigidity to the foams during the iodine loading process. Hot pressing of these materials can be used to create a CuI/Ni ceramic-metal composite waste form for disposal as demonstrated with spark plasma sintering.

Riley, Brian [Pacific Northwest National Laborator↗