SEARCH · Engineering Papers
Results for “Neutron Spectroscopy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Institute for Quantum Matter
The mission of the Institute for Quantum Matter (IQM) Energy Frontier Research Center was to discover and understand emergent properties in material systems with the potential for transformative impacts on energy and information technologies.
The R -process Alliance: A Nearly Complete R -process Abundance Template Derived from Ultraviolet Spectroscopy of the R -process-enhanced Metal-poor Star HD 222925 *
We present a nearly complete rapid neutron-capture process (r-process) chemical inventory of the metal-poor ([Fe/H] = -1.46 ± 0.10) r-process-enhanced ([Eu/Fe] = +1.32 ± 0.08) halo star HD 222925. This abundance set is the most complete for any object beyond the solar system, with a total of 63 metals detected and seven with upper limits. It comprises 42 elements from 31 ≤ Z ≤ 90, including elements rarely detected in r-process-enhanced stars, such as Ga, Ge, As, Se, Cd, In, Sn, Sb, Te, W, Re, Os, Ir, Pt, and Au. We derive these abundances from an analysis of 404 absorption lines in ultraviolet spectra collected using the Space Telescope Imaging Spectrograph on the Hubble Space Telescope and previously analyzed optical spectra. A series of appendices discusses the atomic data and quality of fits for these lines. The r-process elements from Ba to Pb, including all elements at the third r-process peak, exhibit remarkable agreement with the solar r-process residuals, with a standard deviation of the differences of only 0.08 dex (17%). In contrast, deviations among the lighter elements from Ga to Te span nearly 1.4 dex, and they show distinct trends from Ga to Se, Nb through Cd, and In through Te. The r-process contribution to Ga, Ge, and As is small, and Se is the lightest element whose production is dominated by the r-process. The lanthanide fraction, log X La = -1.39 ± 0.09, is typical for r-process-enhanced stars and higher than that of the kilonova from the GW170817 neutron-star merger event. We advocate adopting this pattern as an alternative to the solar r-process-element residuals when confronting future theoretical models of heavy-element nucleosynthesis with observations.
Gamma-ray/neutron spectroscopy from the Mars observer
The Gamma-Ray Spectrometer (GRS) experiment on Mars Observer will measure gamma rays and neutrons that escape from Mars. The intensities of gamma-ray lines and of the thermal and epithermal neutrons can be used to study many problems related to Martian volcanism and volatiles. The results of theoretical calculations for the production and transport of gamma rays and neutrons indicate that the GRS should be able to determine the abundances of many elements and the amounts and stratigraphy of H2O and CO2 on and in the top meter of the Martian surface. Design considerations of the GRS are discussed.
NICER Observations of the 2018 Outburst of XTE J1810-197
We present the earliest available soft X-ray observations of XTE J1810−197, the prototypical transient magnetar, obtained 75–84 days after its 2018 outburst with the Neutron Star Interior Composition Explorer. Using a series of observations covering eight days we find that its decreasing X-ray flux is well described by either a blackbody plus power law or a two-blackbody spectral model. The 2–10 keV flux of the source varied from (1.206 ± 0.007) × 10−10 to (1.125 ± 0.004) x 10-10 erg s-1 cm-2, a decrease of about 7% within our observations and 44% from that measured 7–14 days after the outburst with NuSTAR. We confirm that the pulsed fraction and spin pulse phase of the neutron star are energy dependent up to at least 8 keV. Phase-resolved spectroscopy of the pulsar suggests magnetospheric variations relative to the line of sight.
Review of SiC material development for nuclear fusion applications: Cross-cutting research and emerging opportunities
The SiC-based materials, particularly SiC-fiber-reinforced SiC matrix (SiC/SiC) composites, show strong potential for structural and functional applications in future fusion power plants because they can operate at high temperatures with a range of coolants and breeders, thereby enabling higher energy conversion efficiency. Here, this paper presents recent advancements in the development of SiC-based materials, focusing on processing techniques and material performance and resistance under fusion-relevant environments. The processing activities have emphasized near-net-shape fabrication and the joining of SiC subcomponents, with processing methods and material compositions informed by previous irradiation experiments on various grades of SiC. Research on irradiation effects has remained focused on degradation mechanisms and the microstructural optimization of SiC/SiC composites irradiated to high neutron damage levels. Analysis of irradiation defects in SiC has advanced via the application of cutting-edge characterization methods, among which Raman spectroscopy is becoming a common tool to assess atomic-scale chemical disorder. Fusion–fission crosscutting irradiation research has explored combined effects in SiC/SiC composites with application-relevant geometries, including bowing of SiC/SiC composite channels under neutron flux gradients, stress evolution in SiC/SiC composite tubes under through-thickness temperature gradients, and irradiation-enhanced corrosion in SiC. Finally, research opportunities for component testing and assessment under fusion-relevant conditions, in support of emerging concepts from the private fusion sector, are discussed.
Shell structure of 43 S and collapse of the N = 28 shell closure
The single-particle structure of the N = 27 isotones provides insights into the shell evolution of neutron-rich nuclei from the doubly-magic 48 Ca toward the drip line. 43 S was studied employing the one-neutron knockout reaction from a radioactive 44 S beam. Using a combination of prompt and delayed γ-ray spectroscopy the level structure of 43 S was clarified. Momentum distributions were analyzed and allowed for spin and parity assignments. The deduced spectroscopic factors show that the 44 S ground-state configuration has a strong intruder component. Here, the results were confronted with shell model calculations using two effective interactions. General agreement was found between the calculations, but strong population of states originating from the removal of neutrons from the 2p 3/2 orbital in the experiment indicates that the breakdown of the N = 28 magic number is more rapid than the theoretical calculations suggest.
TORONE: Total Characterisation by Remote Observation of Nuclear Environments - 20591
This paper describes the autonomous robotic systems developed in the TORONE project (Total Characterisation by Remote Observation of Nuclear Environments) for combined characterisation by remote techniques in nuclear environments. There are four main components to the system. Firstly, robot operation which uses a Robot Operating System (ROS) allowing ease of communication between hardware and software alongside robot vision systems such as Lidar and/or photogrammetry. Secondly, radiation detection instrumentation for gamma and neutron sources which is also collimated for spatial resolution. Thirdly, photonic characterisation instrumentation for remote material identification by means of Raman spectroscopy and Laser induced breakdown spectroscopy (LIBS). Finally, a data management system is described which contains the TORONE characterisation data with the ability to overlay material characterisation information onto 3D maps of the nuclear environment. Preliminary results are described alongside discussion of some of the synergies of the combined approach. There are many applications of such an autonomous system in nuclear decommissioning, waste management and asset management. (authors)
Precise Control of Noncovalent Interactions in Semiconducting Polymers for High-Performance Organic Field-Effect Transistors
Performed through side-chain engineering or by incorporating intramolecular locking units, the directionality and dynamic nature of noncovalent interactions are particularly attractive for the design of novel semiconducting materials in a wide variety of applications. This work investigates the nature and position of hydrogen bonding (intra- versus intermolecular), with the objective of developing a rational approach to the design of new semiconducting materials with improved properties in the solid state. To control the polymer chains’ self-assembly, a π-conjugated polymer incorporating a moiety capable of generating intramolecular hydrogen bonding is evaluated against a polymer that allows for intermolecular hydrogen bonding. Characterization through various techniques, optical spectroscopies, grazing incidence wide-angle x-ray scattering, and solution small-angle neutron scattering showed that intramolecular hydrogen bonds resulted in materials with improved crystallinity and higher effective conjugation in the solid state. Additionally, the effect of the noncovalent interaction configuration on the optoelectronic properties was analyzed in organic field-effect transistor fabrication. Devices prepared from the materials with intramolecular hydrogen bonds showed significantly higher performance, with three orders of magnitude higher charge mobility than their counterparts fabricated from polymers with intermolecular hydrogen bonds. These results confirm the importance of chemical design on polymer structures and offer a novel route for the design of high-efficiency semiconducting polymers for next-generation electronics.
Sustainable Shape Memory Elastomers with Reduced Melt Viscosity and Enhanced Stiffness
Melt reactive processing of lignin with nitrile rubber is a promising approach to synthesizing shape memory materials. The strong intramolecular interactions in lignin macromolecular structures, caused by π–π stacking in aromatic rings and hydrogen bonding, often result in large phase separation or low miscibility with rubbers. In this study, we investigated the chemical and molecular characteristics, as well as the stiffness and complex viscosity, of modified kraft lignin melt-reacted with an acrylonitrile/butadiene copolymer containing 41% acrylonitrile (NBR41). To enhance the macromolecular compatibility of kraft lignin with NBR41, kraft lignin was cross-linked with poly(propylene glycol) diglycidyl ether (PPDE) and trimethylolpropane triglycidyl ether (TTE), both rich in epoxy reactive groups capable of forming chemical bonds with hydroxyl and carboxyl groups. Here, our findings demonstrate that the modification of kraft lignin with PPDE and TTE resulted in significantly increased stiffness of the composites. The elastic modulus of NBR41-Kraft lignin-PPDE and NBR41-Kraft lignin-TTE increased by 82 and 162%, respectively. Both the yield strength and Young’s modulus of these two samples showed dramatic improvements. Specifically, the yield strength and Young’s modulus of NBR41-Kraft lignin-TTE increased nearly 4 and 3-fold, respectively, compared to the control sample. Interestingly, despite significant improvements in mechanical properties, the viscosity of NBR41-Kraft lignin-PPDE was substantially lower than that of the control sample. At 210 °C and an angular frequency of 1 rad/s, the complex viscosity of NBR41-Kraft lignin was approximately 100.25 ± 4.77 kPa·s, while that of NBR41-Kraft lignin-PPDE was significantly lower at 56 ± 0.93 kPa·s. These findings were validated through Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic mechanical analysis, thermal characterization, rheological tests, and quasi-elastic neutron scattering techniques.
Proton decay spectroscopy of S 28 and Cl 30
States in 28 S and 30 Cl have been studied using one- and two-proton decay spectroscopy. In the first spectrometer setting, states in 28 S were populated following one-neutron knockout from a fast 29 S beam. Three new states are observed in 28 S from one- and two-proton decay. For the two-proton case the nature of the decay was investigated and found to proceed via sequential two-proton emission. For the second setting, states in 30 Cl were populated via one-proton knockout from a fast 31 Ar beam. The decay energy of the ground and first excited state were measured, with the ground-state decay energy found to be in disagreement with a previous measurement. Here, the spin and parity of these two 30 Cl states were inferred from shell-model calculations.
Improving fission-product decay data for reactor applications: part I—decay heat
Effort has been expended to assess the relative merits of undertaking further decay-data measurements of the main fission-product contributors to the decay heat of neutron-irradiated fissionable fuel and related actinides by means of Total Absorption Gamma-ray Spectroscopy (TAGS - sometimes abbreviated to TAS) and Discrete Gamma-ray Spectroscopy (DGS). This review has been carried out following similar work performed under the auspices of OECD/WPEC-Subgroup 25 (2005–2007) and the International Atomic Energy Agency (2009, 2014), and various highly relevant TAGS measurements completed as a consequence of such assessments. Here, we present our recommendations for new decay-data evaluations, along with possible requirements for total absorption and discrete high-resolution gamma-ray spectroscopy studies that cover approximately 120 fission products and various isomeric states.
Measurement of the 73 As (𝑛,𝛾) cross section at thermal neutron energies
A measurement of the thermal neutron capture cross section of 73 As (t 1/2 = 80.3 d) was performed utilizing the University of Missouri Research Reactor. Two sealed quartz tubes containing 73 As were prepared and characterized before being irradiated for ≈1 week. The resulting production of 74 As was quantified with γ-ray spectroscopy. Monitor foils of Fe, Zr, and Mo were irradiated alongside the 73 As samples to assess the thermal and resonance region neutron fluxes. In conclusion, the thermal 73 As (𝑛,𝛾) cross section was determined to be 56.1 ± 8.9 b based on the average of the two 73 As samples and represents the first neutron-induced reaction cross section measured on 73 As.
Energy Dependent Fission Product Yields
Since 2011, the LLNL-LANL-TUNL collaboration has undertaken experimental measurements of the energy evolution of the chain fission product yields (FPY) from neutron-induced fission of 235 U, 238 U, and 239 Pu using quasi-monoenergetic neutrons produced at the TUNL 10 MV Van de Graaff accelerator. Our method relies on direct, post-irradiation γ-ray spectroscopy of γ-rays emitted by fission products in actinide targets, with multiple γ-ray spectra taken continuously for a period from a half-hour to three months from the end of irradiation. The main experimental results of this study have been published for eight incident neutron energies of En = 0.58, 1.37, 2.37, 3.6, 4.6, 5.5, 8.9 and 14.8 MeV [1–4]. For each incident energy, approximately 16 cumulative FPYs were determined, nearly all being high-yield fission products, i.e., those occurring in the peaks of the mass distributions. As will be described in this report, our FPY analysis has been significantly improved in every step of the process, reducing the overall systematic uncertainties compared to previously published data.
Structure of diopside, enstatite, and magnesium aluminosilicate glasses: A joint approach using neutron and x-ray diffraction and solid-state NMR
Neutron diffraction with magnesium isotope substitution, high energy x-ray diffraction, and 29 Si, 27 Al, and 25 Mg solid-state nuclear magnetic resonance (NMR) spectroscopy were used to measure the structure of glassy diopside (CaMgSi 2 O 6 ), enstatite (MgSiO 3 ), and four (MgO) x (Al 2 O 3 ) y (SiO 2 ) 1–x–y glasses, with x = 0.375 or 0.25 along the 50 mol. % silica tie-line (1 – x – y = 0.5) or with x = 0.3 or 0.2 along the 60 mol. % silica tie-line (1 – x – y = 0.6). The bound coherent neutron scattering length of the isotope 25 Mg was remeasured, and the value of 3.720(12) fm was obtained from a Rietveld refinement of the powder diffraction patterns measured for crystalline 25 MgO. The diffraction results for the glasses show a broad asymmetric distribution of Mg–O nearest-neighbors with a coordination number of 4.40(4) and 4.46(4) for the diopside and enstatite glasses, respectively. As magnesia is replaced by alumina along a tie-line with 50 or 60 mol. % silica, the Mg–O coordination number increases with the weighted bond distance as less Mg 2+ ions adopt a network-modifying role and more of these ions adopt a predominantly charge-compensating role. 25 Mg magic angle spinning (MAS) NMR results could not resolve the different coordination environments of Mg 2+ under the employed field strength (14.1 T) and spinning rate (20 kHz). The results emphasize the power of neutron diffraction with isotope substitution to provide unambiguous site-specific information on the coordination environment of magnesium in disordered materials.
Assessment of the associated particle technique with high-resolution gamma-ray spectroscopy for in-field identification of chemical warfare agents and explosives
In this work, high-resolution prompt γ-ray neutron activation analysis (PGNAA) is performed using the associated particle (AP) technique with a deuterium-tritium neutron generator and high-purity germanium detector. Although the time resolution is inferior compared to similar systems employing fast scintillation γ-ray detectors, the strong background suppression combined with the high γ-ray energy resolution provides an important boost in sensitivity to certain key elements, especially relevant to field measurements of complex chemicals encased within thick layers of metal, such as in the case of recovered chemical warfare (CW) munitions. Results for various CW and explosive simulants contained within mock munitions are presented and compared with results obtained from traditional PGNAA measurements without the aid of the AP technique. Significant improvements in identification and discrimination between certain chemicals are achieved with the high energy resolution AP technique.
Delayed Neutron Temporal Signatures for Uranium Enrichment Measurement NA-241 SGTech (Final Report)
Nondestructive determination of uranium enrichment is a core capability for nuclear material accounting and control (NMAC) and safeguards verification measurements; however, traditional gamma spectroscopy-based techniques for enrichment measurement rely on significant assumptions of material composition and geometry, precluding their use in scenarios where a heterogeneous spatial distribution of enrichments is encountered. As an alternative, we are developing a technique to use delayed neutron temporal signatures for the measurement of uranium enrichment. Each uranium isotope has unique delayed neutron group yields, resulting in a unique delayed neutron decay time profile which can be analyzed to determine enrichment without the need for calibration sources. As part of this effort, we performed a series of measurement campaigns in which we used an active well coincidence counter (AWCC) retrofitted with commercial D-D and D-T generators to evaluate the operational characteristics of this method in response to a set of uranium enrichment and mass standards, as well as representative diversion scenarios in which either “concealed” enriched uranium is shielded by depleted uranium or declared enriched uranium is “hollowed out” and replaced with a central region of depleted uranium. A standard operating procedure and best practices were compiled to facilitate the use of delayed neutron-based enrichment measurements for international safeguards inspections.
Shape evolution in neutron-rich odd-even 105–109 Nb isotopes
Background: Neutron-rich nuclei around 𝑍 ≈ 40 are well known for exhibiting multiple shape transitions. Here, this region shows one of the sharpest shape transitions in the nuclear chart, evolving from a spherical vibrator at 𝑁 = 58 to a strongly deformed prolate shape at 𝑁 = 60. The largest deformations are observed for 38 Sr and 40 Zr . This abrupt shape transition disappears at 𝑍 = 36 and below, where a shape transition from spherical to oblate nuclei is predicted. On the other hand, for 𝑍 ≥ 42 and 𝑁 ≥ 60, the shape is known to evolve from axial to triaxial. While the even-𝑍 nuclei in this region have already been extensively studied, new insights can be gained from the studies of odd-𝑍 isotopes for a better understanding of the underlying mechanisms driving these phenomena. Purpose: The 41 Nb nuclei lie at the boundary between axially deformed Zr and triaxially deformed Mo nuclei. This work investigates the nuclear structure of very neutron-rich Nb nuclei up to 𝑁 = 68. The goal is to understand how the nuclear shape evolves as a function of isospin in this isotopic chain and provide new insights into the emergence of triaxial deformation. Methods: The structure of the neutron-rich Nb isotopes was investigated using state-of-the-art high-resolution 𝛾-ray spectroscopy of fission fragments produced via two different fission reactions. The use of 9 Be ( 238 U, 𝑓) inverse kinematics, with a detection system comprising AGATA, EXOGAM, and VAMOS++, enabled the measurement of prompt and delayed 𝛾 rays from isotopically identified fission fragments, and 𝛾−𝛾−𝛾−𝛾 highfold data were obtained from a spontaneous fission source of 252 Cf using the Gammasphere array. Results: The level scheme of 105 Nb has been significantly extended, with the addition of two negative-parity bands observed for the first time. A new level scheme is proposed for 107 Nb, which is not in agreement with an earlier measurement, and new levels and transitions have been added to the very neutron-rich 109 Nb. The degree of triaxiality of the new bands is discussed on the basis of signature splitting analysis. The recently reported level scheme of 99 Nb has been revised. Conclusions: This systematic study on the Nb isotopic chain, compared to Zr and Mo, indicates that while the ground-state band exhibits a triaxial deformation, attributed to a proton hole coupled to a triaxially deformed Mo core, the negative-parity bands, based on isomeric bandheads, display an axially symmetric deformed structure, similar to that observed in the Zr isotopes, revealing the existence of a shape coexistence in the neutron-rich Nb nuclei.