Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

630 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Determination of film thicknesses of metal oxides prepared by atomic layer deposition on SBA-15

ZrO 2 and CeO 2 films were grown in SBA-15 by Atomic Layer Deposition (ALD) to loadings of 0.92 g oxide/g SBA-15. Scanning Transmission Electron Microscopy (STEM) with Energy Dispersive Spectra (EDS) showed that the oxides grew uniformly inside the mesopores. Film thicknesses were then analyzed as a function of the number of ALD cycles using three methods: 1) mass changes assuming bulk densities for the films; 2) changes in pore size from Barret-Joyner-Halenda (BJH) analysis with N 2 adsorption isotherms; and 3) small-angle X-ray scattering (SAXS). Film thicknesses assuming bulk densities were between 6 and 8 times smaller than those obtained from BJH analysis. SAXS analysis gave film thicknesses that were approximately twice that obtained from bulk densities. Here, possible explanations of the discrepancies between these methods are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

CO 2 chirped-probe-pulse femtosecond CARS thermometry

The application of CO 2 chirped-probe-pulse (CPP) fs coherent anti-Stokes Raman scattering (CARS) for flame thermometry is discussed. A phenomenological model for CO 2 /O 2 CPP fs CARS was developed, and the simulations showed the potential for CO 2 temperature measurements free of interferences from O 2 and with no contribution from the nonresonant background by using a long-time delay for the chirped probe pulse. The accuracy and precision for CO 2 CPP fs CARS thermometry is compared with N 2 CPP fs CARS thermometry for temperatures between 295 K and 1420 K. The measurement accuracy for the CO 2 measurements is comparable with that for the N 2 measurements, while the precision for the CO 2 temperature measurements is significantly better at lower temperatures. In conclusion, we also demonstrate that accurate flame thermometry using a single set of laser parameters can be achieved using the delayed CPP approach.

42 ENGINEERING↗
DOE OSTI2026

Mechanistic Insights into Dinitrogen Reduction to Ammonia in Light-Controlled Nanocrystal:Nitrogenase Complexes

Developing systems that can efficiently capture photon energy and convert this energy into fuels and chemicals requires understanding how to assemble molecular components with diverse functions into complete systems possessing selectivity and efficiency in directing charge carriers to catalytic reactions. There are many challenges to achieving this goal. One promising approach is the development of hybrid systems that combine semiconductor nanocrystals (NCs) for light capture and enzymes as efficient catalysts. Such biohybrid systems capitalize on the tunable electronic and optical properties of NCs while leveraging the unmatched specificity and efficiency of enzymes in catalyzing chemical reactions, thereby offering opportunities to surpass the limitations of each component alone. Here, we focus on recent progress in developing a biohybrid system that combines CdS NCs for photon capture with the enzyme nitrogenase to accomplish light-driven dinitrogen (N 2 ) reduction to ammonia (NH 3 ). Integrating light-harvesting materials with biological catalysts requires a deep understanding of NC properties, protein stability, and electron transfer (ET), making it an inherently multidisciplinary problem. The reduction of N 2 to NH 3 is a challenging reaction, with a high demand in both agriculture and industrial chemical production. This reaction is intrinsically energy intensive, due to the need to activate the N≡N triple bond. The current standard industrial approach to N 2 reduction, the Haber−Bosch reaction, obtains the necessary energy input from fossil fuels, whereas biological systems capable of N 2 reduction utilize the hydrolysis of ATP as their energy source. Replacing these costly, energy-intensive inputs with renewable light energy represents a critical step toward sustainable NH 3 production. Recent progress has demonstrated that semiconductor CdS NCs can be coupled to the catalytic component of nitrogenase, the MoFe protein, to form a biohybrid CdS NC:MoFe protein complex, enabling light-driven N 2 reduction rather than energy input from fossil fuels or ATP. This illustrates how inorganic NCs can functionally replace the natural Fe protein partner, yielding a biohybrid catalyst that enables controlled electron delivery and provides not only light-driven NH 3 production but also new approaches for probing enzyme catalytic function. The CdS NC:MoFe protein biohybrid system enables light-initiated electron delivery at ambient temperature, as well as temperatures below freezing, allowing for stabilization and spectroscopic characterization of key reaction intermediates. These findings highlight how photochemical biohybrids can serve as both functional catalysts and mechanistic probes. Beyond studies of the nitrogenase mechanism, studies of the CdS NC:MoFe system reveal how variables such as NC size, electrostatic binding interactions, and sacrificial electron donors (SEDs) govern complex stability, charge transfer efficiency, and catalytic performance. In addition, studies of nitrogenase and the high activation barrier for N 2 reduction are enabling investigations of new and interesting questions regarding the properties and limitations of NC biocatalysis. In this Account, we describe the key features of CdS NC:MoFe protein biohybrids and the parameters for optimal light-driven N 2 reduction, and how controlling ET with light illuminates the path to new insights into the nitrogenase mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Heteroepitaxial Integration of ZnGeN 2 on GaN Buffers Using Molecular Beam Epitaxy

Recently theorized hybrid II-IV-N 2 /III-N heterostructures, based on current commercialized (In,Ga)N devices, are predicted to significantly advance the design space of highly efficient optoelectronics in the visible spectrum, yet there are few epitaxial studies of II-IV-N 2 materials. In this work, we present heteroepitaxial ZnGeN 2 grown on GaN buffers and AlN templates. We demonstrate that a GaN nucleating surface is crucial for increasing the ZnGeN 2 crystallization rate to combat Zn desorption, extending the stoichiometric growth window from 215 degrees C on AlN to 500 degrees C on GaN buffers. Structural characterization reveals well-crystallized films with threading dislocations extending from the GaN buffer. These films have a critical thickness for relaxation of 20-25 nm as determined by reflection high energy electron diffraction (RHEED) and cross-sectional scanning electron microscopy (SEM). The films exhibit a cation-disordered wurtzite structure, with lattice constants a = 3.216 +/- 0.004 A and c = 5.215 +/- 0.005 A determined by RHEED and X-ray diffraction (XRD). This work demonstrates a significant step toward the development of hybrid ZnGeN 2 -GaN integrated devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Local Modulation of Single-Atomic Mn Sites for Enhanced Ambient Ammonia Electrosynthesis

Rationally tuning the local structures of single-atomic active sites for the electrocatalytic N 2 reduction reaction (NRR) remains an urgent but worthwhile research topic. Herein, we accomplish the local modulation of single-atomic Mn sites and construct single Mn–O 3 N 1 sites anchored on porous carbon (Mn–O 3 N 1 /PC) by delicately controlling the Mn–O bonding conditions. Furthermore, the constructed structures are confirmed via the combination of atomic-scale imaging, Raman spectroscopy, synchrotron radiation-based soft and hard X-ray absorption spectroscopies, and X-ray photoelectron spectroscopy. The Mn–O 3 N 1 /PC catalyst yields an NH 3 yield rate of 66.41 μg h –1 mg cat. –1 (corresponding to 1.56 mg h –1 mg Mn –1 ) at -0.35 V versus reversible hydrogen electrode, which is about four times that on the control Mn–N 4 /PC catalyst. The enhanced NRR performance is ascribed to its unique geometry and electronic structures, which not only facilitate the adsorption and activation of the N 2 molecule but also lower the free energy change of the potential-determining step.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metal-Confined Synthesis of ZnS 2 Monolayer Catalysts for Dinitrogen Electroreduction

Atomically thin two-dimensional (2D) materials are of great significance in catalytic, energy storage, and electronic devices. So far, such materials are limited to several categories with layered structures. Herein, we predict an unusual atomically thin ZnS2 monolayer and exploit a metal-confined chemical vapor deposition strategy for the successful preparation of such an unprecedented 2D material, where a sulfide monolayer was first grown on metal nanosheets to form a sulfide/metal/sulfide sandwich structure, and then, the metal core was etched out to obtain freestanding sulfide monolayers. As shown in this work, the ZnS 2 monolayer possesses unique electron-deficient properties related to the atomic structure and exhibits high catalytic activity for dinitrogen electroreduction. Our work will enable creating 2D TMD materials that were previously inexistent or inaccessible.

2D Materials↗
DOE OSTI2025

Toward a Unified Kinetic Model of Nitrogenase Catalysis

The microbial enzyme nitrogenase catalyzes the MgATP-dependent reduction of N 2 to 2NH 3 , a transformation central to the global nitrogen cycle. While the canonical Thorneley−Lowe (TL) kinetic model has long served as a mechanistic framework, it does not incorporate several recent insights. Here, we present an updated kinetic model for Monitrogenase that incorporates these new findings. A significant insight is that electron transfer (ET) from the reduced Fe protein to the FeMo-cofactor is gated by MgATP-dependent conformational transitions and can be described as a probabilistic event that is dependent on the ligand bound to the active-site metallocofactor. The updated kinetic model quantitatively reproduces steady-state product formation rates across a broad range of experimental conditions, yielding revised estimates for key rate constants. It is demonstrated that under N 2 turnover, the probability of productive ET to the active site decreases by ∼60%, resulting in a significant fraction of Fe protein cycles that are unproductive for electron delivery. This mechanistic feature explains the observed rate limitation in N 2 reduction and implies a revised minimum energetic cost of approximately 25 MgATP per N 2 reduced. Integrating these new features into the revised kinetic model provides a more complete and usable foundation for understanding nitrogenase catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Carbon dioxide and nitrogen reduction reactions using 2D transition metal dichalcogenide (TMDC) and carbide/nitride (MXene) catalysts

Improving the carbon dioxide and nitrogen reduction reactions (CO 2 RR and NRR) can reduce anthropogenic greenhouse gas emissions while selectively producing chemicals needed for the fuel, plastic, and chemical industries. Efficient CO 2 RR can be used to replace fossil fuels as well as repurpose captured CO 2 , while new NRR pathways can be used to supplement or replace the energy intensive Haber–Bosch process for NH 3 generation with no CO 2 emissions. Therefore, this review article focuses on (photo)electrocatalytic and photocatalytic conversion of CO 2 and N 2 molecules into useful products, such as carbon monoxide, methanol, formic acid, and ammonia, using 2D transition metal dichalcogenides (TMDCs) and metal carbides/nitrides (MXenes). Additionally, these highly tunable 2D catalysts will be evaluated for their ability to selectively and efficiently undergo CO 2 RR and NRR by controlling defects, phases, edge sites, interfaces, and functional groups. We first address the CO 2 RR and NRR challenges, with a particular focus on theoretical mechanisms and minimum energy pathways. We follow this discussion with a detailed review of state-of-the-art 2D TMDC and MXene experimental catalysts for CO 2 RR and NRR (photo)electrocatalytic and photocatalytic reactions, and then address areas of opportunity for these catalytic reactions.

14 SOLAR ENERGY↗
DOE OSTI2022

Reaction mechanism and kinetics for N 2 reduction to ammonia on the Fe–Ru based dual-atom catalyst

Environmental and energy considerations demand that the Haber-Bosch process for reducing N 2 to NH 3 be replaced with electrochemical ammonia synthesis where the H atoms come from water instead of from H 2 . But a practical realization of electrochemical N 2 reduction reaction (NRR) requires the development of new generation electrocatalysts with low overpotential and high Faraday efficiency (FE). A major problem here is that the hydrogen evolution reaction (HER) competes with NRR. Herein, we consider new generation dual-site catalysts involving two different metals incorporated into a novel two-dimensional C 3 N–C 2 N heterostructure that provides a high concentration of well-defined but isolated active sites that bind two distinct metal atoms in a framework that facilitates electron transfer. We report here the mechanism and predicted kinetics as a function of applied potential for both NRR and HER for the (Fe–Ru)/C 3 N–C 2 N dual atom catalyst. These calculations employ the grand canonical potential kinetics (GCP-K) methodology to predict reaction free energies and reaction barriers as a function of applied potential. The rates are then used in a microkinetic model to predict the turn-over-frequencies (TOF) as a function of applied potential. At U = 0 V, the FE for NRR is 93%, but the current is only 2.0 mA cm –2 . The onset potential (at 10 mA cm –2 ) for ammonia on Fe–Ru/C 3 N–C 2 N is –0.22 V RHE . This leads to a calculated TOF of 434 h –1 per Fe–Ru site. In conclusion, we expect that the mechanisms for NRR and HER developed here will help lead to new generations of NRR with high TOF and FE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synergistic Effect of Diatomic Mo-B Site Confined in Graphene-Like C 2 N Enables Electrocatalytic Nitrogen Reduction via Novel Mechanism

Structural modulation of active site with atomic-level precision is of great importance to meet the activity and selectivity challenges that electrocatalysts are commonly facing. In this work, we have designed a metal (M) - nonmetal (NM) diatomic site embedded in graphene-like C 2 N (denoted as Mo-B@C 2 N), where electrocatalytic N 2 reduction reaction (eNRR) was thoroughly explored using density functional theory combined with computational hydrogen electrode method. Compared to M-M diatomic sites, Mo-B site can generate pronounced synergistic effect that led to eNRR proceeding via a novel quasi-dissociative reaction mechanism that has not been reported relative to the conventional enzymatic, consecutive, distal, and alternating associative mechanism. This newly uncovered mechanism in which N-N bond scission takes place immediately after the first proton-coupled electron transfer (PCET) step (i.e., *NH-*N + H + + e – ® *NH 2 *N) has demonstrated much advantage in PCET process over the four conventional mechanism in terms of thermodynamic barrier, except that the adsorption of side-on *N 2 seemed thermodynamically unfavorable (DG ads = 0.61eV). Our results have revealed that the activation of inert NºN triple bond is dominated by π*-backdonation mechanism as a consequence of charge transfers from both B and Mo site, and unexpectedly, from the substrate C 2 N itself as well. Moreover, the hybrid Mo-B diatomic site demonstrated superior performance over either Mo-Mo or B-B site for driving eNRR. Furthermore, our study could provide insight into the delicate relationships among atomic site, substrate and electrocatalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low-temperature trapping of N 2 reduction reaction intermediates in nitrogenase MoFe protein–CdS quantum dot complexes

The biological reduction of N 2 to ammonia requires the ATP-dependent, sequential delivery of electrons from the Fe protein to the MoFe protein of nitrogenase. It has been demonstrated that CdS nanocrystals can replace the Fe protein to deliver photoexcited electrons to the MoFe protein. Herein, light-activated electron delivery within the CdS:MoFe protein complex was achieved in the frozen state, revealing that all the electron paramagnetic resonance (EPR) active E-state intermediates in the catalytic cycle can be trapped and characterized by EPR spectroscopy. Prior to illumination, the CdS:MoFe protein complex EPR spectrum was composed of a S = 3/2 rhombic signal (g = 4.33, 3.63, and 2.01) consistent with the FeMo-cofactor in the resting state, E 0 . Illumination for sequential 1-h periods at 233 K under 1 atm of N 2 led to a cumulative attenuation of E 0 by 75%. This coincided with the appearance of S = 3/2 and S = 1/2 signals assigned to two-electron (E 2 ) and four-electron (E 4 ) reduced states of the FeMo-cofactor, together with additional S = 1/2 signals consistent with the formation of E 6 and E 8 states. Simulations of EPR spectra allowed quantification of the different E-state populations, along with mapping of these populations onto the Lowe–Thorneley kinetic scheme. The outcome of this work demonstrates that the photochemical delivery of electrons to the MoFe protein can be used to populate all of the EPR active E-state intermediates of the nitrogenase MoFe protein cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photosynthetic biohybrid coculture for tandem and tunable CO 2 and N 2 fixation

Solar-driven bioelectrosynthesis represents a promising approach for converting abundant resources into value-added chemicals with renewable energy. Microorganisms powered by electrochemical reducing equivalents assimilate CO 2 , H 2 O, and N 2 building blocks. However, products from autotrophic whole-cell biocatalysts are limited. Furthermore, biocatalysts tasked with N 2 reduction are constrained by simultaneous energy-intensive autotrophy. To overcome these challenges, we designed a biohybrid coculture for tandem and tunable CO 2 and N 2 fixation to value-added products, allowing the different species to distribute bioconversion steps and reduce the individual metabolic burden. This consortium involves acetogen Sporomusa ovata, which reduces CO 2 to acetate, and diazotrophic Rhodopseudomonas palustris, which uses the acetate both to fuel N 2 fixation and for the generation of a biopolyester. We demonstrate that the coculture platform provides a robust ecosystem for continuous CO 2 and N 2 fixation, and its outputs are directed by substrate gas composition. Moreover, we show the ability to support the coculture on a high–surface area silicon nanowire cathodic platform. The biohybrid coculture achieved peak faradaic efficiencies of 100, 19.1, and 6.3% for acetate, nitrogen in biomass, and ammonia, respectively, while maintaining product tunability. Finally, we established full solar to chemical conversion driven by a photovoltaic device, resulting in solar to chemical efficiencies of 1.78, 0.51, and 0.08% for acetate, nitrogenous biomass, and ammonia, correspondingly. Ultimately, our work demonstrates the ability to employ and electrochemically manipulate bacterial communities on demand to expand the suite of CO 2 and N 2 bioelectrosynthesis products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

N 2 vibrational excitation in atmospheric pressure ns pulse and RF plasma jets

Time-resolved N 2 vibrational temperature and translational–rotational temperature in quasi-two-dimensional atmospheric pressure plasma jets sustained by ns pulse and RF discharges in nitrogen/noble gas mixtures are measured by the broadband vibrational Coherent Anti-Stokes Raman Scattering (CARS) . The results indicate a much stronger vibrational excitation in the RF plasma jet, due to the lower reduced electric field and higher discharge power. In a ns pulse discharge in N 2 /He, N 2 vibrational temperature is significantly lower compared to that in N 2 /Ar, due to the more rapid vibration–translation (V–T) relaxation of nitrogen by helium atoms. In the RF plasma jets in N 2 /Ne and N 2 /Ar, the vibrational excitation increases considerably as the nitrogen fraction in the mixture is reduced. The experimental data in the RF plasma jet in N 2 /Ar jet are compared with the kinetic modeling predictions. The results indicate that nitrogen vibrational excitation in N 2 /Ar plasma jets with a small N 2 fraction in the mixture (several percent) is controlled primarily by electron impact, anharmonic vibration–vibration (V–V) pumping, and V–T relaxation by N atoms. In comparison, V–V energy transfer from the vibrationally excited molecules in the first excited electronic state, N 2 (A 3 Σ u + , v), which are generated primarily by the energy transfer from the metastable Ar atoms, has a minor effect on the vibrational populations of the ground electronic state, N 2 (X 1 Σ g + , v). Although the discharge energy fraction going to electronic excitation is significant, the predicted quasi-steady-state N 2 (A 3 Σ u + ) number density, controlled by the energy pooling and quenching by N atoms, remains relatively low. Because of this, the net rate of N 2 (X 1 Σ g + ) vibrational excitation by the V–V energy transfer from N 2 (A 3 Σ u + ) is much lower compared to that by the direct electron impact. Furthermore, the results show that atmospheric pressure RF plasma jets can be used as sources of highly vibrationally excited N 2 molecules and N atoms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Molecular beam mass spectrometry measurements of vibrationally excited N 2 in the effluent of an atmospheric plasma jet: a comparison with a state-to-state kinetic model

Vibrationally excited N 2 molecules are suggested to be one of the possible key species responsible for the observed synergistic effects in plasma catalysis for NH 3 synthesis. To assess the impact of vibrationally excited species in plasma-catalysis, quantitative measurements near interfaces are required, which remains challenging. In this letter, we report spatially resolved measurements of vibrationally excited N 2 in the effluent of an atmospheric pressure plasma jet by molecular beam mass spectrometry (MBMS). The mass spectrometry signals as a function of electron energy of the ionizer were fitted with the effective electron-impact ionization cross section of N 2 (v) considering the vibrational distribution function as determined by a detailed vibrational level resolved plasma kinetic calculation. Here, the reported method presented in this letter shows the capability of MBMS to measure vibrationally excited species of N 2 near interfaces when the vibrational distribution function is known or assumed and shows excellent agreement with state-to-state kinetic models of N 2 (v).

42 ENGINEERING↗
DOE OSTI2023

Design of InGaN-ZnSnGa 2 N 4 quantum wells for high-efficiency amber light emitting diodes

A novel type-II InGaN-ZnSnGa 2 N 4 quantum well (QW) structure is proposed based on recent experimental achievements for the successful epitaxy of ZnSnN 2 -GaN alloys and the determination of their band offsets with GaN. The simulation results indicate that this structure is promising as the active region for high-efficiency InGaN-based amber (λ ~ 590 nm) light-emitting diodes (LEDs). The hole wavefunction in the valence band is better confined with the insertion of a monolayer scale of ZnSnGa 2 N 4 into the InGaN QW while the electron wavefunction in the conduction band is better confined with the incorporation of an AlGaN layer in the GaN quantum barrier. The band structure of the InGaN-ZnSnGa 2 N 4 QW is numerically simulated based on the experimentally measured band offsets between ZnSnGa 2 N 4 and GaN. With the InGaN-ZnSnGa 2 N 4 QW design, a low In content (20%) is required in the InGaN layer to reach a peak emission wavelength of ~590 nm, yet an In composition of 25% is needed to reach the same emission wavelength for a conventional InGaN QW with the same layer thicknesses. Moreover, the electron-hole wavefunction overlap (Гe1-hh1) for the InGaN-ZnSnGa 2 N 4 QW design reaches 18% for an emission wavelength at ~590 nm. This result is much improved over the conventional InGaN QW overlap of 5% emitting at the same wavelength. The increase in electron-hole wavefunction overlap results in an approximately 14 times enhancement in the predicted spontaneous emission radiative recombination rate of the InGaN-ZnSnGa 2 N 4 QW as compared to that of the conventional InGaN QW. This InGaN-ZnSnGa 2 N 4 QW structure design can be promising to pave a new way to achieve high efficiency amber LEDs.

42 ENGINEERING↗
DOE OSTI2020

Unconventional Catalytic Approaches to Ammonia Synthesis

Ammonia is a critically important industrial chemical and is largely responsible for sustaining the growing global population. To provide ammonia to underdeveloped regions and/or regions far from industrial production hubs, modular systems have been targeted and often involve unconventional production methodologies. These novel approaches for ammonia production can tap renewable resources at smaller scales located at the point of use, while decreasing the CO 2 footprint. Plasma-assisted catalysis and electrochemical ammonia synthesis have promise owing to their atmospheric pressure and low-temperature operation conditions and the ability to construct units at scales desired for modularization. Fundamental and applied studies are underway to assess these processes, although many unknowns remain. In this review, we discuss recent developments and opportunities for unconventional ammonia synthesis with a focus on plasma-stimulated systems.

42 ENGINEERING↗