Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiplicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Proton interactions with high multiplicity

Project Thermalization is aimed to study the proton-proton interaction with high multiplicity of secondary particles. The region of high multiplicity is especially actual at present. We expect the manifestation of the secondary particle collective behavior at this region. The experimentally measured topological cross section was corrected for apparatus acceptance and detection efficiency. These data are in good agreement with gluon dominance model. The comparison with other models is also done and shows no essential deviations. There is evidence that Bose-Einstein condensation can formed at high total multiplicity region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Synthesis of Carbon Dots with Multiple Color Emission by Controlled Graphitization and Surface Functionalization

Multiple-color-emissive carbon dots (CDots) have potential applications in various fields such as bioimaging, light-emitting devices, and photocatalysis. The majority of the current CDots to date exhibit excitation-wavelength-dependent emissions with their maximum emission limited at the blue-light region. In this paper, a synthesis of multiple-color-emission CDots by controlled graphitization and surface function is reported. The CDots are synthesized through controlled thermal pyrolysis of citric acid and urea. By regulating the thermal-pyrolysis temperature and ratio of reactants, the maximum emission of the resulting CDots gradually shifts from blue to red light, covering the entire light spectrum. Specifically, the emission position of the CDots can be tuned from 430 to 630 nm through controlling the extent of graphitization and the amount of surface functional groups, –COOH. The relative photoluminescence quantum yields of the CDots with blue, green, and red emission reach up to 52.6%, 35.1%, and 12.9%, respectively. Furthermore, it is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices. Finally, this research opens a door for developing low-cost CDots as alternative phosphors for light-emitting devices.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Insights into ionic transport and structural changes in magnetite during multiple-electron transfer reactions

Metal oxides, such as Fe 3 O 4 , hold promise for future battery applications due to their abundance, low cost, and opportunity for high lithium storage capacity. In order to better understand the mechanisms of multiple-electron transfer reactions leading to high capacity in Fe 3 O 4 , a comprehensive investigation on local ionic transport and ordering is made by probing site occupancies of anions (O 2– ) and cations (Li + , Fe 3+ /Fe 2+ ) using multiple synchrotron X-ray and electron-beam techniques, in combination with ab-initio calculations. Results from this study provide the first experimental evidence that the cubic-close-packed (ccp) O-anion array in Fe 3 O 4 is sustained throughout the lithiation and delithiation processes, thereby enabling multiple lithium intercalation and conversion reactions. Cation displacement/reordering occurs within the ccp O-anion framework, which leads to a series of phase transformations, starting from the inverse spinel phase and turning into intermediate rock-salt-like phases (Li x Fe 3 O 4 ; 0 < x < 2), then into a cation-segregated phase (Li 2 O•FeO), and finally converting into metallic Fe and Li 2 O. Subsequent delithiation and lithiation processes involve interconversion between metallic Fe and FeO-like phases. Lastly, these results may offer new insights into the structure-determined ionic transport and electrochemical reactions in metal oxides, and those of other compounds sharing a ccp anion framework, reminiscent of magnetite.

25 ENERGY STORAGE↗
DOE OSTI2024

Multiple Functional Bonds Integrated Interphases for Long Cycle Sodium-Ion Batteries

Sodium-ion batteries (SIBs) have garnered significant interest as one of the most promising energy suppliers for power grid energy storage. However, the poor electrode/electrolyte interfacial stability leads to continual electrolyte decomposition and transition metal dissolution, resulting in rapid performance degradation of SIBs. In this work, we propose a strategy integrating multiple functional bonds to regulate electrode/electrolyte interphase by triple-coupling of succinonitrile (SN), sodium hexafluorophosphate (NaPF 6 ) and fluorinated ethylene carbonate (FEC). Theoretical calculation and experiment results show that the solvation structure of Na + and ClO 4 – is effectively reconfigured by the solvated FEC, SN and PF 6 – in PC-based carbonate electrolyte. The newly developed electrolyte demonstrates increased Na + -FEC coordination, weakened interaction of Na + -PC and participation of SN and PF 6 – anions in solvation, resulting in the formation of a conformal interfacial layer comprising of sodium oxynitrides (NaN x O y ), sodium fluoride (NaF) and phosphorus oxide compounds (NaP x O y ). Consequently, a 3 Ah pouch full cell of hard carbon//NaNi 1/3 Fe 1/3 Mn 1/3 O 2 exhibits an excellent capacity retention of 90.4 % after 1000 cycles. Detailed postmortem analysis of interface chemistry is further illustrated by multiple characterization methods. Finally, this study provides a new avenue for developing electrolyte formulations with multiple functional bonds integrated interphases to significantly improve the long-term cycling stability of SIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

3D Coded SUMMA: Communication-Efficient and Robust Parallel Matrix Multiplication

In this paper, we propose a novel fault-tolerant parallel matrix multiplication algorithm called 3D Coded SUMMA that achieves higher failure-tolerance than replication-based schemes for the same amount of redundancy. This work bridges the gap between recent developments in coded computing and fault-tolerance in high-performance computing (HPC). The core idea of coded computing is the same as algorithm-based fault-tolerance (ABFT), which is weaving redundancy in the computation using error-correcting codes. In particular, we show that MatDot codes, an innovative code construction for parallel matrix multiplications, can be integrated into three-dimensional SUMMA (Scalable Universal Matrix Multiplication Algorithm [30]) in a communication-avoiding manner. To tolerate any two node failures, the proposed 3D Coded SUMMA requires ~50% less redundancy than replication, while the overhead in execution time is only about 5–10%.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Rich methane oxidation on Pt/Pd/Al 2 O 3 : Steady state performance, multiplicity features, and spatial patterns

Performance features are reported for the catalytic sub-stoichiometric (rich) oxidation of methane on a Pt + Pd/ Al 2 O 3 washcoated monolith over a range of feed temperatures and O 2 /CH 4 for both dry and wet feeds. Near isothermal steady state multiplicity and co-existing states with different methane conversions are presented. The methane conversion vs. O 2 feed concentration consists of a higher conversion regime at lower concentrations and a lower conversion, inhibited regime at higher concentration. Here, the conversion maximum is accompanied by an overlap of the two regimes in the form of a clockwise hysteresis loop. Spatial concentration profiles for the dry feed reveal an upstream oxidation zone and downstream stream reforming zone. Measurements extending beyond the catalyst imply the co-existence of active and inhibited states. Addition of water promotes oxidation and steam reforming while the multiplicity and nonuniform states persist. Underlying mechanistic aspects responsible for the inhibition, rate multiplicity and co-existing states are discussed.

03 NATURAL GAS↗
DOE OSTI2010

Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines

A comprehensive investigation was carried out in order to better understand the combustion behaviour in a low compression ratio DI Diesel engine when multiple injection strategies are applied just after the engine cold starts in low temperature conditions (idling). More specifically, the aim of this study was twofold: on one hand, to understand the effect of the multiple injection strategies on the indicated mean effective pressure; on the other hand, to contribute to the understanding of combustion stability characterized by the coefficient of variation of indicated mean effective pressure. The first objective was fulfilled by analyzing the rate of heat release obtained by in-cylinder pressure diagnosis. The results showed that the timing of the pilot injection closest to the main injection was the most influential parameter based on the behaviour of the rate of heat release (regardless of the multiple injection strategy applied). For the second objective, the combustion stability was found to be correlated with the combustion centroid angle. The results showed a trend between them and the existence of a range of centroid angles where the combustion stability is strong enough. In addition, it was also evident that convenient split injection allows shifting the centroid to such a zone and improves combustion stability after start. (author)

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2016

Fast estimation of dense gas dispersion from multiple continuous CO 2 surface leakage sources for risk assessment

Surface leakage of CO 2 , and associated potential impacts on health, safety, and the environment (HSE) are considered hazards of geologic carbon sequestration (GCS). There are two challenges associated with impact assessment of CO 2 surface dispersion. First, the fact that CO 2 is a dense gas makes its dispersion in air a complex process. Rigorous numerical solutions for modeling concentration distributions are relatively time-consuming. Second, impact assessment requires consideration of uncertainty, e.g., quantification of how much uncertainty is propagated through input parameters to model outputs by carrying out large numbers of model runs. In order to assess the potential consequences of surface leakage of CO 2 , it is useful to have a model that executes very quickly for repeated model calculations (e.g., in Monte Carlo mode) of the atmospheric dispersion of CO 2 (concentrations as a function of space and time). In addition, the model should be able to handle multiple surface leakage sources. In this work, we have extended the nomograph approach of Britter and McQuaid (1988) for estimating dense gas plume length from single leakage source to multiple leakage sources. The method is very fast and therefore amenable to general system-level GCS risk assessment including uncertainty quantification within the framework of the National Risk Assessment Partnership (NRAP) Integrated Assessment Model (IAM). The method is conservative in that it assumes the wind could be from any direction, and it handles multiple sources by a simple superposition approach. The method produces results in reasonable agreement with a sophisticated computational fluid dynamics (CFD) code, but runs in a small fraction of the time.

58 GEOSCIENCES↗
DOE OSTI2011

Optimized {gamma}-Multiplicity Based Spin Assignments of s-Wave Neutron Resonances

The multiplicity of -ray emission following neutron capture at isolated resonances carries valuable information on the resonance spin. Several methods utilizing this information have been developed. The latest method was recently introduced for analyzing the data from time-of-flight measurements with 4 -calorimetric detection systems. The present paper describes a generalization of this method. The goal is the separation of the -emission yields belonging to the two neutron capturing state spins of isolated (or even unresolved) s-wave neutron resonances on targets with non-zero spin. The formalism for performing this separation is described and then tested on artificially generated data. This new method was applied to the -multiplicity data obtained for the 147Sm(n, )148Sm reaction using the DANCE detector system at the LANSCE facility at Los Alamos National Laboratory. The analyzing power of the upgraded method is supported by combined dicebox and geant4 simulations of the fluctuation properties of the multiplicity distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Characterizations of double pulsing in neutron multiplicity and coincidence counting systems

Passive neutron coincidence/multiplicity counters are subject to non-ideal behavior, such as double pulsing and dead time. It has been shown in the past that double-pulsing exhibits a distinct signature in a Rossi-alpha distribution, which is not readily noticed using traditional Multiplicity Shift Register analysis. But, it has been assumed that the use of a pre-delay in shift register analysis removes any effects of double pulsing. Here, we use high-fidelity simulations accompanied by experimental measurements to study the effects of double pulsing on multiplicity rates. By exploiting the information from the double pulsing signature peak observable in the Rossi-alpha distribution, the double pulsing fraction can be determined. Algebraic correction factors for the multiplicity rates in terms of the double pulsing fraction have been developed. We also discuss the role of these corrections across a range of scenarios.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Estimating the mass variance in neutron multiplicity counting $-$ A comparison of approaches

In the standard practice of neutron multiplicity counting, the first three sampled factorial moments of the event triggered neutron count distribution are used to quantify the three main neutron source terms: the spontaneous fissile material effective mass, the relative (α,n) production and the induced fission source responsible for multiplication. This study compares three methods to quantify the statistical uncertainty of the estimated mass: the bootstrap method, propagation of variance through moments, and statistical analysis of cycle data method. Each of the three methods was implemented on a set of four different NMC measurements, held at the JRC-laboratory in Ispra, Italy, sampling four different Pu samples in a standard Plutonium Scrap Multiplicity Counter (PSMC) well counter.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Experimental evaluation of the extended Dytlewski-style dead time correction formalism for neutron multiplicity counting

Over the past few decades, neutron multiplicity counting has played an integral role in Special Nuclear Material (SNM) characterization pertaining to nuclear safeguards. Current neutron multiplicity analysis techniques use singles, doubles, and triples count rates because a methodology to extract and dead time correct higher order count rates (i.e. quads and pents) was not fully developed. This limitation is overcome by the recent extension of a popular dead time correction method developed by Dytlewski. This extended dead time correction algorithm, named Dytlewski-Croft-Favalli (DCF), is detailed in reference Croft and Favalli (2017), which gives an extensive explanation of the theory and implications of this new development. Dead time corrected results can then be used to assay SNM by inverting a set of extended point model equations which as well have only recently been formulated. Here, we discuss and present the experimental evaluation of practical feasibility of the DCF dead time correction algorithm to demonstrate its performance and applicability in nuclear safeguards applications. In order to test the validity and effectiveness of the dead time correction for quads and pents, 252 Cf and SNM sources were measured in high efficiency neutron multiplicity counters at the Los Alamos National Laboratory (LANL) and the count rates were extracted up to the fifth order and corrected for dead time. To assess the DCF dead time correction, the corrected data is compared to traditional dead time correction treatment within INCC. In conclusion, the DCF dead time correction is found to provide adequate dead time treatment for broad range of count rates available in practical applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Event-by-event neutron–photon multiplicity correlations in 252Cf(sf)

Excited nuclear fragments are emitted during nuclear fission. The de-excitation of these fission fragments takes place as sequential emission of neutrons followed by photons. A correlation between neutron and photon multiplicities accompanying fission is thus expected. Fission event generators based on established statistical nuclear physics models predict a negative event-by-event correlation in neutron-photon multiplicity. A survey of published experimental results of an event-by-event covariance between the neutron - photon multiplicities emitted following the spontaneous fission of 252 Cf is presented. Analytic unfolding expressions are developed in this work to determine the bias introduced by background sources, particle misclassification, pulse pileup, and inelastic photon production. The published experimental data are re-analyzed using these unfolding techniques and are found to be in qualitative agreement with the predictions of model-based calculations. Finally, in particular, we have concluded that there exists a significant event-by-event neutron-photon emission competition following the spontaneous fission of 252 Cf.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

At-power subcritical multiplication in the advanced test reactor

The degree to which a given physical subdivision of a critical reactor acts as a neutron source for other lobes is not analytically characterized for general application. ATR and ATRC both operate at power, and individual power-producing lobes rely on each other as neutron sources in order to maintain constant power, which in general requires either exactly critical multiplication within a reactor or an external neutron source. Here, this work shows that lobe powers in ATR or ATRC can be related with subcritical multiplication theory, demonstrating that the lobes are not individually critical. This explanation is significant for ATR due to the desire to irradiate a large variety of experiments simultaneously, each having its impact on the core neutron population. This work also establishes the lack of relationship between experiment reactivity worth and cross-sections calculated from fundamental nuclear data. For any physical subdivision of any other critical reactor, it is likewise true that the subdivision undergoes only subcritical multiplication.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Unified framework for heavy flavor and quarkonium production in high multiplicity p+p and p+A collisions at RHIC and LHC

We discuss the production of $D$-mesons and $J/\psi$ in high multiplicity proton-proton and proton-nucleus collisions within the Color-Glass-Condensate (CGC) framework. We demonstrate that the modification of the LHC data on $D$ and $J/\psi$ yields in high multiplicity events relative to minimum bias events arise from a significant enhancement of the gluon saturation scales of the corresponding rare parton configurations in the colliding protons and nuclei. For a given event multiplicity, we predict these relative yields to be energy independent from $\sqrt{s}=200$ GeV at RHIC to the highest LHC energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

Multithreaded sparse matrix-matrix multiplication for many-core and GPU architectures

Sparse matrix-matrix multiplication is a key kernel that has applications in several domains such as scientific computing and graph analysis. Several algorithms have been studied in the past for this foundational kernel. In this work, we develop parallel algorithms for sparse matrix-matrix multiplication with a focus on performance portability across different high performance computing architectures. The performance of these algorithms depend on the data structures used in them. We compare different types of accumulators in these algorithms and demonstrate the performance difference between these data structures. Furthermore, we develop a meta-algorithm, kkSpGEMM, to choose the right algorithm and data structure based on the characteristics of the problem. We show performance comparisons on three architectures and demonstrate the need for the community to develop two phase sparse matrix-matrix multiplication implementations for efficient reuse of the data structures involved.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Effect of multiple scattering on Cerenkov radiation from energetic electrons

Cerenkov radiation can be used as a diagnostic tool to study energetic electrons generated in ultra-intense laser matter interactions. However, electrons suffer scattering with nuclei as they move in a medium. In this article, we theoretically study the effect of multiple scattering on Cerenkov radiation, and obtain analytical formulas under some circumstances. The results show that when the speed of an energetic electron is not close to the light speed in the medium, Cerenkov radiation is just slightly decreased due to multiple scattering. In the case that the electron speed is very close to the light speed in the medium, the effect of multiple scattering becomes significant, and the radiation is dominated by bremsstrahlung.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2019

Theoretical limits of multiple exciton generation and singlet fission tandem devices for solar water splitting

Photoelectrochemical (PEC) water splitting is one of the most important approaches being investigated for solar fuel generation. In this study, we determine the maximum thermodynamic power conversion efficiencies (PCEs) of PEC water splitting two-bandgap tandem devices that produce multiple carriers per photon absorbed via Multiple Exciton Generation (MEG) or Singlet Fission (SF) and in the presence of solar concentration. Here, we employ a detailed balance thermodynamic analysis to determine the effects of top cell thickness, solar concentration, carrier multiplication, electrode overvoltage (VO), and water absorption on PEC power conversion efficiency for water splitting cells. We have found a maximum PEC power conversion efficiency of 62.9% in cells using two ideal tandem MEG absorbers with bandgaps of 0.3 and 1.2 eV at 1000-suns solar concentration and 0 overvoltage; the maximum PCE for two tandem SF absorbers under the same conditions is nearly the same at 59% with the same values for the absorption thresholds. A very interesting and important result was that, upon thinning the top cell, the range of viable bandgaps for both the top and bottom cells is extended by as much as 0.5-1 eV while still maintaining high maximum conversion efficiency (60-63%). The effects of imposing different solar concentrations from 1X to 1000X and having different tandem configurations of SF and MEG layers were also studied.

14 SOLAR ENERGY↗