Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model of Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Advancing Building Air Leakage Measurement and Modeling: Measurement of Interior Air Leaks, Experimental Comparison to Conventional Methods, and Building Modeling Characteristics

This report, Advancing Building Air Leakage Measurement and Modeling: Measurement of Interior Air Leaks, Experimental Comparison to Conventional Methods, and Building Modeling Characteristics, developed two new building air leakage measurement methods, experimentally evaluated the performance in comparison to conventional methods, experimentally evaluated the behavior of leaks for specific crack structures, and identified testing constraints and model implications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Evaluation of a Reduced-Order Model for IBR Fault Response Representation via OEM Blackbox Models

This paper presents a fully implemented inverter reduced-order-model (ROM) in an EMT simulation (PSCAD) library component for direct user utilization in protection studies. The developed inverter ROM has the following features: Equivalent to a full inverter-based resource (IBR) inverter model with positive- and negative-sequence current formulation and representation. A Python script is developed to fully automate this process, including training data generation, ROM parameter training, updating parameters, and model verification and validation. The ROM is validated using both IEEE 2800-compliant and non-compliant OEM modes in a real-world system, building confidence of its usability by protection engineers.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Surrogate Model Based Optimization for Finding Robust Deep Learning Model Architectures

Deep Learning (DL) models are increasingly used throughout the sciences. However, their performance and usefulness depend greatly on their architecture which is defined by hyperparameters such as the number of nodes, layers, the learning rate, etc. Tuning these hyperparameters is time-consuming because evaluating their performance requires a lengthy training step. Stochastic optimizers used in training lead to performance variability and potentially prediction reliability issues. In this talk, we will describe an automated optimization method based on surrogate models and active learning strategies for tuning DL model architectures. We take into account the prediction variability with the goal to identify architectures that make reliable and robust predictions. We demonstrate our developments on an application arising in particle physics.

deep learning↗
DOE OSTI2021

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, for unscheduled two hour injection at 133 % designed capacity, on fine scale grid, with some results. Second simulation of J.T. Smith, E. Sonnenthal, P. Dobson, P. Nico, and M. Worthington, 2021. Thermal-hydrological-mechanical modeling of Stockton University reservoir cooling system, Proceedings of the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, SGP-TR-218, from which Figures 6-9, pertain.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Organizational System Resilience to Disinformation: A Viable Systems Model Exploration

This paper explores the utility of organizational system modeling frameworks to provide valuable insight into information flows within organizations and subsequently the opportunities for increasing resilience against disinformation campaigns targeting the system's ability to utilize information within its decision making. Disinformation is a growing challenge for many organizations and in recent years has created delay in decision making. Here the paper has utilized the viable systems model (VSM) to characterize organizational systems and used this approach to outline potential subsystem requirements to promote resilience of the system. The results of this paper can support the development of simulations and models considering the human elements within the system as well as support the development of quantitative measures of resilience.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2026

Multi-task Parallelism for Robust Pre-training of Graph Foundation Models on Multi-source, Multi-fidelity Atomistic Modeling Data

Graph foundation models using graph neural networks promise sustainable, efficient atomistic modeling. To tackle challenges of processing multi-source, multi-fidelity data during pre-training, recent studies employ multi-task learning, in which shared message passing layers initially process input atomistic structures regardless of source, then route them to multiple decoding heads that predict data-specific outputs. This approach stabilizes pre-training and enhances a model’s transferability to unexplored chemical regions. Preliminary results on approximately four million structures are encouraging, yet questions remain about generalizability to larger, more diverse datasets and scalability on supercomputers. We propose a multi-task parallelism method that distributes each head across computing resources with GPU acceleration. Implemented in the open-source HydraGNN architecture, our method was trained on over 24 million structures from five datasets and tested on the Perlmutter, Aurora, and Frontier supercomputers, demonstrating efficient scaling on all three highly heterogeneous super-computing architectures.

Lupo Pasini, Massimiliano [ORNL] (ORCID:0000000249↗
DOE OSTI2020

A Potts Model parameter study of particle size, Monte Carlo temperature, and “Particle-Assisted Abnormal Grain Growth”

A Potts Model was proposed to account for temperature and particle heterogeneity-dependent Zener Pinning. This was accomplished by relating the random fluctuations of grain boundary position allowed by the Potts Model switching probability at finite simulation temperature to experimentally observed grain growth stagnation behavior. We assume that these fluctuations arise from random fluctuations in the thermodynamic and kinetic properties of the grain boundaries and/or interfaces as they change with temperature. As an application of this model, the grain growth kinetics of U-10 wt. % Mo nuclear fuels were simulated with the input of microstructural images during different heat treatment processes. Simulated average grain growth behavior is in good agreement with experiments.

Frazier, William E.↗
DOE OSTI2022

Thermodynamic modeling of aqueous lithium salt solutions with association electrolyte nonrandom two-liquid activity coefficient model

The high charge density of lithium ion and the resulting strong association phenomena make thermodynamic modeling of aqueous lithium electrolyte solutions extremely challenging. In this study, the association electrolyte nonrandom two-liquid activity coefficient model of Lin et al. (AIChE J. 2022, 68(2), e17422) is utilized to correlate and predict thermodynamic properties and solubility behavior of aqueous single electrolyte solutions of LiCl, LiBr, LiI, and LiNO 3 , and their mixed electrolyte solutions. Capturing self-association of water, cross-association of ion and water for hydration, and cross-association of cation and anion for ion-pairing, the association model accurately represents the literature experimental data up to saturation concentrations and at the temperature ranging from 263 K to 523 K. Here, this study further investigated the effect of anions of the lithium salts, and re-confirmed that the order of solution non-ideality as LiI > LiBr > LiCl > LiNO 3 because the anions with stronger association strengths are more likely to form ion pairs and thus lower the mean ionic activity coefficients.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Measurement-driven, model-based estimation of residual stress and its effects on fatigue crack growth. Part 1: Validation of an eigenstrain model

The objective of this paper is to validate a measurement-driven, model-based approach to estimate residual stress (RS) in samples machined from quenched aluminum stock. Model input is derived from measurement of RS in the parent stock. Validation is performed for prismatic T-sections removed from bars at different locations. We find RS predicted agrees with RS measured, by contour and neutron diffraction methods, with root-mean-square model-measurement difference of 22 MPa. Follow-on work (in Part 2) applies the RS estimation to samples representative of aircraft structures and examines the effects of RS on fatigue crack growth in the RS-bearing samples.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Model-based and Model-free Designs for an Extended Continuous-time LQR with Exogenous Inputs

We present an extended linear quadratic regulator (LQR) design for continuous-time linear time-invariant (LTI) systems in the presence of exogenous inputs. We first propose a model-based solution with cost minimization guarantees for states and inputs using dynamic programming (DP). The control law consists of a combination of the optimal state feedback and an additional optimal term dependent on the exogenous inputs. The control gains for the two components are obtained by solving a set of matrix differential equations. We provide these solutions for both finite horizons and steady-state cases. In the second part of the paper, we formulate a reinforcement learning (RL) based algorithm which does not need any model information except the input matrix, and can compute an approximate steady-state LQR gain using measurements of the states, the control inputs, and the exogenous inputs. Both model-based and data-driven optimal control algorithms are tested with a numerical example under different exogenous inputs showcasing the effectiveness of the designs.

Mukherjee, Sayak↗
DOE OSTI2023

The Potential Role for New Nuclear in the U.S. Power System: A View from Electricity System Modelers

There are diverse views on the role nuclear power might play in a decarbonized energy system, with some vocal viewpoints suggesting nuclear should either have no role or that nuclear should be a key pillar. Here we present a perspective on the role of nuclear power based on our collective experience in modeling nuclear power within the decarbonized U.S. power systems. We summarize the costs of current reactor development projects, and compare their stated costs with the costs that our models indicate is necessary in order to see deployment of new nuclear. We also discuss aspects of new nuclear deployment that are not included in our models but can influence decisions about whether to invest in new nuclear capacity.

decarbonization↗
DOE OSTI2020

Anisotropic Motions of Fibrils Dictated by Their Orientations in the Lamella: A Coarse-Grained Model of a Plant Cell Wall

Plant cell walls are complex systems that exhibit the characteristics of both rigid and soft material depending on their external perturbations. The three main polymeric components in a plant primary cell wall are cellulose fibrils, hemicellulose, and pectins. These components interact in a hierarchical fashion giving rise to mesoscale structural features such as cellulose bundles, lamella stacking, and so on. Although several studies have focused on understanding these unique structural features, a clear picture linking them to cell wall mechanics is still lacking. As a first step toward this goal, a phenomenological model of plant cell wall has been developed in this work by using available experimental data to investigate the underlying connections between mesoscale structural features and the motions of fibrils during deformation. In this model cellulose fibrils exhibit motions such as angular reorientations and kinking upon forced stretching. Furthermore, these motions are dependent on the orientation of fibrils with respect to the stretch direction, i.e., fibrils that are at an angle to the stretch direction exhibit predominant angular reorientations, while fibrils transverse to the stretch direction undergo kinking as a result of transverse compression. Varying the chain length of pectin had negligible effects on these motions. One of the main contributions from this work is the development of a simple model that can be easily fine-tuned to test other hypotheses and extended to include additional experimental knowledge about the structural aspects of cell walls in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Neural Network Water Model Based on the MB-Pol Many-Body Potential

The MB-pol many-body potential accurately predicts many properties of water, including cluster, liquid phase, and vapor–liquid equilibrium properties, but its high computational cost can make applying it in large-scale simulations quite challenging. Here, in order to address this limitation, we developed a “deep potential” neural network (DPMD) model based on the MB-pol potential for water. We find that a DPMD model trained on mostly liquid configurations yields a good description of the bulk liquid phase but severely underpredicts vapor–liquid coexistence densities. By contrast, adding cluster configurations to the neural network training set leads to a good agreement for the vapor coexistence densities. Liquid phase densities under supercooled conditions are also represented well, even though they were not included in the training set. These results confirm that neural network models can combine accuracy and transferability if sufficient attention is given to the construction of a representative training set for the target system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Important ice processes are missed by the Community Earth System Model (CESM) in Southern Ocean mixed–phase clouds: Bridging SOCRATES observations to model developments

Global climate models (GCMs) are challenged by difficulties in simulating cloud phase and cloud radiative effect over the Southern Ocean (SO). Some of the new generation GCMs predict too much liquid and too little ice in mixed-phase clouds. This misrepresentation of cloud phase in GCMs results in weaker negative cloud feedback over the SO and a higher climate sensitivity. Based on a model comparison with observational data obtained during the Southern Ocean Cloud Radiation and Aerosol Transport Experimental Study (SOCRATES), this study addresses a key uncertainty in the Community Earth System Model version 2 (CESM2) related to cloud phase, namely ice formation in pristine remote SO clouds. It is found that sea spray organic aerosols (SSOA) are the most important type of ice nucleating particles (INPs) over the SO with concentrations one order of magnitude higher than those of dust INPs based on measurements and CESM2 simulations. Secondary ice production (SIP) which includes riming splintering, rain droplet shattering, and ice-ice collisional fragmentation as implemented in CESM2 is the dominant ice production process in moderately cold clouds with cloud temperatures greater than –20°C. SIP enhances the in-cloud ice number concentrations (Ni) by 1-3 orders of magnitude and predicts more mixed-phase (with percentage occurrence increased from 15% to 21%), in better agreement with the observations. Finally, this study highlights the importance of accurately representing cloud phase over the pristine remote SO by considering the ice nucleation of SSOA and SIP processes, which are currently missing in most GCM cloud microphysics parameterizations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Exposing Process‐Level Biases in a Global Cloud Permitting Model With ARM Observations

The emergence of global convective‐permitting models (GCPMs) represents a significant advancement in climate modeling, offering improved representation of deep convection and complex precipitation patterns. In this study, we evaluate the performance of the Simple Cloud‐Resolving E3SM Atmosphere Model (SCREAM) using its doubly periodic configuration (DP‐SCREAM) against large eddy simulations and modern observational data sets from the Atmospheric Radiation Measurement program. We introduce several new transitional cloud regime cases, such as the transition from shallow to deep convection and from stratocumulus to cumulus, as well as cold‐air outbreak scenarios. The results reveal both strengths and limitations of SCREAM, particularly in the accurate simulation of cloud transitions and midlevel convection, with varying degrees of sensitivity to horizontal and vertical resolution. Despite improvements at higher resolutions, key biases remain, including the abrupt transition from shallow to deep convection and the lack of congestus clouds. These findings underscore the need for further refinement in turbulence parameterizations and vertical grid resolution in GCPMs.

Bogenschutz, Peter A. [Lawrence Livermore National↗