Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Carbonate Mineralization of Volcanic Province Basalts

Flood basalts are receiving increasing attention as possible host formations for geologic sequestration of anthropogenic CO2, with studies underway in the United States, India, Iceland, and Canada. As an extension of our previous experiments with Columbia River basalt, basalts from the eastern United States, India, and South Africa were reacted with aqueous dissolved CO2 and aqueous dissolved CO2-H2S mixtures under supercritical CO2 (scCO2) conditions to study the geochemical reactions resulting from injection of CO2 in such formations. The results of these studies are consistent with cation release behavior measured in our previous experiments (in press) for basalt samples tested in single pass flow through dissolution experiments under dilute solution and mildly acidic conditions. Despite the basalt samples having similar bulk chemistry, mineralogy and apparent dissolution kinetics, long-term static experiments show significant differences in rates of mineralization as well as compositions and morphologies of precipitates that form when the basalts are reacted with CO2-saturated water. For example, basalt from the Newark Basin in the United States was by far the most reactive of any basalt tested to date. Carbonate reaction products for the Newark Basin basalt were globular in form and contained significantly more Fe than the secondary carbonates that precipitated on the other basalt samples. In comparison, the post-reacted samples associated with the Columbia River basalts from the United States contained calcite grains with classic dogtooth spar morphology and trace cation substitution (Mg and Mn). Carbonation of the other basalts produced precipitates with compositions that varied chemically throughout the entire testing period. Examination of polished cross sections of the reacted grains by scanning electron microscopy and energy dispersive x-ray spectroscopy show precipitate overgrowths with varying chemical compositions. Compositional differences in the precipitates suggest changes in fluid chemistry unique to the dissolution behavior of each basalt sample reacted with CO2-saturated water. The Karoo basalt from South Africa appeared the least reactive, with very limited mineralization occurring during the testing with CO2-saturated water. The relative reactivity of different basalt samples were unexpectedly different in the experiments conducted using aqueous dissolved CO2-H2S mixtures versus those reacted with aqueous dissolved CO2 mixtures. For example, the Karoo basalt was highly reactive in the presence of aqueous dissolved CO2-H2S, as evident by small nodules of carbonate coating the basalt grains after 181 days of testing. However the most reactive basalt in CO2-H2O, Newark Basin, formed limited amounts of carbonate precipitates in the presence of aqueous dissolved CO2-H2S mixture. Basalt reactivity in CO2-H2O mixtures appears to be controlled by the composition of the glassy mesostasis, which is the most reactive component in the basalt rock. With the addition of H2S to the CO2-H2O system, basalt reactivity appears to be controlled by precipitation of coatings of insoluble Fe sulfides.

58 GEOSCIENCES↗

Importance of gas heating in capacitively coupled radiofrequency plasma-assisted synthesis of carbon nanomaterials

In pursuit of diamond nanoparticles, a capacitively-coupled radio frequency flow-through plasma reactor was operated with methane-argon gas mixtures. Signatures of the final product obtained microscopically and spectroscopically indicated that the product was an amorphous form of graphite. This result was consistent irrespective of combinations of the macroscopic reactor settings. To explain the observed synthesis output, measurements of C 2 and gas properties were carried out by laser-induced fluorescence and optical emission spectroscopy. Strikingly, the results indicated a strong gas temperature gradient of 100 K per mm from the center of the reactor to the wall. Based on additional plasma imaging, a model of hot constricted region (filamentation region) was then formulated. It illustrated that, while the hot constricted region was present, the bulk of the gas was not hot enough to facilitate diamond sp 3 formation: characterized by much lower reaction rates, when compared to sp 2 , sp 3 formation kinetics are expected to become exponentially slow. This result was further confirmed by experiments under identical conditions but with a H 2 /CH 4 mixture, where no output material was detected: if graphitic sp 2 formation was expected as the main output material from the methane feedstock, atomic hydrogen would then be expected to etch it away in situ, such that the net production of that sp 2 -hybridized solid material is nearly a zero. Finally, the crucial importance of gas heating was corroborated by replacing RF with microwave source whereby facile sp 3 production was attained with H 2 /CH 4 gas mixture.

36 MATERIALS SCIENCE↗

Unbiased free energy estimates in fast nonequilibrium transformations using Gaussian mixtures

In this paper, we present an improved method for obtaining unbiased estimates of the free energy difference between two thermodynamic states using the work distribution measured in nonequilibrium driven experiments connecting these states. The method is based on the assumption that any observed work distribution is given by a mixture of Gaussian distributions, whose normal components are identical in either direction of the nonequilibrium process, with weights regulated by the Crooks theorem. Using the prototypical example for the driven unfolding/folding of deca-alanine, we show that the predicted behavior of the forward and reverse work distributions, assuming a combination of only two Gaussian components with Crooks derived weights, explains surprisingly well the striking asymmetry in the observed distributions at fast pulling speeds. The proposed methodology opens the way for a perfectly parallel implementation of Jarzynski-based free energy calculations in complex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gas chromatography: Possible application of advanced instrumentation developed for solar system exploration to space station cabin atmospheres

Gas chromatography (GC) technology was developed for flight experiments in solar system exploration. The GC is a powerful analytical technique with simple devices separating individual components from complex mixtures to make very sensitive quantitative and qualitative measurements. It monitors samples containing mixtures of fixed gases and volatile organic molecules. The GC was used on the Viking mission in support of life detection experiments and on the Pioneer Venus Large Probe to determine the composition of the venusian atmosphere. A flight GC is under development to study the progress and extent of STS astronaut denitrogenation prior to extravehicular activity. Advanced flight GC concepts and systems for future solar system exploration are also studied. Studies include miniature ionization detectors and associated control systems capable of detecting from ppb up to 100% concentration levels. Further miniaturization is investigated using photolithography and controlled chemical etching in silicon wafers. Novel concepts such as ion mobility drift spectroscopy and multiplex gas chromatography are also developed for future flight experiments. These powerful analytical concepts and associated hardware are ideal for the monitoring of cabin atmospheres containing potentially dangerous volatile compounds.

Carle, G. C.↗

Characterization of CO 4th Positive Radiation in CO2-Ar Mixtures

This paper presents measurements and simulations of CO 4th Positive spectra obtained in NASA Ames Research Center's Electric Arc Shock Tube (EAST) and CentraleSupelec's Plasma Torch. The experiments were aimed at measuring optically thin emission for the main band features of CO 4th Positive by using test gas mixtures of CO2 and Ar. By using mixtures of CO2 and Ar, the temperature of the flow (and consequently black-body curve) is increased compared to using pure CO2 (or CO2 / N2 mixtures). This temperature increase allows for emission spectroscopy of features that would nominally be black-body limited for conditions relevant to Mars entry. The CO 4th Positive system is the focus of this study as it accounts for a large percentage of the emitted radiation for Martian entry, and also due to the difficulties of obtaining experimental validation data due to the emission appearing in the Vacuum Ultraviolet (VUV) spectral range. The focus of this paper is to provide a comprehensive comparison between the EAST and plasma torch data along with various CO 4th Positive databases available in the literature. Previously reported VUV CO2 / N2 EAST data required a larger temperature than would be predicted based upon equilibrium shock relations. The need for the temperature increase implies that the EAST experiment did not fully equilibrate. Thus, it is presumed that the EAST data did not obtain an equilibrium condition. The plasma torch data, on the other hand, is very consistent with equilibrium assumptions. Thus, the equilibrium data obtained in the plasma torch is utilized to construct the CO 4th Positive emission model, which is then applied to the EAST data with a non-equilibrium interpretation.

A. M. Brandis↗

Anisotropic etching in inductive plasma source with no rf biasing

An inductive plasma source driven with phase shifted antenna coils at 2 MHz has been developed to accelerate ions for semiconductor etching process. The experiment was carried out in SF{sub 6}/O{sub 2}/Ar gas mixtures in the pressure range between 0.3 and 0.9 mTorr and rf power between 0.6 and 1.5 kW. Measurement of the ion energy spectra behind the wafer has shown high energy ions (up to 70 eV). An anisotropic etching (without rf biasing) of a polysilicon film has been demonstrated in this experiment. The acceleration of the electrons was numerically studied based on the fluid theory. The numerical results show that electrons affected by Lorentz force and thermal pressure gradient make axial electron currents, which contribute to form axial electric fields and ion acceleration.

36 MATERIALS SCIENCE↗

Simulation of a turbulent spray flame using coupled PDF gas phase and spray flamelet modeling

A joint mixture fraction-enthalpy probability density function (PDF) is proposed for the simulation of turbulent spray flames. The PDF transport equation is deduced and modeled. The interaction-by-exchange-with-the-mean (IEM) model that has been developed for gas-phase flows is extended to describe molecular mixing in nonreactive and reactive spray flows. The joint PDF transport equation is solved by a hybrid finite-volume and Lagrangian Monte Carlo method. Standard spray and turbulence models are used to describe the gas phase and the liquid phase. A turbulent methanol/air spray flame is simulated using the present method. Detailed chemistry is implemented through the spray flamelet model. The precalculated spray flamelet library for methanol/air combustion comprises 23 species and 168 elementary reactions. Thus, the model is capable of predicting the formation of radicals and of pollutants. Different values for the model constant C{sub {phi}} in the IEM model are tested. The numerical results for the gas velocity, the gas temperature, and the mass fraction of methanol vapor are compared with experimental data in the literature. Good agreement with experiment is obtained when C{sub {phi}}=2.0. Marginal PDFs of mixture fraction, enthalpy, and gas temperature are presented. The computed PDFs of mixture fraction are compared with the presumed standard {beta} function and modified {beta} function. The results show that the standard {beta} function fails to reproduce bimodal shapes observed in transported PDF computation, while the modified {beta} function, fits the computed PDFs very well. Moreover, joint PDFs of mixture fraction and enthalpy are presented and analyzed. The enthalpy and mixture fraction are strongly correlated. The samples that deviate from the linear correlation are due to the energy consumption of local spray evaporation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beam coupling in hybrid photorefractive inorganic-cholesteric liquid crystal cells: Impact of optical rotation

We develop a theoretical model to describe two-beam energy exchange in a hybrid photorefractive inorganic-cholesteric cell. A cholesteric layer is placed between two inorganic substrates. One of the substrates is photorefractive (Ce:SBN). Weak and strong light beams are incident on the hybrid cell. The interfering light beams induce a periodic space-charge field in the photorefractive window. This penetrates into the cholesteric liquid crystal (LC), inducing a diffraction grating written on the LC director. In the theory, the flexoelectric mechanism for electric field-director coupling is more important than the LC static dielectric anisotropy coupling. The LC optics is described in the Bragg regime. Each beam induces two circular polarized waves propagating in the cholesteric cell with different velocities. The model thus includes optical rotation in the cholesteric LC. The incident light beam wavelength can fall above, below, or inside the cholesteric gap. The theory calculates the energy gain of the weak beam, as a result of its interaction with the pump beam within the diffraction grating. Theoretical results for exponential gain coefficients are compared with experimental results for hybrid cells filled with cholesteric mixture BL038/CB15 at different concentrations of chiral agent CB15. Reconciliation between theory and experiment requires the inclusion of a phenomenological multiplier in the magnitude of the director grating. This multiplier is cubic in the space-charge field, and we provide a justification of the q-dependence of the multiplier. Within this paradigm, we are able to fit theory to experimental data for cholesteric mixtures with different spectral position of cholesteric gap relative to the wavelength of incident beams, subject to the use of some fitting parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determining the Porosity and Saturated Hydraulic Conductivity of Binary Mixtures

Gravels and coarse sands make up significant portions of some environmentally important sediments, while the hydraulic properties of the sediments are typically obtained in the laboratory using only the fine fraction (e.g., <2 mm or 4.75 mm). Researchers have found that the content of gravel has significant impacts on the hydraulic properties of the bulk soils. Laboratory experiments were conducted to measure the porosity and the saturated hydraulic conductivity of binary mixtures with different fractions of coarse and fine components. We proposed a mixing-coefficient model to estimate the porosity and a power-averaging method to determine the effective particle diameter and further to predict the saturated hydraulic conductivity of binary mixtures. The proposed methods could well estimate the porosity and saturated hydraulic conductivity of the binary mixtures for the full range of gravel contents and was successfully applied to two data sets in the literature.

54 ENVIRONMENTAL SCIENCES↗

Determining the Porosity and Saturated Hydraulic Conductivity of Binary Mixtures

Gravels and coarse sands make up significant portions of some environmentally important sediments, while the hydraulic properties of the sediments are typically obtained in the laboratory using only the fine fraction (e.g., <2 mm or 4.75 mm). Researchers have found that the content of gravel has significant impacts on the hydraulic properties of the bulk soils. Laboratory experiments were conducted to measure the porosity and the saturated hydraulic conductivity of binary mixtures with different fractions of coarse and fine components. We proposed a mixing-coefficient model to estimate the porosity and a power-averaging method to determine the effective particle diameter and further to predict the saturated hydraulic conductivity of binary mixtures. The proposed methods could well estimate the porosity and saturated hydraulic conductivity of the binary mixtures for the full range of gravel contents and was successfully applied to two data sets in the literature.

54 ENVIRONMENTAL SCIENCES↗

Photo-sensitized ignition of hydrogen/oxygen mixtures for hypersonic flight vehicles

An approach toward improving supersonic ignition and combustion efficiency was investigated under a feasibility program with NASA-Ames. The idea is to selectively irradiate targetted species in the combustion zone. The ensuing photodissociation reactions produce highly reactive radicals which modify the gas phase kinetics. The overall objective of this research was to demonstrate photosensitized ignition of H2/O2 mixtures, and to gain a preliminary understanding of the ignition mechanism, especially as it pertains to the concept of supersonic combustion. To this end, a series of experiments were performed with a model sensitizer, NO2. At subatmospheric pressures and moderate temperatures (above 100 F), mixtures of H2/O2/NO2 are ignitable by a pulsed eximer laser at 308 nm, 115 to 200 mJ. Ignitability was found to be a function of NO2 pressure, temperature, laser energy per pulse, and laser lens focal length (fluence at focal volume). Mixtures could not be ignited in the absence of the sensitizer. While increasing temperature improved sensitized ignition in the lower temperature range, a retarding effect was observed at the highest temperatures. To more thoroughly understand these thermal effects, the UV-Vis and IR spectra of NO2 and H2/O2/NO2 mixtures were studied over the temperature range 70 to 900 F. Initially, increasing temperature shifts the N2O4 in a reversible reaction to 2 NO2 equilibrium toward NO2, favoring photochemical ignition. However, at still higher temperature, NO2 converts to non-absorbing NO + 1/2 O2, thus preventing photosensitized ignition.

Lavid, Moshe↗

Experimental Ignition Delay Time Measurements and Chemical Kinetics Modeling of Hydrogen/Ammonia/Natural Gas Fuels

In recent years, hydrogen-carrying compounds have accrued interest as an alternative to traditional fossil fuels due to their function as zero-emission fuels. As such, there is interest in investigating hydrogen-carrying compounds to improve understanding of the fuels' characteristics for use in high pressure systems. In the current study, the oxidation of ammonia/natural gas/hydrogen mixtures was carried out to study carbon monoxide (CO) formation profiles as well as the ignition delay times (IDTs) behind reflected shock waves in order to refine chemical kinetic models. Experiments were carried out in the University of Central Florida's shock tube facility by utilizing chemiluminescence to obtain OH* emission and laser absorption spectroscopy to obtain CO profiles over a temperature range between 1200 K and 1800 K with an average pressure of 2.2 atm. Experimental mixtures included both neat and combination natural gas/hydrogen with ammonia addition, with all mixtures except one having an equivalence ratio of 1. Results were then compared with the GRI 3.0 mechanism, as well as the newly developed UCF 2022 mechanism utilizing chemkin-pro software. In general, both models were able to capture the trend in auto-ignition delay times and CO time histories for natural gas and ammonia mixtures. However, for ammonia–hydrogen mixtures, GRI 3.0 failed to predict ignition delay times, whereas the UCF 2022 mechanism was able to capture the IDTs within the uncertainty limits of the experiments. A sensitivity analysis was conducted for different mixtures to understand the important reactions at the experimental conditions. Lastly, a reaction pathway analysis was carried out to understand important ammonia decomposition pathways in the presence of hydrogen and natural gas.

33 ADVANCED PROPULSION SYSTEMS↗

Baking the first bread in space

This Getaway Special program is a joint venture between Spar, Monarch flour and Telesat, with Telesat being responsible for the design, manufacture and implementation of the equipment. The purpose of the experiment is to investigate the behavior of bread yeast in the absence of gravity and in the presence of normal atmospheric pressure. The proposed design mixes flour, water and yeast on-orbit, allows the mixture to prove and then bakes it. This paper outlines the development history of the experiment, the various test programs and some of the problems encountered, with their solutions.

Source record↗

Facile Thermal W–W Bond Homolysis in the N-Heterocyclic Carbene Containing Tungsten Dimer [CpW(CO) 2 (IMe)] 2

The thermal W-W bond homolysis in [CpW(CO)2(IMe)]2 (IMe = 1,3-dimethylimidazol-2-ylidene) was investigated and was found to occur to a large extent compared to other tungsten dimers such as [CpW(CO)3]2. CpW(CO)2(IMe)H was prepared by heating a solution of [IMeH]+[CpW(CO)2(PMe3)]-, and exists in solution as a mixture of interconverting cis and trans isomers. The carbene rotation in CpW(CO)2(IMe)H was explored by DFT calculations, and low enthalpic barriers (< 3.5 kcal mol-1) are predicted. CpW(CO)2(IMe)H has pKaMeCN = 31.5(3) and deprotonation with KH gives K+[CpW(CO)2(IMe)]- (• MeCN). Hydride abstraction from CpW(CO)2(IMe)H with Ph3C+PF6- in the presence of a coordinating ligand L (MeCN or THF) gives [CpW(CO)2(IMe)(L)]+PF6-. Electrochemical measurements on the anion [CpW(CO)2(IMe)]- in MeCN, together with digital simulations, give an E1/2 of -1.54(2) V vs Cp2Fe+/0 for the [CpW(CO)2(IMe)]•/- couple. A thermochemical cycle provides the solution bond dissociation free energy of the W-H bond of CpW(CO)2(IMe)H as 61.3(6) kcal mol-1. In the electrochemical oxidation of [CpW(CO)2(IMe)]-, reversible dimerization of the electrogenerated radical CpW(CO)2(IMe)• occurs, and digital simulation provides kinetic and thermodynamic parameters for the monomer-dimer equilibrium: kdimerization ~ 2.5 x 104 M-1 s-1, khomolysis ~ 0.5 s-1 (i.e., Kdim ~ 5 x 104 M-1). Reduction of [CpW(CO)2(IMe)(MeCN)]+PF6- with cobaltocene gives the dimer [CpW(CO)2(IMe)]2, which in solution exists as a mixture of anti and gauche rotomers. As expected from the electrochemical experiments, the dimer is in equilibrium with detectable amounts of CpW(CO)2(IMe)•. This species was observed by IR spectroscopy, and its presence in solution is also in accordance with the observed reactivity toward 2,6-di-tert-butyl-1,4-benzoquinone, chloroform and dihydrogen. This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences and Geosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for DOE by Battelle. The EPR studies were performed at EMSL, a national scientific user facility sponsored by the Department of Energy’s Office of Biological and Environmental Research located at Pacific Northwest National Laboratory.

36 MATERIALS SCIENCE↗

Rheology of water-silicate mixtures at low temperatures

Lab studies of the effects of hard particulates on the rheology of ice have been mainly directed at the evolution of the Galilean satellites, but yield results that may be applicable to the rheology of the Martian polar caps. The experiments have explored the ductile rheology as well as brittle behavior of water + particulate (mainly quartz) mixtures in particulate volume fractions ranging from 0.001 to 0.56, particulate sizes 1 to 150 microns, temperatures 77 to 224 K, and deformation rates 3.5 x 10(exp -7) to 3.5 x 10(exp -4)/s, under confining pressures of 50 to 100 MPa. Particulates act mainly to strengthen the material in the ductile field, although work by others has shown that very close to the melting temperature hard particulates can actually cause softening. So called dispersion hardening by the Orowan mechanism of pinning glide dislocations, often exploited in metallurgy for strengthening materials, appears not to be an issue in ice except at very low temperatures, less than approx. 135 K.

Durham, William B.↗

What dynamics can be expected for mixed states in two-slit experiments?

Weak-measurement-based experiments (Kocsis et al., 2011) have shown that, at least for pure states, the average evolution of independent photons in Young’s two-slit experiment is in compliance with the trajectories prescribed by the Bohmian formulation of quantum mechanics. But, what happens if the same experiment is repeated assuming that the wave function associated with each particle is different, i.e., in the case of mixed (incoherent) states? This question is investigated here by means of two alternative numerical simulations of Young’s experiment, purposely devised to be easily implemented and tested in the laboratory. Contrary to what could be expected a priori, it is found that even for conditions of maximal mixedness or incoherence (total lack of interference fringes), experimental data will render a puzzling and challenging outcome: the average particle trajectories will still display features analogous to those for pure states, i.e., independently of how mixedness arises, the associated dynamics is influenced by both slits at the same time. Physically this simply means that weak measurements are not able to discriminate how mixedness arises in the experiment, since they only provide information about the averaged system dynamics. - Highlights: • The dynamics associated with mixture states in investigated by means of two simple Young’s two-slit models. • The models are prepared to be easily implemented and tested in the laboratory by means of weak measurements. • Bohmian mechanics has been generalized to encompass statistical mixtures. • Even for conditions of maximal mixedness numerical simulations show that the dynamics is strongly influenced by both slits. • Accordingly, weak measurements are unable to discriminate how mixedness arises in an experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluating Lithium-Lead Mixtures for Increased Tritium Breeding in Fusion Energy Blanket Systems: Exploring the Impact of Composition and Temperature

This project investigates hypo- and hyper-eutectic liquid lithium-lead (PbLi) mixtures as a coolant in fusion blanket systems, with a focus on testing the compatibility of compositions with better tritium breeding ratios (TBR). The 12-month study concentrates on static corrosion experiments, comparing silicon carbide (SiC) corrosion rates in Li-rich and eutectic Li-Pb mixtures, and examining interactions between Mo and PbLi. The research seeks to determine the maximum operating temperatures for this material combination, acknowledging the balance between Li-Pb melting temperature and achievable TBR to unlock new opportunities for blanket design. This work lays the groundwork for future collaboration between Kyoto Fusioneering and Oak Ridge National Laboratory (ORNL). Findings could enhance the TBR of fusion blanket designs, and impact fusion energy development by confirming material compatibility between different Li-Pb mixtures with SiC and Mo at higher temperatures, including at temperatures relevant for very high-temperature blankets (1,000 °C), which could enable higher electricity conversion efficiencies and commercial applications using process heat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Titan Haze Simulation (THS) Experiment on COSmIC. Part III. XANES Study of Laboratory Analogs of Titan Tholins

We have used the Titan Haze Simulation (THS) experimental set-up at NASA Ames’ COSmIC 19 facility to produce four laboratory analogs of Titan’s aerosols, or tholins. These tholin samples 20 were produced from four gas mixtures, representative of Titan’s atmosphere, of initial 21 compositions N2:CH4 (90:10 and 95:5) and N2:CH4:C2H2 (89.5:10:0.5 and 94.5:5:0.5) at 150 K, 22 using a plasma discharge in the stream of a jet-cooled gas expansion. Here we present an ex-situ 23 X-ray absorption near-edge structure (XANES) spectroscopy analysis of these four tholin 24 samples. The C- and N-XANES spectra show the presence of various functional groups 25 (aromatic carbon, imines, nitriles, etc.) whose abundances are correlated with (i) the relative 26 proportions between N2 and CH4, and (ii) the presence or absence of C2H2 in the initial mixtures. 27 In particular, mixtures containing C2H2 result in the formation of tholins consisting of more 28 aromatic structures and displaying larger relative amounts of imines and nitriles, but lower 29 overall nitrogen content. XANES spectroscopy also allowed for the determination of the 30 elemental C/N ratios for the four tholins, which were all found to be low (< 2.5) and consistent 31 with those measured for tholins produced in other, independent experimental set-ups. The C/N 32 ratios of tholins produced from gas mixtures that contained C2H2 (2.2–2.4) were found to be 33 about twice as large as those of tholins produced from gas mixtures that did not contain C2H234 (0.9–1.3). These new experimental results from the COSmIC/THS experiment demonstrate the 35 impact initial precursors have on the nitrogen chemistry during the formation of tholins, which 36 may help in the interpretation of observations and the development of models of Titan’s 37 atmosphere.

Titan↗