SEARCH · Engineering Papers

Results for “MOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Development and demonstration of manufacturing processes for fabricating graphite/LARC-160 polyimide structural elements, part 4, paragraph B

A quality assurance program was developed which included specifications for celion/LARC-160 polyimide materials and quality control of materials and processes. The effects of monomers and/or polymer variables and prepeg variables on the processibility of celion/LARC prepeg were included. Processes for fabricating laminates, honeycomb core panels, and chopped fiber moldings were developed. Specimens and conduct tests were fabricated to qualify the processes for fabrication of demonstration components.

Source record↗

NASA NTRS1980

High Temperature Resin Matrix Composites for Aerospace Structures

Accomplishments and the outlook for graphite-polyimide composite structures are briefly outlined. Laminates, skin-stiffened and honeycomb sandwich panels, chopped fiber moldings, and structural components were fabricated with Celion/LARC-160 and Celion/PMR-15 composite materials. Interlaminar shear and flexure strength data obtained on as-fabricated specimens and specimens that were exposed for 125 hours at 589 K indicate that epoxy sized and polyimide sized Celion graphite fibers exhibit essentially the same behavior in a PMR-15 matrix composite. Analyses and tests of graphite-polyimide compression and shear panels indicate that utilization in moderately loaded applications offers the potential for achieving a 30 to 50 percent reduction in structural mass compared to conventional aluminum panels. Data on effects of moisture, temperature, thermal cycling, and shuttle fluids on mechanical properties indicate that both LARC-160 and PMR-15 are suitable matrix materials for a graphite-polyimide aft body flap. No technical road blocks to building a graphite-polyimide composite aft body flap are identified.

Davis, J. G., Jr.↗

NASA NTRS1980

Influence of excess diamine on properties of PMR polyimide resins and composites

By varying the stoichiometry of the reactants in the preparation of PMR polyimide resin, changes occur in molecular weight distribution which influence the rheological properties and thus the processability of the resin, as well as the mechanical properties of the composite. The influence of 1-10 percent molar excess MDA on the molecular weight distribution and rheological properties of an imidized PMR system were exposed. Molecular weight distribution is characterized by gel permeation chromatography of the imidized molding compound; shear viscosity is related to changes in average molecular weight. The thermo-oxidative stability at 600 F, glass transition temperature, flexural and interlaminar shear properties of PMR polyimide/Celion 6000 graphite fiber composites are compared as a function of the percent excess MDA in the monomer reactant mixture.

Hurwitz, F. I.↗

NASA NTRS1978

Curable liquid hydrocarbon prepolymers containing hydroxyl groups and process for producing same

Production of hydroxyl containing curable liquid hydrocarbon prepolymers by ozonizing a high molecular weight saturated hydrocarbon polymer such as polyisobutylene or ethylene propylene rubber is discussed. The ozonized material is reduced using reducing agents, preferably diisobutyl aluminum hydride, to form the hydroxyl containing liquid prepolymers having a substantially lower molecular weight than the parent polymer. The resulting curable liquid hydroxyl containing prepolymers can be poured into a mold and readily cured, with reactants such as toluene diisocyanate, to produce highly stable elastomers having a variety of uses such as binders for solid propellants.

Rhein, R. A.↗

NASA NTRS1980

Preparation of cast aluminum alloy-mica particle composites

A method for making aluminum-mica particle composites is presented in which mica particles are stirred in molten aluminum alloys followed by casting in permanent molds. Magnesium is added either as an alloying element or in the form of pieces to the surface of the alloy melts to disperse up to 3 wt% mica powders in the melts and to obtain high recoveries of mica in the castings. The mechanical properties of the aluminum alloy-mica composite decrease with increasing mica content; however, even at 2.2% it has a tensile strength of 14.22 kg/sq mm with 1.1% elongation, a compression strength of 42.61 kg/sq mm, and an impact strength of 0.30 kgm/sq cm. Cryogenic and self-lubricating bearing are mentioned applications.

Deonath, MR.↗

NASA NTRS1979

Development and demonstration of manufacturing processes for fabricating graphite/PMR-15 polyimide structures

The work included establishing controls on the polymer, the prepreg, composite fabrication, and quality assurance, as well as fabrication of structural elements to demonstrate the developed materials and processes. The fabricated structures were hat sections, I-beam sections, honeycomb sandwich structures, and molded graphite-reinforced fittings. The graphite/PMR-15 polyimide system was shown to be well suited for use in the 550-600 F temperature range; the processing techniques developed were proved and found potentially useful for other commercially available systems.

Sheppard, C. H.↗

NASA NTRS1980

Development of a Kevlar/PMR-15 reduced drag DC-9 nacelle fairing

The paper describes an advanced composite fairing designed to reduce drag on DC-9 nacelles as a part of the NASA Engine Component Improvement Program. This fairing is the aft enclosure for the thrust reverser actuator system on JT8D engine nacelles and is subjected to a 500 F exhaust flow during the reverse thrust. A reduced-drag configuration was developed by using in-flight tuft surveys for flow visualization in order to identify areas with low-quality flow, and then modifying the aerodynamic lines to improve the flow. A fabrication method for molding the part in an autoclave was developed; this material system is suitable for 500 F. The resultant composite fairing reduces the overall aircraft drag 1% with a weight reduction of 40% when compared with a metal component.

Kawai, R. T.↗

NASA NTRS1980

Life sciences experiments on Spacelab 1

The objectives and procedures regarding various biological experiments to be conducted on Spacelab 1 are reviewed. These include the mapping of the HZE cosmic ray particle flux within the Spacelab module, investigating the effects of nullgravity on circadian cycles in the slime mold, Neurospora crassa, and measuring nutations of the dwarf sunflower, Helianthus annus. Emphasis is placed on research regarding possible changes in vestibulocular reflexes, vestibulospinal pathways, cortical functions involving perception of motion and spatial susceptibility. Also discussed are experiments regarding erythrokinetics in man and the effects of prolonged weightlessness of the humoral immune response in humans.

Buderer, M. C.↗

NASA NTRS1980

Development of moldable, high density reaction bonded silicon nitride

It is noted that currently available reaction bonded silicon nitride (RBSN) materials are limited by relatively low strength (up to 300 MPa) and oxidation resistance, primarily due to open porosity. Attention is given to technology that was developed and used to produce an improved grade of injection molded RBSN having a density of 2.8 g/cc, with significantly decreased open porosity and a strength exceeding 350 MPa. It is shown that these results are primarily due to advances in two areas: silicon powder processing, and nitriding technique. A comparison of room temperature strength and oxidation resistance of the new material with that of state-of-the-art RBSN, showed significant improvements. It is concluded that turbine stator vanes were produced to show that this improved RBSN technology has been reduced to engineering practice.

Mangels, J. A.↗

NASA NTRS1982

Electrically-conductive Low-Permeability Pressure Seal

Metal-plated butyl rubber seal has been devised for enclosures of electronic equipment that must be maintained under dry, inert atmosphere. Seal prevents gas leakage over prolonged periods, while conductivity suppresses electromagnetic emissions from sealed equipment. Seal is formed by depositing aluminum or gold onto molded-in-place butyl rubber gasket and surrounding areas of flange.

Krieg, H. C.↗

NASA NTRS1980

Structural wood panels with improved fire resistance

Structural wood paneling or other molded wood compositions consisting of finely divided wood chips, flour, or strands are bound together and hot pressed with a modified novolac resin which is the cured product of a prepolymer made from an aralkyl ether or halide with a phenol and a hardening agent such as hexamethylene tetramine. The fire resistance of these articles is further improved by incorporating in the binder certain inorganic fillers, especially a mixture of ammonium oxalate and ammonium phosphate.

Sawko, P. M.↗

NASA NTRS1972

Polymeric compositions and their method of manufacture

Filled polymer compositions are made by dissolving the polymer binder in a suitable sublimable solvent, mixing the filler material with the polymer and its solvent, freezing the resultant mixture, and subliming the frozen solvent from the mixture from which it is then removed. The remaining composition is suitable for conventional processing such as compression molding or extruding. A particular feature of the method of manufacture is pouring the mixed solution slowly in a continuous stream into a cryogenic bath wherein frozen particles of the mixture result. The frozen individual particles are then subjected to the sublimation.

Moser, B. G.↗

NASA NTRS1981

Internal fuse modules for solid tantalum capacitors

Miniature fuse modules were designed for and incorporated into two styles of solid tantalum capacitors. One is an epoxy molded, radial leaded, high frequency decoupling capacitor; the other is an hermetically sealed device with axial lead wires. The fusible element for both devices consists of a fine bimetallic wire which reacts exothermically upon reaching a critical temperature and then disintegrates. The desirability of having fused devices is discussed and design constraints, in particular those which minimize inductance and series resistance while optimizing fuse actuation characteristics, are reviewed. Factors affecting the amount of energy required to actuate the fuse and reliability of acuation are identified.

Dematos, H. V.↗

NASA NTRS1981

Low cost concentrator

The key to concentrator cost effectiveness is the proper design of the reflector surface panels. The low cost concentrator reflective surface design is based on use of a thin, backsilvered mirror glass reflector bonded to a molded structural plastic substrate. This combination of reflective panel material offers excellent optical performance at low cost. The design approach, rationale for the selected configuration, and the development status are described. Reflective panel development and demonstration results are also presented.

Bedard, R. J., Jr.↗

NASA NTRS1980

Development of low-cost directionally-solidified turbine blades

A low-cost directionally solidified (DS) casting of turbine blades of high stress rupture is discussed. The process uses an exothermically heated mold; a newly designed solid blade was cast for the high-pressure turbine of the TFE731-3 turbofan engine. Ni-based alloys Mar-M 247 and Mar-M 200 + Hf were used. The solid DS blade replaced a conventionally cast IN100 component; a 40% cost saving is expected, with a 2.4% reduction in the takeoff specific fuel consumption. The DS Mar-M 247 blade has been selected for production in the TFE731-3B-100, and advanced version of the TFE731-3.

Hoppin, G. S., III↗

NASA NTRS1980

Research on CR-39 plastic detectors for cosmic ray astrophysics

The sensitivity of CR-39 is a strong function of catalyst concentration during its polymerization. Normal CR-39 will detect vertically incident particles with Z/beta as low as 10. An extrapolation suggests that CR-39 with a high catalyst concentration and sensitivity to within approximate 5% can be made by a suitable choice of cure cycle and mold material. CR-39 is less sensitive than Lexan to thermal annealing of tracks but cannot tolerate background radiation levels greater than a few Mrad.

Price, P. B.↗

NASA NTRS1980

Determination of the orientation symmetry axis of graphite specimens

A technique is described for determining the true orientation symmetry axis of graphite specimens from conventional X-ray diffraction data. The technique, although developed for graphite, is applicable to any material exhibiting crystalline orientation which is symmetric about some axis. The requisite equations are derived for applying the procedure to both Bacon transmission data and rotating specimen reflection data. Results are presented which show that the symmetry axis of eleven molded graphites tested differed significantly from their nominal pressing directions.

Schryer, D. R.↗

NASA NTRS1980

Future requirements for advanced materials

Recent advances and future trends in aerospace materials technology are reviewed with reference to metal alloys, high-temperature composites and adhesives, tungsten fiber-reinforced superalloys, hybrid materials, ceramics, new ablative materials, such as carbon-carbon composite and silica tiles used in the Shuttle Orbiter. The technologies of powder metallurgy coupled with hot isostatic pressing, near net forging, complex large shape casting, chopped fiber molding, superplastic forming, and computer-aided design and manufacture are emphasized.

Olstad, W. B.↗