Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MITIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Strategies for control and mitigation of efflorescence in metakaolin-based geopolymers

Efflorescence can be harmful to material performance as a consequence of microstructural changes due to leaching and carbonation of alkalis. This article identifies mechanisms of efflorescence in metakaolin-based geopolymers, and approaches to reduce free/mobile alkali cations and pore network connectivity, and hence reduce efflorescence. Mechanical, mass transport and microstructural properties are assessed in metakaolin-based geopolymer cements produced using different alkali concentrations in the alkali activator and substitution/addition of blast furnace slag, silica fume, calcium aluminate cement, silicone oil and a dispersive admixture. The most effective strategy to reduce efflorescence results from increasing Si/Al in the geopolymer gel by addition of soluble silicate, silica fume or silicone oil. Addition of calcium aluminate cement or a dispersive admixture also reduce efflorescence, but are less effective. These results confirm that efflorescence may be reduced by controlling the amount of soluble silicates and reducing free alkali cations in geopolymers, providing enhanced performance and durability.

36 MATERIALS SCIENCE↗

Optimizing fluvial flood mitigation strategies: A multi-objective approach for cost-effective and socially-aware infrastructure feasibility analysis

Effective levee planning must balance capital cost, risk reduction, and community priorities. These objectives are rarely optimized together. This study presents a feasibility phase, simulationin-the-loop framework that couples terrain-based flood modeling with a socially aware multiobjective optimizer. Flood risk is measured as Expected Annual Exposed Population (EAEP), obtained by integrating exposure over Annual Exceedance Probability (AEP) nodes, mirroring the Hydrologic Engineering Center's Flood Damage Reduction Analysis (HEC-FDA) expected-annual formulation but with people rather than dollars. Exposure per scenario is computed by overlaying binary inundation masks with a population surface at the tract level. Distributional fairness is encoded through a Group Benefit Share (GBS) constraint that requires high-SVI tracts to receive at least a baseline share of annualized benefits. Capital cost is represented by a height-dependent unit-cost model suitable for screening. This study addresses the two-objective problem, minimize cost and expected annual exposure subject to the GBS constraint, using Non-Dominated Sorting Genetic Algorithm II (NSGA-II) and leveraging Pareto front for feasibility phase decision making. Implemented with terrain-based flood modeling, GeoFlood, for rapid scenario evaluation, the framework is demonstrated in Southeast Texas. The results reveal clear trade-offs among cost, risk, and social benefits and identify non-dominated levee height configurations that satisfy the benefit-share floor. The contributions are a scalable decision support method that operationalizes expected annual population-based risk, embeds enforceable benefit-sharing guarantees, and uses lightweight simulation to explore large design spaces before higher fidelity design stages.

Flood mitigation↗

Innovative duo-recombination layer design for effective hydrogen crossover mitigation in advanced MEAs for PEM water electrolyzers

Hydrogen crossover in proton exchange membrane water electrolyzers (PEMWEs) poses a safety hazard, reduces the overall efficiency, and limits the operational differential pressure range. Here, in this study, a membrane electrode assembly (MEA) with innovative Pt duo-recombination layer (DRL) design is developed by the unique reactive spray deposition technology (RSDT). The novel design comprises two thin RLs integrated within the volume of the membrane and has a total Pt loading of only 0.04 mg Pt cm −2 . Long-term durability test for over 3000 h is performed with as-fabricated MEA at steady-state conditions typical for an industrial hydrogen production system. The results from the durability test show that the newly developed DRL design effectively suppresses the H2 crossover to below 0.5 vol%. Furthermore, comprehensive post-test characterization of the MEA is performed and potential failure mechanisms in the Pt RLs observed during the durability test are identified and discussed in detail for the first time.

08 HYDROGEN↗

Assessment of the driving factors of CO 2 mitigation costs of household biogas systems in China: A LMDI decomposition with cost analysis model

China has been placing a substantial focus on biogas for reducing energy consumption and carbon dioxide (CO 2 ) emissions. The operation mode of biogas systems may make the CO 2 reduction target over-optimistic. There is limited research to investigate the influential factors that may be causing the gap between the actual and theoretical CO 2 reduction costs of biogas systems in China. In this research, by using field survey data of 209 biogas users and 489 non-biogas users from 19 villages in 2015, the gap between actual and theoretical unit CO 2 reduction cost is quantified at approximately 156 USD/t CO 2 . By employing the Logarithmic Mean Divisia Index I (LMDI) model, it is found that both the cost effect (48%) and the reduction effect (52%) contribute to the unit CO 2 reduction cost gap. Furthermore, four influential factors–household labor, accessibility to the energy resource, acceptance of biogas technology, and subsidy–significantly narrow the gap between actual and theoretical CO 2 reduction costs, while the levelized subsidy contributes to widening the gap. On average, biogas systems should be operated for at least four years and the substitution rate should be more than 67% in order to keep the gap between actual and theoretical CO 2 reduction costs under 50%.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Regime-Dependence of Nocturnal Nitrate Formation via N 2 O 5 Hydrolysis and Its Implication for Mitigating Nitrate Pollution

The heterogeneous hydrolysis of dinitrogen pentoxide (N 2 O 5 ) is an important pathway in nitrate formation; however, its formation rate and relative contribution to total particulate nitrate (pNO 3 - ) are highly variable. Here we report that nocturnal pNO 3 - formation via N 2 O 5 hydrolysis is dependent on the regime defined by the ratio of NO 2 to O 3 . Nocturnal pNO 3 - formation via N 2 O 5 hydrolysis is suppressed in an O 3 -limited regime but enhanced in a NO 2 -limited regime. The results have crucial implications for effective control of nitrate pollution in the future. An exclusive decrease in NO 2 will decrease nocturnal pNO 3 - formation in a NO 2 -limited regime but may be less effective or even increase nocturnal pNO 3 - formation in an O 3 -limited regime.

54 ENVIRONMENTAL SCIENCES↗

A cleaner snow future mitigates Northern Hemisphere snowpack loss from warming

Abstract Light-absorbing particles (LAP) deposited on seasonal snowpack can result in snow darkening, earlier snowmelt, and regional climate change. However, their future evolution and contributions to snowpack change relative to global warming remain unclear. Here, using Earth System Model simulations, we project significantly reduced black carbon deposition by 2081-2100, which reduces the December-May average LAP-induced radiative forcing in snow over the Northern Hemisphere from 1.3 Wm −2 during 1995-2014 to 0.65 (SSP126) and 0.49 (SSP585) Wm −2 . We quantify separately the contributions of climate change and LAP evolution on future snowpack and demonstrate that projected LAP changes in snow over the Tibetan Plateau will alleviate future snowpack loss due to climate change by 52.1 ± 8.0% and 8.0 ± 1.1% at the end of the century for the two scenarios, mainly due to reduced black carbon contamination. Our findings highlight a cleaner snow future and its benefits for future water supply from snowmelt especially under the sustainable development pathway of SSP126.

54 ENVIRONMENTAL SCIENCES↗

Optimization of floodwater redistribution from Lake Nasser could recharge Egypt’s aquifers and mitigate its excessive floods

Extreme precipitation periods, possibly related to climate change, over the Nile River source areas caused flooding in Sudan and excess runoff reaching Lake Nasser in Egypt in 1998–2002 and 2019–2022. Excess water from the 1st event (25.5 × 10 9 m 3 ) was channeled to depressions within the plateau west of the Nile Valley, forming the Tushka Lakes, where it was left to evaporate, a fate that awaits the 53.5 × 10 9 m 3 from the 2nd event while the underlying fossil Nubian Sandstone Aquifer System is being depleted (–0.98 × 10 9 m 3 /yr). We simulated release scenarios of excess Lake Nasser waters (53.5 × 10 9 m 3 ) to proximal lowlands; preference was given to the scenario that recharged the aquifer through infiltration (74.3%) and minimized losses to evaporation (20.1%) and surface runoff (5.6%). Findings serve as an example of adaptations that replace catastrophic consequences of climate change with beneficial and sustainable development opportunities.

54 ENVIRONMENTAL SCIENCES↗

Thermal Overloading Risk Mitigation With a Semi-Analytical Probabilistic Model on Branch Current

A semi-analytical formulation is presented in this paper for the probability computation of branch current in multiphase systems. The developed formula is derived based on the linear power flow model in rectangular coordinates. The system uncertainty injections can be renewable energy resources or loads and are modeled using a Gaussian mixture model (GMM). The developed formula can be used to compute the line current violation probability as well as integrate into optimal power flow problem as chance-constraint relaxation. Here, the proposed formula is first compared with the Matlab embedded numerical integration function to show its performance. Besides, the semi-analytical formula is validated and compared with the Monte Carlo simulation method using the IEEE 123-bus system, EPRI Ckt5, and Ckt7 systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An Evaluation of the Impact of Glycolate and Glycolate Mitigation on the Defense Waste Processing Facility Recycle Diversion Project Flowsheet

The Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) processes radioactive High Level Waste (HLW) sludge solids from the Concentration, Storage, and Transfer Facilities (CSTF); which includes the SRS Tank Farm and Evaporator facilities, and a concentrated Cs-137 laden stream and a Monosodium Titanate (MST) and sludge solids stream from the SRS Salt Waste Processing Facility (SWPF). The waste is chemically adjusted with acids and reductant (currently with 50 wt.% nitric acid and ~90 wt.% formic acid, but eventually formic acid will be substituted with ~70 wt.% glycolic acid), and frit is added so that a durable, borosilicate glass waste form can be produced when the material is vitrified in the melter. As a result of the evaporation of water during both the melter feed preparation and the melter feed vitrification steps in DWPF, a recycle waste stream is generated, neutralized, and sent back to the CSTF. The recycle waste is a dilute aqueous stream originating from the collection of condensate liquids containing some minor sludge, MST, and frit solids and other waste components resulting from melter feed entrainment during foamover events and transfer of volatile species into the condensate. The recycle stream volume is significant and is expected to approach 3 million gallons per year once SWPF reaches full operation, requiring the use of multiple large CSTF tanks for storage. The recycle waste is currently collected in the SRS Tank Farm and periodically evaporated in the 242-16H (2H) Evaporator to conserve storage space.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗