Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MEASUREMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Relation between strength of interaction and accuracy of measurement for a quantum measurement

The process of measuring a two-level quantum system was examined by applying the Hamiltonian formalism. For the measurement of an observable that does not commute with the system Hamiltonian, a nontrivial relationship among the strength of interaction, the time interval of the process, and the accuracy of the measurement was obtained. Particularly, to achieve an error-free measurement of such an observable, a condition stating that the interaction Hamiltonian does not commute with the system Hamiltonian needs to be satisfied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Arbitrarily complete Bell-state measurement using only linear optical elements

A complete Bell-state measurement is not possible using only linear-optic elements, and most schemes achieve a success rate of no more than 50%, distinguishing, for example, two of the four Bell states but returning degenerate results for the other two. It is shown here that the introduction of a pair of ancillary entangled photons improves the success rate to 75%. More generally, the addition of 2{sup N}-2 ancillary photons yields a linear-optic Bell-state measurement with a success rate of 1-1/2{sup N}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-precision measurements of the diamond Hugoniot in and above the melt region

High-precision measurements of the diamond principal Hugoniot have been made at pressures between 6 and 19 Mbar. Shock velocities were determined with 0.3%-1.1% precision using a velocity interferometer. Impedance-matching analysis, incorporating systematic uncertainties in the equation of state of the quartz standard, was used to determine the Hugoniot with 1.2%-2.7% precision in density. The results are in good agreement with published ab initio calculations, which predict a small negative melt slope along the Hugoniot, but disagree with previous laser-driven shock wave experiments, which had observed a large density increase in the melt region. In the extensive solid-liquid coexistence regime between 6 and 10 Mbar, the present measurements indicate that the mixed phase is a few percent more dense than what would be expected from a simple interpolation between liquid and solid Hugoniots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct in situ measurement of coupled magnetostructural evolution in a ferromagnetic shape memory alloy and its theoretical modeling

Ferromagnetic shape memory alloys (FSMAs) have shown great potential as active components in next generation smart devices due to their exceptionally large magnetic-field-induced strains and fast response times. During application of magnetic fields in FSMAs, as is common in several magnetoelastic smart materials, there occurs simultaneous rotation of magnetic moments and reorientation of twin variants, resolving which, although critical for design of new materials and devices, has been difficult to achieve quantitatively with current characterization methods. At the same time, theoretical modeling of these phenomena also faced limitations due to uncertainties in values of physical properties such as magnetocrystalline anisotropy energy (MCA), especially for off-stoichiometric FSMA compositions. Here, in situ polarized neutron diffraction is used to measure directly the extents of both magnetic moments rotation and crystallographic twin-reorientation in an FSMA single crystal during the application of magnetic fields. Additionally, high-resolution neutron scattering measurements and first-principles calculations based on fully relativistic density functional theory are used to determine accurately the MCA for the compositionally disordered alloy of Ni 2 Mn 1.14 Ga 0.86 . The results from these state-of-the-art experiments and calculations are self-consistently described within a phenomenological framework, which provides quantitative insights into the energetics of magnetostructural coupling in FSMAs. Furthermore, based on the current model, the energy for magnetoelastic twin boundaries propagation for the studied alloy is estimated to be ~150 kJ/m 3 .

36 MATERIALS SCIENCE↗

Charged pion form factor between Q{sup 2}=0.60 and 2.45 GeV{sup 2}. I. Measurements of the cross section for the {sup 1}H(e,e{sup '}{pi}{sup +})n reaction

Cross sections for the reaction {sup 1}H(e,e{sup '}{pi}{sup +})n were measured in Hall C at Thomas Jefferson National Accelerator Facility (JLab) using the high-intensity Continuous Electron Beam Accelerator Facility (CEBAF) to determine the charged pion form factor. Data were taken for central four-momentum transfers ranging from Q{sup 2}=0.60 to 2.45 GeV{sup 2} at an invariant mass of the virtual photon-nucleon system of W=1.95 and 2.22 GeV. The measured cross sections were separated into the four structure functions {sigma}{sub L},{sigma}{sub T},{sigma}{sub LT}, and {sigma}{sub TT}. The various parts of the experimental setup and the analysis steps are described in detail, including the calibrations and systematic studies, which were needed to obtain high-precision results. The different types of systematic uncertainties are also discussed. The results for the separated cross sections as a function of the Mandelstam variable t at the different values of Q{sup 2} are presented. Some global features of the data are discussed, and the data are compared with the results of some model calculations for the reaction {sup 1}H(e,e{sup '}{pi}{sup +})n.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of {phi} meson production in relativistic heavy-ion collisions at the BNL Relativistic Heavy Ion Collider (RHIC)

We present results for the measurement of {phi} meson production via its charged kaon decay channel {phi}{yields}K{sup +}K{sup -} in Au+Au collisions at {radical}(s{sub NN})=62.4,130, and 200 GeV, and in p+p and d+Au collisions at {radical}(s{sub NN})=200 GeV from the STAR experiment at the BNL Relativistic Heavy Ion Collider (RHIC). The midrapidity (|y|<0.5) {phi} meson transverse momentum (p{sub T}) spectra in central Au+Au collisions are found to be well described by a single exponential distribution. On the other hand, the p{sub T} spectra from p+p, d+Au, and peripheral Au+Au collisions show power-law tails at intermediate and high p{sub T} and are described better by Levy distributions. The constant {phi}/K{sup -} yield ratio vs beam species, collision centrality, and colliding energy is in contradiction with expectations from models having kaon coalescence as the dominant mechanism for {phi} production at RHIC. The {omega}/{phi} yield ratio as a function of p{sub T} is consistent with a model based on the recombination of thermal s quarks up to p{sub T}{approx}4 GeV/c, but disagrees at higher transverse momenta. The measured nuclear modification factor, R{sub dAu}, for the {phi} meson increases above unity at intermediate p{sub T}, similar to that for pions and protons, while R{sub AA} is suppressed due to the energy loss effect in central Au+Au collisions. Number of constituent quark scaling of both R{sub cp} and v{sub 2} for the {phi} meson with respect to other hadrons in Au+Au collisions at {radical}(s{sub NN})=200 GeV at intermediate p{sub T} is observed. These observations support quark coalescence as being the dominant mechanism of hadronization in the intermediate p{sub T} region at RHIC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identified particle production, azimuthal anisotropy, and interferometry measurements in Au+Au collisions at sq root(s{sub NN})=9.2 GeV

We present the first measurements of identified hadron production, azimuthal anisotropy, and pion interferometry from Au+Au collisions below the nominal injection energy at the BNL Relativistic Heavy-Ion Collider (RHIC) facility. The data were collected using the large acceptance solenoidal tracker at RHIC (STAR) detector at sq root(s{sub NN})=9.2 GeV from a test run of the collider in the year 2008. Midrapidity results on multiplicity density dN/dy in rapidity y, average transverse momentum <p{sub T}>, particle ratios, elliptic flow, and Hanbury-Brown-Twiss (HBT) radii are consistent with the corresponding results at similar sq root(s{sub NN}) from fixed-target experiments. Directed flow measurements are presented for both midrapidity and forward-rapidity regions. Furthermore the collision centrality dependence of identified particle dN/dy, <p{sub T}>, and particle ratios are discussed. These results also demonstrate that the capabilities of the STAR detector, although optimized for sq root(s{sub NN})=200 GeV, are suitable for the proposed QCD critical-point search and exploration of the QCD phase diagram at RHIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutron-induced fission cross section of {sup 234}U and {sup 237}Np measured at the CERN Neutron Time-of-Flight (n{sub T}OF) facility

A high-resolution measurement of the neutron-induced fission cross section of {sup 234}U and {sup 237}Np has been performed at the CERN Neutron Time-of-Flight facility. The cross sections have been determined in a wide energy range from 1 eV to 1 GeV using the evaluated {sup 235}U cross section as reference. In these measurements the energy determination for the {sup 234}U resonances could be improved, whereas previous discrepancies for the {sup 237}Np resonances were confirmed. New cross-section data are provided for high neutron energies that go beyond the limits of prior evaluations, obtaining important differences in the case of {sup 237}Np.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gluon correlations from a glasma flux-tube model compared to measured hadron correlations on transverse momentum (p{sub t},p{sub t}) and angular differences ({eta}{sub {Delta},{phi}{Delta}})

A glasma flux-tube model has been proposed to explain strong elongation on pseudorapidity {eta} of the same-side two-dimensional (2D) peak in minimum-bias angular correlations from {radical}(s{sub NN})=200 GeV Au-Au collisions. The same-side peak or ''soft ridge'' is said to arise from coupling of flux tubes to radial flow whereby gluons radiated transversely from flux tubes are boosted by radial flow to form a narrow structure or ridge on azimuth. In this study we test the theory conjecture by comparing measurements to predictions for particle production, spectra, and correlations from the glasma model and from conventional fragmentation processes. We conclude that the glasma model is contradicted by measured hadron yields, spectra, and correlations, whereas a two-component model of hadron production, including minimum-bias parton fragmentation, provides a quantitative description of most features of the data, although {eta} elongation of the same-side 2D peak remains undescribed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the E-mode polarization and temperature-E-mode correlation of the CMB from SPT-3G 2018 data

We present measurements of the E -mode ( E E ) polarization power spectrum and temperature- E -mode ( T E ) cross-power spectrum of the cosmic microwave background using data collected by SPT-3G, the latest instrument installed on the South Pole Telescope. This analysis uses observations of a 1500 deg 2 region at 95, 150, and 220 GHz taken over a four-month period in 2018. We report binned values of the E E and T E power spectra over the angular multipole range 300 ≤ ℓ < 3000 , using the multifrequency data to construct six semi-independent estimates of each power spectrum and their minimum-variance combination. These measurements improve upon the previous results of SPTpol across the multipole ranges 300 ≤ ℓ ≤ 1400 for E E and 300 ≤ ℓ ≤ 1700 for T E , resulting in constraints on cosmological parameters comparable to those from other current leading ground-based experiments. We find that the SPT-3G data set is well fit by a Λ CDM cosmological model with parameter constraints consistent with those from Planck and SPTpol data. From SPT-3G data alone, we find H 0 = 68.8 ± 1.5 km s - 1 Mpc - 1 and σ 8 = 0.789 ± 0.016 , with a gravitational lensing amplitude consistent with the Λ CDM prediction ( A L = 0.98 ± 0.12 ). We combine the SPT-3G and the Planck data sets and obtain joint constraints on the Λ CDM model. The volume of the 68% confidence region in six-dimensional Λ CDM parameter space is reduced by a factor of 1.5 compared to Planck-only constraints, with no significant shifts in central values. We note that the results presented here are obtained from data collected during just half of a typical observing season with only part of the focal plane operable, and that the active detector count has since nearly doubled for observations made with SPT-3G after 2018.

79 ASTRONOMY AND ASTROPHYSICS↗

Extraction of the Compton Form Factor H from DVCS measurements at Jefferson Lab

In the framework of Generalised Parton Distributions, we study the helicity-dependent and independent cross sections measured in Hall A and the beam spin asymmetries measured in Hall B at Jefferson Laboratory. We perform a global fit of these data and fits on each kinematical bin. We extract the real and imaginary parts of the Compton Form Factor $\mathcal{H}$ under the main hypothesis of dominance of the Generalised Parton Distribution $H$ and twist 2 accuracy. We discuss our results and compare to previous extractions as well as to the VGG model. We pay extra attention to the estimation of errors on the extraction of $\mathcal{H}$.

43 PARTICLE ACCELERATORS↗

Measurement of trilinear gauge boson couplings from WW+WZ{yields}l{nu}jj events in pp collisions at {radical}(s)=1.96 TeV

We present a direct measurement of trilinear gauge boson couplings at {gamma}WW and ZWW vertices in WW and WZ events produced in pp collisions at {radical}(s)=1.96 TeV. We consider events with one electron or muon, missing transverse energy, and at least two jets. The data were collected using the D0 detector and correspond to 1.1 fb{sup -1} of integrated luminosity. Considering two different relations between the couplings at the {gamma}WW and ZWW vertices, we measure these couplings at 68% C.L. to be {kappa}{sub {gamma}}=1.07{sub -0.29}{sup +0.26}, {lambda}=0.00{sub -0.06}{sup +0.06}, and g{sub 1}{sup Z}=1.04{sub -0.09}{sup +0.09} in a scenario respecting SU(2){sub L} x U(1){sub Y} gauge symmetry and {kappa}=1.04{sub -0.11}{sup +0.11} and {lambda}=0.00{sub -0.06}{sup +0.06} in an 'equal couplings' scenario.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of D0-D0bar Mixing using the Ratio of D0->K-pi and K-K Lifetimes

We measure the rate of D{sup 0}-{bar D}{sup 0} mixing with the observable y{sub CP} = ({tau}{sub K{pi}}/{tau}{sub KK}) - 1, where {tau}{sub KK} and {tau}{sub K{pi}} are respectively the mean lifetimes of CP-even D{sup 0} {yields} K{sup +}K{sup -} and CP-mixed D{sup 0} {yields} K{sup -}{pi}{sup +} decays, using a data sample of 384 fb{sup -1} collected by the BABAR detector at the SLAC PEP-II asymmetric-energy B Factory. From a sample of D{sup 0} and {bar D}{sup 0} decays where the initial flavor of the decaying meson is not determined, we obtain y{sub CP} = [1.12 {+-} 0.26(stat) {+-} 0.22(syst)]%, which excludes the no-mixing hypothesis at 3.3{sigma}, including both statistical and systematic uncertainties. This result is in good agreement with a previous BABAR measurement of y{sub CP} obtained from a sample of D*{sup +} {yields} D{sup 0}{pi}{sup +} events, where the D{sup 0} decays to K{sup -}{pi}{sup +}, K{sup +}K{sup -}, and {pi}{sup +}{pi}{sup -}, which is disjoint with the untagged D{sup 0} events used here. Combining the two results taking into account statistical and systematic uncertainties, where the systematic uncertainties are assumed to be 100% correlated, we find y{sub CP} = [1.16 {+-} 0.22(stat) {+-} 0.18(syst)]%, which excludes the no-mixing hypothesis at 4.1{sigma}.

43 PARTICLE ACCELERATORS↗

Measurement of the top quark mass in final states with two leptons

We present measurements of the top quark mass (m{sub t}) in tt candidate events with two final state leptons using 1 fb{sup -1} of data collected by the D0 experiment. Our data sample is selected by requiring two fully identified leptons or by relaxing one lepton requirement to an isolated track if at least one jet is tagged as a b jet. The top quark mass is extracted after reconstructing the event kinematics under the tt hypothesis using two methods. In the first method, we integrate over expected neutrino rapidity distributions, and in the second we calculate a weight for the possible top quark masses based on the observed particle momenta and the known parton distribution functions. We analyze 83 candidate events in the data and obtain m{sub t}=176.2{+-}4.8(stat){+-}2.1(sys) GeV and m{sub t}=173.2{+-}4.9(stat){+-}2.0(sys) GeV for the two methods, respectively. Accounting for correlations between the two methods, we combine the measurements to obtain m{sub t}=174.7{+-}4.4(stat){+-}2.0(sys) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the tt cross section using high-multiplicity jet events

We present a measurement of the tt cross section using high-multiplicity jet events produced in pp collisions at {radical}(s)=1.96 TeV. These data were recorded at the Fermilab Tevatron Collider with the D0 detector. Events with at least six jets, two of them identified as b jets, were selected from a 1 fb{sup -1} data set. The measured cross section, assuming a top quark mass of 175 GeV/c{sup 2}, is 6.9{+-}2.0 pb, in agreement with theoretical expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗