Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAXED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

The effect on soot and its gas precursors of doping ethylene with 2,2,4,6,6-pentamethyl-heptane in the nitrogen-fuel stream of a laminar non-premixed Planar Mixing Layer Flame (PMLF)

Synthetic Aviation Turbine Fuels (SATFs) are promising for reducing soot emissions from the aviation sector and diversifying Jet Fuel (JF) sources. Accurately predicting the combustion and emissions behavior of SATFs (and other JFs) necessitates robust experimental databases to elucidate the chemistry of long-chain iso-paraffins, which can compose up to two-thirds of SATF blends and whose behavior is considered to be well-represented by that of iso-dodecane isomers. Here, this study characterizes two laminar non-premixed Planar Mixing Layer Flames (PMLFs) with mild soot loads fueled by nitrogen-diluted ethylene, pure and doped with 2,2,4,6,6-pentamethyl-heptane, respectively. The two PMLFs have the same stoichiometric mixture fraction and total hydrocarbon mole fraction in the fuel stream (X F,F =X C2H4,F +X C12H26,F = 0.260), resulting in nearly the same maximum temperature (T max ≈1800 K) and simple identification of the effects of doping. Importantly, any horizontal PMLF cross-section has a self-similar structure that can be modeled as an equivalent One-Dimensional Counterflow Flame (1D-CF) with vanishingly small strain rate (a). The cross-section at a Height Above the Burner (HAB) of 50 mm is characterized in terms of C 0 -C 18 gas species using capillary sampling followed by GC-MS analyses. Laser-Induced Emission Spectroscopy (LIES) quantifies the soot volume fraction (ƒ v ) profiles at HAB=25 and 50 mm where Elastic Laser Light Scattering (E-LLS) is performed to determine the a of the equivalent 1D-CFs and the profile of the E-LLS equivalent diameter ( d 6,3 ) of soot. The substitution of 1500 ppm of ethylene with 2,2,4,6,6-pentamethyl-heptane causes an increase of ≈1.5 in the concentrations of several polycyclic aromatic hydrocarbons and fv. Concurrently, the measured d 6,3 doubles in the oxidizer stream, yet remains the same in the fuel stream, at HAB=50 mm. Instead, at HAB= 25 mm, the iso-dodecane doping does not affect the d 6,3 profile in either stream. The experimental results partially validate the chemical reactions and soot formation kinetic model developed at Lawrence Livermore National Laboratory and provide directions to further improve its predictions.

Iso-dodecane (2,2,4,6,6-Pentamethyl-Heptane)↗
DOE OSTI2026

Directional dependence of equilibrated TLD-400 chips in multiple radiation fields

Fielding of thermoluminescent dosimeters (TLDs) for measurement of photon radiation dose in experiments is the standard practice for γ-irradiation facilities, pulsed power x-ray facilities, and reactor facilities at Sandia National Laboratories (SNL). Due to the high-dose experimental conditions and the mixed ( 1 n, γ) fields in these facilities, SNL radiation metrologists have historically used CaF 2 :Mn TLDs (also known as TLD-400). Recent inquiries to the radiation metrology staff have raised concerns that the aluminum-equilibrated TLD-400 chips may exhibit a directionally dependent response. The metrologists were asked whether the dose measured by the chip may be impacted by the angle of incidence on the equilibrated TLD. To provide a thorough answer to this query, a set of adjoint Monte Carlo radiation transport calculations was performed for three different equilibrated TLDs as well as bare TLD chips using the Integrated Tiger Series (ITS) code. The key feature of the adjoint calculations performed in this study is that each photon escaping the modeled geometry was tallied into angular bins to provide information on both the energy and angular dependence of the equilibrated chip. After the adjoint Monte Carlo calculations were completed, the resulting energy-dependent response function for each angular bin was convolved with multiple photon energy spectra representing various radiation facilities at SNL. The radiation facilities selected for analysis span a range of photon energies from approximately 1 keV up to approximately 20 MeV. Thus, the presented results are applicable to a wide variety of radiation facilities around the world. Although the bare TLD-400 chip was expected to display the largest variation due to the photon angle of impact on the dosimeter, the dosimeter with the thinnest aluminum equilibrator (SNL thin equilibrated TLD-400) was determined to have the biggest differential between the impact angle with the maximum dose ( D max ) and the impact angle with the minimum dose ( D min ). However, the SNL normal equilibrated TLD-400 chip demonstrated a dramatic reduction in that differential between maximum and minimum dose angles. The reduction in this differential is one of the dominant factors in experimenters’ choice to field these dosimeters at SNL radiation facilities. The results from the PNNL (Hanford) energy-flattening field capsule are consistent with the previous publications. The differential dose responses due to the photon impact angle indicate that experimenters should strive to field their TLD-400 dosimeters in a consistent manner to avoid additional uncertainty in the measurements based on dosimeter orientation.

Adjoint radiation transport↗
DOE OSTI2021

Role of thermo-mechanical gyrations on the α/β interface stability in a Ti6Al4V AM alloy

Fluctuating energy distributions experienced during Additive Manufacturing yield an evolution of spatial and temporal transients within a part. In general, the in-situ monitoring of these transients is near to impossible during manufacturing. In order to then gain perspective into the impact on these localized thermo-mechanical transients on the interface stability, rapid thermo-mechanical reversals with known boundary conditions are imposed on an AM Ti6Al4V alloy which resulted in a phase transformation leading to an increased β phase stability. Our goal with this study is to comprehend the kinetics of this phase transformation with concepts of stored energy due to plastic strain accumulation and diffusion kinetics. Atom Probe Tomography is employed to study the partitioning of the solute elements across the interface. As expected, the thermo-mechanically cycled samples showed a reduced Vanadium concentration across the β phase. Finally, this concentration profile across the interface, alongside a full-width-half-max analysis, provided insight on the potential phase transformation kinetics involved in the α → β transformation subject to thermo- mechanical gyrations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Interplay of electronic structure, magnetism, strain, and defects in carbide $\mathrm{MX}$enes

We report the two-dimensional (2D) magnetic and semiconducting materials, including carbide MXenes, are in high demand for magneto-electronic devices and applications. Here, we report a first-principles study of electronic structure and magnetism of a Ti 2 C MXene, its derivatives Ti 2 CT 2 (T = -F, -O, -OH, -H), and the effect of single vacancy defects (25% C, 12.5% O, and 12.5% and 5.5% Ti) and transition metal (V, Cr, Mn, and Co) dopings. The MAX phase Ti 2 AlC is a non-magnetic (NM) metal which upon removal of Al layer forms a pristine Ti 2 C MXene with A-type antiferromagnetic (AFM) semiconductor having reliable transition temperature (T N = 41K) predicted by the Heisenberg model. All the functionalized MXenes are stable as NM metal except for Ti 2 CO 2 which remains semiconducting with NM ground state. The significant effect of spin–orbit coupling (SOC) is evident in the band structure forming Dirac-like cones and band inversions near the Fermi level. Depending upon the type of vacancy defects Ti 2 CO 2 is NM metal and ferromagnetic (FM) metal. The transition metal (TM) doped MXenes fulfill FM Stoner criterion. The V- and Co-doped MXenes are metals, whereas Cr- and Mn-doped are half-metal and semiconductor.

2D magnetism↗
DOE OSTI2022

A vorticity-based criterion to characterise leading edge dynamic stall onset

We propose a more conservative, physically-intuitive criterion, namely, the boundary enstrophy flux ( BEF), to characterise leading-edge-type dynamic stall onset in incompressible flows. Our results are based on wall-resolved large-eddy simulations of pitching aerofoils, with fine spatial and temporal resolution around stall onset. We observe that |BEF| reaches a maximum within the stall onset regime identified. By decomposing the contribution to BEF from the flow field, we find that the dominant contribution arises from the laminar leading edge region, due to the combined effect of large clockwise vorticity and favourable pressure gradient. A relatively small contribution originates from the transitional/turbulent laminar separation bubble (LSB) region, due to LSB-induced counter-clockwise vorticity and adverse pressure gradient. This results in BEF being nearly independent of the integration length as long as the region very close to the leading edge is included. This characteristic of BEF yields a major advantage in that the effect of partial or complete inclusion of the noisy LSB region can be filtered out, without changing the BEF peak location in time significantly. Next, we analytically relate BEF to the net wall shear and show that its critical value (=max(|BEF|) ) corresponds to the instant of maximum net shear prevailing at the wall. Finally, we have also compared BEF with the leading edge suction parameter ( LESP) and find that the former reaches its maximum value between 0.3° and 0.8° of rotation earlier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Size Dependent Optical Properties and Structure of ZnS Nanocrystals Prepared from a Library of Thioureas

Here, ZnS nanocrystals (λ max (1S e -1S 3/2h ) = 260 - 320 nm, d = 1.7 - 10.0 nm) are synthesized from Zn(O 2 CR) 2 (O 2 CR = tetra-decanoate, oleate and 2-hexyldecanoate), N,N'-disubstituted and N,N',N'-trisubstituted thioureas, and P,P,N-trisubstituted phos-phanecarbothioamides. The influence of precursor substitution, ligand sterics, and reaction temperature on the final nanocrystal size were evaluated. By using saturated hydrocarbon solvents and saturated aliphatic carboxylate ligands, polymeric byproducts could be avoided and pure ZnS nanocrystals isolated. Elevated temperatures, slower precursor conversion reactivity and branched zinc 2-hexyldecanoate yield the largest ZnS nanocrystals. Carefully purified zinc carboxylate, rapidly converting precursors, and cooling the synthesis mixture following complete precursor conversion provide quasi spherical nanocrystals with the narrowest shape dispersity. Nanocrystal sizes were measured using pair distribution function (PDF) analysis of X-ray scattering and scanning transmission electron microscopy (STEM) and plotted versus the energy of their first excitonic optical absorption. The resulting empirical relationship provides a useful method to characterize the nanocrystal size from 1.7-4.0 nm using optical absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Phase-Controllable Synthesis of Ultrathin Molybdenum Nitride Crystals Via Atomic Substitution of MoS 2

MXenes are emerging members in the two-dimensional (2D) material family and are highlighted by their high electrical conductivity. Among different MXenes, molybdenum-based MXenes, especially molybdenum nitrides (MoN x ), are rarely accessible through the common synthetic approach of selective etching due to the absence of stable MAX phase precursors. In this work, we apply the atomic substitution approach to synthesize two phases of ultrathin nonlayered molybdenum nitrides (i.e., Mo 5 N 6 and δ-MoN) from 1.6 to 42.9 nm thickness by converting layered MoS 2 under different temperatures. The morphology and 2D nature of MoS 2 are well remained in both phases. These newly created 2D materials are further characterized using Raman spectroscopy, high-resolution transmission electron microscopy, and electrical measurements, suggesting that both phases are highly crystalline and highly conductive down to the thickness of a few nanometers. Moreover, Ohmic contacts are formed between the ultrathin nitrides and Cr/Au electrodes, suggesting the great potential of the obtained nitrides for nanoelectronic device applications. The stability test shows that the Ohmic contact is well maintained after 4 weeks under ambient conditions with a slight degradation in conductivity. Furthermore, this study extends the 2D family by providing highly conductive members, offering desired building blocks for solid-state nanoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Transport of colloidal particles in microscopic porous medium analogs with surface charge heterogeneity: experiments and fundamental role of single-bead deposition

Understanding colloid transport in subsurface environments is challenging due to complex interactions between colloids, ground water, and porous media over several length scales. Here, we study the transport of colloidal particles through bead-assembled microfluidic porous media analogs (PMAs) with surface charge heterogeneity. The pore-scale dynamics of colloidal particle deposition were measured, as well as the breakthrough curves (BTC) and retention profiles (RP) of deposited colloidal particles at the scale of the entire PMA. From pore-scale experiments, the maximum surface coverage (?max = 0.51) was measured directly, from which the surface blocking function and deposition coefficient (kpore = 3.56 s-1) were obtained. Using these pore-scale parameters, the transport of colloidal particles was modeled using a one-dimensional advection-dispersion equation under the assumption of irreversible adsorption between oppositely charged beads and colloids, showing good agreement with experimental data. This work presents a new approach to fabricate chemically heterogeneous porous media in a microfluidic device that enables direct measurements of pore-scale colloidal deposition. The approach allows a quantitative prediction of colloidal breakthrough and retention via coupling of direct measurements and an advection-dispersion-deposition model.

Guo, Yang↗
DOE OSTI2022

Composition, Emissions, and Air Quality Impacts of Hazardous Air Pollutants in Unburned Natural Gas from Residential Stoves in California

The presence of hazardous air pollutants (HAPs) entrained in end-use natural gas (NG) is an understudied source of human health risks. We performed trace gas analyses on 185 unburned NG samples collected from 159 unique residential NG stoves across seven geographic regions in California. Our analyses commonly detected 12 HAPs with significant variability across region and gas utility. Mean regional benzene, toluene, ethylbenzene, and total xylenes (BTEX) concentrations in end-use NG ranged from 1.6–25 ppmv–benzene alone was detected in 99% of samples, and mean concentrations ranged from 0.7–12 ppmv (max: 66 ppmv). By applying previously reported NG and methane emission rates throughout California’s transmission, storage, and distribution systems, we estimated statewide benzene emissions of 4,200 (95% CI: 1,800–9,700) kg yr –1 that are currently not included in any statewide inventories–equal to the annual benzene emissions from nearly 60,000 light-duty gasoline vehicles. Additionally, we found that NG leakage from stoves and ovens while not in use can result in indoor benzene concentrations that can exceed the California Office of Environmental Health Hazard Assessment 8-h Reference Exposure Level of 0.94 ppbv–benzene concentrations comparable to environmental tobacco smoke. This study supports the need to further improve our understanding of leaked downstream NG as a source of health risk.

42 ENGINEERING↗
DOE OSTI2022

Steric and Lewis Basicity Influence of the Second Coordination Sphere on Electrocatalytic CO 2 Reduction by Manganese Bipyridyl Complexes

This study aims to provide a greater insight into the balance between steric (bpy vs (Ph) 2 bpy vs mes 2 bpy ligands) and Lewis basic ((Ph) 2 bpy vs (MeOPh) 2 bpy vs (MeSPh) 2 bpy ligands) influence on the efficiencies of the protonation-first vs reduction-first CO 2 reduction mechanisms with [Mn I (R 2 bpy)(CO) 3 (CH 3 CN)] + precatalysts, and on their respective transition-state geometries/energies for rate-determining C–OH bond cleavage toward CO evolution. The presence of only modest steric bulk at the 6,6'-diphenyl-2,2'-bipyridyl ((Ph) 2 bpy) ligand has here allowed unique insight into the mechanism of catalyst activation and CO 2 binding by navigating a perfect medium between the nonsterically encumbered bpy-based and the highly sterically encumbered mes2bpy-based precatalysts. Cyclic voltammetry conducted in CO 2 -saturated electrolyte for the (Ph) 2 bpy-based precatalyst [2-CH 3 CN] + confirms that CO 2 binding occurs at the two-electron-reduced activated catalyst [2] – in the absence of an excess proton source, in contrast to prior assumptions that all manganese catalysts require a strong acid for CO 2 binding. This observation is supported by computed free energies of the parent–child reaction for [Mn–Mn] o dimer formation, where increased steric hindrance relative to the bpy-based precatalyst correlates with favorable CO 2 binding. A critical balance must be adhered to, however, as the absence of steric bulk in the bpy-based precatalyst [1-CH 3 CN] + maintains a lower overpotential than [2-CH 3 CN] + at the protonation-first pathway with comparable kinetic performance, whereas an ~2-fold greater TOF max is observed at its reduction-first pathway with an almost identical overpotential as [2-CH 3 CN] + . Notably, excessive steric bulk in the mes2bpy-based precatalyst [3-CH 3 CN] + results in increased activation free energies of the C–OH bond cleavage transition states for both the protonation-first and the reduction-first pathways relative to both [1-CH 3 CN] + and [2-CH 3 CN] + . In fact, [3-CH 3 CN] + requires a 1 V window beyond its onset potential to reach its peak catalytic current, which is in contrast to the narrower (<0.30 V) potential response window of the remaining catalysts here studied. Furthermore, voltammetry recorded under 1 atm of CO 2 with 2.8 M (5%) H 2 O establishes [2-CH 3 CN] + to have the lowest overpotential (η = 0.75 V) in the series here studied, attributed to its ability to lie “on the fence” when providing sufficient steric bulk to hinder (but not prevent) [Mn–Mn] o dimerization, while simultaneously having a limited steric impact on the free energy of activation for the rate-determining C–OH bond cleavage transition state. While the methoxyphenyl bpy-based precatalyst [4-CH 3 CN] + possesses an increased steric presence relative to [2-CH 3 CN] + , this is offset by its capacity to stabilize the C–OH bond cleavage transition states of both the protonation-first and the reduction-first pathways by facilitating second coordination sphere H-bonding stabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrocatalytic Ammonia Oxidation with Coordinatively Saturated Ruthenium Catalyst

This communication describes the investigation of a coordinatively saturated complex [Ru(tpy)(dmabpy)Cl] + ([Ru(Cl)] + ) as an ammonia oxidation catalyst. Cyclic voltammetry measurements show an ideal S-shaped wave, indicating total catalysis conditions with a k obs (TOF max ) of 9360 h −1 . The reaction was found to be first-order in [Ru(Cl)] + and third-order in [NH 3 ]. Stoichiometric reactions of the one-electron oxidized species, [Ru(Cl)] 2+ , were monitored following the addition of 15 NH 3 using 1 H and 15 N NMR spectroscopy. These experiments showed that the chloride-coordinated complex rapidly converts NH 3 to N 2 . NMR spectroscopy and electrochemistry results definitively show that NH 3 does not substitute the Cl − ligand to form the previously reported [Ru(NH 3 )] 2+ catalyst which operates by a different mechanistic pathway. Taken together these results indicate outersphere electron transfer mediated ammonia oxidation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enabling Multireference Calculations on Multimetallic Systems with Graphic Processing Units

Modeling multimetallic systems efficiently enables faster prediction of desirable chemical properties and the design of new materials. This work describes an initial implementation for performing multireference wave function method localized active-space self-consistent field (LASSCF) calculations through the use of multiple graphics processing units (GPUs) to accelerate time-to-solution. Density fitting is leveraged to reduce memory requirements, and we demonstrate the ability to fully utilize multi-GPU compute nodes. Performance improvements of 5–10x in total application runtime were observed in LASSCF calculations for multimetallic catalyst systems up to 1200 AOs and an active space of (22e,40o) using up to four NVIDIA A100 GPUs. Furthermore, written with performance portability in mind, a comparable performance is also observed in early runs on the Aurora exascale system using Intel Max Series GPUs.

Algorithms↗
DOE OSTI2022

Radiation-Induced Long-Lived Transients and Metal Particle Formation in Solid KCl–MgCl 2 Mixtures

Here, the electron paramagnetic resonance and diffuse reflectance-optical absorption spectra of room-temperature γ-irradiated KCl–MgCl 2 binary solid salt mixtures (98:2 mol % and 2:98 mol %) and the eutectic (68:32 mol %) are reported. Additionally, powder X-ray diffraction of the pristine salts and thermal annealing studies of the irradiated salts were performed to evaluate the radiolysis product stability, annihilation, and association in metallic particles. The main long-lived transient species detected in 98:2 mol % KCl–MgCl 2 salts were perturbed F-centers, that is, trapped electrons (e t – ) in the vicinity of Mg ions (λ max at 561 nm), and the radiolytic reduction of Mg 2+ to Mg + and Mg 0 . Thermal annealing promoted the diffusion of defects to yield polycations (Mg n + ). On the other hand, irradiation of 2:98 mol % KCl/MgCl 2 salts showed the formation of cationic and neutral Mg dimers (Mg 2 + and Mg 2 ) and trimers as well as centers with a rhombic powder pattern apparently consisting of an electron shared between three Mg 2+ nuclei associated with an anion vacancy (ν a + –Mg 3 5+ ). Trapped electrons (e t – ) (F-centers) were not observed in the irradiated eutectic mixture; instead, Mg 2 , Mg 0 , and Cl 3 – were observed. It was observed that the higher temperature for thermal ionization of radiation-reduced Mg species decreased the extent of electron recombination reactions and the disproportionation of Cl 3 – compared to the pure KCl but enhanced the aggregation of Mg into larger metallic microstructures (metallic particles).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design of Atomic Ordering in Mo 2 Nb 2 C 3 T x MXenes for Hydrogen Evolution Electrocatalysis

The need for novel materials for energy storage and generation calls for chemical control at the atomic scale in nanomaterials. Ordered double-transition-metal MXenes expanded the chemical diversity of the family of atomically layered 2D materials since their discovery in 2015. However, atomistic tunability of ordered MXenes to achieve ideal composition-property relationships has not been yet possible. In this study, we demonstrate the synthesis of Mo 2+α Nb 2-α AlC 3 MAX phases (0 ≤ α ≤ 0.3) and confirm the preferential ordering behavior of Mo and Nb in the outer and inner M layers, respectively, using density functional theory, Rietveld refinement, and electron microscopy methods. We also synthesize their 2D derivative Mo 2+α Nb 2-α C 3 T x MXenes and exemplify the effect of preferential ordering on their hydrogen evolution reaction electrocatalytic behavior. In conclusion, this study seeks to inspire further exploration of the ordered double-transition-metal MXene family and contribute composition-behavior tools toward application-driven design of 2D materials.

2D materials↗
DOE OSTI2021

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe 1- x S x /CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe 1- x S x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm 2 ) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optimizing Catalysis by Combining Molecular Scaling Relationships: Iron Porphyrin-Catalyzed Electrochemical Oxygen Reduction as a Case Study

Here, the present work demonstrates the generality of molecular scaling relationships toward achieving faster catalysis at lower overpotentials. In iron porphyrin-catalyzed oxygen reduction, independent tuning of the catalyst E 1/2 and buffer pK a resulted in improvement of both the maximum turnover frequency (TOF max ) and the effective overpotential (η eff ). Interestingly, the most optimal system is achieved with the most reducing catalyst and a weak buffered acid—a perhaps counterintuitive conclusion. More generally, this study illustrates a path to optimization of catalytic systems through their differing responses to changes in the intrinsic features of the system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supramolecular Effects of Alkyl Sulfonates in Silver Nanocrystal Synthesis

While cationic surfactants such as hexadecyltrimethylammonium bromide (CTAB) are ubiquitous in the synthesis of noble metal nanocrystals, anionic surfactants are rarely used. This work explores the addition of sodium alkyl sulfonates with chain lengths ranging from one to eight carbons to a silver nanoplatelet reaction. Short-chain sulfonates comprised of one to four carbons show little effect on the nanocrystal synthesis, but alkyl sulfonates comprised of five or more carbons at concentrations above 1 mM have a pronounced effect on the absorbance of the nanocrystals, causing a blueshift in the wavelength of maximum absorbance (λ max ) from approximately 800 to 400 nm as the sulfonate concentration is increased to 7 mM. Higher concentrations of sulfonate result in a subsequent red-shift of the peak. Investigation into the possible formation mechanisms responsible for this synthetic control revealed the absence of sulfonate micelles under the reaction conditions. Instead, we hypothesize that sulfonate bilayers are nucleated around the silver nanocrystals at concentrations below the critical micelle concentration and interact with either the citrate ligands or the silver surface to influence nanocrystal morphology, and thus absorbance. Strikingly, the addition of long-chain alkyl sulfonates to already-synthesized nanocrystals results in similar changes to the nanocrystal absorbance that occur within seconds, providing further support for the proposal that these effects are related to the surface chemistry of the nanocrystals, which appear to be highly dynamic.

alkyls↗
DOE OSTI2025

Etching-Chemistry-Driven Ruthenium Doping on Ti 3 C 2 T x MXene for Optimizing Electrochemical Performance

We demonstrate that the etching chemistry used during MXene synthesis from Ti 3 AlC 2 MAX phase significantly influences surface functionalization and structural vacancies, which in turn affect ruthenium (Ru) ion interactions. Using hydrofluoric acid (HF) and ammonium bifluoride (NH 4 HF 2 ) as etchants, we obtained MXene surfaces with distinct functional groups and Ti vacancies that impact Ru ion interactions and electrochemical performance. Both MXene variants (labeled MX(H) and MX(N), respectively) exhibited negative zeta potentials in their pristine state, but upon the addition of Ru the zeta potential for MX(H) reached 12.9 mV while that for MX(N) remained negative at −6.4 mV. This adsorption resulted in a 14.4-fold increase in the specific capacitance of MX(H)/Ru compared to pristine MX(H), whereas MX(N)/Ru exhibited only a 4.4-fold increase over its pristine counterpart. X-ray diffraction analysis identified the formation of ammonium titanium oxide fluoride, (NH 4 ) 3 TiOF 5 , on MX(N), which likely contributed to its reduced Ru adsorption. X-ray photoelectron spectroscopy suggested the presence of Ti vacancies in both MXene variants; however, their behavior toward Ru accommodation differed markedly, with MX(H) showing the most obvious shift in the Ti 2p peak in the XPS survey spectrum, while MX(N) showed the most obvious shift in the C 1s peak. Electron paramagnetic resonance spectroscopy further demonstrated a distinct alteration in the spectral signatures of MX(H) upon Ru addition, in contrast to the negligible changes in MX(N), indicating effective passivation of the Ti defect sites in MX(H) via vacancy-assisted Ru doping. Cyclic voltammetry showed that Ru-incorporated MX(H) nanocomposites exhibit more efficient redox-active sites, as reflected in their higher capacitance values. These findings highlight the pivotal role of MXene surface chemistry in controlling cation adsorption, providing valuable insights for the rational design of high-performance electrodes.

2D surface engineering↗