Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Effect of SrO Doping on LaGaO 3 Synthesis via Magnetron Sputtering

The high temperature growth behavior of epitaxial LaGaO 3 thin films with and without SrO is determined with real-time X-ray scattering. In this study, we find SrO alters the thin film growth mode of LaGaO 3 , both when predeposited on a surface as well as when SrO and LaGaO 3 are codeposited. We also find that depositing a small amount of SrO on a LaGaO 3 surface induces significant structural rearrangement in the film. We describe mechanisms under which these transformations can occur. In conclusion, the strong effect of SrO on the microstructure of La 1–x Sr x GaO 3 likely has wider implications for other ionically conducting oxide materials.

36 MATERIALS SCIENCE↗

Competitive growth mechanisms of aluminum nitride thin films deposited by off-normal reactive magnetron sputtering

We have recently shown that AlN (0002) (c axis) is tilted abruptly toward the deposition direction as N{sub 2} concentration is increased in N{sub 2}/Ar sputtering gas mixtures. Here, we present a Monte Carlo simulation model to describe the phenomenon of sudden c-axis AlN tilt. The model is based on the assumption that AlN islands with their c axis parallel to substrate normal and AlN islands with tilted c axis coexist at the initial stages of the growth and they can provide the adatoms with different surface mobilities. It is believed that the adatom mobilities are quenched when N{sub 2} concentration reaches a certain amount in the reactive sputtering of AlN. Our model further assumes that adatom mobility differences on different islands result in a growth rate difference of the islands. At the initial stages of the growth, AlN islands with tilted c axis grow taller due to the lower adatom mobility on these islands. As they grow taller, they win the competition and stop the further growth of AlN islands with their c axis parallel to substrate normal due to shadowing effect. Monte Carlo simulations revealed that the shadowing effect combined with different adatom mobilities promotes the sudden c-axis tilt in AlN thin films.

36 MATERIALS SCIENCE↗

Effect of Post-deposition Annealing on the Physical Properties of DC Magnetron Sputtered Molybdenum Oxide Films

Molybdenum oxide films were deposited on glass and single crystal silicon substrates held at room temperature by sputtering of molybdenum target in an oxygen partial pressure of 2xl0{sup -4} mbar. The MoO{sub 3} films were annealed in oxygen atmosphere at various temperatures in the range 473-673 K. The effect of annealing temperature on the structure, chemical binding configuration, and optical properties of the MoO{sub 3} films was studied. The X-ray diffraction studies revealed that the as-deposited MoO{sub 3} films were amorphous. It crystallizes into a layered orthorhombic phase by the post-deposition annealing at a temperature of 673 K. The Fourier transform infrared spectrum of the MoO{sub 3} films annealed at 473 K exhibits the absorption bands at 560, 840 and 995 cm{sup -1} related to the active stretching modes of MoO{sub 6} octahedra. When the films annealed at 673 K the intensity of the absorption band observed at 560 cm{sup -1} diminished and the band of 995 cm{sup -1} split into two bands of 995 and 1010 cm{sup -1} which are related to the zig--zag rows of layered structure of MoO{sub 3}. The optical band gap of the as-deposited and annealed films was 3.07 and 3.20 eV respectively. The refractive index increased with increase of annealing temperature.

36 MATERIALS SCIENCE↗

High rate reactive magnetron sputter deposition of titanium oxide

A systematic experimental study of reactive sputtering from substoichiometric targets of TiO{sub x} with x ranging from 0 to 1.75 is reported. Experimental results are compared with results from modeling. The developed model describes the observed behavior and explains the origins of the unexpectedly high deposition rate. The behavior is shown to originate from the presence of titanium suboxides at the target surface caused by preferential sputtering of the oxide. The model can be used for optimization of the target composition with respect to the deposition rate and film composition in a stable hysteresis-free reactive sputtering process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoluminescence and positron annihilation spectroscopy investigation of (Ge, Er) codoped Si oxides deposited by magnetron sputtering

We have investigated the nature of violet-blue emission from (Ge, Er) codoped Si oxides (Ge+Er+SiO{sub 2}) using photoluminescence (PL) and positron annihilation spectroscopy (PAS) measurements. The PL spectra and PAS analysis for a control Ge-doped SiO{sub 2} (Ge+SiO{sub 2}) indicate that Ge-associated neutral oxygen vacancies (Ge-NOV) are likely responsible for the major emission in the violet-blue band. For Ge+Er+SiO{sub 2}, both Ge-NOV and GeO color centers are believed to be responsible for the emission band. The addition of Er has a significant influence on the emission, which is discussed in terms of Er-concentration-related structural change in the Ge+Er+SiO{sub 2}.

36 MATERIALS SCIENCE↗

The influence of substrate temperature and Al mobility on the microstructural evolution of magnetron sputtered ternary Ti-Al-N thin films

Ternary Ti-Al-N films were deposited onto Al{sub 2}O{sub 3} (0001) substrates by reactive cosputtering from elemental Ti and Al targets and analyzed by in situ and ex situ x-ray scattering, Rutherford backscattering spectroscopy, transmission electron microscopy, and x-ray photoemission spectroscopy. The deposition parameters were set to values that yield Ti:Al:N ratios of 2:1:1 and 4:1:3 at room temperature. 2TiAlN depositions at 675 deg. C result in epitaxial Ti{sub 2}AlN growth with basal planes parallel to the substrate surface. Nominal 4TiAl3N depositions at 675 deg. C and above, however, yield domain growth of TiN and Ti{sub 2}AlN due to Al loss to the vacuum. Depositions at a lower temperature of 600 deg. C yield films with correct 4:1:3 stoichiometry, but Ti{sub 4}AlN{sub 3} formation is prevented, supposedly by insufficient adatom mobility. Instead, an incoherent Ti{sub n+1}AlN{sub n} structure with random twinned stacking sequences n is obtained that exhibits both basal plane orientations parallel and nearly perpendicular to the substrate interface. X-ray photoemission spectroscopy shows that in contrast to stoichiometric nitrides the Al is metallically bonded and hence acts as twinning plane within the Ti{sub n+1}AlN{sub n} stackings. Domains with perpendicular basal plane orientation overgrow those with parallel orientation in a competitive growth mode. The resulting morphology is a combination of smooth-surface parallel-basal-plane-oriented domains interrupted by repeated facetted hillocklike features with perpendicular basal plane orientation.

36 MATERIALS SCIENCE↗

Modeling metallic nanoparticle synthesis in a magnetron-based nanocluster source by gas condensation of a sputtered vapor

Copper nanoparticles (NPs) were synthesized by inert-gas condensation of a sputtered metallic vapor using a dedicated commercial reactor. By controlling the time of residence of NPs in the carrier gas phase via the tuning of the collision path length, Cu NPs were produced. They exhibit various and well controlled diameters (3-10 nm) and a relatively narrow size dispersion. On the basis of these experimental results, a detailed modeling of NP nucleation and growth based on the classical nucleation theory was developed. It takes into account the peculiar geometry and thermal profile of the NP reactor. The simulated curves, calculated by a MATLAB program developed for that purpose, exhibit a good qualitative agreement with experiment. Moreover, they highlight the role of process parameters and the strong influence of the reactor temperature profile on the NP size distribution. In the future, such calculations could be used for the optimization of the NP source design in order to increase its efficiency and reproducibility.

36 MATERIALS SCIENCE↗

Size controlled synthesis of Ge nanocrystals in SiO{sub 2} at temperatures below 400 deg. C using magnetron sputtering

A simple and silicon process-compatible technique is reported for the synthesis of Ge nanocrystals (Ge-ncs) at low temperatures below 400 deg. C, which is much lower than the typical growth temperatures. The Ge-ncs were found to form only within a temperature window between 350 and 420 deg. C. The underlying mechanism has been explained by a competitive process between Volmer-Weber growth and oxidation reaction. We further implemented this technique in the fabrication of multilayered Ge-ncs which exhibited controllable crystallite size with high crystallization quality. The low temperature technique developed in this work would allow production of Ge-ncs and relative devices on low cost substrates, such as glass.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The dislocation density and twin-boundary frequency determined by X-ray peak profile analysis in cold rolled magnetron-sputter deposited nanotwinned copper

The dislocation density and the average twin boundary frequency is determined quantitatively in as-deposited and cold-rolled nanotwinned Cu thin films by high-resolution X-ray line profile analysis. After cold-rolling the dislocation density increases considerably, whereas the twin boundary frequency decreases only slightly. The physical parameters of the substructure provided by the quantitative X-ray analysis are in agreement with earlier transmission electron microscopy observations. The flow stress of the as-deposited and the cold-rolled films is directly correlated with the average thickness of twin lamellae and the dislocation density by taking into account the Hall-Petch and Taylor type strengthening mechanisms.

36 MATERIALS SCIENCE↗

Effect of buffer layer growth temperature on epitaxial GaN films deposited by magnetron sputtering

Epitaxial GaN films were deposited by reactive sputtering of a GaAs target in 100 % nitrogen at 700 deg. C on ZnO buffer layers grown at different substrate temperatures over sapphire substrates. High resolution X-ray diffraction measurements and the corresponding analysis show that the growth temperature of buffer layers significantly affects the micro-structural parameters of GaN epilayer, such as lateral coherence length, tilt and twist, while the vertical coherence length remains unaffected. The optimum substrate temperature for buffer layer growth has been found to be 300 deg. C. High epitaxial quality GaN film grown on such a buffer layer exhibited micro strain of 1.8x10{sup -4} along with screw and edge type dislocation densities of 7.87x10{sup 9} and 1.16x10{sup 11}, respectively.

36 MATERIALS SCIENCE↗

Oxygen partial pressure influenced structural and optical properties of DC magnetron sputtered ZrO{sub 2} films

Thin films of zirconium oxide (ZrO{sub 2}) were deposited on (100) p-silicon and quartz substrates by sputtering of metallic zirconium target under different oxygen partial pressures in the range 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa. The effect of oxygen partial pressure on the structural and optical properties of the deposited films was systematically investigated. The deposition rate of the films decreased from 3.3 to 1.83 nm/min with the increase of oxygen partial pressure from 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa respectively. The X-ray diffraction profiles revealed that the films exhibit (111) refection of zirconium oxide in monoclinic phase. The optical band gap of the films increased from 5.62 to 5.80 eV and refractive index increased from 2.01 to 2.08 with the increase of oxygen partial pressure from 8 Multiplication-Sign 10{sup -3}-6 Multiplication-Sign 10{sup -2}Pa respectively.

36 MATERIALS SCIENCE↗

Study of optical properties of asymmetric bipolar pulse DC magnetron sputtered Ta{sub 2}O{sub 5} thin film as a function of oxygen content in deposition ambient

Tantalum penta-oxide thin films have been deposited by reactive sputtering technique using asymmetric bipolar pulsed DC source at various oxygen percentage viz. 0 to 50 %. The optical properties of the films have been studied by spectroscopic ellipsometry measurements. It has been observed that compact films with low void fraction, high refractive index and band gap can be obtained by the above technique with oxygen percentage in the range of 30–40%. The films deposited with zero or very low oxygen content have high deposition rate and yield metal rich films with large voids, defects, low band gap and high refractive index. Similarly films deposited with >40% oxygen content again contain voids and defects due to the presence of large amount of gas molecules in the sputtering ambient.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of ITO/SiO{sub x}/n-Si solar cells with non-decline potential field and hole tunneling by magnetron sputtering

Complete photo-generated minority carrier's quantum tunneling device under AM1.5 illumination is fabricated by depositing tin-doped indium oxide (ITO) on n-type silicon to form a structure of ITO/SiO{sub x}/n-Si heterojunction. The work function difference between ITO and n-Si materials essentially acts as the origin of built-in-field. Basing on the measured value of internal potential (V{sub bi} = 0.61 V) and high conversion efficiency (9.27%), we infer that this larger photo-generated holes tunneling occurs when a strong inversion layer at the c-Si surface appears. Also, the mixed electronic states in the ultra-thin intermediate region between ITO and n-Si play a defect-assisted tunneling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗