Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SHIELDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Upgrade of the gas flow control system of the resistive current leads of the LHC inner triplet magnets: Simulation and experimental validation

The 600 A and 120 A circuits of the inner triplet magnets of the Large Hadron Collider are powered by resistive gas cooled current leads. The current solution for controlling the gas flow of these leads has shown severe operability limitations. In order to allow a more precise and more reliable control of the cooling gas flow, new flowmeters will be installed during the first long shutdown of the LHC. Because of the high level of radiation in the area next to the current leads, the flowmeters will be installed in shielded areas located up to 50 m away from the current leads. The control valves being located next to the current leads, this configuration leads to long piping between the valves and the flowmeters. In order to determine its dynamic behaviour, the proposed system was simulated with a numerical model and validated with experimental measurements performed on a dedicated test bench.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Hidden magnetic order in plutonium dioxide nuclear fuel

The magnetic structure of PuO 2 has been investigated by computational methods. A hereto unknown longitudinal 3k AFM ground-state that retains $Fm\bar{3}m$ crystal symmetry has been identified.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a bunched beam electron cooler for the Jefferson Lab electron-ion collider

Jefferson Lab is in the process of designing an electron-ion collider with unprecedented luminosity at a 65 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. We will present a new design for a Circulator Cooler Ring for bunched-beam electron cooling. This requires the generation and transport of very high-charge magnetized bunches, acceleration of the bunches in an energy recovery linac, and transfer of these bunches to a circulating ring that passes the bunches 11 times through the proton or ion beam inside cooling solenoids. This design requires the suppression of the effects of space charge and coherent synchrotron radiation using shielding and RF compensation.

Benson, Stephen V.↗

Formation of thin bifurcated current sheets by quasisteady compression

Thin current sheets with half-widths in the range of about 10 or less ion inertial lengths (or ion gyroradii) have been identified as the sites of important dynamical phenomena in space plasmas. Recent space observations established that thin current sheets often have a bifurcated (double-peaked) current density. Earlier suggestions of possible bifurcation mechanisms are based on the presence of microfluctuations, magnetic reconnection, or a normal magnetic field component or assumed simplified models of adiabatic dynamics. Despite these efforts, the cause (or causes) of the formation of thin bifurcated current sheets and the conditions under which they form have remained unclear. In this paper, we identify quasisteady compression of a plane, initially wide collisionless current sheet as an effective physical mechanism for the formation of thin bifurcated current sheets. Our main tool is electromagnetic particle simulation. The initial sheet has a singly peaked current and a half-width that is five times larger than the ion inertial length. This sheet is quasisteadily compressed by external forces. A three-scale structure develops and the current bifurcates during compression. It is shown that the bifurcation, pressure anisotropy, and other major properties of the embedded current sheet can be understood in terms of basic physical principles, such as electric field shielding and momentum conservation. Sufficient conditions for bifurcation of symmetric current sheets are presented. They suggest that bifurcation must generally occur by quasisteady compression if the (singly peaked) initial current sheet is sufficiently wide.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Permanent magnetism of intermetallic compounds between light and heavy transition-metal elements

First-principle calculations are used to investigate the intrinsic magnetic properties of intermetallic alloys of the type XMn, where X is a 4d or 5d element and M is Fe or Co. Emphasis is on the hexagonal C14 Laves-phase 1:2 and 1:5 alloys, the latter crystallizing in the CaCu5 structure. These series are of interest in permanent magnetism from fundamental and practical viewpoints, respectively. In the former, the unit cells form a prototypical motif where a heavy atom with high spin-orbit coupling and magnetocrystalline anisotropy is surrounded by many somewhat smaller M atoms with high magnetization, and the latter are Laves-phase derivatives of renewed interest in permanent magnetism. Our DFT calculations predict magnetic moments, magnetizations and anisotropies, as well as formation energies. The results are analyzed across the 4d and 5d series, especially with respect to hybridization effects between 3d and 4d/5d bands.

Kumar, P↗

Elasto-Magnetocaloric Effect

Refrigeration based on the magnetocaloric effect promises high efficiency and zero emis-sion of global warming gases. However, magnetic refrigeration is inherently expensive be-cause the refridgerent must experience a large change of applied magnetic field (>1.5 T) to achieve any useful cooling. High costs will arise from the high field requirement, which can only be efficiently obtained using expensive rare earth permanent magnets. This lack of cost-effectiveness is the major obstacle limiting magnetocaloric refrigeration from wide industrial and commercial applications. Despite active research efforts, new magneto-caloric materials that require less magnetic field have not yet been reported. Here, we show that cost concerns can be mitigated via a new energy pathway predicted by the thermody-namic phenomenon termed the elasto-magnetoclaoric effect: It is known that the transfor-mation temperatures of first order martensitic phase transformations and second order magnetic transformations can be shifted by elastic and magnetic fields, respectively. In ferromagnetic shape memory alloys these order parameters are coupled. We realized that this coupling will enable us to mechanically induce both transformations simultaneously, thereby attaining a large change in the magnetic entropy that otherwise requires a large magnetic field. In addition the release of latent heat, which the material will absorb once the stress is removed, would provide a welcome enhancement of the cooling capacity.

magnetocaloric↗

Development of versatile multiaperture negative ion sources

Enhancement of negative ion sources for production of large ion beams is a very active research field nowadays, driven from demand of plasma heating in nuclear fusion devices and accelerator applications. As a versatile test bench, the ion source NIO1 (Negative Ion Optimization 1) is being commissioned by Consorzio RFX and INFN. The nominal beam current of 135 mA at −60 kV is divided into 9 beamlets, with multiaperture extraction electrodes. The plasma is sustained by a 2 MHz radiofrequency power supply, with a standard matching box. A High Voltage Deck (HVD) placed inside the lead shielding surrounding NIO1 contains the radiofrequency generator, the gas control, electronics and power supplies for the ion source. An autonomous closed circuit water cooling system was installed for the whole system, with a branch towards the HVD, using carefully optimized helical tubing. Insulation transformer is installed in a nearby box. Tests of several magnetic configurations can be performed. Status of experiments, measured spectra and plasma luminosity are described. Upgrades of magnetic filter, beam calorimeter and extraction grid and related theoretical issues are reviewed.

43 PARTICLE ACCELERATORS↗

Electrostatic Design and Characterization of a 200 keV Photogun and Wien Spin Rotator

High-energy nuclear physics experiments at the Jefferson Lab Continuous Electron Beam Accelerator Facility (CEBAF) require high spin-polarization electron beams produced from strained super-lattice GaAs photocathodes activated to negative electron affinity in a high voltage photogun operating at 130 kV dc. A pair of Wien filter spin rotators in the injector provides precise control of the electron beam polarization at the end station target. An upgrade of the CEBAF injector to better support the upcoming Moller experiment requires increasing the electron beam energy to 200 keV, resulting in better transmission through injector apertures and improved photocathode lifetime. In addition, the energy increase is expected to reduce unwanted helicity correlated intensity and position systematics. These requirements led to the design of a shielding electrode described in this work, which minimizes the electric field at the triple-point junction and linearizes the potential along the insulator, thus reducing the risk of field emission induced insulator arcing. The Wien spin rotator design was modified for increasing the electric field from 1.6 to 2.7 MV/m and the magnetic field from 9.1 to 13 mT. The upgrades required detailed modeling in Solidworks, electrostatic simulations using CST, beam dynamics using GPT, device implementation, and in situ high voltage characterization of the world?s first 200 keV polarized photoelectron gun and compatible Wien filter spin rotator.

Palacios-Serrano, Gabriel↗

Commissioning and First Operation of Superconducting Links at the Large Hadron Collider (LHC)

The Large Hadron Collider (LHC) now under commissioning at CERN is a 26.7 km collider based on several thousand high-field superconducting magnets, the majority of which operating in superfluid helium below 2 K and some isolated magnets operating i n normal helium at 4.5 K. Four superconducting links (DSLs) of about 76 m in length and one of about 517 m in length, were designed, constructed and installed over a three year period. Their purpose is to transport current over long distances whenever und erground LHC space constraints prevents to put power converters, current feed boxes and magnets in each others' proximity. The four 76 m long DSLs transport current between current feed boxes and several of the isolated magnets, whereas the 517 m long DSL transports current between two current feed boxes. The links are comprised of cryogenic, vacuum-insulated, transfer lines housing one or more superconducting cables. The operating temperatures are about 5 K for the DSL part that houses the cable and abou t 60 K for the heat shield. Their commissioning and performance results at first operational experience in the beginning of 2008 are discussed.

43 PARTICLE ACCELERATORS↗

Hysteresis and relaxation in granular permanent magnets

Some nontrivial aspects of the magnetic and structural characterization of hard-magnetic nanoparticles are investigated. Dilute ensembles are well-described by mean-field theory, although there is an asymmetry between exchange and magnetostatic interaction fields. Corrections to the mean-field approximation are caused by cooperative effects and have the character of Onsager reaction fields, which are much stronger in micromagnetism than in atomic-scale magnetism. The slow dynamics of zero-field-cooled (ZFC) magnetization curves is strongly affected by the particles' magnetic anisotropy, which reduces the corresponding energy-barrier height from 25 to 19.1 k(B)T. (C) 2012 American Institute of Physics. [doi:10.1063/1.3672845]

Skomski, R↗

Magnetic and Structural Properties of Rapidly Quenched Tetragonal Mn3-xGa Nanostructures

Nanostructured Mn3-x Ga ribbons with x = 0, 0.4, 0.9 and 1.1 were prepared using arc-melting, melt-spinning and annealing. As-spun samples crystallized into hexagonal D0(19) and cubic L2(1) Heusler crystal structures based on the concentration of Mn in Mn3-xGa. Upon vacuum-annealing the samples at 450 degrees C for about 50 hours, both the hexagonal and cubic structures transformed into a tetragonal D0(22) structure. High-temperature x-ray diffraction and high-temperature magnetometry showed that the samples with low Mn content (Mn-1.9 Ga and Mn-2.1 Ga) retain their tetragonal structure up to 850 K but the samples with high Mn concentrations (Mn-2.6 Ga and Mn-3.0 Ga) undergo a structural phase transition from tetragonal to hexagonal phases around 800 K. The magnetic properties of Mn3-x Ga ribbons were very sensitive to Mn concentration, where the magnetization and anisotropy energy increased and the coercivity decreased as x increased from 0 to 1.1. Although the Curie temperatures of Mn-2.6 Ga and Mn-3.0 Ga samples could not be determined because of the structural phase transition, the Curie temperature decreased with increasing x in Mn3-x Ga. The maximum magnetization of 57 emu/g (300 emu/cm(3)) and the coercivity of 6.5 kOe were measured in the Mn-1.9 Ga and Mn-3.0 Ga ribbons, respectively.

Huh, Y↗

Development and intrinsic properties of hexagonal ferromagnetic (Zr,Ti)Fe{sub 2}

Nanocrystalline Ti{sub 0.75}Zr{sub 0.25}Fe{sub 2+x} (x = 0-0.4) and Ti{sub 0.75−y}B{sub y}Zr{sub 0.25}Fe{sub 2.4} (y = 0-0.35) with high saturation magnetization have been fabricated by the melt-spinning technique. Nanocrystalline Ti{sub 0.75}Zr{sub 0.25}Fe{sub 2+x} consists of the hexagonal C14 Laves phase (Ti,Zr)Fe{sub 2}. Fe addition decreases the lattice parameter a and shrinks the cell volume. The antiferromagnetic Fe-Fe interactions may decrease with the increase of x, leading to a significant enhancement of saturation polarization (J{sub s}) and Curie temperature (T{sub c}). The magnetocrystalline anisotropy constant K also increases with increasing x. Excessive Fe addition (x > 0.25) may induce structural disorder which lowers the J{sub s} and T{sub c}. Nanocrystalline Ti{sub 0.75−y}B{sub y}Zr{sub 0.25}Fe{sub 2.4} is composed of hexagonal (Ti,Zr)Fe{sub 2} and Fe-rich amorphous phases with relatively high J{sub s}. The lattice parameters a, c and cell volume V are almost unchanged with the increase of y for y ≥ 0.16. Simultaneously, the T{sub c} of (Ti,Zr)Fe{sub 2} remains unchanged, indicating that B does not enter this lattice but takes part in forming the amorphous phase, in good agreement with the X-ray diffraction results. The volume fraction of the amorphous phase increases with the increase of B content and results in a large enhancement of J{sub s} up to 10.8 kG. Further B addition (y > 0.30) decreases J{sub s}, possibly due to the decrease of the J{sub s} of the amorphous phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation, characterization and microwave absorption properties of polyaniline/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite

The polyaniline (PAni)/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was prepared by an in situ polymerization in an aqueous solution. The products were characterized by Fourier transform infrared (FT-IR) spectrometer, ultraviolet-visible (UV-vis) spectrometer, X-ray diffraction (XRD) and transmission electron microscope (TEM). The average particle size of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} was estimated to be about 70 nm by TEM. The reflection loss (dB) of the nanocomposite was measured at different microwave frequencies in X-band (8.2-12.4 GHz), U-band (12.4-18 GHz) and K-band (18-26.5 GHz) by radar cross-section (RCS) method according to the national standard GJB-2038-94. The results showed the reflection loss of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was higher than that of the PAni. The maximum reflection loss of the PAni/Co{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} nanocomposite was about -39.9 dB at 22.4 GHz with a bandwidth of 5 GHz (full frequency width at about a half of the peak response). In conclusion, this sample is a good microwave shielding and absorbing materials at higher frequency.

36 MATERIALS SCIENCE↗

L1 0 structure formation in slow-cooled Fe-Au nanoclusters

An ordered L1 0 structure has been formed in near-stoichiometric Fe-Au alloy nanoparticles. The L1 0 structure with a = 0.367 nm and c = 0.360 nm was observed in nanoclusters with diameters below 10 nm after slow cooling from 600 °C. The stable L1 0 structure formed from a parent fcc solid solution phase observed in the as-formed clusters. The fcc phase has a lattice parameter of 0.417 nm, significantly expanded compared to both Au and γ-Fe. The saturation magnetization and coercivity of both fcc and L1 0 structures were much lower than expected considering Fe dilution effects suggesting competing ferromagnetic and anti-ferromagnetic ordering.

36 MATERIALS SCIENCE↗

Effect of energy and momentum conservation on fluid resonances for resonant magnetic perturbations in a tokamak

In this paper, the impact of momentum and energy conservation of the collision operator in the kinetic description for Resonant Magnetic Perturbations (RMPs) in a tokamak is studied. The particle conserving differential collision operator of Ornstein-Uhlenbeck type is supplemented with integral parts such that energy and momentum are conserved. The application to RMP penetration in a tokamak shows that energy conservation in the electron collision operator is important for the quantitative description of plasma shielding effects at the resonant surface. On the other hand, momentum conservation in the ion collision operator does not significantly change the results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

System-on-chip upgrade of millimeter-wave imaging diagnostics for fusion plasma

Monolithic, millimeter wave “system-on-chip” technology has been employed in chip heterodyne radiometers in a newly developed Electron Cyclotron Emission Imaging (ECEI) system on the DIII-D tokamak for 2D electron temperature and fluctuation diagnostics. The system employs 20 horn-waveguide receiver modules each with customized W-band (75–110 GHz) monolithic microwave integrated circuit chips comprising a W-band low noise amplifier, a balanced mixer, a ×2 local oscillator (LO) frequency doubler, and two intermediate frequency amplifier stages in each module. Compared to previous quasi-optical ECEI arrays with Schottky mixer diodes mounted on planar antennas, the upgraded W-band array exhibits >30 dB additional gain and 20× improvement in noise temperature; an internal eight times multiplier chain is used to provide LO coupling, thereby eliminating the need for quasi-optical coupling. The horn-waveguide shielding housing avoids out-of-band noise interference on each module. The upgraded ECEI system plays an important role for absolute electron temperature and fluctuation measurements for edge and core region transport physics studies. An F-band receiver chip (up to 140 GHz) is under development for additional fusion facilities with a higher toroidal magnetic field. Visualization diagnostics provide multi-scale and multi-dimensional data in plasma profile evolution. Finally, a significant aspect of imaging measurement is focusing on artificial intelligence for science applications.

47 OTHER INSTRUMENTATION↗

MHD Analysis of Dual-Coolant Lead-Lithium Blanket for Spherical Tokamak Advanced Reactor

The tritium breeding blanket is vital for future fusion power plants, with the Spherical Tokamak Advanced Reactor (STAR) project highlighting the dual-coolant lead-lithium (DCLL) design. The DCLL blanket performs shielding, energy exhaust, and tritium breeding using a lead-lithium alloy , with lithium as the breeder and lead as the neutron multiplier. It also serves as the primary coolant, with helium providing supplemental cooling. Reduced-activation ferritic/martensitic steel is used for the blanket structure. Magnetohydrodynamic (MHD) phenomena influence the liquid metal flow in a magnetic field, affecting heat transfer in the breeder affected by energetic neutrons. Understanding key flow parameters in such conditions is critical for efficient DCLL design. This study uses three-dimensional thermofluid MHD analysis with ANSYS CFX software, modified at Princeton Plasma Physics Laboratory, to simulate high Hartmann flows. The neutronics code MCNP, coupled with plasma equilibrium, provides heat source distribution. In conclusion, we examine electromagnetic interactions in adjacent fluid domains and analyze the magnetic field’s impact on flow distribution in the inboard and outboard blanket layout, using detailed mesh generation for accurate results.

DCLL↗

Negative ion production and beam extraction processes in a large ion source (invited)

Recent research results on negative-ion-rich plasmas in a large negative ion source have been reviewed. Spatial density and flow distributions of negative hydrogen ions (H{sup −}) and positive hydrogen ions together with those of electrons are investigated with a 4-pin probe and a photodetachment (PD) signal of a Langmuir probe. The PD signal is converted to local H{sup −} density from signal calibration to a scanning cavity ring down PD measurement. Introduction of Cs changes the slope of plasma potential local distribution depending upon the plasma grid bias. A higher electron density H{sub 2} plasma locally shields the bias potential and behaves like a metallic free electron gas. On the other hand, the bias and extraction electric fields penetrate in a Cs-seeded electronegative plasma even when the electron density is similar. Electrons are transported by the penetrated electric fields from the driver region along and across the filter and electron deflection magnetic fields. Plasma ions exhibited a completely different response against the penetration of electric fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗