Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

The MECA Payload as an Exobiology Laboratory on the MSP 2001 Lander

The "Mars Environmental Compatibility Assessment" (MECA) payload for Mars Surveyor Project 2001 (MSP 2001) is comprised of a multifunctional laboratory equipped to assess martian soil properties with wet chemistry, camera imagery, optical microscopy (potentially with UV fluorescence capability), atomic force microscopy (AFM; potentially with mineral-discrimination capabilities), electrometry, active & passive external materials-test panels, mineral hardness testing, and electrostatic and magnetic materials testing. Additionally, evaluation of soil chemical and physical properties as a function of depth down to -50 cm will be facilitated by the Lander/MECA robot arm on which the camera (RAC) and electrometer are mounted. MECA was designed as a NASA Human Exploration and Development of Space (HEDS) payload for determining the properties of martian soil that may be detrimental to human exploration. It is, however, well equipped to address exobiology questions in the following areas: (1)Geochemical clues to Aqueous Mineralogy and Oxidant formation; (2) Soil structures and microfabrics as indicators of water-volatiles migration; (3) Minerals and rocks as clues to ancient hydrology; (4) Grain textures as indicators of aqueous activity and weathering. Additional information is contained in the original.

Marshall, J.↗
NASA NTRS2012

Magnetic Testing, and Modeling, Simulation and Analysis for Space Applications

The Aerospace Corporation (Aerospace) and Lockheed Martin Space Systems (LMSS) participated with Jet Propulsion Laboratory (JPL) in the implementation of a magnetic cleanliness program of the NASA/JPL JUNO mission. The magnetic cleanliness program was applied from early flight system development up through system level environmental testing. The JUNO magnetic cleanliness program required setting-up a specialized magnetic test facility at Lockheed Martin Space Systems for testing the flight system and a testing program with facility for testing system parts and subsystems at JPL. The magnetic modeling, simulation and analysis capability was set up and performed by Aerospace to provide qualitative and quantitative magnetic assessments of the magnetic parts, components, and subsystems prior to or in lieu of magnetic tests. Because of the sensitive nature of the fields and particles scientific measurements being conducted by the JUNO space mission to Jupiter, the imposition of stringent magnetic control specifications required a magnetic control program to ensure that the spacecraft's science magnetometers and plasma wave search coil were not magnetically contaminated by flight system magnetic interferences. With Aerospace's magnetic modeling, simulation and analysis and JPL's system modeling and testing approach, and LMSS's test support, the project achieved a cost effective approach to achieving a magnetically clean spacecraft. This paper presents lessons learned from the JUNO magnetic testing approach and Aerospace's modeling, simulation and analysis activities used to solve problems such as remnant magnetization, performance of hard and soft magnetic materials within the targeted space system in applied external magnetic fields.

magnetics↗
DOE OSTI2018

Additive Manufacturing of Highly Reactive Lanthanides

Additive manufacturing (AM) is a unique type of fabrication that builds objects layer-by-layer from virtually any feedstock. When compared to traditional, subtractive manufacturing, AM wastes less feedstock material, which makes it ideal for the shaping of magnetic materials. Furthermore, complex geometries with advanced heat and mass transport properties can be created out of highly reactive lanthanides which could not be created with traditional manufacturing. This work describes the results of shaping these materials into high-resolution microchannel geometries via additive manufacturing and the resulting characteristics of the printed artifacts.

Elliott, Amy M.↗
DOE OSTI2015

High pressure induced charge transfer in 3d–4f bimetallic photomagnetic materials

In this work, pressure-induced crystal color change of photo-magnetic materials [Ln(DMF) 4 (H 2 O) 3 (μ-CN)M(CN) 5 ]·H 2 O, Ln = Y, M = Fe (1), Ln = Y, M = Co (2), Ln = Nd, M = Fe (3) (DMF = N,N-dimethyl formamide) are investigated using variable pressure X-ray Absorption Near-Edge Structure (XANES) spectroscopy and X-ray diffraction. For 1 the effect is caused by ligand-to-metal charge transfer (LMCT) on the iron site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Charge-magnetic interference resonant scattering studies of ferromagnetic crystals and thin films

The element- and site-specificity of X-ray resonant magnetic scattering (XRMS) makes it an ideal tool for furthering our understanding of complex magnetic systems. In the hard X-rays, XRMS is readily applied to most antiferromagnets where the relatively weak resonant magnetic scattering (10 -2 –10 -6 I c ) is separated in reciprocal space from the stronger, Bragg charge scattered intensity, I c . In ferro(ferri)magnetic materials, however, such separation does not occur and measurements of resonant magnetic scattering in the presence of strong charge scattering are quite challenging. We discuss the use of charge-magnetic interference resonant scattering for studies of ferromagnetic (FM) crystals and layered films. We review the challenges and opportunities afforded by this approach, particularly when using circularly polarized X-rays. Here we illustrate current capabilities at the Advanced Photon Source with studies aimed at probing site-specific magnetism in ferromagnetic crystals, and interfacial magnetism in films.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct Visualization of Magnetic Correlations in Frustrated Spinel ZnFe 2 O 4

Magnetic materials with the spinel structure (A 2+ B 3+ 2 O 4 ) form the core of numerous magnetic devices, and ZnFe 2 O 4 constitutes a peculiar example where the nature of the magnetism is still unresolved. Susceptibility measurements revealed a cusp around T c = 13 K resembling an antiferromagnetic transition, despite the positive Curie–Weiss temperature determined to be Θ CW = 102.8(1) K. Bifurcation of field-cooled and zero-field-cooled data below T c in conjunction with a frequency dependence of the peak position and a non-zero imaginary component below T c shows it is in fact associated with a spin-glass transition. Highly structured magnetic diffuse neutron scattering from single crystals develops between 50 K and 25 K revealing the presence of magnetic disorder which is correlated in nature. Here, the 3D-mΔPDF method is used to visualize the local magnetic ordering preferences, and ferromagnetic nearest-neighbor and antiferromagnetic third nearest-neighbor correlations are shown to be dominant. Their temperature dependence is extraordinary with some flipping in sign and a strongly varying correlation length. The correlations can be explained by orbital interaction mechanisms for the magnetic pathways and a preferred spin cluster. This study demonstrates the power of the 3D-mΔPDF method in visualizing complex quantum phenomena thereby providing a way to obtain an atomic-scale understanding of magnetic frustration.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of defects, magnetocrystalline anisotropy, and shape anisotropy on magnetic structure of iron thin films by magnetic force microscopy

Microstructures of magnetic materials, including defects and crystallographic orientations, are known to strongly influence magnetic domain structures. Measurement techniques such as magnetic force microscopy (MFM) thus allow study of correlations between microstructural and magnetic properties. The present work probes effects of anisotropy and artificial defects on the evolution of domain structure with applied field. Single crystal iron thin films on MgO substrates were milled by Focused Ion Beam (FIB) to create different magnetically isolated squares and rectangles in [110] crystallographic orientations, having their easy axis 45° from the sample edge. To investigate domain wall response on encountering non-magnetic defects, a 150 nm diameter hole was created in the center of some samples. By simultaneously varying crystal orientation and shape, both magnetocrystalline anisotropy and shape anisotropy, as well as their interaction, could be studied. Shape anisotropy was found to be important primarily for the longer edge of rectangular samples, which exaggerated the FIB edge effects and provided nucleation sites for spike domains in non-easy axis oriented samples. Center holes acted as pinning sites for domain walls until large applied magnetic fields. The present studies are aimed at deepening the understanding of the propagation of different types of domain walls in the presence of defects and different crystal orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

3D Heisenberg universality in the van der Waals antiferromagnet NiPS 3

Van der Waals (vdW) magnetic materials are comprised of layers of atomically thin sheets, making them ideal platforms for studying magnetism at the two-dimensional (2D) limit. These materials are at the center of a host of novel types of experiments, however, there are notably few pathways to directly probe their magnetic structure. We confirm the magnetic order within a single crystal of NiPS 3 and show it can be accessed with resonant elastic X-ray diffraction along the edge of the vdW planes in a carefully grown crystal by detecting structurally forbidden resonant magnetic X-ray scattering. We find the magnetic order parameter has a critical exponent of β ~ 0.36, indicating that the magnetism of these vdW crystals is more adequately characterized by the three-dimensional (3D) Heisenberg universality class. We verify these findings with first-principles density functional theory, Monte-Carlo simulations, and density matrix renormalization group calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

3% Silicon Steel Core Material (Grain Oriented Electrical Steel) (Rev.01)

3% (Grain-Oriented) Silicon Steel is a soft magnetic material that is best used in electrical power transformers and inductors. It has a silicon content up to 3.2 mass %, which increases the electrical resistivity and reduces eddy current losses. The magnetic properties can be enhanced during a cold rolling stage (along the length) to produce textured sheets, known as grain-oriented electrical steel. Due to its preferred crystallographic orientation, it is used primarily for non-rotating applications, i.e. transformers and inductors. Typical operating frequency of 3% Silicon Steel is 50-60 Hz (hertz). A variety of forms can be manufactured, including lamination, toroidal and C-cores, as well as glued block cores of various shapes by cutting or pressing.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Magnetic core/shell-type composites composed of coarse FePt particles coated with finely powdered iron nitride

Highlights: • Magnetic core/shell-type composites were prepared on α″-Fe{sub 16}N{sub 2}-like compound with FePt core. • α″-Fe{sub 16}N{sub 2}-like compound grew epitaxially on the FePt core. • Magnetic coupling increased the magnetic coercivity of α″-Fe{sub 16}N{sub 2}-like compound. - Abstract: Although α″-Fe{sub 16}N{sub 2}-like compounds exhibit enhanced magnetization compared to α-Fe, it is important to increase their magnetic coercivity to obtain new hard magnetic materials for electric vehicle application. In the present work, coarse FePt particles were coated with finely powdered Fe{sub 3}O{sub 4} produced by the hydrolysis of Fe(acac){sub 3} in benzyl alcohol. This Fe{sub 3}O{sub 4} coating layer was subsequently reduced under hydrogen and then nitrided by ammonolysis at 150 °C to obtain a dual-phase mixture of an α″-Fe{sub 16}N{sub 2}-like compound (referred to herein as “α″-Fe{sub 16}N{sub 2}”) and residual α-Fe. The (“α″-Fe{sub 16}N{sub 2}” + α-Fe){sub 1-x}/(FePt){sub x} composite particles for which x = 0.2, 0.4 or 0.6 generated smooth magnetization hysteresis curves, and the magnetic coercivity of these materials increased with increases in the proportion of FePt. Magnetic coupling was clearly evident between the core and shell regions in the composite powder for which x = 0.6, as demonstrated by a plot of the Wohlfarth interaction against the magnetic field. Transmission electron microscopy images confirmed magnetic coupling between the coarse FePt particles (several hundred nm in diameter) and the coating of fine mixed particles (several tens of nm in diameter) of “α″-Fe{sub 16}N{sub 2}” and α-Fe. The “α″-Fe{sub 16}N{sub 2}” crystals forming the particle shell were found to grow epitaxially, aligning their c-axes parallel to that of the tetragonal FePt.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Optimizing composition in MnBi permanent magnet alloys

MnBi is an attractive rare-earth-free permanent magnetic material due to its low materials cost, high magnetocrystalline anisotropy (1.6 × 10 6 J m -3 ), and good magnetization (81 emu g -1 ) at room temperature. Although the theoretical maximum energy product (BH) max of 20 MGOe is lower than that of NdFeB-based magnets, the low temperature phase (LTP) of MnBi has a positive temperature coefficient of coercivity, up to 200 °C, which makes it a potential candidate for high temperature applications such as permanent magnet motors. However, the oxygen sensitivity of the MnBi compound and the peritectic reaction between Mn and Bi make it difficult to synthesize into a material with high purity. This challenge is partly offset by adding excess Mn to the alloy, with composition close to Mn 55 Bi 45 resulting in the highest saturation magnetization after common processing techniques such as arc melting, casting, melt spinning, and ball milling. In this paper, we report a systematic process which reduces the amount of excessive Mn, while simultaneously providing a large saturation magnetization (M S ) of 79 emu g -1 at 300 K in the annealed Mn 52 Bi 48 ribbons. We also report excellent magnetic properties in the ball powders, resulting in 0.5–5 µm particles with M S of 75.5 emu g -1 , coercivity H ci of 10.8 kOe, and (BH) max of 13 MGOe using 9 T applied field at 300 K. A secondary annealing treatment on various ball milled powders increased H ci by up to 21%, and also resulted in an increase in M S up to 78.8 emu g -1 .

36 MATERIALS SCIENCE↗
DOE OSTI2015

Coherent pulse interrogation system for fiber Bragg grating sensing of strain and pressure in dynamic extremes of materials

A 100 MHz fiber Bragg grating (FBG) interrogation system is described and applied to strain and pressure sensing. The approach relies on coherent pulse illumination of the FBG sensor with a broadband short pulse from a femtosecond modelocked erbium fiber laser. After interrogation of the FBG sensor, a long multi-kilometer run of single mode fiber is used for chromatic dispersion to temporally stretch the spectral components of the reflected pulse from the FBG sensor. Dynamic strain or pressure induced spectral shifts in the FBG sensor are detected as a pulsed time domain waveform shift after encoding by the chromatic dispersive line. Signals are recorded using a single 35 GHz photodetector and a 50 G Samples per second, 25 GHz bandwidth, digitizing oscilloscope. Application of this approach to high-speed strain sensing in magnetic materials in pulsed magnetic fields to ~150 T is demonstrated. The FBG wavelength shifts are used to study magnetic field driven magnetostriction effects in LaCoO₃. A sub-microsecond temporal shift in the FBG sensor wavelength attached to the sample under first order phase change appears as a fractional length change (strain: ΔL/L<10⁻⁴) in the material. A second application used FBG sensing of pressure dynamics to nearly 2 GPa in the thermal ignition of the high explosive PBX-9501 is also demonstrated. Both applications demonstrate the use of this FBG interrogation system in dynamical extreme conditions that would otherwise not be possible using traditional FBG interrogation approaches that are deemed too slow to resolve such events.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Error controlling of the combined Cluster-Expansion and Wang–Landau Monte-Carlo method and its application to FeCo

Simulating order–disorder phase transitions in magnetic materials requires the accurate treatment of both the atomic and magnetic interactions, which span a vast configuration space. Taking FeCo as a prototype system, we demonstrate that this can be accurately and efficiently addressed by the combined Cluster-Expansion method and Wang–Landau algorithm. All involved key parameters in this method are carefully tested. Based on these tests, error controlling approaches are also developed. Furthermore our method is readily applicable to the study of similar second-order phase transitions in other binary and multi-component systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Topology optimization of permanent magnets for stellarators

In this work, we introduce a topology optimization method to design permanent magnets for advanced stellarators. Recent researches show that permanent magnets have great potentials to simplify stellarator coils. We adopt state-of-the-art numerical techniques to determine the presence of magnets in the entire designing space. The FAMUS code is developed and it can design engineering-feasible permanent magnets for general stellarators satisfying the constraints of the maximum material magnetization and explicit forbidden regions. FAMUS has been successfully verified against the previously proposed linear method. Three different permanent magnet designs together with planar TF coils for a half-Tesla NCSX configuration have been obtained for demonstrations. The designs have good accuracy in generating the desired equilibrium and offer considerably large plasma access on the outboard side. The results show that FAMUS is a flexible, advanced numerical tool for future permanent magnet stellarator designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Investigation of superconducting interactions and amorphous semiconductors

Research papers on superconducting interactions and properties and on amorphous materials are presented. The search for new superconductors with improved properties was largely concentrated on the study of properties of thin films. An experimental investigation of interaction mechanisms revealed no new superconductivity mechanism. The properties of high transition temperature, type 2 materials prepared in thin film form were studied. A pulsed field solenoid capable of providing fields in excess of 300 k0e was developed. Preliminary X-ray measurements were made of V3Si to determine the behavior of cell constant deformation versus pressure up to 98 kilobars. The electrical properties of amorphous semiconducting materials and bulk and thin film devices, and of amorphous magnetic materials were investigated for developing radiation hard, inexpensive switches and memory elements.

Janocko, M. A.↗
NASA NTRS1976

Zero-G processing of magnets experiment MA-070

Solidification of magnetic materials in the low gravity orbital environment was studied. The magnetic compounds under study, manganese bismuth and copper cobalt cerium ((Cu, Co)5Ce), both have the potential for the development of high coercive strength. Preliminary results indicate that static fluid configurations, in the absence of the gravitational body force, differ substantially from the documented terrestrial behavior. Chemical homogeneity is substantially enhanced on a macroscopic and microscopic level. Single crystal matrices have been grown in the coordinated growth regions of the flight samples. Primary crystals one order of magnitude greater than those grown terrestrially have been noted and are limited in size by the ampoule dimensions.

Larson, D. J., Jr.↗
NASA NTRS1977

Design of single-winding energy-storage reactors for dc-to-dc converters using air-gapped magnetic-core structures

A procedure is presented for designing air-gapped energy-storage reactors for nine different dc-to-dc converters resulting from combinations of three single-winding power stages for voltage stepup, current stepup and voltage stepup/current stepup and three controllers with control laws that impose constant-frequency, constant transistor on-time and constant transistor off-time operation. The analysis, based on the energy-transfer requirement of the reactor, leads to a simple relationship for the required minimum volume of the air gap. Determination of this minimum air gap volume then permits the selection of either an air gap or a cross-sectional core area. Having picked one parameter, the minimum value of the other immediately leads to selection of the physical magnetic structure. Other analytically derived equations are used to obtain values for the required turns, the inductance, and the maximum rms winding current. The design procedure is applicable to a wide range of magnetic material characteristics and physical configurations for the air-gapped magnetic structure.

Ohri, A. K.↗