Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A strong ferroelectric ferromagnet created by means of spin-lattice coupling.

Ferroelectric ferromagnets are exceedingly rare, fundamentally interesting multiferroic materials that could give rise to new technologies in which the low power and high speed of field-effect electronics are combined with the permanence and routability of voltage-controlled ferromagnetism. Furthermore, the properties of the few compounds that simultaneously exhibit these phenomena are insignificant in comparison with those of useful ferroelectrics or ferromagnets: their spontaneous polarizations or magnetizations are smaller by a factor of 1,000 or more. The same holds for magnetic- or electric-field-induced multiferroics. Owing to the weak properties of single-phase multiferroics, composite and multilayer approaches involving strain-coupled piezoelectric and magnetostrictive components are the closest to application today. Recently, however, a new route to ferroelectric ferromagnets was proposed by which magnetically ordered insulators that are neither ferroelectric nor ferromagnetic are transformed into ferroelectric ferromagnets using a single control parameter, strain. The system targeted, EuTiO{sub 3}, was predicted to exhibit strong ferromagnetism (spontaneous magnetization, {approx}7 Bohr magnetons per Eu) and strong ferroelectricity (spontaneous polarization, {approx}10 {micro}C cm{sup -2}) simultaneously under large biaxial compressive strain. These values are orders of magnitude higher than those of any known ferroelectric ferromagnet and rival the best materials that are solely ferroelectric or ferromagnetic. Hindered by the absence of an appropriate substrate to provide the desired compression we turned to tensile strain. Here we show both experimentally and theoretically the emergence of a multiferroic state under biaxial tension with the unexpected benefit that even lower strains are required, thereby allowing thicker high-quality crystalline films. This realization of a strong ferromagnetic ferroelectric points the way to high-temperature manifestations of this spin-lattice coupling mechanism. Our work demonstrates that a single experimental parameter, strain, simultaneously controls multiple order parameters and is a viable alternative tuning parameter to composition for creating multiferroics.

36 MATERIALS SCIENCE↗

Electrical and optical characterizations of spin-orbit torque

To further reduce the energy consumption in spin–orbit torque devices, it is crucial to precisely quantify the spin–orbit torque (SOT) in different materials and structures. In this work, heavy metal/ferromagnet and heavy metal/ferrimagnet heterostructures are employed as the model systems to compare the electrical and optical methods for the SOT characterization, which are based on the anomalous Hall effect and the magneto-optical Kerr effect, respectively. It is found that both methods yield the consistent SOT strength for the current-driven magnetization switching measurements and the harmonic measurements. Our results suggest that the optical method is a feasible and reliable tool to investigate SOT, which is a powerful way to develop insulator-based magnetic systems in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase transition preceding magnetic long-range order in the double perovskite Ba 2 NaOsO 6

Recent theoretical studies [G. Chen et al., Phys. Rev. B 82, 174440 (2010); H. Ishizuka et al., Phys. Rev. B 90, 184422 (2014)] for the magnetic Mott insulator Ba 2 NaOsO 6 have proposed a low-temperature order parameter that breaks lattice rotational symmetry without breaking time reversal symmetry, leading to a nematic phase just above the magnetic ordering temperature. We present high-resolution calorimetric and magnetization data of the same Ba 2 NaOsO 6 single crystal and show evidence for a weakly field-dependent phase transition occurring at a temperature of T s ≈ 9.5K, above the magnetic ordering temperature of T c ≈ 7.5K. This transition appears as a broadened step in the low-field temperature dependence of the specific heat. The evolution of the phase boundary with applied magnetic field suggests that this phase coincides with the phase of broken local point symmetry seen in NMR experiments at high fields [L. Lu et al., Nat. Commun. 8, 14407 (2017)]. Here, the magnetic field dependence of the specific heat provides clear indications for magnetic correlations persisting at temperatures between T c and T s where long-range magnetic order is absent, giving support for the existence of the proposed nematic phase.

36 MATERIALS SCIENCE↗

The exceedingly strong two-dimensional ferromagnetism in bi-atomic layer SrRuO 3 with a critical conduction transition

In recent years, few-layer or even monolayer ferromagnetic materials have drawn a great deal of attention due to the promising integration of two-dimensional (2D) magnets into next-generation spintronic devices. The SrRuO 3 monolayer is a rare example of stable 2D magnetism under ambient conditions, but only weak ferromagnetism or antiferromagnetism has been found. The bi-atomic layer SrRuO3 as another environmentally inert 2D magnetic system has been paid less attention heretofore. Here we study both the bi-atomic layer and monolayer SrRuO 3 in (SrRuO 3 ) n /(SrTiO 3 ) m (n = 1, 2) superlattices in which the SrTiO 3 serves as a non-magnetic and insulating space layer. Although the monolayer exhibits arguably weak ferromagnetism, we find that the bi-atomic layer exhibits exceedingly strong ferromagnetism with a T c of 125 K and a saturation magnetization of 1.2 μ B /Ru, demonstrated by both superconducting quantum interference device (SQUID) magnetometry and element-specific X-ray circular dichroism. Moreover, in the bi-atomic layer SrRuO 3 , we demonstrate that random fluctuations and orbital reconstructions inevitably occurring in the 2D limit are critical to the electrical transport, but are much less critical to the ferromagnetism. Our study demonstrates that the bi-atomic layer SrRuO 3 is an exceedingly strong 2D ferromagnetic oxide which has great potentials for applications of ultracompact spintronic devices.

36 MATERIALS SCIENCE↗

Unusual dynamic susceptibility arising from soft ferromagnetic domains in MnBi 8 Te 13 and Sb-doped MnBi 2n Te 3n+1 (n = 2, 3)

MnBi$_{2n}$Te$_{3n+1}$ (MBT) is the first intrinsic magnetic topological insulator and is promising to host emergent phenomena such as quantum anomalous Hall effect. They can be made ferromagnetic by having n ≥ 4 or with Sb doping. In this work, we studied the magnetic dynamics in a few selected ferromagnetic (FM) MBT compounds, including MnBi 8 Te 13 and Sb doped MnBi$_{2n}$Te$_{3n+1}$ ($n = 2, 3)$ using AC susceptibility and magneto-optical imaging. Slow relaxation behavior is observed in all three compounds, suggesting its universality among FM MBT. We attribute the origin of the relaxation behavior to the irreversible domain movements since they only appear below the saturation fields when ferromagnetic domains form. The very soft ferromagnetic domain nature is revealed by the low-field fine-structured domains and high-field sea-urchin-shaped remanent-state domains imaged via our magneto-optical measurements. Finally, we ascribe the rare 'double-peak' behavior observed in the AC susceptibility under small DC bias fields to the very soft ferromagnetic domain formations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin-based detection of terahertz and sub-terahertz electromagnetic radiation

Systems and methods for spin-based detection of electromagnetic radiation at terahertz and sub-terahertz frequencies is provided. The detector can include a heterostructure, a magnetic field generator, and an electrical circuit. The heterostructure can include a first layer formed of an antiferromagnetic material (AFM) in contact with a second layer of a heavy metal (HM) or a topological insulator. The magnetic field generator can generate a magnetic field oriented approximately parallel to an easy axis of the first layer and approximately parallel to a propagation direction of electromagnetic radiation. The circuit can be in electrical communication with the second layer. The first layer can inject a spin current into the second layer in response to receipt of electromagnetic radiation having a sub-terahertz or terahertz frequency. The second layer can convert the injected spin current into a potential difference. The circuit can be configured to output a signal corresponding to the potential difference.

Shi, Jing↗

Superconductivity by alloying the topological insulator SnBi 2 Te 4

Alloying indium into the topological insulator SnBi 2 Te 4 induces bulk superconductivity with critical temperatures T c up to 1.85 K and upper critical fields up to about 14 kOe. This is confirmed by electrical resistivity, heat capacity, and magnetic susceptibility measurements. The heat capacity shows a discontinuity at T c and temperature dependence below T c consistent with weak coupling BCS theory, and suggests a superconducting gap near 0.25 meV. The superconductivity is type-II and the topological surface states have been verified by photoemission. Here, a simple picture suggests analogies with the isostructural magnetic topological insulator MnBi 2 Te 4 , in which a natural heterostructure hosts complementary properties on different sublattices, and motivates new interest in this large family of compounds. The existence of both topological surface states and superconductivity in Sn 1-x In x Bi 2 Te 4 identifies these materials as promising candidates for the study of topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging Dirac-mass disorder from magnetic dopant atoms in the ferromagnetic topological insulator Cr x (Bi 0.1 Sb 0.9 ) 2-x Te 3

To achieve and use the most exotic electronic phenomena predicted for the surface states of 3D topological insulators (TIs), it is necessary to open a “Dirac-mass gap” in their spectrum by breaking time-reversal symmetry. Use of magnetic dopant atoms to generate a ferromagnetic state is the most widely applied approach. However, it is unknown how the spatial arrangements of the magnetic dopant atoms influence the Dirac-mass gap at the atomic scale or, conversely, whether the ferromagnetic interactions between dopant atoms are influenced by the topological surface states. Here we image the locations of the magnetic (Cr) dopant atoms in the ferromagnetic TI Cr₀.₀₈(Bi₀.₁Sb₀.₉)₁.₉₂Te₃. Simultaneous visualization of the Dirac-mass gap Δ(r) reveals its intense disorder, which we demonstrate is directly related to fluctuations in n(r), the Cr atom areal density in the termination layer. We find the relationship of surface-state Fermi wavevectors to the anisotropic structure of Δ(r) not inconsistent with predictions for surface ferromagnetism mediated by those states. Moreover, despite the intense Dirac-mass disorder, the anticipated relationship Δ(r)∝n(r) is confirmed throughout and exhibits an electron–dopant interaction energy J* = 145 meV·nm². In addition, these observations reveal how magnetic dopant atoms actually generate the TI mass gap locally and that, to achieve the novel physics expected of time-reversal symmetry breaking TI materials, control of the resulting Dirac-mass gap disorder will be essential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elucidating the Role of Dimensionality on the Electronic Structure of the Van der Waals Antiferromagnet NiPS 3

Abstract The sustained interest in investigating magnetism in the 2D limit of insulating antiferromagnets is driven by the possibilities of discovering, or engineering, novel magnetic phases through layer stacking. However, due to the difficulty of directly measuring magnetic interactions in 2D antiferromagnets, it is not yet understood how intra layer magnetic interactions in insulating , strongly correlated, materials can be modified through layer proximity. Herein, the impact of reduced dimensionality in the model van der Waals antiferromagnet NiPS 3 is explored by measuring electronic excitations in exfoliated samples using Resonant Inelastic X‐ray Scattering (RIXS). The resulting spectra shows systematic broadening of NiS 6 multiplet excitations with decreasing layer count from bulk down to three atomic layers (3L). It is shown that these trends originate from a decrease in transition metal‐ligand and ligand–ligand hopping integrals, and by charge‐transfer energy evolving from Δ = 0.83 eV in the bulk to 0.37 eV in 3L NiPS 3 . Relevant intralayer magnetic exchange integrals computed from the electronic parameters exhibit a decrease in the average interaction strength with thickness. This study underscores the influence of inter layer electronic interactions on intra layer ones in insulating magnets, indicating that magnetic Hamiltonians in few‐layer insulating magnets can greatly deviate from their bulk counterparts.

36 MATERIALS SCIENCE↗

High‐Efficiency Magnon‐Mediated Magnetization Switching in All‐Oxide Heterostructures with Perpendicular Magnetic Anisotropy

Abstract The search for efficient approaches to realize local switching of magnetic moments in spintronic devices has attracted extensive attention. One of the most promising approaches is the electrical manipulation of magnetization through electron‐mediated spin torque. However, the Joule heat generated via electron motion unavoidably causes substantial energy dissipation and potential damage to spintronic devices. Here, all‐oxide heterostructures of SrRuO 3 /NiO/SrIrO 3 are epitaxially grown on SrTiO 3 single‐crystal substrates following the order of the ferromagnetic transition metal oxide SrRuO 3 with perpendicular magnetic anisotropy, insulating and antiferromagnetic NiO, and metallic transition metal oxide SrIrO 3 with strong spin–orbit coupling. It is demonstrated that instead of the electron spin torques, the magnon torques present in the antiferromagnetic NiO layer can directly manipulate the perpendicular magnetization of the ferromagnetic layer. This magnon mechanism may significantly reduce the electron motion‐related energy dissipation from electron‐mediated spin currents. Interestingly, the threshold current density to generate a sufficient magnon current to manipulate the magnetization is one order of magnitude smaller than that in conventional metallic systems. These findings suggest a route for developing highly efficient all‐oxide spintronic devices operated by magnon current.

Zheng, Dongxing↗

Modulating Oxide‐Based Quantum Materials by Ion Implantation

Ion implantation has emerged as a powerful tool for manipulating and investigating oxide quantum materials, where strong electron correlations give rise to exotic phases and functionalities. This Review examines how controlled ion bombardment enables targeted modulation of structural, electronic, and magnetic properties in complex oxides. Recent advances in ion beam techniques is analyzed that provide unprecedented control over defect profiles, from point defects to extended damage cascades. In application, ion irradiation has demonstrated the ability to tune quantum phenomena including metal‐insulator transitions, magnetism, and superconductivity through selective doping, defect creation, and lattice strain. The ability to write quantum states with nanoscale precision using focused ion beams is opening new paths for quantum device fabrication. Challenges in understanding radiation damage mechanisms in strongly correlated systems is discussed, and identify opportunities for designing quantum functionality through defect‐engineering approaches. The technique's demonstrated capability to write quantum states with nanoscale precision, combined with its compatibility with existing semiconductor processing infrastructure, suggests a clear pathway for translating fundamental discoveries in quantum materials into practical technological applications.

defect engineering↗

Band inversion-driven warping and high valley degeneracy

Band inversion is a physical phenomenon that can warp the band structure in topological insulators, generating multiple electronic valleys for conducting carriers. However, the conditions under which band inversion induces warping are not well understood. Here, we derive two general rules that must be satisfied for band warping to occur in centrosymmetric and non-magnetic topological insulators: (1) bands must be sufficiently inverted, and (2) secondary bands must have opposite parity and be close in energy to the band edges. We chart the valley degeneracies that can emerge from band inversion in each of the 11 centrosymmetric point groups, revealing that an increase in the valley degeneracy between 2- and 48-fold is possible from band inversion. The generalized rules offer a unique band engineering approach by capitalizing on the non-trivial electronic structures of topological insulators.

36 MATERIALS SCIENCE↗

High Thermal Conductivity Resin Systems for High Energy Physics Magnets

In Nb3Sn superconducting magnets, the cable and insulation system dominate the behavior of a completed magnet, with contributions to the mechanical behavior from the stiff, brittle components of the superconductor, the soft annealed copper stabilizer, and the properties of the composite insulation system. As these components are closely integrated on a small scale, it is of value to explore the properties of the entire system at a larger scale, to enable practical magnet design. Subscale composite testing (Stack Testing) has been used extensively to study the bulk material properties of the magnet composite structure. Small samples that mimic the fabrication process of magnets are fabricated and tested to qualify and characterize magnet insulation systems for use in future magnet projects as well as to better inform magnet designers about means for assembly and general handling processes. Subscale composite samples will be fabricated and characterized using various novel resins to work to improve magnet performance. New resin systems will be screened to allow for down selection to one or more highly promising resin systems. The work performed under this agreement at Fermilab will feed via CTD into the fabrication of subscale magnets at Lawrence Berkeley National Laboratory (LBNL) for verification of magnet performance.

43 PARTICLE ACCELERATORS↗

Coexistence of Surface Ferromagnetism and a Gapless Topological State in MnBi 2 Te 4

Surface magnetism and its correlation with the electronic structure are critical to understanding the topological surface state in the intrinsic magnetic topological insulator MnBi 2 Te 4 . Here, using static and time resolved angle-resolved photoemission spectroscopy (ARPES), we find a significant ARPES intensity change together with a gap opening on a Rashba-like conduction band. Comparison with a model simulation strongly indicates that the surface magnetism on cleaved MnBi 2 Te 4 is the same as its bulk state. Finally, the inability of surface ferromagnetism to open a gap in the topological surface state uncovers the novel complexity of MnBi 2 Te 4 that may be responsible for the low quantum anomalous Hall temperature of exfoliated MnBi 2 Te 4 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Doped Mott insulators in the triangular-lattice Hubbard model

Here we investigate the evolution of the Mott insulators in the triangular lattice Hubbard Model, as a function of hole doping δ in both the strong and intermediate coupling limits. Using the advanced density matrix renormalization group (DMRG) method, at light hole doping δ ≲ 10%, we find a significant difference between strong and intermediate couplings. Notably, at intermediate coupling an unusual metallic state emerges, with short ranged spin correlations but long ranged spin-chirality order. Moreover, no clear Fermi surface or wave vector is observed, this chiral metal also exhibits staggered loop current, which breaks the translational symmetry. These features disappear on increasing interaction strength or on further doping. At strong coupling, the 120 degree magnetic order of the insulating magnet persists for light doping, and produces hole pockets with a well-defined Fermi surface. On further doping, δ ≈ 10%~20% SDW order and coherent hole Fermi pockets are found at both strong and intermediate couplings. At even higher doping δ ≳ 20%, the SDW order is suppressed and the spin-singlet Cooper pair correlations are simultaneously enhanced. We also briefly comment on the strong particle-hole asymmetry of the model.

36 MATERIALS SCIENCE↗

Alloying vanadium in Mn Bi 2 Te 4 for robust ferromagnetic coupling and quantum anomalous Hall effect

The intrinsic antiferromagnetic (AFM) interlayer coupling in the two-dimensional magnetic topological insulator MnBi 2 Te 4 places a restriction on realizing a stable quantum anomalous Hall effect (QAHE) [Y. Deng et al., Science 367, 895 (2020)]. Through density functional theory calculations, we demonstrate the possibility of tuning the AFM coupling to the ferromagnetic coupling in Mn Bi 2 Te 4 films by alloying about 50% V with Mn. As a result, the QAHE can be achieved without alternation with the even or odd septuple layers. This provides a practical strategy to get a robust QAHE in ultrathin Mn Bi 2 Te 4 films, rendering them attractive for technological innovations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallinity of tellurium capping and epitaxy of ferromagnetic topological insulator films on SrTiO 3

Thin films of topological insulators are often capped with an insulating layer since topological insulators are known to be fragile to degradation. However, capping can hinder the observation of novel transport properties of the surface states. To understand the influence of capping on the surface states, it is crucial to understand the crystal structure and the atomic arrangement at the interfaces. Here, we use x-ray diffraction to establish the crystal structure of magnetic topological insulator Cr-doped (Bi,Sb) 2 Te 3 (CBST) films grown on SrTiO 3 (1 1 1) substrates with and without a Te capping layer. We find that both the film and capping layer are single crystal and that the crystal quality of the film is independent of the presence of the capping layer, but that x-rays cause sublimation of the CBST film, which is prevented by the capping layer. Our findings show that the different transport properties of capped films cannot be attributed to a lower crystal quality but to a more subtle effect such as a different electronic structure at the interface with the capping layer. Our results on the crystal structure and atomic arrangements of the topological heterostructure will enable modelling the electronic structure and design of topological heterostructures.

33 ADVANCED PROPULSION SYSTEMS↗

Perspective–The Elusive Quantum Anomalous Hall Effect in MnBi 2 Te 4 : Materials

Observation of the quantum anomalous Hall effect (QAHE) in MnBi 2 Te 4 flakes is one of the most exciting results in the study of the intrinsic magnetic topological insulator MnBi 2 Te 4 and related compounds. However, reproducing this fascinating result has been found to be challenging. The quality of starting MnBi 2 Te 4 single crystals is believed to be the key factor. An interesting and important question to address is what is the right quality to enable the QAHE. In this perspective, we present possible approaches to tuning the magnetic and topological properties of MnBi 2 Te 4 by using lattice imperfections, strain, stacking sequence, and interactions between the substrate and flakes/films. It is of critical importance to eventually identify the factor(s) responsible for the realization of QAHE. This paper is part of the JES/JSS Joint Focus Issue In Honor of John Goodenough: A Centenarian Milestone.

36 MATERIALS SCIENCE↗