Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Thrust”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Space propulsion technology overview

This paper discusses Shuttle-era, chemical and electric propulsion technologies for operations beyond the Shuttle's orbit with focus on future mission needs and economic effectiveness. The adequacy of the existing propulsion state-of-the-art, barriers to its utilization, benefit of technology advances, and the prognosis for advancement are the themes of the discussion. Low-thrust propulsion for large space systems is cited as a new technology with particularly high benefit. It is concluded that the Shuttle's presence for at least two decades is a legitimate basis for new propulsion technology, but that this technology must be predicated on an awareness of mission requirements, economic factors, influences of other technologies, and real constraints on its utilization.

Pelouch, J. J., Jr.↗
NASA NTRS1979

Orbital Transfer Vehicle (OTV) engine study. Phase A: Extension

An orbital transfer vehicle OTV engine study program was undertaken to provide additional expander and staged combustion cycle data in the design definition of the OTV engine. The proposed program effort optimizes the expander cycle engine concept (consistent with identified OTV engine requirements), investigates the feasibility of kitting the staged combustion cycle engine to provide extended low thrust operation, and conducts in-depth analysis of development risk, crew safety, and reliability for both cycles. Additional tasks to establish the cost of a 10K thrust expander cycle engine and to render support of OTV systems study contractors are reported.

Sobin, A. J.↗
NASA NTRS1980

Orbital refill of propulsion vehicle tankage

Techniques for orbital refueling of space based vehicles were developed and experimental programs to verify these techniques were identified. Orbital refueling operations were developed for two cryogenic orbital transfer vehicles (OTV's) and an Earth storable low thrust liquid propellant vehicle. Refueling operations were performed assuming an orbiter tanker for near term missions and an orbital depot. Analyses were conducted using liquid hydrogen and N2O4. The influence of a pressurization system and acquisition device on operations was also considered. Analyses showed that vehicle refill operations will be more difficult with a cryogen than with an earth storable. The major elements of a successful refill with cryogens include tank prechill and fill. Propellant quantities expended for tank prechill appear to to insignificant. Techniques were identified to avoid loss of liquid or excessive tank pressures during refill. It was determined that refill operations will be similar whether or not an orbiter tanker or orbital depot is available. Modeling analyses were performed for prechill and fill tests to be conducted assuming the Spacelab as a test bed, and a 1/10 scale model OTV (with LN2 as a test fluid) as an experimental package.

Merino, F.↗
NASA NTRS1980

Orbital Transfer Vehicle (OTV) engine study phase A, extension

The current Phase A-Extension of the OTV engine study program seeks to provide additional expander and staged combustion cycle data that will lead to design definition of the OTV engine. The proposed program effort will optimize the expander cycle engine concept (consistent with identified OTV engine requirements), investigate the feasibility of kitting the stage combustion cycle engine to provide extended low thrust operation, and conduct in-depth analysis of development risk, crew safety, and reliability for both cycles. Additional task will address costing of a 10k thrust expander cycle engine and support of OTV systems study contractors.

Sobin, A. J.↗
NASA NTRS1980

Introduction: The challenge of optimum integration of propulsion systems and large space structures

A functional matrix of possible propulsion system characteristics for a spacecraft for deployable and assembled spacecraft structures shows that either electric propulsion or low thrust chemical propulsion systems could provide the propulsion required. The trade-off considerations of a single propulsion engine or multiengines are outlined and it is shown that a single point engine is bounded by some upper limit of thrust for assembled spacecraft. The matrix also shows several additional functions that can be provided to the spacecraft if a propulsion system is an integral part of the spacecraft. A review of all of the functions that can be provided for a spacecraft by an integral propulsion system may result in the inclusion of the propulsion for several functions even if no single function were mandatory. Propulsion interface issues for each combination of engines are identified.

Carlisle, R. F.↗
NASA NTRS1980

Uranus mission options

Options for delivery of Uranus payloads are covered extensively. Launch energy charts are supplied for ballistic trajectories to Uranus for direct, Jupiter gravity-assist, and Saturn gravity-assist missions launching from 1982 to 1995. Both early reconnaissance (flyby) and orbiter missions are considered. Performance charts for low-thrust, Delta Vega, planetary gravity-assist, and combinations of these modes are plotted in terms of net orbited mass and trip time to Uranus. Discussion and illustration of the effects of the unique Uranus system oritentation on Uranus encounter geometry with trajectory arrival date is covered. Example mission designs are characterized for several delivery modes.

Wallace, R. A.↗
NASA NTRS1980

Large space structures - Fantasies and facts

A review of large space structures activities from 1973 to 1979 is presented. Long-range studies of space colonies, gigantic solar power stations and projected earth applications revived interest in space activities. Studies suggest opportunities for advanced antenna and platform applications. Matching low-thrust propulsion to large flexible vehicles will be a key technology. Current structures technology investigations include deployable and erectable structures and assembly techniques. Based on orbited structures experience, deployment reliability is a critical issue for deployable structures. For erectable structures, concepts for earth-fabricated and space-fabricated memb

Card, M. F.↗
NASA NTRS1980

Planetary spacecraft - SEPS interface design

The interactions between a spacecraft which would rendezvous with the comet Tempel II, the stage, and the mission design are summarized along with solar electric propulsion system design issues. Attention is given to data communication, the spacecraft pointing control system, spacecraft power, plasma interactions, the release of a probe to study the comet Halley, and thruster usage. It was concluded that for a planetary mission design using a low-thrust stage, the control of the mission should reside in the payload spacecraft and that the power should be provided by the stage; the NASA standard 28 VDC bus is recommended.

Pless, L. C.↗
NASA NTRS1980

Solar electric propulsion - A versatile stage for earth orbiting missions

The paper examines recent developments in solar array and ion propulsion systems which make possible the utilization of readily available solar energy for spacecraft propulsion and operation. The Solar Electric Propulsion System (SEPS) stage represents a substantial increase in capability to perform interplanetary and earth orbiting missions due to the combination of high performance and low thrust. SEPS is an important augmentation to the Space Transportation System (STS) for numerous earth orbit missions because it can deliver a greatly increased total satellite mass to a geosynchronous orbit or greatly increase the on-orbit delta V capability.

Smith, D. D.↗
NASA NTRS1981

Orbit Transfer Vehicle (OTV) engine study, phase "A" extension 2

The operation of the Advanced Expander Cycle OTV engine was evaluated at high mixture ratios, and intermediate and low thrust levels to establish the impact upon the engine design and costs, and/or operating characteristics. The engine operation was analyzed at tank head and pumped idle conditions with the nozzle extension retracted. The engine performance, weight, and envelope parametrics data were expanded to include mixture ratios of 7.5 and 8.0.

Christensen, K. L.↗
NASA NTRS1979

Orbit Transfer Vehicle Engine Study. Phase A, extension 1: Study plan update

The updated study plan for the Space Transportation System orbit transfer vehicle (OTV) engine study is presented. The study program consists of engine system, programmatic, cost, and risk analyses of OTV engine concepts. Detailed task descriptions for the advanced expander cycle engine optimization, alternate low thrust capability, and safety, reliability, and cost comparisons are given.

Mellish, J. A.↗
NASA NTRS1981

Comparative cost assessment of planetary missions

A study to explore the cost differences resulting from implementing a series of representative solar system exploration missions in either ballistic or low-thrust flight modes is presented. Cost comparisons of missions using a solar electric propulsion delivery systems with ballistic equivalent mission designs were made. The mission set, cost elements, and delivery modes are detailed. Objectives for each of the six mission sets including two asteroid missions, a comet mission, a Mercury mission, and two outer planet missions are given.

Source record↗
NASA NTRS1982

Structures-propulsion interactions and requirements

The effects of low-thrust primary propulsion system characteristics on the mass, area, and orbit transfer characteristics of large space systems (LSS) were determined. Three general structural classes of LSS were considered, each with a broad range of diameters and nonstructural surface densities. While transferring the deployed structure from LEO and to GEO, an acceleration range of 0.02 to 0.1 g's was found to maximize deliverable payload based on structural mass impact. After propulsion system parametric analyses considering four propellant combinations produced values for available payload mass, length and volume, a thrust level range which maximizes deliverable LSS diameter was determined corresponding to a structure and propulsion vehicle. The engine start and/or shutdown thrust transients on the last orbit transfer (apogee) burn can impose transient loads which would be greater than the steady-state loads at the burnout acceleration. The effect of the engine thrust transients on the LSS was determined from the dynamic models upon which various engine ramps were imposed.

Coyner, J. V.↗
NASA NTRS1982

Propulsion system options for low-acceleration orbit transfer

The present inventory of developed bipropellant engines suitable for the orbit transfer of large space structures is based on the use of storable propellants (nitrogen tetroxide/monomethyl hydrazine). A range of engine sizes from 22N (5 lbF) to over 26,690N (6000 lbF) is available. These engines are capable of delivering specific impulse values from 2795 to 3089 N-s/kg (285 to 315 lbF-sec/lbm). A comparison is made between the attainable specific impulse of these demonstrated engines and future low-thrust engine designs which can utilize LOX/RP-1, LOX-methane, and LOX/hydrogen propellants. The requirements for cooling these small engines for multi-hour burns as well as the merits of operating at nonoptimum performance mixture ratios to improve cooling margins and reduce tank volumes are addressed in this paper.

Schoenman, L.↗
NASA NTRS1982

The Centaur family

The Centaur upper stage has been used with Atlas and Titan boosters for a total of 66 launches, and is now being considered for future use with the Space Shuttle. Centaur's high-energy oxygen-hydrogen propellant combination provides the maximum performance capability for launching geosynchronous and earth-escape missions with both boosters. Shuttle/Centaur performance, combined with the demonstrated low-thrust operating capability of the Centaur engines, will allow gentle transfer of large communications spacecraft into geostationary orbit, thus significantly increasing the economies of communication satellites. This paper presents Centaur configurations, payload capabilities, and payload envelopes for future applications.

Rector, W. F., III↗
NASA NTRS1983

LO2/LH2 propulsion for outer planet orbiter spacecraft

Galileo class orbiter missions (750-1500 kg) to the outer planets require a large postinjection delta-V for improved propulsion performance. The present investigation shows that a pump-fed low thrust LO2/LH2 propulsion system can provide a significantly larger net on-orbit mass for a given delta-V than a state-of-the-art earth storable, N2O4/monomethylhydrazine pressure-fed propulsion system. A description is given of a conceptual design for a LO2/LH2 pump-fed propulsion system developed for a Galileo class mission to the outer planets. Attention is given to spacecraft configuration, details regarding the propulsion system, the thermal control of the cryogenic propellants, and aspects of mission performance.

Garrison, P. W.↗
NASA NTRS1983

Simplified power processing for ion-thruster subsystems

Compared to chemical propulsion, ion propulsion offers distinct payload-mass increases for many future low-thrust earth-orbital and deep-space missions. Despite this advantage, the high initial cost and complexity of ion-propulsion subsystems reduce their attractiveness for most present and near-term spacecraft missions. Investigations have, therefore, been conducted with the objective to attempt to simplify the power-processing unit (PPU), which is the single most complex and expensive component in the thruster subsystem. The present investigation is concerned with a program to simplify the design of the PPU employed in a 8-cm mercury-ion-thruster subsystem. In this program a dramatic simplification in the design of the PPU could be achieved, while retaining essential thruster control and subsystem operational flexibility.

Wessel, F. J.↗
NASA NTRS1983

Development of advanced inert-gas ion thrusters

Inert gas ion thruster technology offers the greatest potential for providing high specific impulse, low thrust, electric propulsion on large, Earth orbital spacecraft. The development of a thruster module that can be operated on xenon or argon propellant to produce 0.2 N of thrust at a specific impulse of 3000 sec with xenon propellant and at 6000 sec with argon propellant is described. The 30 cm diameter, laboratory model thruster is considered to be scalable to produce 0.5 N thrust. A high efficiency ring cusp discharge chamber was used to achieve an overall thruster efficiency of 77% with xenon propellant and 66% with argon propellant. Measurements were performed to identify ion production and loss processes and to define critical design criteria (at least on a preliminary basis).

Poeschel, R. L.↗