Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEU”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Environmental Benefits of Closing the Solar Manufacturing and Recycling Loop: Preparation of Solar Manufacturing Inventories

The cumulative global solar panel waste stream is projected to reach between 60 and 78 million tonnes by 2050. Steps towards developing, demonstrating, and implementing processes that recover glass, metals, and semiconductor materials from end-of-life solar panels have already been taken. However, these processes result in the downcycling of most secondary solar materials. Critically, the costs and benefits of capturing these secondary materials for use in new solar panels are unknown. To evaluate the environmental benefit associated with solar material recycling and reuse in next generation panels, prior inventories must be updated and prepared for integration with recycling processes to examine the benefit of closing the material loop between solar panel end-of-life and new panel manufacturing. This current work describes steps taken to upgrade existing inventories that detail the manufacturing of cadmium-telluride (CdTe) panels from the Ecoinvent -v2.2 life cycle inventory database to Ecoinvent -v3. During this update, material inventories were modified to capture different realistic material supply chains within the constraints of Ecoinvent -v3. Materials discussed in detail in this work include primary flat glass, aluminum, steel, copper, and CdTe. This work demonstrated that environmental indicators such as embodied carbon, acidification, and terrestrial eutrophication associated with solar panel production can be reduced by 25% to over 40% through improved primary material sourcing.

CdTe solar panels↗
DOE OSTI2023

Experimental approach for development of a powder spreading metric in additive manufacturing

The powder spreading is a vital step of powder-based additive manufacturing (AM) processes. The quality of spread powder can considerably influence the properties of fabricated parts. Poorly packed powder beds with high surface roughness result in printed part layers with large porosity and low dimensional accuracy, leading to poor mechanical properties. Therefore, the powder spreadability and its dependence on process parameters and powder characteristics should be quantified to improve the efficiency of powder-based AM methods. This study proposes a novel dimensionless powder spreadability metric that can be commonly used in different powder-based AM processes. The quality of spread powder in terms of powder bed density and surface roughness was evaluated by adjusting the process parameters including recoating velocity and layer thickness, and powder characteristics including particle size distribution. In addition, the dynamic repose angle was proposed and examined as another powder spreadability metric. Furthermore, the results showed that these two proposed metrics were strongly correlated and lower recoating velocity and larger layer thickness led to higher spreadability and lower dynamic repose angle.

36 MATERIALS SCIENCE↗
DOE OSTI2017

A review of slip transfer: applications of mesoscale techniques

In this review article, we present and discuss recent mesoscale modeling studies of slip transmission of dislocations through biphase interfaces. Specific focus is given to fcc/fcc material systems. We first briefly review experimental, atomistic, and continuum-scale work that has helped to shape our understanding of these systems. Then several mesoscale methods are discussed, including Peierls–Nabarro models, discrete dislocation dynamics models, and phase field-based techniques. Recent extensions to the mesoscale mechanics technique called phase field dislocation dynamics are reviewed in detail. Results are compiled and discussed in terms of the proposed guidelines that relate composite properties to the critical stress required for a slip transmission event.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The transmittance and sheet resistance of chemically and heat reduced graphene oxide film

The graphene oxide (GO) sheets were prepared from Hummer’s method. The reduced process is important to graphene related materials for widely functional use in many photoelectric fields. Chemically and heat reduced treatment are carried out in this research and the electrical and optical properties of reduced GO films are measured. The size of GO sheets was examined by transmission electron microscopy with a size of about 5–6 µm. The chemically converted graphene (CCG) film are made by spin coating method. We used different GO concentration and different spin coating times to investigate the properties of graphene transparent conductive films. As the decrease of the GO concentration of solution and the times of spin coating, the transmittance is higher. The electrical property of the mixing of GO and CCG is more stable than the GO sheets only, this is discussed in this research and it is cause by the stacking condition of sheets. The conductivity of reduced graphene oxide film come from GO is lower than that come from CCG, we suppose that is because that the overlapping is less (i.e. film-forming ability) in the former, the transmittance and sheet resistance are 56 T% and 50 kohm/sq.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Predicting Fluid Flow Regime, Permeability, and Diffusivity in Mudrocks from Multiscale Pore Characterisation

In geoenergy applications, mudrocks prevent fluids to leak from temporary (H 2 , CH 4 ) or permanent (CO 2 , radioactive waste) storage/disposal sites and serve as a source and reservoir for unconventional oil and gas. Understanding transport properties integrated with dominant fluid flow mechanisms in mudrocks is essential to better predict the performance of mudrocks within these applications. In this study, small-angle neutron scattering (SANS) experiments were conducted on 71 samples from 13 different sets of mudrocks across the globe to capture the pore structure of nearly the full pore size spectrum (2 nm–5 μm). We develop fractal models to predict transport properties (permeability and diffusivity) based on the SANS-derived pore size distributions. The results indicate that transport phenomena in mudrocks are intrinsically pore size-dependent. Depending on hydrostatic pore pressures, transition flow develops in micropores, slip flow in meso- and macropores, and continuum flow in larger macropores. Fluid flow regimes progress towards larger pore sizes during reservoir depletion or smaller pore sizes during fluid storage, so when pressure is decreased or increased, respectively. Capturing the heterogeneity of mudrocks by considering fractal dimension and tortuosity fractal dimension for defined pore size ranges, fractal models integrate apparent permeability with slip flow, Darcy permeability with continuum flow, and gas diffusivity with diffusion flow in the matrix. This new model of pore size-dependent transport and integrated transport properties using fractal models yields a systematic approach that can also inform multiscale multi-physics models to better understand fluid flow and transport phenomena in mudrocks on the reservoir and basin scale.

36 MATERIALS SCIENCE↗
DOE OSTI2017

The Evolution of the Weld Metal Microstructures in Dissimilar Titanium Welds Based on Al and Mo Equivalents

CO{sub 2} laser welding of Ti-15V-3Cr-3Al-3Sn to Ti-4.5Al-3V-2Fe-2Mo was conducted in the study. The notched fracture and microstructures of the weld metal (WM) with various post-weld aging treatments were studied. In the as-welded sample, the WM comprised only β phase, which was relatively soft and ductile. Moreover, the phase constituent of the as-welded WM was related to the Al and Mo equivalents and further compared with other welds. The microstructural morphologies and microhardness of the WMs of dissimilar welds exhibited significant changes after post-weld aging at distinct temperatures. Increasing the Al equivalent ([Al]{sub EQ}) of the WM caused an increased response to age-hardening during post-weld aging treatments. When the aging temperature was increased from 426 to 593 °C, the α precipitates in the WM grew in size, causing a decrease in hardness, but an improvement in toughness.

36 MATERIALS SCIENCE↗
DOE OSTI2017

A Two-Way Shape Memory Study on Ni-Rich NiTi Shape Memory Alloy by Combination of the All-Round Treatment and the R-Phase Transformation

Ni{sub 4}Ti{sub 3} precipitates are formed in Ni-rich NiTi shape memory alloys (SMAs) after a certain heat treatment. Such a treatment then results in the changed phase transformation behavior of the alloy switching from the one-step reversible phase change B2 ↔ B19′ to the two-step, B2 ↔ R ↔ B19′, phase change. The present study reports a two-way shape memory (TWSM) due to an all-round treatment followed by an R-phase constraint aging at room temperature. The enhanced TWSM behavior was observed upon temperature cycling between 273 K (R-phase) and 77 K (B19′ phase). The effect of various constraint strains in R-phase aging by employing different diameters of the constraint ring was studied. However, the TWSM effect due to constraining the R-phase will be eliminated after a temperature rise of specimen to the fully parent phase (373 K).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Micromechanical Fields Associated with Irregular Deformation Twins in Magnesium

Understanding and controlling the development of deformation twins is paramount for engineering strong and stable hexagonal close-packed (HCP) Mg alloys. Actual twins are often irregular in boundary morphology and twin crystallography, deviating from the classical picture commonly used in theory and simulation. In this work, the elastic strains and stresses around irregular twins are examined both experimentally and computationally to gain insight into how twins develop and the microstructural features that influence their development. A nanoprecession electron diffraction (N-PED) technique is used to measure the elastic strains within and around a $\left\{ {10\overline{1}2} \right\}$ tensile twin in AZ31B Mg alloy with nm scale resolution. A full-field elasto-viscoplastic fast Fourier transform (EVP-FFT) crystal plasticity model of the same sub-grain and irregular twin structure is employed to understand and interpret the measured elastic strain fields. The calculations predict spatially resolved elastic strain fields in good agreement with the measurement, as well as all the stress components and the dislocation density fields generated by the twin, which are not easily obtainable from the experiment. The model calculations find that neighboring twins, several twin thicknesses apart, have little influence on the twin-tip micromechanical fields. Furthermore, this work reveals that irregularity in the twin-tip shape has a negligible effect on the development of the elastic strains around and inside the twin. Importantly, the major contributor to these micromechanical fields is the alignment of the twinning shear direction with the twin boundary.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigation of Mechanical Properties of Parts Fabricated with Gas- and Water-Atomized 304L Stainless Steel Powder in the Laser Powder Bed Fusion Process

In this report the use of gas-atomized powder as the feedstock material for the Laser Powder Bed Fusion (L-PBF) process is common in the Additive Manufacturing (AM) community. Although gas-atomization produces powder with high sphericity, its relatively expensive production cost is a downside for application in AM processes. Water atomization of powder may overcome this limitation due to its low cost relative to the gas-atomization process. In this work, gas- and water-atomized 304L stainless steel powders were morphologically characterized through Scanning Electron Microscopy (SEM). The water-atomized powder had a wider particle size distribution and exhibited less sphericity. Measuring powder flowability using the Revolution Powder Analyzer (RPA) indicated that the water-atomized powder had less flowablility than the gas-atomized powder. Through examining the mechanical properties of L-PBF fabricated parts using tensile tests, the gas-atomized powder had significantly higher yield tensile strength and elongation than the water-atomized powder, however, their ultimate tensile strengths were not significantly different.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Building Zr-based metallic glass part on Ti-6Al-4V substrate by laser-foil-printing additive manufacturing

Through using Zr intermediate layers, Zr 65.7 Ti 3.3 Al 3.7 Ni 11.7 Cu 15.6 metallic glass (MG) parts are successfully built on Ti-6Al-4V substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils are laser welded layer-by-layer onto the substrate. The printed MG part is free of porosity, cracking and crystallization; additionally, its glass transition temperature, crystallization temperature, micro-hardness, and tensile strength are very similar to the original MG material. The Zr intermediate layers are aimed at preventing direct interaction between the first layer of MG foil and the Ti substrate; otherwise, the welded MG foils would peel off from the substrate due to the formation of hard and brittle intermetallic compounds. Finally, with the use of Zr intermediate layers, the bonding strength between the printed MG part and the Ti substrate can reach 758 MPa owing to the formation of α-Zr phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation of twin growth mechanisms in precipitate hardened AZ91

Here, in this work, an elasto-viscoplastic fast-Fourier-transform (EVP-FFT) model with a dislocation-density (DD) based hardening law is employed to study the growth of a {10$\bar{1}$2} tensile twin that is blocked by basal-precipitates in precipitate-hardened AZ91 magnesium alloy. It is frequently reported that twin growth is hindered in precipitate-hardened Mg alloys; however, thick twin domains are often observed experimentally in these material systems. Detailed numerical investigation of deformation twinning starting from an early propagation stage, before twin growth, reveals that the stress fields that result from two sequentially propagated twins co-impinging on a precipitate relaxes the twin back stress locally and promotes twin growth at the twin-precipitate junction. Based on these findings, a two-step growth mechanism is proposed for twins arrested by precipitates. In the first step, the interaction of a twin tip with a precipitate develops a stress concentration on the other side of the precipitate, prompting the formation of a second twin. Subsequently, the back stresses associated with the first twin are relaxed by the formation of the second twin, allowing the first twin to grow at the twin-precipitate junction and eventually engulf the precipitate. This mechanism suggests that twin growth can be achieved locally with minimal additional external forces, explaining how relatively large twin domains can develop even in the presence of arrays of precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2017

A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying

An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. Heere in this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, it is surrounded by oil (to a level just below the top surface of most recent layer) to preclude non-uniform evaporation from the sides. Infrared radiation is then used to partially, and uniformly, dry the just-deposited layer so that the yield stress of the paste increases and the part maintains its shape. The same procedure is repeated for every layer until part fabrication is completed. Several sample parts for various applications were produced using this process and their properties were obtained. The results indicate that the proposed method enables fabrication of large, dense ceramic parts with complex geometries.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evolution of AISI 304L stainless steel part properties due to powder recycling in laser powder-bed fusion

Selective laser melting (SLM) is a powder-bed fusion process in Additive Manufacturing (AM) that uses a laser beam to selectively fuse layers of powder into near net-shape components with little porosity. However, inconsistencies in the part properties due to the presence of defects in as-built components has hindered the widespread adoption of SLM for industrial applications forcing researchers to study the sources of variation for quality control purposes. A critical area suspected of creating variation in the part properties is the feedstock, where batch-to-batch differences as well as changes in the powder properties with reuse have the potential to affect performance. During processing, laser spatter and condensate eject from the melt pool and deposit into the powder-bed surrounding the parts. These particulates, more commonly known as ejecta, differ morphologically and chemically from the virgin powder compromising its reusability. In this study, 304L stainless steel powder was recycled for a total of 5 times through a systematic approach aimed at accelerating powder degradation to reveal the influence on both the tensile and impact toughness properties. Through analysis of variance (ANOVA), it was found that tensile properties did not change with reuse, while the impact toughness showed a steady decline illustrating the differences in static and dynamic part properties due to powder recycling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling powder spreadability in powder-based processes using the discrete element method

Powder-bed fusion (PBF) processes refer to a subset of Additive Manufacturing (AM) techniques where powder is spread on the build-plate before melting (by a laser or electron beam). While PBF processes are attractive due to their ability for realizing complex structures that are either difficult or impossible to create through conventional means, the parts fabricated with these techniques can exhibit defects such as pores, inclusions, and excessive surface roughness. To minimize these defects, much research has been dedicated towards process maturation by optimizing laser or electron beam parameters. However, these developmental efforts typically do not address the recoating process where achieving dense and uniform layers of powder is a necessity for ensuring process repeatability and part quality. While the recoating process can be studied through experimentation, the dynamics of particle movement are difficult to analyze experimentally. Therefore, here, in this study, powder spreading in PBF was simulated through the Discrete Element Method (DEM) to elucidate the mechanisms that control powder-bed quality. Utilizing the Buckingham Pi theorem, a dimensionless metric referred to as the spreading index is developed that combines powder-bed density, roughness, and particle size to assess the quality of powder layers. The formulated spreading index is then related to several dimensionless quantities that provide insight into the mechanisms dominating powder spreading in PBF. The DEM simulations conducted in this work focused on the scenario where powder is spread onto an existing powder bed and revealed that a reduction in the recoating velocity causes an increase in the spreading index while little to no impact on the spreading index was observed when varying layer thickness from 30 μm to 75 μm.Particle size effects on the powder-bed quality were also investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Scale effects on core design, fuel costs, and spent fuel volume of pressurized water reactors

The desire to improve the economic competitiveness and deployment pace of nuclear energy through modularization, manufacturing, and series production had led to the development of smaller size reactors. As the standard 17x17 fuel technology is mainly maintained in the pressurized water reactors (PWRs) category, this translates into a lower number of fuel assemblies in the core and sometimes a reduced fuel height. To assess the impact of such scale change in core design on fuel cycle cost and spent fuel volume, a scoping analysis tool is developed based on infinite lattice calculations, leakage, fuel management reduced models, and levelized unit cost of electricity (LCOE) estimate. As such, cost dynamics driven by fuel specific power, burnup, core leakage, feed, cycle length, fuel assembly height as well as uranium market data are captured with consistent set of assumptions and analysis methods. A selection of 5 reactor designs representative of leading PWR developers is assessed and compared. Pursuing higher specific powers and optimal burnups are highlighted as the main fuel cost reduction drivers, nevertheless, practical limitations and opportunities must be evaluated to establish the feasibility of such enhanced fuel operation. In consequence, a detailed core design is performed using SIMULATE3 code for 5 PWR variations including natural and forced coolant circulation modes, two reactor scales, power densities of 73, 112, and 123 kW/l and higher discharge burnups. Design and optimization are performed at the lattice level, for the reflector, and at the core loading level. Satisfactory steady-state operation including power distribution, coolant operating limits, and reactivity requirements are analyzed and reported in this paper. The fuel economics of the detailed core designs confirm the scoping analysis findings. Despite the unlocked power uprates in small PWRs, the achievable burnup for a given fuel specific power requires more enrichment and shorter fuel height results in higher fabrication costs per mass of fuel, which makes scaling down core size a more expensive endeavor on the fuel cycle front. Spent fuel volumes are reported for the PWRs designed in this paper. Furthermore, these volumes are driven by the core average discharge burnup regardless of the scale in consideration. Additional cost and core performance aspects related to heavy reflector gains, fuel-reflector substitution, and disposal cost policy in the U.S. are examined.

42 ENGINEERING↗
DOE OSTI2014

Early life ethanol exposure causes long-lasting disturbances in rat mesenchymal stem cells via epigenetic modifications

Highlights: • Ethanol exposure alters proliferation and differentiation of MSCs. • Ethanol exposure suppresses osteogenesis and adipogenesis of MSCs. • H3K27me3-associated genes/pathways are affected in ethanol-exposed MSCs. • Expression of lineage-specific genes is dysregulated in ethanol-exposed MSCs. - Abstract: Fetal alcohol syndrome (FAS) is a birth defect due to maternal alcohol consumption during pregnancy. Because mesenchymal stem cells (MSCs) are the main somatic stem cells in adults and may contribute to tissue homeostasis and repair in adulthood, we investigated whether early life ethanol exposure affects MSCs and contributes to the propensity for disease onset in later life. Using a rodent model of FAS, we found that ethanol exposure (5.25 g/kg/day) from postnatal days 4 to 9 in rat pups (mimic of human third trimester) caused long-term anomalies in bone marrow-derived MSCs. MSCs isolated from ethanol-exposed animals were prone to neural induction but resistant to osteogenic and adipogenic inductions compared to their age-matched controls. The altered differentiation may contribute to the severe trabecular bone loss seen in ethanol-exposed animals at 3 months of age as well as overt growth retardation. Expression of alkaline phosphatase, osteocalcin, aP2, and PPARγ were substantially inhibited, but BDNF was up-regulated in MSCs isolated from ethanol-exposed 3 month-old animals. Several signaling pathways were distorted in ethanol-exposed MSCs via altered trimethylation at histone 3 lysine 27. These results demonstrate that early life ethanol exposure can have long-term impacts in rat MSCs by both genetic and epigenetic mechanisms.

60 APPLIED LIFE SCIENCES↗