Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Bent core liquid crystal elastomers

Liquid crystal (LC) elastomers with bent-core side-groups incorporate the properties of bent-core liquid crystals in a flexible and self-supporting polymer network. Bent-core liquid crystal elastomers (BCEs) with uniform alignment were prepared by attaching a reactive bent-core LC to poly(hydrogenmethylsiloxane) and crosslinking with a divinyl crosslinker. Phase behavior studies indicate a nematic phase over a wide temperature range that approaches room temperature, and thermoelastic measurements show that these BCEs can reversibly change their length by more than a factor of two upon heating and cooling. Small-angle X-ray scattering studies reveal multiple, broad low-angle peaks consistent with short-range smectic C order of the bent-core side groups. A comparison of these patterns with predictions of a Landau model for short-range smectic C order shows that the length scale for smectic ordering in BCEs is similar to that seen in pure bent-core LCs. The combination of rubber elasticity and smectic ordering of the bent-core side groups suggests that BCEs may be promising materials for sensing, actuating, and other advanced applications.

36 MATERIALS SCIENCE↗

Experimental and Theoretical Studies of the Acid-Catalyzed Conversion of Furfuryl Alcohol to Levulinic Acid in Aqueous Solution

The conversion of furfuryl alcohol (FAL) to levulinic acid over Amberlyst TM 15 in aqueous media was investigated using a combination of liquid chromatography-mass spectrometry (LC-MS) measurements, isotopic labeling studies, nuclear magnetic resonance (NMR) spectroscopy, and ab initio quantum chemical calculations using the G4MP2 method. The results of these combined studies showed that one of the major reaction pathways takes place via a geminal diol species (4,5,5- trihydroxypentan-2-one, denoted as intermediate A), formed by the addition of two water molecules to FAL, where two of the oxygen atoms from FAL are retained. This geminal diol species can also be produced from another intermediate found to be a dimer-like species, denoted as intermediate B. This dimer-like species is formed at the early stages of reaction, and it can also be converted to intermediate A, indicating that intermediate B is the product of the reaction of FAL with another early intermediate. Quantum chemical calculations suggested this to be a protonated acyclic species. Reaction of this early intermediate with water produces intermediate A, while reaction with FAL produces intermediate B.

Environmental Molecular Sciences Laboratory↗

Molecular Characterization of Brown Carbon (BrC) Chromophores in Secondary Organic Aerosol Generated From Photo-Oxidation of Toluene

Atmospheric Brown carbon (BrC) is a significant contributor to light absorption and climate forcing. However, little is known about a fundamental relationship between the chemical composition of BrC and its optical properties. In this work, light-absorbing secondary organic aerosol (SOA) was generated in the PNNL chamber from toluene photo-oxidation in the presence of NOx (Tol-SOA). Molecular structures of BrC components were examined using nanospray desorption electrospray ionization (nano-DESI) and liquid chromatography (LC) combined with UV/Vis spectroscopy and electrospray ionization (ESI) high-resolution mass spectrometry (HRMS). The chemical composition of BrC chromophores and the light absorption properties of toluene SOA (Tol-SOA) depend strongly on the initial NOx concentration. Specifically, Tol-SOA generated under high-NOx conditions (defined here as initial NOx/toluene of 5/1) appears yellow and mass absorption coefficient of the bulk sample (MACbulk@365nm = 0.78 m2 g-1) is nearly 80 fold higher than that measured for the Tol-SOA sample generated under low-NOx conditions (NOx/toluene < 1/300). Fifteen compounds, most of which are nitrophenols, are identified as major BrC chromophores responsible for the enhanced light absorption of Tol-SOA material produced in the presence of NOx. The integrated absorbance of these fifteen chromophores accounts for 40-60% of the total light absorbance by Tol-SOA at wavelengths between 300 nm and 500 nm. The combination of tandem LC-UV/Vis-ESI/HRMS measurements provides an analytical platform for predictive understanding of light absorption properties by BrC and their relationship to the structure of individual chromophores. General trends in the UV/vis absorption by plausible isomers of the BrC chromophores were evaluated using theoretical chemistry calculations. The molecular-level understanding of BrC chemistry is helpful for better understanding the evolution and behavior of light absorbing aerosols in the atmosphere.

Environmental Molecular Sciences Laboratory↗

Positioning colloids at the surfaces of cholesteric liquid crystal droplets

We report on the internal configurations of aqueous dispersions of droplets of cholesteric liquid crystals (LCs; 5–50 μm-in-diameter; comprised of 4-cyano-4'-pentylbiphenyl and 4-(1-methylheptyloxycarbonyl)phenyl-4-hexyloxybenzoate) and their influence on the positioning of surface-adsorbed colloids (0.2 or 1 μm-in-diameter polystyrene (PS)). When N = 2D/P was less than 4, where D is the droplet diameter and P is the cholesteric pitch, the droplets adopted a twisted bipolar structure (TBS) and colloids were observed to assume positions at either the poles or equator of the droplets. A statistical analysis of the distribution of locations of the colloids revealed a potential well of depth 2.7 k B T near the equator, a conclusion that was supported by computer simulations performed via the minimization of the Landau–de Gennes free energy (well depth of 7 k B T from simulation). In contrast, for N > 4, a majority of the droplets exhibited a radial spherical structure (RSS) characterized by a pair of closely spaced surface defects (angle of separation with respect to the center of the droplet θ < 5°) connected by a disclination winding to/from the droplet center, which led to the positioning of pairs of colloids with well-defined spacing at these surface defects. The separation of the pairs of surface-adsorbed colloids was colloid size-dependent, ranging from 1.11 ± 0.04 μm for 1 μm-in-diameter colloids to 1.7 ± 0.2 μm for 200 nm-in-diameter colloids. We also observed long-lived metastable configurations in which the two surface point defects were separated by much larger distances (corresponding to populations with angles of θ = 20 ± 10° and 85 ± 10° with respect to the center), and observed these pairs of defects to also position pairs of colloids. A third configuration, the diametrical spherical structure (DSS) was also observed. Consistent with the predictions of computer simulations, we found experimentally that the DSS is indeed composed of disconnected defect rings positioned along the diameter of the droplet. Finally, these results reveal that the rich palette of defects exhibited by confined cholesteric LC systems (equilibrium and metastable) provide the basis of a versatile class of templates that enable the surface positioning of colloids in ways that are not possible with achiral LC droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of anions in adsorbate-induced anchoring transitions of liquid crystals on surfaces with discrete cation binding sites

We report a combined theoretical and experimental effort to elucidate systematically for the first time the influence of anions of transition metal salt-decorated surfaces on the orientations of supported films of nematic liquid crystals (LCs) and adsorbate-induced orientational transitions of these LC films. Guided by computational chemistry predictions, we find that nitrate anions weaken the binding of 4'-n-pentyl-4-biphenylcarbonitrile (5CB) to transition metal cations, as compared to perchlorate salts, although binding is still sufficiently strong to induce homeotropic (perpendicular) orientations of 5CB. In addition, we find the orientations of the LC to be correlated across all metal cations investigated by a molecular anchoring energy density that is calculated as the product of the single-site binding energy and metal cation binding site density on the surface. The weaker single-site binding energy caused by nitrate also facilitates competitive binding of adsorbates to the metal cations, leading to more facile orientational transitions induced by adsorbates. Finally, our analysis suggests that nitrate anions recruit water via hydrogen bonding to the metal binding sites, modulating further the relative net binding energies of 5CB and adsorbates to surfaces decorated with metal nitrates. After accounting for the presence of water, we find a universal exponential relationship between the calculated displacement free energies and measured dynamic response of LCs to adsorbates for all metal salts studied, independent of the metal salt anion.

Szilvási, Tibor↗

Ligand-triplet migration in iridium( iii ) cyclometalates featuring π-conjugated isocyanide ligands

The manipulation of the triplet excited state manifold leads to large differences in the photophysical properties within a given class of metal–organic chromophores. By the appropriate choice of ancillary ligand, large changes can be made both to the order and nature of the lowest excited states and therefore to the resulting photophysical properties. Herein, a series of four bis-2-phenylpyridine (ppy) cyclometalated Ir(III) compounds bearing two arylisocyanide ligands were synthesized and photophysically characterized to understand the effects of using ancillary ligands featuring systematic changes in π-conjugation. By varying the arylisocyanide ligands, the photoluminescence quantum yield ranged from 5% to 49% and the excited state lifetime ranged between 24 μs and 2 ms. These variations in photophysical response are consistent with lowering the triplet ligand-centered ( 3 LC) state of the arylisocyanide ligand as the π system was extended, confirmed by 77 K photoluminescence emission spectra and ultrafast transient absorption experiments. Here, the latter analysis gleaned detailed insight into the importance of the interplay of the 3 LC state of the phenylpyridine and arylisocyanide ligands in these polychromophic Ir(III) molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of ion beam irradiation and rubbing on the directional behavior and alignment mechanism of liquid crystals on polyimide surfaces

We investigated the effects of ion beam (IB) irradiation and rubbing on the directional behavior and alignment mechanism of liquid crystals (LCs) on polyimide (PI) surfaces. We found that the LC direction follows the IB irradiation alignment direction on the PI surface regardless of whether the irradiation occurs before or after rubbing. We assumed that the LC direction depends strongly on the C-O bonds created from C=O bonds on the PI surface broken by IB irradiation and conducted an investigation of the chemical bonding state of the PI surface by x-ray photoelectron spectroscopy.

36 MATERIALS SCIENCE↗

Development of an Ion Beam Irradiation System for Liquid Crystal Alignment Layer Production

Ion beam irradiation was employed to produce alignment layers for liquid crystal (LC) displays. The alignment characteristics were compared with those by the conventional rubbing method. Ion incident angle to the films played an important role in LC sample optical qualities. A new ion irradiation method to realize a multi-domain structure for a wide viewing angle was demonstrated.

36 MATERIALS SCIENCE↗

Vertically aligned liquid crystals on a {gamma}-Al{sub 2}O{sub 3} alignment film using ion-beam irradiation

Using ion-beam (IB) irradiation, liquid crystals (LCs) were vertically aligned (VA) on a {gamma}-Al{sub 2}O{sub 3} alignment film. Atomic-layer deposition was used to orient the LCs on high-quality {gamma}-Al{sub 2}O{sub 3} alignment films. The LC molecule orientation indicates the vertical direction of the atomic-layer-deposited {gamma}-Al{sub 2}O{sub 3} alignment films. X-ray photoelectron spectroscopy showed that IB irradiation changed the chemical structure, shifting the Al-O binding energy and altering the Al-O bonding intensity. The low-voltage transmittance characteristics of the VA LC displays on the {gamma}-Al{sub 2}O{sub 3} alignment films were also measured, showing reduced voltage and power requirements.

36 MATERIALS SCIENCE↗

Zinc oxide nanolevel surface transformation for liquid crystal orientation by ion bombardment

This paper introduces the characteristics of the zinc oxide (ZnO) inorganic film deposited by radio-frequency magnetron sputtering as an alternative alignment layer for liquid crystal display (LCD) applications. The crystalline structure related to the texture formation of ZnO (1013) was observed with a tilt angle of approximately 28.1 deg. to the ZnO (0001) plane, leading to a smooth surface and high-density structure. Ion beam (IB) bombardment at various incident angles was used to induce liquid crystal (LC) alignment and cause the measured pretilt angle on ZnO films to assume a triangular contour. The orientation order of liquid crystal molecules was due to the van der Waals force for the vertical alignment of LCs with selective breaking of O-Zn bonds by IB bombardment. The contact angle contour as a function of the IB incident angle resembled the behavior of the pretilt angle. The pretilt angle is controllable by adjusting the surface features on ZnO films with IB bombardment. The electro-optic characteristics of vertically aligned (VA)-LCD based on ZnO film were comparable to those of VA-LCD based on polyimide, showing good potential of ZnO film as a LC alignment layer.

36 MATERIALS SCIENCE↗

The correlation between electron density and anchoring strength in the inorganic vertical alignment layer

The relationship between the liquid crystal (LC) alignment and the density of the silicon oxide alignment layer was studied by theoretical and experimental approaches. The thin films were deposited by various methods and conditions, and then their densities were analyzed by x-ray reflectivity measurement. The alignment of LC was highly dependent on their densities, which we found to be closely related to the number of interacting dipoles. Ultimately, a-SiO{sub x} thin film with lower density gives rise to the uniform vertical alignment of liquid crystal.

36 MATERIALS SCIENCE↗

Progress on Frequency-Domain Multiplexing Development for High Count rate X-ray Microcalorimeters

Frequency-domain multiplexing is one of the candidates for the readout of TES-based imaging microcalorimeter arrays for applications such as IXO. The readout system uses the TES as the modulating element, a bandpass LC filter to separate the signals in frequency space, and a customized SQUID with a low input inductance and high dynamic range as cryogenic amplifier. We will show the latest experimental progress on the development of this system. The paper concentrates on our first results on multiplexing 2-7 channels at bias frequencies below 5 MHz using discrete LC filters and baseband feedback electronics. In addition to that, the scalability of the system will be addressed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Laser initiated thermal tuning of a cholesteric liquid crystal

We report on the large wavelength range and light-initiated thermal tuning of the reflection of a liquid crystal (LC) formulation (S811/ZLI-2806) near a smectic (SmA) to cholesteric (CLC) phase transition enabled by the use of a high order parameter heat transfer dye (anthraquinone, AQ). Upon irradiation with a 647 nm Krypton ion (Kr{sup +}) laser line, absorption by AQ generates heat that is transferred to the surrounding LC host. In the S811/ZLI-2806 formulation examined here, the optically generated increase in temperature serves to transition the phase from SmA to CLC. As has been documented, the SmA->CLC transition is typified by a pitch contraction that blueshifts the position of the CLC reflection, in this case a shift from 2500 to 700 nm that can occur in less than 100 s. The tuning range and speed are dependent on the laser power and the amount of dye in the cell.

36 MATERIALS SCIENCE↗

Spin-orbit relativistic long-range corrected time-dependent density functional theory for investigating spin-forbidden transitions in photochemical reactions

A long-range corrected (LC) time-dependent density functional theory (TDDFT) incorporating relativistic effects with spin-orbit couplings is presented. The relativistic effects are based on the two-component zeroth-order regular approximation Hamiltonian. Before calculating the electronic excitations, we calculated the ionization potentials (IPs) of alkaline metal, alkaline-earth metal, group 12 transition metal, and rare gas atoms as the minus orbital (spinor) energies on the basis of Koopmans' theorem. We found that both long-range exchange and spin-orbit coupling effects are required to obtain Koopmans' IPs, i.e., the orbital (spinor) energies, quantitatively in DFT calculations even for first-row transition metals and systems containing large short-range exchange effects. We then calculated the valence excitations of group 12 transition metal atoms and the Rydberg excitations of rare gas atoms using spin-orbit relativistic LC-TDDFT. We found that the long-range exchange and spin-orbit coupling effects significantly contribute to the electronic spectra of even light atoms if the atoms have low-lying excitations between orbital spinors of quite different electron distributions.

74 ATOMIC AND MOLECULAR PHYSICS↗

A theoretical investigation on photocatalytic oxidation on the TiO{sub 2} surface

The TiO{sub 2} photocatalytic oxidation mechanism was theoretically investigated by using long-range corrected time-dependent density functional theory (LC-TDDFT) with a cluster model of the anatase TiO{sub 2}(001) surface. We found that LC-TDDFT with the cluster model quantitatively reproduces the photoexcitations of the TiO{sub 2} surface by calculating the electronic spectra of a clean TiO{sub 2} surface and one with oxygen defects. We calculated the electronic spectra of a molecularly adsorbed TiO{sub 2} surface for the adsorptions of phenol, methanol, and methane molecules as typical organic molecules. We obtained the surprising result that the main peak of the phenol-adsorbed TiO{sub 2} surface, which overlaps with the main peak of the clean TiO{sub 2} surface, corresponds to charge transfers from the phenol molecule to the TiO{sub 2} surface. This indicates that the TiO{sub 2} photocatalytic oxidation proceeds through direct charge transfer excitation from the substrate molecules to the TiO{sub 2} surface. In contrast, we found slight and no charge transfer for methanol and methane adsorption, respectively, in agreement with the experimental findings for their reactivities. In light of these results, we propose a new mechanism for heterogeneous TiO{sub 2} photocatalytic oxidations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amplification of interference color by using liquid crystal for protein detection

Micrometer-sized, periodic protein lines printed on a solid surface cause interference color which is invisible to the naked eye. However, the interference color can be amplified by using a thin layer of liquid crystal (LC) covered on the surface to form a phase diffraction grating. Strong interference color can thus be observed under ambient light. By using the LC-amplified interference color, we demonstrate naked-eye detection of a model protein—immunoglobulin G (IgG). Limit of detection can reach 20 μg/ml of IgG without using any instrumentation. This detection method is potentially useful for the development of low-cost and portable biosensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gelator-doped liquid-crystal phase grating with multistable and dynamic modes

We demonstrate a gelator-doped nematic liquid-crystal (LC) phase grating, which can be operated in both the multistable mode and the dynamic mode. Thermoreversible association and dissociation of the gelator molecules can vary and fix the multistable diffraction efficiencies of the gratings. A voltage (V) can also be applied to modulate dynamically the diffraction efficiencies of the grating, which behaves as a conventional LC grating. Experimental results show that the variations of the diffraction efficiencies in the multistable and dynamic modes are similar. The maximum diffraction efficiency is approximately 30% at V = 2 V.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Metallophilic interactions from dispersion-corrected density-functional theory

In this article, we present the first comprehensive study of metallophilic (aurophilic) interactions using dispersion-corrected density-functional theory. Dispersion interactions (an essential component of metallophilicity) are treated using the exchange-hole dipole moment (XDM) model. By comparing against coupled-cluster benchmark calculations on simple dimers, we show that LC-ωPBE-XDM is a viable functional to study interactions between closed-shell transition metals and that it performs uniformly better than second-order Møller-Plesset theory, the basic computational technique used in previous works. We apply LC-ωPBE-XDM to address several open questions regarding metallophilicity, such as the interplay between dispersion and relativistic effects, the interaction strength along group 11, the additivity of homo- and hetero-metallophilic effects, the stability of [E(AuPH{sub 3}){sub 4}]{sup +} cations (E = N, P, As, Sb), and the role of metallophilic effects in crystal packing. We find that relativistic effects explain the prevalence of aurophilicity not by stabilizing metal-metal contacts, but by preventing gold from forming ionic structures involving bridge anions (which are otherwise common for Ag and Cu) as a result of the increased electron affinity of the metal. Dispersion effects are less important than previously assumed and their stabilization contribution is relatively independent of the metal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗