Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A Modular SiC High-Frequency Solid-State Transformer for Medium-Voltage Applications: Design, Implementation, and Testing

The advancements in wide-bandgap devices are enabling applications of power electronic converters coupled directly with medium-voltage (MV) grids that incorporate galvanic isolation within the converter using high-frequency solid-state transformers (SSTs). This paper presents analysis, design, and the characterization results of a 50-kVA modular soft-switched ac-ac SST using silicon carbide (SiC) MOSFET for MV (>6 kV ac) applications. Here, the SST is comprised of two hard-switched ac-line interface bridges and a resonant dc-dc stage switched at approximately 180 kHz. To minimize the cost of switching elements per ampere and maximize the design flexibility, the design uses multiple discrete SiC devices of, readily available, 1700-V ratings. This paper covers the analysis of soft-switching operation, control architecture, converter design, and system-level integration.

17 WIND ENERGY↗

Search for high frequency pulsations in the onset of the March 5 gamma-ray burst

The onset of the March 5 Gamma-Ray burst was observed with microsecond time resolution by the Monitor Proportional Counter aboard the HEAO-2/Einstein Observatory. The data were analyzed for high frequency periodic pulsations which, if present, would be strong evidence for vibrations of a neutron star following the initial release of energy. Evidence is not found for such pulsations in the data over the period range 29.4737 to 0.0962 ms, and upper limits to the amplitude of 49-70% are set.

Weisskopf, M. C.↗

High-frequency electromagnetic response of the moon.

It is shown that the contribution of higher harmonics to the lunar transfer functions for the tangential components of the surface magnetic field is significant at frequencies greater than 0.01 Hz. The inclusion of the higher harmonics shows that there are two distinct transfer functions corresponding to the components of the tangential surface magnetic field perpendicular and parallel to the direction of the wave vector of the external disturbance forcing the lunar induction. The dependences of these transfer functions on frequency and location are determined. The effects of the higher harmonics can (1) account for a hitherto unexplained feature in the Apollo 12 and Explorer 35 transfer functions, namely the rolloff at high frequencies, and (2) offer a possible explanation for the frequency dependence of the difference between the transfer functions for the two orthogonal components of the surface magnetic field.

Schubert, G.↗

Influence of Incidence Angle on Sound Generation by Airfoils Interacting with High-Frequency Gusts

A theoretical model is developed for the sound generated when a convected vortical or entropic gust encounters an airfoil at nonzero angle of attack. The theory is based on a linearization of the Euler equations about the steady, subsonic flow past the airfoil. High-frequency gusts, whose wavelengths are short compared to the airfoil chord, but long compared to the displacement of the mean-flow stagnation point from the leading edge, are considered. The analysis utilizes singular perturbation techniques and involves four asymptotic regions. Local regions, which scale on the gust wavelength, are present at the airfoil leading and trailing edges. Behind the airfoil a "transition" region, which is similar to the transition zone between illuminated and shadow zones in optical problems, is present. In the outer region, far away from the airfoil edges and wake, the solution has a geometric-acoustics form. The primary sound generation is found to be concentrated in the local leading-edge region. The trailing edge plays a secondary role as a scatterer of the sound generated in the leading-edge region. Parametric calculations are presented which illustrate that moderate levels of airfoil steady loading can significantly affect the sound field produced by airfoil-gust interactions.

Matthew R. Myers↗

High-Frequency Vertical Profiling of Meteorological Parameters Using AMF1 Facility during RAWEX?GVAX at ARIES, Nainital

An extensive field study, RAWEX-GVAX, was carried out during a 10-month (June 2011-March 2012) campaign at ARIES, Nainital and observations on a wide range of parameters like physical and optical properties of aerosols, meteorological parameters and boundary layer evolution were made. This work presents results obtained from high-frequency (four launches per day), balloon-borne observations of meteorological parameters (pressure, temperature, relative humidity, wind speed and wind direction). These observations show wind speed as high as 84 m/s near the subtropical jet. It is shown that reanalysis wind speeds are in better agreement at 250 hPa (altitude of subtropical jet) than those above or below this value (100 hPa or 500 hPa). These observations also demonstrate that AIRS-derived temperature profiles are negatively biased in the lower altitude region, whereas they are positively biased near the tropopause. WRF simulated results are able to capture variations in temperature, humidity and wind speed profile reasonable well. WRF and AIRS-derived tropopause height, tropopause pressure and tropopause temperature also show agreement with radiosonde estimates.

Aerosols↗

WFIP3 High Frequency Radar / Processed Data

These data were collected by Kirincich as part of the DOE Wind Forecast Improvement Project, based on support from NOAA-IOOS, WHOI, and DOE. The data consist of estimates of the near-surface horizontal (East and North) ocean currents made via High Frequency (HF) radar-based remote sensing of the Ocean backscatter spectrum. The effective measurement depth of the WHOI HF radars is 0.5 m below the ocean surface. The WHOI HF radar system, as operated during the experiment, consisted of 4 land-based sites spaced at 30-40km intervals along the area spanning from Nantucket,MA to Narragansett,RI that operate at 16 MHz and 25 MHz systems (see Kirincich et al, 2019 and Kirincich et al 2022 for details). Received doppler spectra from each were processed using the advanced methods of Kirincich et al. 2012, and Kirincich et al 2019, and unpublished work Kirincich, 2024) into radial or elliptical velocity estimates every 30 min based on a 30 min averaging window.

17 WIND ENERGY↗

Ion heating, burnout of the high-frequency field, and ion sound generation under the development of a modulation instability of an intense Langmuir wave in a plasma

The development of one-dimensional parametric instabilities of intense long plasma waves is considered in terms of the so-called hybrid models, with electrons being treated as a fluid and ions being regarded as particles. The analysis is performed for both cases when the average plasma field energy is lower (Zakharov's hybrid model—ZHM) or greater (Silin's hybrid model—SHM) than the plasma thermal energy. The efficiency of energy transfer to ions and to ion perturbations under the development of the instability is considered for various values of electron-to-ion mass ratios. The energy of low-frequency oscillations (ion-sound waves) is found to be much lower than the final ion kinetic energy. We also discuss the influence of the changes in the damping rate of the high-frequency (HF) field on the instability development. The decrease of the absorption of the HF field inhibits the HF field burnout within plasma density cavities and gives rise to the broadening of the HF spectrum. At the same time, the ion velocity distribution tends to the normal distribution in both ZHM and SHM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

From wide to ultrawide-bandgap semiconductors for high power and high frequency electronic devices

Abstract Wide and ultrawide-bandgap (U/WBG) materials have garnered significant attention within the semiconductor device community due to their potential to enhance device performance through their substantial bandgap properties. These exceptional material characteristics can enable more robust and efficient devices, particularly in scenarios involving high power, high frequency, and extreme environmental conditions. Despite the promising outlook, the physics of UWBG materials remains inadequately understood, leading to a notable gap between theoretical predictions and experimental device behavior. To address this knowledge gap and pinpoint areas where further research can have the most significant impact, this review provides an overview of the progress and limitations in U/WBG materials. The review commences by discussing Gallium Nitride, a more mature WBG material that serves as a foundation for establishing fundamental concepts and addressing associated challenges. Subsequently, the focus shifts to the examination of various UWBG materials, including AlGaN/AlN, Diamond, and Ga 2 O 3 . For each of these materials, the review delves into their unique properties, growth methods, and current state-of-the-art devices, with a primary emphasis on their applications in power and radio-frequency electronics.

Materials Science↗

An experimental investigation of helicopter rotor high frequency broadband noise

The paper describes experiments involving a 4.17 foot diameter model rotor operating in a 5 times 7.5 ft open jet wind tunnel enclosed in an anechoic chamber. The effects of rotor thrust, advance ratio, and the number of blades on the intensity and spectrum of high frequency broadband noise (HFBN) have been investigated. The effects of each parameter were determined by keeping the other two constant. The directivities of the two- and three-bladed rotors were measured in a direction perpendicular to the plane of the rotor disk. The effects of heading edge, pressure side, and suction side serrations on HFBN were measured under several operating conditions, and the effects of the serrations on the mean thrust generated by the rotor were studied. A scaling law is proposed to determine the location of the peak frequency and intensity of HFBN.

Lee, A.↗

HIGH-FREQUENCY-PEAKED BL LACERTAE OBJECTS AS SPECTRAL CANDLES TO MEASURE THE EXTRAGALACTIC BACKGROUND LIGHT IN THE FERMI AND AIR CHERENKOV TELESCOPES ERA

The extragalactic background light (EBL) is the integrated light from all the stars that have ever formed, and spans the IR-UV range. The interaction of very high-energy (VHE: E > 100 GeV) {gamma}-rays, emitted by sources located at cosmological distances, with the intervening EBL results in e {sup -} e {sup +} pair production that leads to energy-dependent attenuation of the observed VHE flux. This introduces a fundamental ambiguity into the interpretation of measured VHE {gamma}-ray spectra: neither the intrinsic spectrum nor the EBL are separately known-only their combination is. In this Letter, we propose a method to measure the EBL photon number density. It relies on using simultaneous observations of BL Lac objects in the optical, X-ray, high-energy (HE: E > 100 MeV) {gamma}-ray (from the Fermi telescope), and VHE {gamma}-ray (from Cherenkov telescopes) bands. For each source, the method involves best-fitting the spectral energy distribution from optical through HE {gamma}-rays (the latter being largely unaffected by EBL attenuation as long as z {approx_lt} 1) with a synchrotron self-Compton model. We extrapolate such best-fitting models into the VHE regime and assume they represent the BL Lacs' intrinsic emission. Contrasting measured versus intrinsic emission leads to a determination of the {gamma}{gamma} opacity to VHE photons. Using, for each given source, different states of emission will only improve the accuracy of the proposed method. We demonstrate this method using recent simultaneous multifrequency observations of the high-frequency-peaked BL Lac object PKS 2155-304 and discuss how similar observations can more accurately probe the EBL.

79 ASTRONOMY AND ASTROPHYSICS↗

High frequency drive mechanism for an active controls systems aircraft control surface

The mechanism was successfully utilized on a wind tunnel model tested in the transonic blow down tunnel. The mechanism is also applicable to a flying aircraft. Several interrelated mechanical subsystems were utilized, including a low inertia antibacklash drive mechanism for high frequency oscillation and a compact antibacklash drive mechanism for conversion of rotary motion to linear motion.

Smith, H. E.↗

High Frequency Transverse Instabilities in Low NOx Gas Turbines

This program addresses the topic of combustion instabilities under the goal of developing “Low-NOx Combustion Technology for ‘Air-Breathing’ Advanced Turbines”. With recent advances in high-temperature withstanding materials, the push towards higher efficiency has resulted in efforts to design high temperature, low NOx gas turbines. The development of such low NOx systems is often plagued with combustion instabilities. These instabilities manifest with acoustic modes that are longitudinal, transverse or both. A large body of literature and work exists addressing the underlying mechanisms and models for longitudinal instabilities and these have been successfully implemented in the design tools for low NOx gas turbines. The flame response aspect of the thermoacoustic feedback loop was often modeled in an acoustically compact framework since for low frequencies, the flame length scale was small compared to the acoustic wavelength. This enabled simplification where the modeling focused only on the overall flame response and not the local spatial distribution of the flame response. In addition, additional mechanisms such as the direct effect of pressure fluctuations on the flame response could be neglected. In contrast, high frequency instabilities which often are transverse in nature, have received relatively less attention in the literature. The flame is no longer acoustically compact and thus the local distribution of heat release must be accurately understood. The flame responds to velocity fluctuations, equivalence ratio fluctuations as before, but also to pressure fluctuations through kinetic effects. These aspects of high-frequency instabilities make it a challenging problem that requires a detailed elucidation of the underlying mechanisms and creating models for them. In this program we significantly improved the understanding of these instabilities through a combination of experiments (informed by interactions with OEMs), modeling of measured data and reduced order modeling of flame response. The results from the program can be used as basis for robust design tools that are essential for successfully developing gas turbines that operate in an environmentally acceptable manner with mitigation strategies for high-frequency instabilities.

08 HYDROGEN↗

Realizing one-dimensional quantum and high-frequency transport features in aligned single-walled carbon nanotube ropes

The superiority of the electronic transport properties of single-walled carbon nanotube (SWNT) ropes over SWNT mats is verified from low temperature and frequency-dependent transport. The overall change of resistance versus in nanotube mats shows that 3D variable range hopping is the dominant conduction mechanism within the 2–300 K range. The magneto-resistance (MR) is found to be predominantly negative with a parabolic nature, which can also be described by the hopping model. Although the positive upturn of the MR at low temperatures establishes the contribution from quantum interference, the inherent quantum transport in individual tubes is suppressed at elevated temperatures. Therefore, to minimize multi-channel effects from inter-tube interactions and other defects, two-terminal devices were fabricated from aligned SWNT (extracted from a mat) for low temperature transport as well as high-frequency measurements. In contrast to the mat, the aligned ropes exhibit step-like features in the differential conductance within the 80–300 K temperature range. The effects of plasmon propagation, unique to one dimension, were identified in electronic transport as a non-universal power-law dependence of the differential conductance on temperature and source-drain voltage. The complex impedance showed high power transmission capabilities up to 65 GHz as well as oscillations in the frequency range up to 30 GHz. The measurements suggest that aligned SWNT ropes have a realistic potential for high-speed device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Piezoelectric Shaker Development for High Frequency Calibration of Accelerometers

Calibration of vibration transducers requires sinusoidal motion over a wide frequency range with low distortion and low cross-axial motion. Piezoelectric shakers are well suited to generate such motion and are suitable for use with laser interferometric methods at frequencies of 3 kHz and above. An advantage of piezoelectric shakers is the higher achievable accelerations and displacement amplitudes as compared to electro-dynamic (ED) shakers. Typical commercial ED calibration shakers produce maximum accelerations from 100 m/s{sup 2} to 500 m/s{sup 2}. Very large ED shakers may produce somewhat higher accelerations but require large amplifiers and expensive cooling systems to dissipate heat. Due to the limitations in maximum accelerations by ED shakers at frequencies above 5 kHz, the amplitudes of the generated sinusoidal displacement are frequently below the resolution of laser interferometers used in primary calibration methods. This limits the usefulness of ED shakers in interferometric based calibrations at higher frequencies.Small piezoelectric shakers provide much higher acceleration and displacement amplitudes for frequencies above 5 kHz, making these shakers very useful for accelerometer calibrations employing laser interferometric measurements, as will be shown in this paper. These piezoelectric shakers have been developed and used at NIST for many years for high frequency calibration of accelerometers. This paper documents the construction and performance of a new version of these shakers developed at NIST for the calibration of accelerometers over the range of 3 kHz to 30 kHz and possibly higher. Examples of typical calibration results are also given.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-frequency lunar teleseismic events

A small number of seismic signals, including some of the strongest observed to date, have been identified as representing a fourth principal category of natural lunar seismic events with characteristics distinct from those produced by normal meteoroid impacts, deep moonquakes, and thermal moonquakes. These signals are much richer in high frequencies than other events observed at comparable distances, and display relatively impulsive P- and S-wave beginnings, indicating negligible seismic-wave scattering near the source. Source depths of these events may range between 0 and perhaps 300 km. These and other characteristics could represent either (1) meteoroids impacting upon outcrops of competent lunar crystal rock, (2) rare impacting objects that penetrate to competent rock below a scattering zone, or (3) shallow tectonic moonquakes.

Nakamura, Y.↗

3-D Surface Depression Profiling Using High Frequency Focused Air-Coupled Ultrasonic Pulses

Surface topography is an important variable in the performance of many industrial components and is normally measured with diamond-tip profilometry over a small area or using optical scattering methods for larger area measurement. This article shows quantitative surface topography profiles as obtained using only high-frequency focused air-coupled ultrasonic pulses. The profiles were obtained using a profiling system developed by NASA Glenn Research Center and Sonix, Inc (via a formal cooperative agreement). (The air transducers are available as off-the-shelf items from several companies.) The method is simple and reproducible because it relies mainly on knowledge and constancy of the sound velocity through the air. The air transducer is scanned across the surface and sends pulses to the sample surface where they are reflected back from the surface along the same path as the incident wave. Time-of-flight images of the sample surface are acquired and converted to depth/surface profile images using the simple relation (d = V*t/2) between distance (d), time-of-flight (t), and the velocity of sound in air (V). The system has the ability to resolve surface depression variations as small as 25 microns, is useable over a 1.4 mm vertical depth range, and can profile large areas only limited by the scan limits of the particular ultrasonic system. (Best-case depth resolution is 0.25 microns which may be achievable with improved isolation from vibration and air currents.) The method using an optimized configuration is reasonably rapid and has all quantitative analysis facilities on-line including 2-D and 3-D visualization capability, extreme value filtering (for faulty data), and leveling capability. Air-coupled surface profilometry is applicable to plate-like and curved samples. In this article, results are shown for several proof-of-concept samples, plastic samples burned in microgravity on the STS-54 space shuttle mission, and a partially-coated cylindrical ceramic composite sample. Impressive results were obtained for all samples when compared with diamond-tip profiles and measurements from micrometers. The method is completely nondestructive, noninvasive, non-contact and does not require light-reflective surfaces.

Roth, Don J.↗

Active Control of High-Frequency Combustor Instability Demonstrated

To reduce the environmental impact of aerospace propulsion systems, extensive research is being done in the development of lean-burning (low fuel-to-air ratio) combustors that can reduce emissions throughout the mission cycle. However, these lean-burning combustors have an increased susceptibility to thermoacoustic instabilities-high-pressure oscillations much like sound waves that can cause severe high-frequency vibrations in the combustor. These pressure waves can fatigue the combustor components and even the downstream turbine blades. This can significantly decrease the combustor and turbine safe operating life. Thus, suppression of the thermoacoustic combustor instabilities is an enabling technology for lean, low-emissions combustors. Under the Propulsion and Power Program, the NASA Glenn Research Center in partnership with Pratt & Whitney, United Technologies Research Center, and Georgia Institute of Technology is developing technologies for the active control of combustion instabilities.

DeLaat, John C.↗

Development of high frequency low weight power magnetics for aerospace power systems

A dominant design consideration in the development of space type power mangetic devices is the application of reliable thermal control methods to prevent device failure which is due to excessive temperature rises and hot temperatures in critical areas. The resultant design must also yield low weight, high efficiency, high reliability and maintainability, and long life. The weight savings and high efficiency that results by going to high frequency and unique thermal control techniques is demonstrated by the development of a 25 kVA, 20 kHz space type transformer under the power magnetics technology program. Work in the area of power rotary transformer is also discussed.

Schwarze, G. E.↗