Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

The effect of solid phase reactions on the ballistic properties of propellants

The combustion of NHClO4 composite propellants was studied between 15 and 3000 psi. The emphasis was on determining the mechanisms by which the fuel components influence the burning rate of the composites. All combustion experiments were performed with pressed powder strands. The fuels affected the combustion mechanism of the composite through their effect on the oxidizer decomposition mechanism, the composite surface temperature, and by reacting heterogeneously with the oxidizer on the surface of the composite. The results indicate that the fuel component has a significant effect on the surface temperature in both catalyzed and uncatalyzed composites. The data suggest that the contribution, to the overall combustion reaction, of heterogeneous reactions increases with increasing pressure. There is also evidence that even in steady state combustion the ignition of individual oxidizer particles is an important parameter in determining the combustion characteristics of the composite.

Schmidt, W. G.↗

Orbital positioning of domestic satellites

An important factor in establishing domestic or regional communication satellite systems which share a given frequency band is the positioning of the satellites in the arc of the geostationary orbit that is visible to the area to be served. A description is given of the results of orbit spacing studies performed with respect to the eight different space systems proposed to provide U.S. domestic communication services. Some tentative guidelines which may be of general use are proposed. Four sets of computer models were studied, taking into account quasi-homogeneous models, a five-system model, a heterogeneous model with 3-degree spacings, and a heterogeneous model with unequal spacings and with coordination.

Gubin, S.↗

Igneous rocks from Apollo 16 rake samples

Results are reported for a study of seven holocrystalline feldspathic rocks (including a spinel troctolite and six melt rocks) and one mare basalt clast from the Apollo-16 rake samples. The composition and grain structure of each rock is described in detail. Only the spinel troctolite is considered a good candidate for a primary igneous cumulate formed during the original differentiation of the lunar crust. It is shown that the melt rocks probably resulted from shock melting followed by rapid crystallization of heterogeneous highland material and that compositional variations are probably due to mixing of various amounts of heterogeneous cumulates and KREEP components. It is suggested that the mare basalt clast may have been derived from Mare Fecunditatis, although the nearest mare to the Apollo-16 site is Nectaris.

Dowty, E.↗

Thermal histories and crystal distributions in partly devitrified lunar glasses cooled by radiation

Calculations of the expected crystallization behavior of selected lunar compositions (60095 and 14259) are presented. Knowledge of this behavior combined with measurements of the state of crystallinity in partially devitrified lunar samples permits the determination of the thermal history of the samples. The state of crystallinity of a specimen is described by a statistical crystal distribution function psi. The heat flow problems of a plate of opaque glass quenched on an aluminum block and of a semi-transparent glass sphere cooling by radiation are analyzed. The results are combined with laboratory measurements of the crystal growth velocity and the viscosity, and with theoretical expressions for the nucleation frequency (homogeneous and heterogeneous) to obtain psi. It is found that the calculated psi is much too large in comparison with laboratory experiments on lunar samples. Possible reasons for the discrepancy are discussed, and the most likely cause is that the assumed nucleation barrier is too small. It also appears likely that these materials have relatively few nucleating heterogeneities.

Hopper, R. W.↗

Germanium-silicon solid solutions

An experiment on melting and directional crystallization of an antimony (Sb) doped germanium silicon (GeSi) solid solution was designed for the Apollo-Soyuz Test Project (ASTP) to study the possibility of using zero-g conditions for obtaining solid-solution monocrystals with uniformly distributed components. Crystallization in the zero-g environment did not occur under ideal stationary growth and segregation conditions. Crystallization under zero-g conditions revealed the heterogeneous nature of Si and Sb distribution in the cross sections of crystals. The presence of the radial thermal gradient in the multipurpose furnace could be one of the reasons for such Si and Sb distribution. The structure of space-grown crystals correlates with the nature of heterogeneities of Si and Sb distribution in crystals. The type of surface morphology and the contour observed in space-grown crystals were never observed in ground-based crystals and indicate the absence of wetting of the graphitized walls of the ampoule by the melt during melting and crystallization.

Zemskov, V. S.↗

Tidal stresses in the moon

The tidal stresses in a radially heterogeneous moon are calculated numerically as a function of time and location by using the latest moon model obtained from seismic data. Theoretical results are compared with the observed features of deep moonquakes and in particular with those of the most active A sub 1 hypocenter. The results show that (1) the magnitudes of tidal stresses are small, of the order of 1 bar and less, (2) they reach maxima in the seismically active depth range of 600-1200 km, (3) the geographic distribution of moonquake epicenters does not appear to be controlled solely by the highest tidal stresses, and the presence of heterogeneities and weak zones may be important in determining moonquake locations, (4) the occurrence times of moonquakes correlate with one or more of the tidal stress components, and (5) the presence of an ambient tectonic stress of about the same order of magnitude as the tidal stress is necessary to explain the observed reversal in polarity of the A sub 1 moonquakes.

Cheng, C. H.↗

The vertical distribution of tropospheric ammonia

A one-dimensional tropospheric photochemical model is used to simulate measured profiles of NH3 obtained with the Infrared Heterodyne Radiometer. The relative roles of homogeneous loss, heterogeneous loss, and vertical eddy transport are discussed in terms of selecting parameters which best fit the measurements. The best fit was obtained for a vertical eddy diffusion coefficient of 200,000/sq cm per sec or greater (corresponding to a characteristic vertical transport time in excess of about 35 days), and a characteristic heterogeneous loss time in excess of 10 days. The characteristic homogeneous chemical loss time was found to be about 40 days at the surface and decreased to about 180 days at 10 km, and not very sensitive to model chemical perturbations. Increased ground-level concentrations of NH3 to about 10 ppb, compared to background surface concentrations of about 1 ppb, were measured several weeks after application of ammonium nitrate fertilizer. This suggests that the volatilization of ammonium nitrate fertilizer is rapid, and an important source of NH3. Because of the characteristic times for the loss mechanisms, synoptic time-scale phenomena may play an important role in determining the tropospheric distribution of NH3 concentrations.

Levine, J. S.↗

Real gas effects 2: Influence of condensation on minimum operating temperatures of cryogenic wind tunnels

Condensation effects are responsible for the minimum operating temperatures of cryogenic wind tunnels at total pressures up to about 9 atmospheres. The two primary modes of condensation homogeneous nucleation and heterogeneous nucleation and the conditions with which either may limit minimum operating temperatures are reveiwed. Previous hypersonic and supersonic condensation data are reviewed as are data taken in the nitrogen gas, Langley 0.3 Meter Transonic Cryogenic Tunnel. Analysis of data in the 0.3 m tunnel suggests that the onset of homogenous nucleation may be approximated by an analysis by sivier and that the onset of heterogeneous nucleation is only apparent just below free stream saturation. Extension of the results from the 0.3 m tunnel to other nitrogen gas cryogenic tunnels is discussed and is shown to depend on length scales, purity of the liquid nitrogen injected for cooling, number of particulates in the flow, and the extent to which the injected liquid nitrogen is evaporated.

Hall, R. M.↗

Effects of AP size distribution on the pressure-coupled response function

Progress in theoretical and experimental research to determine effects of AP size distribution on the pressure-coupled response function is presented. The theoretical model was based upon a preferred frequency mechanism in which ordered fluctuations in the propellant formulation, dependent upon the heterogeneity, contributed to the response. Experiments to charaterize and relate the heterogeneity to response function behavior consisted of scanning electron microscope studies and measurements of dynamic burning at constant pressure. The concept, differences between ideal models and real propellants, and results thus far obtained are discussed.

Cohen, N. S.↗

Use and applicability of the vegetation component of the national site classification system

Existing vegetation on a site in Sumter National Forest, South Carolina was classified using high altitude aerial optical bar color infrared photography in an effort to determine if the National Site Classification (NSC) system could be used in the heterogeneously forested southeastern United States where it had not previously been used. Results show that the revised UNESCO international classification and mapping of vegetation system, as incorporated into the NSCS, is general enough at the higher levels and specific enough at the lower levels to adequately accommodate densely forested, heterogeneous areas as well as the larger, more homogeneous regions of the Pacific Northwest. The major problem is of existing vegetation versus natural vegetation.

Clark, C. A.↗

Crystal nucleation in glass-forming alloy and pure metal melts under containerless and vibrationless conditions

The undercooling behavior of large spheroids of Pd40Ni40P40 was investigated. By surface etching, supporting the specimens on a fused silica substrate, and successive heating and cooling, crystallization can be eliminated, presumable due to the removal of surface heterogeneities. By this method samples up to 3.2g with a 0.53 mm minor diameter, were made entirely glassy, except for some superficial crystals comprising less than 0.5% of the volume. These experiments show that a cooling rate of approximately 1 K/sec is adequate to avoid copious homogeneous nucleation in the alloy, and that by eliminating or reducing the effectiveness of heterogeneous nucleation sites, it is possible to form bulk samples of this metallic glass with virtually unlimited dimensions.

Spaepen, F.↗

Computed tomographic analysis of meteorite inclusions

The feasibility of obtaining nondestructively a cross-sectional display of very dense heterogeneous rocky specimens, whether lunar, terrestrial or meteoritic, by using a fourth generation computed tomographic (CT) scanner, with modifications to the software only, is discussed. A description of the scanner, and of the experimental and analytical procedures is given. Using this technique, the interior of heterogeneous materials such as Allende can be probed nondestructively. The regions of material with high and low atomic numbers are displayed quickly; the object can then be cut to obtain for analysis just the areas of interest. A comparison of this technique with conventional industrial and medical techniques is made in terms of image resolution and density distribution display precision.

Arnold, J. R.↗

Spatial variability of soil hydraulics and remotely sensed soil parameters

The development of methods to correctly interpret remotely sensed information about soil moisture and soil temperature requires an understanding of water and energy flow in soil, because the signals originate from the surface, or from a shallow surface layer, but reflect processes in the entire profile. One formidable difficulty in this application of soil physics is the spatial heterogeneity of natural soils. Earlier work has suggested that the heterogeneity of soil hydraulic properties may be described by the frequency distribution of a single scale factor. The sensitivity of hydraulic and energetic processes to the variation of this scale factor is explored with a suitable numerical model. It is believed that such an analysis can help in deciding how accurately and extensively basic physical properties of field soils need to be known in order to interpret thermal or radar waveband signals. It appears that the saturated hydraulic conductivity needs to be known only to its order of magnitude, and that the required accuracy of the soil water retention function is about 0.02 volume fraction. Furthermore, the results may be helpful in deciding how the total scene or view field, as perceived through a sensor, is composed from the actual mosaic of transient soil properties, such as surface temperature or surface soil moisture. However, the latter proposition presupposes a random distribution of permanent properties, a condition that may not be met in many instances, and no solution of the problem is apparent.

Lascano, R. J.↗

The kinematics and structure of N49

The present investigation of N49, which is located in the Large Magellanic Cloud (LMC), makes use of an analysis of optical emission-line profiles. Echelle spectrograph observations indicate the large-scale kinematic and structural properties of N49. It is found that this supernova remnant (SNR) is evolving in a clumpy interstellar medium (ISM), probably as many other remnants are. The very high resolution spectra of this remnant show three kinds of spectral feature, called broad bands, narrow bands, and spikes. It is shown that N49 can be regarded as the product of a supernova explosion in a heterogeneous interstellar medium. The heterogeneity is indicated in low-speed and high-speed systems of shocked material in N49.

Shull, P., Jr.↗

Kinetics of crystal nucleation and growth in Pd(40)Ni(40)P(20) glass

Samples of Pd(40)Ni(40)P(20) glass, produced by cooling the melt at 1 or 800 K/s, are heated in a differential scanning calorimeter to determine the crystallization kinetics. Optical microscopy shows that eutectic crystallization proceeds both by growth from the surface of the samples and by the growth of spherical regions around preexisting nuclei in the interior. A modified Kissinger (1957) analysis is used to obtain the activation energy for crystal growth (3.49 eV). The steady state homogeneous nucleation frequency at 590 K is about 10 million/cu m per sec. This is estimated to be the maximum nucleation frequency: it is too low to account for the observed population of quenched-in nuclei, which are therefore presumed to be heterogeneous. The major practical obstacle to glass formation in this system is heterogeneous nucleation.

Drehman, A. J.↗

The Skylab lunar multispectral scanner data

Skylab S-192 multispectral scanner data, in 12 bands covering wavelengths from 0.41 to 2.3 microns, have been investigated to identify and classify geologic units of the lunar surface. Seventeen spectral cluster classes have been identified, seven in the highlands, seven in the maria, and three of which occur in both or in border regions. This finding may be roughly indicative of the relative heterogeneity of these regions. It implies that there is as much heterogeneity in the highlands as in the maria. This work extends the spectral and aerial coverage of similar studies of the lunar surface and provides useful data for comparison for most of the lunar near side.

Seeger, C. R.↗

Containerless drop tube solidification and grain refinement of NiAl3

The possibility of undercooling Ni-Al alloys below the liquidus in order to produce a single phase peritectic structure by containerless drop tube solidification was studied. Containerless process is a technique for both high purity contamination free studies as well as for investigating the undercooling and rapid solidification of alloys by suppression of heterogeneous nucleation on container walls. In order to achieve large undercoolings one must avoid heterogeneous nucleation of crystallization. It was shown that the Marshall Space Flight Center drop tubes ae unique facilities for containerless solidification experiments and large undercoolings are possible with some alloys. The original goal of undercooling the liquid metal well below the liquidus to the peritectic temperature during containerless free to form primarily NiAl3 was achieved. The microstructures were interesting from another point of view. The microstructure from small diameter samples is greatly refined. Small dendrite arm spacings such as these could greatly facilitate the annealing and solid state transformation of the alloy to nearly 10% NiAl3 by reducing the distance over which diffusion needs to occur. This could minimize annealing time and might make it economically feasible to produce NiAl3 alloy.

Ethridge, E. C.↗