Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Germanium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Comment on “Diffusion of n-type dopants in germanium” [Appl. Phys. Rev. 1, 011301 (2014)]

The authors of the above paper call into question recent evidence on the properties of self-interstitials, I, in Ge [Cowern et al., Phys. Rev. Lett. 110, 155501 (2013)]. We show that this judgment stems from invalid model assumptions during analysis of data on B marker-layer diffusion during proton irradiation, and that a corrected analysis fully supports the reported evidence. As previously stated, I-mediated self-diffusion in Ge exhibits two distinct regimes of temperature, T: high-T, dominated by amorphous-like mono-interstitial clusters—i-morphs—with self-diffusion entropy ≈30 k, and low-T, where transport is dominated by simple self-interstitials. In a transitional range centered on 475 °C both mechanisms contribute. The experimental I migration energy of 1.84 ± 0.26 eV reported by the Münster group based on measurements of self-diffusion during irradiation at 550 °C < T < 680 °C further establishes our proposed i-morph mechanism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phosphorus and carrier density of heavily n-type doped germanium

The threshold current density of n-type, tensile-strained Ge lasers strongly depends on the electron density. Although optical net gain analyses indicate that the optimum electron density should be on the order of 1 × 10{sup 20} cm{sup −3} to get the lowest threshold, it is not a simple task to increase the electron density beyond the mid range of 10{sup 19} cm{sup −3}. The present paper analyzes the phenomenon where electron density is not proportional to phosphorus donor density, i.e., “saturation” phenomenon, by applying the so-called amphoteric defect model. The analyses indicate that the saturation phenomenon can be well explained by the charge compensation between the phosphorus donors (P{sup +}) and doubly negative charged Ge vacancies (V{sup 2−}).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural transition in sputter-deposited amorphous germanium films by aging at ambient temperature

The structure of amorphous Ge (a-Ge) films prepared by sputter-deposition and the effects of aging at ambient temperature and pressure were studied by pair-distribution-function (PDF) analysis from electron scattering and molecular dynamics simulations. The PDFs of the as-deposited and aged samples for 3–13 months showed that the major peaks for Ge-Ge bonds decrease in intensity and broaden with aging for up to 7 months. In the PDFs of a-Ge of molecular dynamics simulation obtained by quenching liquid at different rates, the major peak intensities of a slowly cooled model are higher than those of a rapidly cooled model. Analyses on short- and medium-range configurations show that the slowly cooled model includes a certain amount of medium-range ordered (MRO) clusters, while the rapidly cooled model includes liquid-like configurations rather than MRO clusters. The similarity between experimental and computational PDFs implies that as-deposited films are similar in structure to the slowly cooled model, whereas the fully aged films are similar to the rapidly cooled model. It is assumed that as they undergo room-temperature aging, the MRO clusters disintegrate and transform into liquid-like regions in the same matrix. This transition in local configurations is discussed in terms of instability and the non-equilibrium of nanoclusters produced by a vapor-deposition process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flexible nanomembrane photonic-crystal cavities for tensilely strained-germanium light emission

Flexible photonic-crystal cavities in the form of Si-column arrays embedded in polymeric films are developed on Ge nanomembranes using direct membrane assembly. The resulting devices can sustain large biaxial tensile strain under mechanical stress, as a way to enhance the Ge radiative efficiency. Pronounced emission peaks associated with photonic-crystal cavity resonances are observed in photoluminescence measurements. These results show that ultrathin nanomembrane active layers can be effectively coupled to an optical cavity, while still preserving their mechanical flexibility. Thus, they are promising for the development of strain-enabled Ge lasers, and more generally uniquely flexible optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band structure of germanium carbides for direct bandgap silicon photonics

Compact optical interconnects require efficient lasers and modulators compatible with silicon. Ab initio modeling of Ge{sub 1−x}C{sub x} (x = 0.78%) using density functional theory with HSE06 hybrid functionals predicts a splitting of the conduction band at Γ and a strongly direct bandgap, consistent with band anticrossing. Photoreflectance of Ge{sub 0.998}C{sub 0.002} shows a bandgap reduction supporting these results. Growth of Ge{sub 0.998}C{sub 0.002} using tetrakis(germyl)methane as the C source shows no signs of C-C bonds, C clusters, or extended defects, suggesting highly substitutional incorporation of C. Optical gain and modulation are predicted to rival III–V materials due to a larger electron population in the direct valley, reduced intervalley scattering, suppressed Auger recombination, and increased overlap integral for a stronger fundamental optical transition.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flexible germanium nanomembrane metal-semiconductor-metal photodiodes

We demonstrate flexible Ge nanomembrane (Ge NM) based metal-semiconductor-metal photodiodes. The effect of uniaxial tensile strain on Ge NM based photodiodes was investigated using bending fixtures. Dark current density is decreased from 21.5 to 4.8 mA/cm{sup 2} at 3 V by a tensile strain of 0.42% while photon responsivity is increased from 0.2 to 0.45 A/W at the wavelength of 1.5 μm. Enhanced responsivity is also observed at longer wavelengths up to 1.64 μm. The uniaxial tensile strain effectively reduces the direct bandgap energy of the Ge NM, leading to a shift of the absorption edge toward a longer wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gallium interstitial in irradiated germanium: Deep level transient spectroscopy

Two electronic levels at 0.34 eV above the valence band and 0.32 eV below the conduction band, in gallium doped, p-type Ge irradiated with 2 MeV electrons have been studied by deep level transient spectroscopy (DLTS) with both majority- and minority-carrier injections, and Laplace DLTS spectroscopy. It is concluded that these levels, having donor and acceptor characters, respectively, are correlated with interstitial Ga atoms, formed by the Watkins-replacement mechanism via self-interstitials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and Magnetic Properties of Mn-doped Germanium near the Kinetic Solubility Limit

Growth of high-quality dilute magnetic semiconductor (DMS) material is often compromised by the low solubility of magnetic dopants, leading to formation of precipitates. Here, we explore the feasibility of growing precipitate-free Mn-doped Ge at doping levels near the kinetic solubility limit. Ge:Mn DMS films were grown at low temperature so as to minimize precipitate formation. Meanwhile, epitaxial quality was maintained by employing a very low growth rate. The magnetic properties of these lightly doped films exhibit both interesting contrasts and similarities with those of heavily-doped DMS reported in the literature, indicating that the substitutional Mn contents are very similar. Films grown at 95 degree C are free of intermetallic precipitates, offering useful opportunities for studying the fundamentals of carrier mediated exchange and metal insulator transitions without complications arising from precipitate formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improving Performance of III-V Solar Cells Grown on Spalled Germanium with Ex Situ Substrate Planarization

Controlled spalling allows removal of devices and provides an opportunity for cost reduction through substrate reuse. However, the fracture-based process can leave behind morphological surface features, notably river lines, that can disrupt epitaxial growth and degrade device performance. We investigate the viability of various wet etch chemistries to planarize river lines to ensure high-quality device growth and performance without mechanical repolishing, and so maintain a route towards cost-effective reuse. Etching in a HF: HNO 3 :CH 3 COOH solution effectively planarizes river lines and produces a surface that yields devices with equivalent performance to those grown on epi-ready Ge wafer surfaces. Further studies will focus on optimizing etch composition, temperature, and time to minimize material removal while maintaining a suitable surface for high-quality epitaxy.

germanium↗

Epitaxial growth of germanium on silicon using a Gd{sub 2}O{sub 3}/Si (111) crystalline template

This work presents a study of the epitaxial growth of Ge on Si (111) using a Gd{sub 2}O{sub 3} crystalline template. A smooth two-dimensional Ge layers is obtained from the coalescence of initially three-dimensional Ge islands grown in the Volmer-Weber mode. Ge takes its bulk lattice parameter at the very early stages of its growth. A detailed x-ray pole figure analysis reveals that the epitaxial relationship between the layers and the Si substrate is [1-10]Ge(111)||-110]Gd{sub 2}O{sub 3}(111)||[1-10]Si(111) and that microtwins are formed in the Ge layer.

36 MATERIALS SCIENCE↗

Nanoscale topographic pattern formation on Kr{sup +}-bombarded germanium surfaces

The nanoscale pattern formation of Ge surfaces uniformly irradiated by Kr{sup +} ions was studied in a low-contamination environment at ion energies of 250 and 500 eV and at angles of 0 Degree-Sign through 80 Degree-Sign . The authors present a phase diagram of domains of pattern formation occurring as these two control parameters are varied. The results are insensitive to ion energy over the range covered by the experiments. Flat surfaces are stable from normal incidence up to an incidence angle of {theta} = 55 Degree-Sign from normal. At higher angles, the surface is linearly unstable to the formation of parallel-mode ripples, in which the wave vector is parallel to the projection of the ion beam on the surface. For {theta} {>=} 75 Degree-Sign the authors observe perpendicular-mode ripples, in which the wave vector is perpendicular to the ion beam. This behavior is qualitatively similar to those of Madi et al. for Ar{sup +}-irradiated Si but is inconsistent with those of Ziberi et al. for Kr{sup +}-irradiated Ge. The existence of a window of stability is qualitatively inconsistent with a theory based on sputter erosion [R. M. Bradley and J. M. Harper, J. Vac. Sci. Technol. A 6, 2390 (1988)] and qualitatively consistent with a model of ion impact-induced mass redistribution [G. Carter and V. Vishnyakov, Phys. Rev. B 54, 17647 (1996)] as well as a crater function theory incorporating both effects [S. A. Norris et al., Nat. Commun. 2, 276 (2011)]. The critical transition angle between stable and rippled surfaces occurs 10 Degree-Sign -15 Degree-Sign above the value of 45 Degree-Sign predicted by the mass redistribution model.

36 MATERIALS SCIENCE↗

Synthesis and the crystal and molecular structure of the silver(I)–germanium(IV) polymeric complex with citrate anions ([Ag{sub 2}Ge(HCit){sub 2}(H{sub 2}O){sub 2}] ∙ 2H{sub 2}O){sub n}

The synthesis and X-ray diffraction study of compound ([Ag{sub 2}Ge(HCit){sub 2}(H{sub 2}O){sub 2}] ∙ 2H{sub 2}O){sub n}, where H{sub 4}Cit is the citric acid, are performed. In the polymeric structure, the HCit{sup 3–} ligand fulfils the tetradentate chelate–μ{sub 4}-bridging (3Ag, Ge) function (tridentate with respect to Ge and Ag atoms). The Ge atom is octahedrally coordinated by six O atoms of two HCit{sup 3–}ligands. The coordination polyhedron of the Ag atom is an irregular five-vertex polyhedron [four O atoms of four HCit{sup 3–} ligands and the O(H{sub 2}O) atom]. An extended system of O–H···O hydrogen bonds connects complex molecules into a supramolecular 3D-framework.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exciton states and photoluminescence of silicon and germanium nanocrystals in an Al{sub 2}O{sub 3} matrix

This paper deals with the theoretical and experimental study of radiative processes in zero-dimensional Si and Ge nanostructures consisting of a system of Si or Ge nanocrystals embedded in an Al{sub 2}O{sub 3} matrix. The Al{sub 2}O{sub 3} films containing Si or Ge quantum dots were produced by pulsed laser-assisted deposition. The timeresolved photoluminescence spectra of the films were recorded in the energy range from 1.4 to 3.2 eV in the range of photoluminescence relaxation times between 50 ns and 20 {mu}s. The exciton binding energy and the energy of radiative excitonic transitions are calculated, taking into account the finite barrier height and the polarization of heterointerfaces. In addition, the excitonic photoluminescence spectra are calculated, taking into account the effect of quantum mesoscopic fluctuations and the possible nonmonotonically varying dependence of the radiative zero-phonon lifetime of excitons on the dimensions of the quantum dots. The observed agreement between the calculated and recorded photoluminescence spectra confirms the excitonic nature of photoluminescence and provides a means for the determination of the model parameters of photoluminescence in the nanostructures.

36 MATERIALS SCIENCE↗

Electronic structure of Zn-substituted germanium clathrates

The result of the calculations of the electronic structure for Ba{sub 8}Zn{sub x}Ge{sub 46-x} (x = 4, 6, 8) clathrates are presented. Band structures, total and partial electron densities of states in clathrates were obtained. The effect of the number of substituted atoms on the electron energy spectrum was considered. The linearized augmented plane wave method was used in the calculations.

36 MATERIALS SCIENCE↗

Germanium subcells for multijunction GaInP/GaInAs/Ge solar cells

Photovoltaic converters based on n-GaInP/n-p-Ge heterostructures grown by the OMVPE under different conditions of formation of the p-n junction are studied. The heterostructures are intended for use as narrow-gap subcells of the GaInP/GaInAs/Ge three-junction solar cells. It is shown that, in Ge p-tn junctions, along with the diffusion mechanism, the tunneling mechanism of the current flow exists; therefore, the two-diode electrical equivalent circuit of the Ge p-n junction is used. The diode parameters are determined for both mechanisms from the analysis of both dark and 'light' current-voltage dependences. It is shown that the elimination of the component of the tunneling current allows one to increase the efficiency of the Ge subcell by {approx}1% with conversion of nonconcentrated solar radiation. The influence of the tunneling current on the efficiency of the Ge-based devices can be in practice reduced to zero at photogenerated current density of {approx}1.5 A/cm{sup 2} due to the use of the concentrated solar radiation.

36 MATERIALS SCIENCE↗

Implantation of sodium ions into germanium

The donor properties of Na atoms introduced by ion implantation into p-Ge with the resistivity 20-40 {Omega} cm are established for the first time. Na profiles implanted into Ge (the energies 70 and 77 keV and the doses (0.8, 3, 30) Multiplication-Sign 10{sup 14} cm{sup -2}) are studied. The doses and annealing temperatures at which the thermoprobe detects n-type conductivity on the sample surface are established. After implantation, the profiles exhibit an extended tail. The depth of the concentration maximum is in good agreement with the calculated mean projected range of Na ions R{sub p}. Annealing for 30 min at temperatures of 250-700 Degree-Sign C brings about a redistribution of Na atoms with the formation of segregation peaks at a depth, which is dependent on the ion dose, and is accompanied by the diffusion of Na atoms to the surface with subsequent evaporation. After annealing at 700 Degree-Sign C less than 7% of the implanted ions remain in the matrix. The shape of the profile tail portions measured after annealing at temperatures 300-400 Degree-Sign C is indicative of the diffusion of a small fraction of Na atoms into the depth of the sample.

36 MATERIALS SCIENCE↗