Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Design of an Ultra-Efficient GaN High Power Amplifier for Radar Front-Ends Using Active Harmonic Load-Pull

This work presents a new measurement technique, mixed-signal active harmonic load-pull (MSALP) developed by Anterverta-mw in partnership with Maury Microwave, that allows for wide-band ultra-high efficiency amplifiers to be designed using GaN technology. An overview of the theory behind active load-pull is presented and why load-pull is important for high-power device characterization. In addition, an example procedure is presented that outlines a methodology for amplifier design using this measurement system. Lastly, measured results of a 10W GaN amplifier are presented. This work aims to highlight the benefit of using this sophisticated measurement systems for to optimize amplifier design for real radar waveforms that in turn will simplify implementation of space-based radar systems

Active Load-pull↗

Multiband Reconfigurable Harmonically Tuned Gallium Nitride (GaN) Solid-State Power Amplifier (SSPA) for Cognitive Radios

The paper presents the architecture of a wideband reconfigurable harmonically-tuned Gallium Nitride (GaN) Solid State Power Amplifier (SSPA) for cognitive radios. When interfaced with the physical layer of a cognitive communication system, this amplifier topology offers broadband high efficiency through the use of multiple tuned input/output matching networks. This feature enables the cognitive radio to reconfigure the operating frequency without sacrificing efficiency. This paper additionally presents as a proof-of-concept the design, fabrication, and test results for a GaN inverse Class-F type amplifier operating at X-band (8.4 GHz) that achieves a maximum output power of 5.14-W, Power Added Efficiency (PAE) of 38.6 percent, and Drain Efficiency (DE) of 48.9 percent under continuous wave (CW) operation.

Cognitive↗

Radoptic Effect in InP and GaN for Ultrafast Scintillator Applications

Ultrafast scintillators are the subject of current research in an effort to better resolve ultrafast phenomena in high-energy density physics (HEDP) experiments. Despite extensive research on new scintillator materials, the essential mechanism of energy absorption, excitation, and photo-emission has remained unchanged for over 50 years. Recently, a new class of semiconductor detector has been developed using the radoptic effect, or the change of refractive index when subjected to radiation, in an attempt to record events faster than conventional scintillators.1 This study was designed for the observation of the radoptic effect by optical interferometry in different semiconductors (InP, InP:S, GaN, and GaN:Mg) to experimentally determine the fastest and most sensitive materials for the optimization of current radsensors.

InP, GaN, radoptic, scintillator, ultrafast↗

Highly-scalable, physics-informed GANs for learning solutions of stochastic PDEs

Uncertainty quantification for forward and inverse problems is a central challenge across physical and biomedical disciplines. We address this challenge for the problem of modeling subsurface flow at the Hanford Site by combining stochastic computational models with observational data using physics-informed GAN models. The geographic extent, spatial heterogeneity, and multiple correlation length scales of the Hanford Site require training a computationally intensive GAN model to thousands of dimensions. We develop a highly optimized implementation that scales to {\herogpucount} NVIDIA Volta GPUs. We develop a hierarchical scheme based on a multi-player game-theoretic approach for exploiting domain parallelism, map discriminators and generators to multiple GPUs, and employ efficient communication schemes to ensure training stability and convergence. Our implementation scales to {\heronodecount} nodes on the Summit supercomputer with a \weakscalingeff\% scaling efficiency, achieving peak and sustained half-precision rates of {\heropeakperf} PF/s and {\herosustainedperf} PF/s.

physics informed ML, machine learning, generative ↗

Using GANs to predict milling stability from limited data

Milling is a key manufacturing process that requires the selection of operating parameters that provide efficient performance. However, the presence of chatter, a self-excited vibration causing poor surface finish and potential damage to the machine and cutting tool, makes it challenging to select the appropriate parameters. To predict chatter, stability maps are commonly used, but their generation requires expensive data, making it difficult to employ these maps in industry. Therefore, there is a pressing need for an approach that can accurately predict stability maps using limited experimental data. This study introduces the new Encoder GAN (EGAN) approach based on Generative Adversarial Networks (GANs) that predicts stability maps using limited experimental data. The approach consists of the encoder, generator, and discriminator subnetworks and uses the trained encoder and generator to predict the target stability map. This versatile method can be applied to various tool setups and can accurately predict stability maps with limited experimental data (five to 10 cutting tests) even when there is little information available for unknown parameters. In conclusion, the study evaluates the proposed approach using both numerical data and experiments and demonstrates its superior performance compared to state-of-the-art benchmarks.

42 ENGINEERING↗

Effect of Intrinsic Defects on Electronic and Magnetic Properties in Tm-Doped GaN: First-Principles Calculations

Based on the density functional theory, we investigate the electronic and magnetic properties of various types of defect complexes formed by dopant Tm and Ga vacancies, N vacancies, or O interstitial in Tm-doped GaN. Formation energies are first calculated for all defect complexes to assess their stability. The single Tm dopant is found to introduce the local magnetic moment of about 2 μ{sub B}/Tm in GaN. However, in the case of defect complexes, the magnetic moments of Tm can be suppressed by the existence of Ga vacancies around it, while the presence of N vacancies or O interstitial does not influence the magnetic moment of Tm. In addition, each Ga vacancy in the neutral charge state induces the local magnetic moment of about 2.1 μ{sub B} and one octahedral O interstitial can lead to the local moment of about 1.6 μ{sub B}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Research on photoelectric properties of n-GaN (0001) surface with point defects via first-principles

In order to reveal the influence of n-type doping and point defects on the electronic and optical properties of GaN (0001) surface, the pristine and defective n-GaN (0001) surface models are established. The formation energy, work function, atomic structure, electronic and optical properties of these surfaces are discussed by first-principles calculations. The results show that the defects have the strong tendency to be close to the surface position, and the N interstitial defect (N{sub i}) and the Ga vacancy (V{sub Ga}) are easily formed. The work function of the surface with V{sub Ga} drops the greatest, and the conductivity of n-type increases. In addition, the absorption coefficient of the surface with various defects is smaller than that of the pristine n-type surface. The appropriate amount of Ga vacancies can increase the probability of electron emission, but it is not conducive to the absorption of photons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Inverse design of two-dimensional graphene/h-BN hybrids by a regressional and conditional GAN

Design of materials with desired properties is currently laborious and heavily relies on intuition of researchers through a trial-and-error process. To tackle this challenge, in this work we propose a novel regressional and conditional generative adversarial network (RCGAN) for inverse design of representative two-dimensional materials, the graphene and boron-nitride (BN) hybrids. RCGAN incorporates a supervised regressor network, thus overcoming the common technical barrier in the traditional unsupervised GANs, which cannot generate data when fed with continuous and quantitative labels. RCGAN can autonomously generate graphene/BN hybrids given any target bandgap values. These structures are distinguished from the ones used for training and exhibit high diversity for a given bandgap. Moreover, they exhibit high fidelity, yielding bandgaps within ~10% MAE F of the desired bandgaps as validated by density functional theory (DFT) calculations. Analysis by the principle component analysis (PCA) and modified locally linear embedding (MLLE) reveals that the generator has successfully generated structures following the statistical distribution of the real structures. It implies the possibility of the RCGAN in recognizing physical rules hidden in the high-dimensional data. The novel strategy for designing regressional GAN architecture together with the successful application to inverse design of materials would inspire further exploration in research fields beyond materials.

36 MATERIALS SCIENCE↗

An Optimal Density Functional Theory Method for GaN and ZnO

We report an optimal DFT method (bBLYP) for studying the GaN and ZnO systems. It is developed by modifying the exchange functional in the hybrid BLYP method in order to overcome the flaw of traditional DFT that often predict a rather small band gap for those semiconductors. Results show that the bBLYP method can describe not only correct band gaps of both GaN and ZnO wurtzite crystals, but also accurate properties of relevant small molecules. The application study of crystal-cut nanoparticles and nanowires reveals a new mechanism for band gap narrowing in GaN/ZnO.

74 ATOMIC AND MOLECULAR PHYSICS↗

Multi-agent voltage control in distribution systems using GAN-DRL-based approach

Active distribution grids can experience voltage fluctuations and violations due to the high penetration of variable distributed energy resources (DERs). These problems might occur because of the uncertain and variable generation natures of these resources, especially solar photovoltaic resources, during panel shadowing scenarios. Volt-VAR control (VVC) is an efficient method that controls the reactive power set-points of the inverters to regulate the voltage of distribution grids. Although several VVC approaches have been proposed recently, the performance of these approaches degrades significantly if behind-the-meter solar generation data are unobservable/missing. Therefore, it is necessary to impute missing/unobservable PV data accurately to be utilized in VVC approaches. Further, this paper proposes a model-free, data-driven, centrally trained, and decentrally executed multi-agent deep reinforcement learning-based VVC architecture to regulate the voltage of distribution networks. A generative adversarial network (GAN) is incorporated to impute the unobservable PV data accurately, which improves the performance of the proposed control architecture. The proposed multi-agent-soft-actor–critic algorithm (MASAC)-based VVC technique utilizes the actual PV dataset as well as the imputed dataset from the GAN framework to learn the optimal coordinated control policy for controlling the optimal reactive power set-points of PV inverters. The effectiveness of the proposed approach is analyzed on a modified IEEE 34-bus test case with added PV inverters. The results are compared and analyzed with a base case model with no VVC and VVC with a local droop control approach, genetic algorithm optimization, and a centralized soft actor–critic-based approach. Moreover, the performance of the proposed approach is compared with that of a multi-agent VVC framework without using the PV generation data and load information as the system state. The results illustrate that the proposed method with more state input improves the voltage profile and reduces the power loss of the network across various loading and PV generation scenarios.

14 SOLAR ENERGY↗

Ab initio molecular dynamics simulation of structural transformation in zinc blende GaN under high pressure

High-pressure induced zinc blende to rocksalt phase transition in GaN has been investigated by ab initio molecular dynamics method to characterize the transformation mechanism at the atomic level. It was shown that at 100 GPa GaN passes through tetragonal and monoclinic states before rocksalt structure is formed. The transformation mechanism is consistent with that for other zinc blende semiconductors obtained from the same method. Detailed structural analysis showed that there is no bond breaking involved in the phase transition.

36 MATERIALS SCIENCE↗

Bulk moduli of Cr[subscript 2]GaC and Ti[subscript 2]GaN up to 50 GPa

Using a synchrotron radiation source and a diamond anvil cell, we measured the pressure dependencies of the lattice parameters of two Ga-containing polycrystalline MAX phases: Ti{sub 2}GaN and Cr{sub 2}GaC. The bulk moduli were calculated to be 189 {+-} 4 and 188 {+-} 5 GPa, respectively. Up to a pressure of about 50 GPa, no phase transformations were observed. Ti{sub 2}GaN compresses more easily along the c-axis, while Cr{sub 2}GaC compresses equally in both directions.

43 PARTICLE ACCELERATORS↗

Highly transparent ammonothermal bulk GaN substrates

A novel apparatus has been employed to grow ammonothermal (0001) gallium nitride (GaN) with diameters up to 2 in The crystals have been characterized by x-ray diffraction rocking-curve (XRC) analysis, optical and scanning electron microscopy (SEM), cathodoluminescence (CL), and optical spectroscopy. High crystallinity GaN with FWHM values about 20-50 arcsec and dislocation densities below 1 x 10(5) cm(-2) have been obtained. High optical transmission was achieved with an optical absorption coefficient below 1 cm(-1) at a wavelength of 450 nm. (C) 2014 Elsevier B.V. All rights reserved.

Jiang, WK↗

A study of damage-free in-situ etching of GaN in metalorganic chemical vapor deposition (MOCVD) by tertiarybutylchloride (TBCl)

This paper reports a study of the effect of NH 3 flow rate and reactor temperature on the tertiarybutylchloride (TBCl) etching of patterned GaN-on-sapphire templates. It is found that a reduced NH 3 flow rate and an elevated reactor temperature can eliminate islands or dots on the surface, while at the same time, enhance the etching around dislocations. TBCl etching was also performed on planar bulk GaN templates with much lower dislocation density. We find an atomically flat and layer-by-layer etching behavior within the region free of dislocations. Surface kinetics analysis reveals a short diffusion length of etching products. Room-temperature photoluminescence (PL) and x-ray photoelectron spectroscopy (XPS) measurements confirm that TBCl etching is capable of removing the damage and impurities induced by plasma etching without introducing additional damage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the ammonolysis of Ga{sub 2}O{sub 3}: An XRD, neutron diffraction and XAS investigation of the oxygen-rich part of the system Ga{sub 2}O{sub 3}-GaN

We investigated the ammonolysis of beta-Ga{sub 2}O{sub 3} at elevated temperatures by means of ex situ X-ray diffraction, ex situ neutron diffraction and in situ X-ray absorption spectroscopy. Within the detection limits of these methods, we can rule out the existence of a crystalline or amorphous oxynitride phase that is not derived from wurtzite-type GaN. No evidence for a beta-Ga{sub 2}O{sub 3} related oxynitride phase was found, and the nitrogen solubility in beta-Ga{sub 2}O{sub 3} was found to be below the detection limit of about 2-3 at% in the anionic sublattice. These findings were obtained by monitoring the anionic occupancy factors and the lattice parameters of the beta-Ga{sub 2}O{sub 3} phase obtained from total diffraction pattern refinement with the Rietveld method and by linear combination fitting of the X-ray absorption spectra that were recorded during the ammonolysis. - Graphical abstract: The ammonolysis of beta-Ga{sub 2}O{sub 3} powders forming GaN at temperatures of 600-780 deg. C was monitored by means of XRD, neutron diffraction and X-ray absorption spectroscopy in order to identify the possible intermediates and the solubility limit of nitrogen in the oxide lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ICP etching of GaN microstructures in a Cl 2 –Ar plasma with subnanometer-scale sidewall surface roughness

In this work, substrate temperature, RF power, and ICP power were investigated for their effects on GaN micropillar sidewall roughness and etch characteristics. Elevated substrate temperature was shown to improve the sidewall etch morphology at low RF powers (reduced physical bombardment) and low ICP powers (lower plasma densities). Increased lateral etching is observed with both increased ICP power and substrate temperature, which both act to increase the chemical component of the etch. Etch conditions with a high chemical driving force resulted in faceting along the a-plane on the sidewalls. This faceting produced extremely smooth surfaces with root-meansquare roughness (R q ) as low as 0.20 nm which is comparable to typical epitaxy-ready surfaces and smaller than the a-plane lattice spacing of 0.3186 nm. The smooth surfaces produced in this study enable possibilities for laser facets or for new device structures that require high quality surfaces for GaN regrowth.

36 MATERIALS SCIENCE↗

Self-Healing Thermal Annealing: Surface Morphological Restructuring Control of GaN Nanorods

With advances in nanolithography and dry etching, top-down methods of nanostructuring have become a widely used tool for improving the efficiency of optoelectronics. These nano dimensions can offer various benefits to the device performance in terms of light extraction and efficiency, but often at the expense of emission color quality. Broadening of the target emission peak and unwanted yellow luminescence are characteristic defect-related effects due to the ion beam etching damage, particularly for III–N based materials. In this article we focus on GaN based nanorods, showing that through thermal annealing the surface roughness and deformities of the crystal structure can be “self-healed”. Correlative electron microscopy and atomic force microscopy show the change from spherical nanorods to faceted hexagonal structures, revealing the temperature-dependent surface morphology faceting evolution. The faceted nanorods were shown to be strain- and defect-free by cathodoluminescence hyperspectral imaging, micro-Raman, and transmission electron microscopy (TEM). In-situ TEM thermal annealing experiments allowed for real time observation of dislocation movements and surface restructuring observed in ex-situ annealing TEM sampling. This thermal annealing investigation gives new insight into the redistribution path of GaN material and dislocation movement post growth, allowing for improved understanding and in turn advances in optoelectronic device processing of compound semiconductors.

36 MATERIALS SCIENCE↗