Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flyby”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Refining Lucy Mission Delta-V During Spacecraft Design Using Trajectory Optimization Within High-Fidelity Monte Carlo Maneuver Analysis

Recent advances linking medium-fidelity trajectory optimization and high-fidelity trajectory propagation/maneuver design software with Monte Carlo maneuver analysis and parallel processing enabled realistic statistical delta-V estimation well before launch. Completing this high-confidence, refined statistical maneuver analysis early enabled release of excess delta-V margin for increased dry mass margin for the Lucy Jupiter Trojan flyby mission. By 3.3 years before launch, 16 of 34 TCMs had 1000 re-optimized trajectory design samples, yielding tens of m/s lower 99%-probability delta-V versus targeting maneuvers to one optimal trajectory. One year later, 1000 re-optimized samples of all deterministic maneuvers and subsequent flybys further lowered estimated delta-V.

Trojan↗
NASA NTRSDate not supplied

Low-Thrust Transfer to Interplanetary Trajectories from Lunar Trajectories with Rideshare

Accessing interplanetary space is challenging when using low thrust systems. Injecting spacecraft onto interplanetary trajectories is difficult with small launch vehicles, but it is possible to instead transfer to an interplanetary trajectory from a lunar flyby. Such cases are useful, for example, in rideshares between lunar and interplanetary missions. This work examines the problem of rideshare for small satellites onto lunar flyby trajectories, with transfers to an interplanetary trajectory. Low thrust interplanetary trajectories are examined starting from a rideshare mission on a lunar trajectory using delivery systems based on a modified Rocket Lab USA Electron vehicle and Photon stage.

Darcey R Graham↗
NASA NTRS2020

Encealdus Orbilander: A Flagship Mission Concept for Astrobiology

"Whether life exists beyond Earth remains a fundamental question driving our exploration of the Solar System. At Saturn’s moon Enceladus, plumes of oceanic material vented into space allow the investigation of the astrobiological potential of an ocean world, hinted at by Cassini, without the necessity of drilling through kilometers of ice crust. The Enceladus Orbilander is a flagship ($2.56B in fiscal year 2025 dollars) mission concept created for the 2023–2033 Planetary Science Decadal Survey. Orbilander takes full advantage of the opportunity provided by Enceladus’ plumes to search for signs of life. A single spacecraft both orbits and lands, capturing samples from four distinct reservoirs offered by the plumes. These samples, both particulate and vapor, are then analyzed by the Life Detection Suite (LDS), a set of five instruments conducting complementary and orthogonal biosignature-seeking measurements. To provide the context that specifically enhances interpretation of LDS measurements, geochemical and geophysical investigations are conducted both in orbit and on the surface. These reveal the physio-chemical state of the ocean and core as well as the processes involved in ejection of plume material and how these affect the ocean material analyzed by the LDS. The Orbilander can be delivered to the Saturn system via several launch vehicle and trajectory options, including a direct trajectory (7-year cruise), a ∆V-EGA trajectory (9-year cruise) and several options using an inner cruise with Venus and Earth flybys (10-year cruise). Upon Saturn Orbit Insertion, a 4-year moon tour pumps down the Orbilander’s orbit to intercept Enceladus. The most optimal arrival times balance the Jupiter flyby opportunities of the late 2030s and solar illumination at the Enceladus high southern latitudes where plume material is most abundant. This mission concept therefore targets project start in 2030. Upon Enceladus Orbit Insertion, the Orbilander begins a 1.5-year-long campaign of landing site reconnaissance, remote sensing science, and collecting sufficient plume sample to run all but one of the LDS measurements. After successful landing, the Orbilander spends 2 years on the surface conducting multiple LDS measurements with all five instruments on actively and passively collected plume material, as well as seismic investigations. The schedule laid out here is well-defined, but the mission also has operational and resource flexibility should additional reconnaissance be needed. As part of the design study, mission and development risks were identified and mitigation strategies proposed. Technologies key to achieving the life detection science objectives include instrumentation matured under programs like COLDTech and ICEE-2, such as aspects of the sampling system and microfluidic devices, as well as well-known techniques like high-resolution and separation-capable mass spectrometers. Autonomous onboard navigation is planned to maintain a halo orbit around Enceladus to enable passive sampling from orbit as well as reconnaissance measurements for use in site selection and landing. Terrain relative navigation is included to ensure safe landing, given that targeted areas may contain landing hazards. Continued development of radioisotope thermoelectric generator (RTG) technology and long-life batteries is essential for this long duration mission. The Enceladus Orbilander represents an optimal point in the trade space of science value versus cost, taking advantage of the extensive knowledge of Enceladus provided by Cassini, how well Enceladus lends itself to a search for life in material from its ocean, and the flexibility afforded by the innovative design developed by the APL team. By taking full advantage of Enceladus’ plumes both in orbit and on the surface, Orbilander represents a robust search for life with complementary and orthogonal biosignatures as well as contextual geophysical and geochemical measurements, determining not only whether Enceladus is inhabited (at levels up to 500,000× scarcer than in Earth’s oceans) but also why. "

Exobiology↗
NASA NTRS2021

Improved Determination of Europa's Long-Wavelength Topography Using Stellar Occultations

Europa Clipper will arrive at Jupiter at the end of this decade and will explore Europa through a series of flybys. One of its many goals is to characterize Europa's topography and global shape using the Europa Imaging System and Radar for Europa Assessment and Sounding: Ocean to Near-surface (REASON) instruments. In addition, Europa Clipper's UV Spectrograph will observe stars pass behind (be occulted by) Europa. The spectrograph has sufficiently precise timing, corresponding to a topographic precision of order meters, that these occultations can also serve as altimetric measurements. Because of gaps in the REASON radar altimeter coverage imposed by the flyby geometries, the addition of ∼100 occultations results in a substantial improvement in the recovery of Europa's long-wavelength shape. Typically, five extra spherical harmonic degrees of topography can be recovered by combining occultations with radar altimetry.

Jacob N. H. Abrahams↗
NASA NTRSDate not supplied

VALENTInE: A Concept for a New Frontiers Class Long Duration In-Situ Balloon Mission to Venus

Venus and Earth are similar in bulk composition, size, density, and approximate distance from the Sun, yet Venus’s modern-day climate and surface geology is distinctly different [1]. Previous missions to Venus revealed unusual volcanic features, possible continental crust, widespread volcanic plains, a weak magnetic field [2], and insights into the Venusian atmosphere [3,4]. Unfortunately, data from these missions were limited in spatial and temporal resolution and global extent. A future mission to Venus is critical to address fundamental questions surrounding the chemical composition and dynamics of the Venusian atmosphere [5], its geologic history [6,7], its internal structure [8,9], and its habitability throughout time [10,11]. We present the Venus Air and Land Expedition: a Novel Trailblazer for In situ Exploration (VALENTInE) mission to meet this need. VALENTInE is a variable altitude balloon that will passively float in Venus’s atmosphere between 45 and 55 km altitude. VALENTInE will acquire atmospheric data at varying latitudes and longitudes in addition to mapping the surface geomorphology and mineralogy across multiple terrains. Mission Objectives: The VALENTInE mission concept is driven by four main science objectives: 1. Determine whether the driving force of the superrotation of Venus’s atmosphere is caused by horizontal or vertical momentum transport. 2. Determine whether the atmospheric composition and noble gas inventory of the Venusian atmosphere is a product of outgassing from the initial protoplanetary source or if there are significant contributions from exogenic sources. 3. Determine whether the tesserae regions (particularly Aphrodite Terra) are felsic and relatively older than surrounding regions. 4. Determine if there is any evidence of a recent dynamo preserved in the rock record of Venus. Mission Overview: A balloon architecture provides a robust system that can survive long-term in the Venusian environment while taking accurate measurements of the lower cloud deck and surface. Two prior balloon missions to Venus, VEGA 1 and VEGA 2 in 1984, have demonstrated the potential for such planetary exploration; however, these missions were short-lived (46 hr), with limited range (54 km). Our spacecraft concept consists of a battery powered balloon with a gondola and flyby carrier stage (Fig. 1). Our novel design allows for at least 15 days of atmospheric exploration, including multiple ascents and descents in the Venus atmosphere. VALENTInE is baselined to launch in 2032, cruise on solar power for 128 days, enter, descend, and inflate (EDI) into Venus’s atmosphere above Aphrodite Terra, and float in Venus’s atmosphere for a total nominal mission duration of 15 days. The balloon, able to control its altitude by changing its buoyancy, will make one full circumnavigation every 4–8 days and move poleward ~1 o latitude per day; it will be passively directed by the horizontal air currents on Venus. The balloon can only be controlled in the z direction, and the expected latitude range is ±10° from EDI. The balloon itself will be a tracer for atmospheric structures such as zonal winds [5, 12]. During the 15-day operational period, there will be five dips to 45 km for a compositional study of the lower atmosphere and geological and magnetic mapping of the surface. Dips are used to take images and measurements closer to the surface and to obtain in situ vertical atmospheric profiles between 45 and 55 km. Instruments: The VALENTInE instrument payload will allow for extensive study of the geology, atmosphere, and interior of Venus. The instrument suite consists of six instruments. The mission profile for each instrument is shown in Fig. 2. Lower Atmosphere Meteorology Analyzer (LAMA) is an atmospheric structure instrument consisting of a thermometer, barometer, and accelerometer to continuously measure temperature and pressure as a function of altitude, longitude, and latitude. TracE and Noble Gas Investigator (TENGI) is aneutral mass spectrometer used to sample the dense atmosphere. TENGI will operate continuously at 45 km and 55 km and will measure D/H ratios, as well as Ne, Ar, and O isotopic ratios. Kilometer Scale Spectral Imager (KSSI) is amultispectral imager (850-1150 nm) used to resolve surface features on the order of km. Near InfraRed Multispectral Photometer (NIRMP) is an Infrared (IR) photometer used to image the surface through the clouds to characterize mineral assemblages at five different areas of the surface. NIRMP will be operated during dwell. ELevation REConnaissance (ELREC) is a light detection and ranging (LIDAR) instrument used for measuring topography at five different areas of the surface. The ELREC data will be combined with those of NIRMP to determine mineral assemblages and how they correlate to topography. Magnetic Exploration and Interior Detective (MEID) is a magnetometer used to detect any near-surface magnetic anomalies. The magnetometer will continuously operate at all altitudes. Mission Design: The spacecraft’s propulsion system will have a wet mass of 930 kg and will be launched on an Atlas V rocket. The spacecraft will jettison the payload upon arrival in Venus’s atmosphere before decelerating to orbital velocity. Figure 2. Notional power-dip profile while the balloon is on the dayside. Risks and Challenges: Raising and lowering the spacecraft to dip beneath the haze layer require a large amount of energy. This issue was partly compensated by limiting the number of dips over the 15 day prime mission. Power needs for pumping helium are reduced by slowing the descent speed, which consequently increases spatial resolution of in situ measurements between 45 and 55 km. The main limitation for the duration of the mission is the need to carry 15 days’ worth of batteries. The bus experiences external Venusian temperatures ranging from ~27°C at 55 km altitude to ~110°C at 45 km altitude. These high atmospheric temperatures require thermal protection for the bus (instruments, electronics, and flight systems) during its descent, dwell at 45 km, and ascent. The bus is maintained at a mechanically safe temperature range of -10°C to 50°C using white external paint, multi-layer insulation (MLI), mechanical/thermal isolation (e.g. Ti, composites), and ~57 kg of Phase Change Materials (PCM). Images and spectra taken below the haze dominate the available data transmission regardless of the time spent at 45 km. Therefore, less time at the lower altitude mainly reduces the coverage of in situ measurements there. Further, we assumed an unrealistically low-density material for the helium storage tanks on the gondola. However, this issue is partially resolved if we were to jettison 75% of the spent helium storage tanks. After the entry process, the balloon volume remains mostly inflated and storage tanks are required only for reducing balloon volume in dipping to 45 km. This mission was planned against an expected New Frontiers 5 (NF5) cost cap of $1B, as the NF5 call had not yet been released. The mission we describe fits within the predicted cost cap if the flyby carrier stage, responsible for powering the spacecraft during cruise and for relaying in situ measurements back to Earth, can be contributed by another space agency. Acknowledgments: We thank the JPL Planetary Science Summer School, especially A. Nash, J. Scully, K. Mitchell, L. Lowes, and J. Armijo, and our mentors from JPL Team X. Thank you to our review panel for their insightful review. References: [1] Kane, S. et al. (2019) JGR:Ps, 124 , 2015–2028. [2] Phillips, J. L., & Russell, C. T. (1987). JGR: Space Physics , 92 (A3), 2253-2263. [3] Nakamura, M. et al. (2018) Earth Planets Space, 70 (1), 144. [4] Svedhem, H. et al. (2009) JGR:P 114 (E5). [5] Limaye et al. (2009) Decadal Survey White Paper . [6] Ivanov, M. and Head, J. (2011) PSS, 59 (13) , 1559-1600. [7] Smrekar, S. et al. (2018) Space Sci Rev, 214 (5), 88. [8] O’Rourke, J. et al. (2018) EPSL, 502 , 46-56. [9] O’Rourke J. et al. (2019) GRL , (46), 5768–5777 [10] Way, M. et al. (2016) GRL, 43 (16), 8376-8383. [11] Way, M. et al. (2020) JGR:P, 125 (5), e2019JE006276. [12] Preston, R. A. et al. (1986) Science, 231 (4744), 1414-1416.

Mission Concept↗
NASA NTRS1995

Multiple Encounter Missions with the Trojan and Main Belt Asteroids

The clustering of asteroids, the Trojans, at the Jupiter liberation points L4 and L5 offer yearly launch opportunities for double flybys. Also, passage through the main belt can add one or two additional flybys to make this an attractive mission for small spacecraft. The Trojans represent important clusters of main-belt sized bodies. This study explores the possibilities of multiple asteroid encounters.

astrodynamics↗
NASA NTRS1997

Galileo Europa Mission (GEM) Tour Design

The orbital tour trajectory that was selected for the Galileo mission includes ten close flybys of the Galilean satellites Europa, Ganymede, and Callisto, additional distant flybys of these satellites, lo torous observations, and many other events that provide broad opportunities for scientific observations.

Galileo↗
NASA NTRS2019

A Titan gravity-assist technique for ballistic tours skimming over the rings of Saturn

A novel type of Titan-flyby orbits featuring passes of the Saturn rings at close range has been recently discovered. The purpose of this study is to explore the trajectory design space and assess the applicability of such orbits to the design of a Saturn Ring Tour mission concept. A set of initial conditions required to start a tour of the rings is first determined and a flyby sequence to maximize the science observation time over desired ring regions in terms of range distance, relative velocity and duration is then selected. To demonstrate the potential of this technique, a sample high-fidelity ballistic ring tour is detailed.

Tiscareno, Matthew↗
NASA NTRS2017

Radar Ambiguities and Signal Processing Design Tradeoffs in the REASON Radar Sounder

NASA’s planned Europa Clipper mission would carry a radar sounder which operates at HF and VHF frequencies that can penetrate the icy shell of Europa. The sounder would be used to characterize subsurface bodies of liquid water and to measure the thickness of the icy shell. The spacecraft would make observations during flyby to reduce radiation exposure. The varying geometry during the flyby is expected to cause varying radar ambiguity and surface clutter contamination. At the same time, data down-link restrictions would require on-board pulse summation to reduce data volume which would require on-board Doppler filtering to control clutter and ambiguity contamination levels. This paper will study some of the design trade-offs involved in specifying the on-board Doppler filtering.

Hawkins, D.↗
NASA NTRS2017

Landing on Europa: Challenges, Technologies, and a Strategy

Jupiter’s moon Europa is of intense scientific interest because of the vast quantities of salty liquid water which likely lay beneath its thin icy crust and the tantalizing prospect of finding life elsewhere in the solar system. The planned Europa Mission, which would perform remote science through multiple flybys of Europa, is under development and promises to yield unprecedented insight into this intriguing body. However, there remains a strong desire in the scientific community to perform in situ Europa science through a landed mission. Europa presents unique challenges to a landing mission because of its hostile radiation environment and the lack of information about its terrain. As a complement to the flyby mission, a bold concept to land on Europa and perform in situ science is being studied. Such a mission requires significant technology development to overcome the inherent landing challenges. This paper provides a brief overview of the Europa Lander mission concept and its notional objectives. It then describes the significant challenges associated with landing on Europa, the technologies required to overcome those challenges, and a strategy for Deorbit, Descent, and Landing.

Frick, Andreas↗
NASA NTRS2017

Optical Navigation During Cassini's Solstice Mission

After nearly twenty years in flight, Cassini’s mission at Saturn will conclude as it purposely dives into Saturn’s atmosphere on September 15, 2017. Primarily to avoid moons potentially harboring conditions for life and with propellant very low, the intentional plunge into the atmosphere was set in motion years ago. We take this opportunity to give an overview of the optical navigation and its roles throughout the mission. The paper describes the navigation process and the evolution of optical navigation over the past thirteen years. The last equatorial phase of the Cassini mission was particularly challenging for the OD team as the Saturn system was not being estimated anymore, and it had been a few years since the last icy moon flybys. Science pictures of Enceladus one month prior to the Enceladus encounters confirmed the moon’s position to be in good agreement with the Saturn system dynamical modeling used. This reduced Enceladus’s absolute uncertainty by a factor of three, less than 1 km, and gave confidence the navigation team could achieve acceptable flybys and meet science objectives.

Tarzi, Zahi↗
NASA NTRSDate not supplied

The Stardust Sample Return Mission

The NASA Discovery-class Stardust comet sample return mission collected samples from the coma of Comet 81P/Wild 2 and returned them to Earth for study in 2006. The samples were collected at hypervelocities using low-density aerogel as the spacecraft did a flyby of the comet’s nucleus. In this talk, I will begin by giving an overview of the mission that covers (i) the mission design, (ii) the spacecraft, and (iii) the spacecraft’s encounter with Comet/81P Wild 2 and its subsequent return to Earth. This will be followed by a discussion of many of the principal scientific discoveries that resulted from both the comet flyby and the study of the returned samples in terrestrial laboratories (discoveries that will continue to grow as the returned samples continue to be studied in the future).

Comets↗
NASA NTRS2020

ICESat-2 Tracking App for Public Engagement

Information regarding the predicted ground tracks of Earth observing satellites is typically difficult to find and understand for the general public. This paper will describe and demonstrate an iOS mobile application for tracking NASA’s ICESat-2 (Ice, Cloud, and land Elevation Satellite 2), making it easier for users to see exactly when the satellite will be passing over any location in the world. ICESat-2, launched in 2018, uses green lasers to track elevation changes in polar ice and indirectly measure trees, land, and water, providing a precise height map of our planet. Most satellite tracking mobile apps display information about where a specific satellite is at that given moment and when it will be passing over the user’s location in the near future. ICESat-2 the app differs by allowing users to search for data about the satellite’s future flybys relative to a specific search location and radius that they get to choose. The search results include points up to three months into the future. By supplying user-centric results, users are provided relevant data in an easy-to- access manner. Additionally, this data is very clear to visualize in-app through maps, pins, and ground track lines. This becomes an incredibly useful tool not only to plan an observation of the satellite as it passes, but also for knowing when elevation data for a specific area will be available. In addition, this flyby information helps students and citizen scientists take more valuable tree height measurements to better validate the elevation data collected by the satellite. To achieve this outreach product, three key components were developed. These include a Python script to simplify the raw ground track data, a Node.js server that actively takes requests, and the iOS app itself. From initial beta tests, it has been noted that providing users with a map for visual awareness of search radius and result coordinates gives them a more comprehensive understanding of the data. Overall, by cleaning the raw data and making it available in a much more accessible and easier to understand way, ICESat-2 the app has exceeded expectations in providing educational and exciting data for all.

Harbeck, Kaitlin↗
NASA NTRS2021

The Europa Clipper Gravity / Radio Science Investigation

Introduction: The Jovian moon Europa has long been a fascinating planetary body because of its young icy surface and subsurface ocean. Its high appeal for astrobiology and habitability implications in the solar system and beyond have made it the subject of intense scientific inquiry and of many past mission studies. The NASA flagship Europa Clipper mission [1] is currently in development and slated to launch in 2024. After insertion into the Jupiter system, it will conduct more than 40 flybys of Europa over the course of several years [2]. The suite of nine science instruments is uniquely suited to this flyby tour strategy, providing remote sensing and in situ observations of Europa and its relationship to Jupiter [3]. The primary objective of Europa Clipper is to assess the habitability of Europa, an overarching goal that rests on improving our understanding of Europa’s interior structure, composition, and geologic activity. Here we describe the Gravity/Radio Science (G/RS) investigation of Europa Clipper, which will make important observations to address key science goals.

Pappalardo, R. T.↗