Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Crossflow Instability on a Wedge-Cone at Mach 3.5

As a follow-on activity to the HyBoLT flight experiment, a six degree half angle wedge-cone model at zero angle of attack has been employed to experimentally and computationally study the boundary layer crossflow instability at Mach 3.5 under low disturbance freestream conditions. Computed meanflow and linear stability analysis results are presented along with corresponding experimental Pitot probe data. Using a model-mounted probe survey apparatus, data acquired to date show a well defined stationary crossflow vortex pattern on the flat wedge surface. This effort paves the way for additional detailed, calibrated flow field measurements of the crossflow instability, both stationary and traveling modes, and transition-to-turbulence under quiet flow conditions as a means of validating existing stability theory and providing a foundation for dynamic flight instrumentation development.

Beeler, George B.↗
NASA NTRS2025

Generalized Reference Targeting for Spaceflight

For spaceflight programs to achieve some of the aggressive exploration initiatives such as visiting and landing on other celestial bodies, rendezvousing with other orbiting vehicles, and ultimately returning crew safely to Earth, an assortment of targeting algorithms to compute the necessary burns to strategically maneuver a spacecraft to a variety of destinations are required. Numerous examples exist, but rather than creating and implementing multiple targeting solutions, is it possible to have a general targeting model that can accommodate a variety of applications? Originally motivated for mission design and analysis purposes, this paper outlines a generalized reference targeting algorithm for spaceflight that may also have applications in on-orbit flight software. It accommodates arbitrary flight dynamics and both impulsive and finite burns for either absolute or relative targeting applications. It also allows for an arbitrary number of targeting design parameters such as multiple discrete correction burns or finite thrust parameters to satisfy numerous combinations of targeting constraints that can have fixed or variable time epochs. Given a reference trajectory, this targeting technique provides a general framework to quickly solve an assortment of targeting problems that may be well-defined, over-determined, or under-determined while naturally producing metrics providing insight into the controllability for a given problem formulation. Due to the derivation, speed, and accuracy of the algorithm, it lends to supporting rapid linear covariance analysis and robust trajectory design applications for a variety of flight phases such as rendezvous and docking, cislunar transfer, interplanetary flight, orbit maintenance, de-orbit, and powered descent and landing.

Targeting↗
NASA NTRSDate not supplied

Stochastic Verification by Analysis for Autonomous Systems Management Architecture (ASMA)

The Gateway Vehicle Systems Manager (VSM) is the top-level of a distributed, hierarchical software control system. VSM is data-driven and will make decisions related to mission, fault, resource management and vehicle control. These attributes combined with a high degree of autonomy make it susceptible to emergent behavior. In order to achieve the high level of confidence needed in this critical system, the VSM team has developed a multifaceted verification strategy employing traditional verification techniques, simulation, model checking, and runtime verification. Individual algorithms are verified using conventional testing and model checking using assume-guarantee contracts. A discrete event-based simulation approach is being developed to verify timelines. This presentation describes an enhancement to the verification approach using analysis to enhance system robustness by detecting and resolving the potential for emergent behavior. The verification by analysis employs a Software in the Loop (SITL) environment with real flight software executing on emulated processors, simulations of vehicle subsystems, flight dynamics, and human inputs. Since the possible input space and configuration data set are too large for exhaustive testing, a Monte Carlo approach is used to cover feasible scenarios, augmented with corner cases and known higher-risk scenarios. A key problem in using Monte Carlo-based system verification is evaluating test results to ensure that system behavior is correct. The presentation describes the approach the VSM team uses to monitor behavior for compliance with predetermined boundaries and to identify anomalous behavior for further analysis. This presentation describes the multi-level systems approach to verification, and the simulation-based layer that covers the feasible state space: 1. Overview of the Gateway VSM 2. Special challenges due to heterogeneous, hierarchical architecture 3. Modeling and simulation environment using flight software and system simulations 4. Developing input sets to ensure state-space coverage 5. Developing model and data configuration sets to ensure model coverage 6. Interpreting results without predetermined outcomes 7. Lessons learned and future work

Verification and Validation↗
NASA NTRS2003

Technical Evaluation Report, Part A - Vortex Flow and High Angle of Attack

A symposium entitled Vortex Flow and High Angle of Attack was held in Loen, Norway, from May 7 through May 11, 2001. The Applied Vehicle Technology (AVT) panel, under the auspices of the Research and Technology Organization (RTO), sponsored this symposium. Forty-eight papers, organized into nine sessions, addressed computational and experimental studies of vortex flows pertinent to both aircraft and maritime applications. The studies also ranged from fundamental fluids investigations to flight test results, and significant results were contributed from a broad range of countries. The principal emphasis of this symposium was on "the understanding and prediction of separation-induced vortex flows and their effects on military vehicle performance, stability, control, and structural design loads." It was further observed by the program committee that "separation- induced vortex flows are an important part of the design and off-design performance of conventional fighter aircraft and new conventional or unconventional manned or unmanned advanced vehicle designs (UAVs, manned aircraft, missiles, space planes, ground-based vehicles, and ships)." The nine sessions addressed the following topics: vortical flows on wings and bodies, experimental techniques for vortical flows, numerical simulations of vortical flows, vortex stability and breakdown, vortex flows in maritime applications, vortex interactions and control, vortex dynamics, flight testing, and vehicle design. The purpose of this paper is to provide brief reviews of these papers along with some synthesizing perspectives toward future vortex flow research opportunities. The paper includes the symposium program. (15 refs.)

VORTEX BREAKDOWN↗
NASA NTRSDate not supplied

Supersonic Flight Testing to Assess Ground Recording Systems for NASA's Low Boom Flight Demonstrator

The National Aeronautics and Space Administration (NASA) has performed two supersonic flight test campaigns in preparation for the extensive ground measurements that will be taken during Quesst Phase 2 to verify the low boom from the X-59. The first test campaign was Carpet Determination In Entirety Measurements (CarpetDIEM) Phase II, with F/A-18B aircraft and a subscale ground sensor array and the second campaign was CarpetDIEM Phase III,with both F-15B and F/A-18D aircraft and a geographically large scale ground sensor array. CarpetDIEM Phase II served to evaluate prototypes of the state-of-the-art Ground Recording System (GRS) which NASA is developing in order to record the low boom of X-59. The prototype GRS measured both N-wave and evanescent wave sonic booms which were1.4±1.1PLdB from co-located truth sources during these flights. CarpetDIEM Phase II was also used to down select two NASA developed unattended trigger concepts, one based on Automatic Dependent Surveillance-Broadcast (ADS-B) and the other utilizing satellite communications. Both unattended trigger concepts performed well, with the ADS-B based concept being chosen at the conclusion of CarpetDIEM Phase II for integration with the GRS. CarpetDIEM Phase III was primarily a logistics risk-reduction effort for Quesst Phase 2, but also sought to evaluate the capabilities, including the newly implemented ADS-B unattended trigger, and ruggedness of the GRS during a long-term deployment. The F-15B stood in for the X-59, flying two different X-59flight profiles, including an accelerating climb maneuver. The GRS successfully self-triggered to capture 80% of sonic booms generated from both steady and dynamic flight maneuvers. Low booms, defined by the project as being≤80 PLdB, were recorded by the GRS near the end of CarpetDIEM Phase III. The GRS measured low booms were found to be within0.4±0.1PLdB of a co-located truth source.

Forrest L Carpenter IV↗
NASA NTRS1996

Experience Gained From Launch and Early Orbit Support of the Rossi X-Ray Timing Explorer (RXTE)

this paper reports the results to date of early mission support provided by the personnel of the Goddard Space Flight Center Flight Dynamics Division (FDD) for the Rossi X-Ray Timing Explorer (RXTE) spacecraft. For this mission, the FDD supports onboard attitude determination and ephemeris propagation by supplying ground-based orbit and attitude solutions and calibration results. The first phase of that support was to provide launch window analyses. As the launch window was determined, acquisition attitudes were calculated and calibration slews were planned. postlaunch, these slews provided the basis for ground determined calibration. Ground determined calibration results are used to improve the accuracy of onboard solutions. The FDD is applying new calibration tools designed to facilitate use of the simultaneous, high-accuracy star observations from the two RXTE star trackers for ground attitude determination and calibration. An evaluation of the performance of these tools is presented. The FDD provides updates to the onboard star catalog based on preflight analysis and analysis of flight data. The in-flight results of the mission support in each area are summarized and compared with pre-mission expectations.

Fink, D. R.↗
NASA NTRS2015

Rigging Test Bed Enables Development of Multi-Stage Decelerator Extraction

The Low Density Supersonic Decelerator (LDSD) project developed a Parachute Deployment System (PDS) for use on its Supersonic Flight Dynamics Tests (SFDT). The PDS involves a multi-stage pilot driven extraction of a supersonic parachute. The uncertainties and complexities of developing the design for the lines and rigging of the PDS were addressed through testing in the Rigging Test Bed (RTB). The RTB provided a facility capable of simulating a variety of extraction scenarios with full scale hardware on the ground. Through more than 100 tests conducted in the facility, a wealth of data and experience were gained that fueled the PDS development. The utility of this testing and the lessons learned are presented in this paper. The goal is to inform the development of similar systems in the future and highlight the value and flexibility this type of testing offers rapid hardware development. The RTB provided a great compliment to the analytical models greatly compressing what would have otherwise been a very lengthy analytical effort or potentially much expanded flight test campaign.

Kenig, Sivan J.↗
NASA NTRS2013

Orion MPCV Touchdown Detection Threshold Development and Testing

A robust method of detecting Orion Multi ]Purpose Crew Vehicle (MPCV) splashdown is necessary to ensure crew and hardware safety during descent and after touchdown. The proposed method uses a triple redundant system to inhibit Reaction Control System (RCS) thruster firings, detach parachute risers from the vehicle, and transition to the post ]landing segment of the Flight Software (FSW). The vehicle crew is the prime input for touchdown detection, followed by an autonomous FSW algorithm, and finally a strictly time based backup timer. RCS thrusters must be inhibited before submersion in water to protect against possible damage due to firing these jets under water. In addition, neglecting to declare touchdown will not allow the vehicle to transition to post ]landing activities such as activating the Crew Module Up ]righting System (CMUS), resulting in possible loss of communication and difficult recovery. A previous AIAA paper gAssessment of an Automated Touchdown Detection Algorithm for the Orion Crew Module h concluded that a strictly Inertial Measurement Unit (IMU) based detection method using an acceleration spike algorithm had the highest safety margins and shortest detection times of other methods considered. That study utilized finite element simulations of vehicle splashdown, generated by LS ]DYNA, which were expanded to a larger set of results using a Kriging surface fit. The study also used the Decelerator Systems Simulation (DSS) to generate flight dynamics during vehicle descent under parachutes. Proto ]type IMU and FSW MATLAB models provided the basis for initial algorithm development and testing. This paper documents an in ]depth trade study, using the same dynamics data and MATLAB simulations as the earlier work, to further develop the acceleration detection method. By studying the combined effects of data rate, filtering on the rotational acceleration correction, data persistence limits and values of acceleration thresholds, an optimal configuration was determined. The lever arm calculation, which removes the centripetal acceleration caused by vehicle rotation, requires that the vehicle angular acceleration be derived from vehicle body rates, necessitating the addition of a 2nd order filter to smooth the data. It was determined that using 200 Hz data directly from the vehicle IMU outperforms the 40 Hz FSW data rate. Data persistence counter values and acceleration thresholds were balanced in order to meet desired safety and performance. The algorithm proved to exhibit ample safety margin against early detection while under parachutes, and adequate performance upon vehicle splashdown. Fall times from algorithm initiation were also studied, and a backup timer length was chosen to provide a large safety margin, yet still trigger detection before CMUS inflation. This timer serves as a backup to the primary acceleration detection method. Additionally, these parameters were tested for safety on actual flight test data, demonstrating expected safety margins.

Daum, Jared↗
NASA NTRS2006

NASA Balloon Technology Activities

The National Aeronautics and Space Administration (NASA) Balloon Program technology development efforts are fundamental to improving the capabilities of the balloon systems, better understanding of the flight dynamics, and to support the science missions throughout the next decade. Building on the foundations of the 20-year research and development program, a technology roadmap has been generated which identifies specific areas of interest to NASA and the vision of future developments. The major components of the roadmap are: vehicle systems, ballooncraft systems, operational and safety support systems, and planetary vehicles. Within each of these major components, technologies are targeted that will provide both better understanding and foster advancements. The Program's technology thrust areas are directed both in broad efforts that touch on a number of the major components as well as specific tasks that address elements within a specific component. Advances in vehicle systems have focused on producing better balloon designs. This is being attempted through the use of improved inputs into the ba!loon des@ process. Central to this is an increasing the understanding of materials used to fabricate balloons. Testing techniques have been improved with better bi-axial characterization of the balloon materials. More realistic radiative properties of the balloon films and components have also been made. Analytical assessments of the balloon designs are also key in improving balloon designs. These analytical assessments have been accomplished using improving analysis tools and an increased understanding of the float environment. Details of these improvements will be presented. To help improve the operational and flight safety of the balloons, improved flight performance predictions have been made using new analytical tools as well as incorporating the increased understanding of the float environment. These two have combined to allow for improved post-flight balloon performance correlations. A potential to significantly improve the potential safety of a long duration flight can be accomplished using some form of a trajectory modification system. An overview of the development efforts for a trajectory modification system will be presented. A number of efforts will be presented that are focused on the improvement of the ballooncraft systems. Planetary ballooning activities have benefited from a number of separate but related technology advancements made by the NASA Balloon Program's technology developments. The tools, techniques, and advancements made for balloon design and balloon analysis are directly applicable to the processes to develop planetary balloons for either Mars or Venus. An overview of the NASA Balloon Program's role in these efforts and testing will be presented. The technology roadmap, as well as specific projects and recent advancements, will be presented. This overview will demonstrate the technology advancements made by the NASA Balloon Program are focusing on leading balloon developments into the future.

Fairbrother, Debora A.↗
NASA NTRS2015

Flexible Micropost Arrays for Shear Stress Measurement

Increased fuel costs, heightened environmental protection requirements, and noise abatement continue to place drag reduction at the forefront of aerospace research priorities. Unfortunately, shortfalls still exist in the fundamental understanding of boundary-layer airflow over aerodynamic surfaces, especially regarding drag arising from skin friction. For example, there is insufficient availability of instrumentation to adequately characterize complex flows with strong pressure gradients, heat transfer, wall mass flux, three-dimensionality, separation, shock waves, and transient phenomena. One example is the acoustic liner efficacy on aircraft engine nacelle walls. Active measurement of shear stress in boundary layer airflow would enable a better understanding of how aircraft structure and flight dynamics affect skin friction. Current shear stress measurement techniques suffer from reliability, complexity, and airflow disruption, thereby compromising resultant shear stress data. The state-of-the-art for shear stress sensing uses indirect or direct measurement techniques. Indirect measurements (e.g., hot-wire, heat flux gages, oil interferometry, laser Doppler anemometry, small scale pressure drag surfaces, i.e., fences) require intricate knowledge of the studied flow, restrictive instrument arrangements, large surface areas, flow disruption, or seeding material; with smaller, higher bandwidth probes under development. Direct measurements involve strain displacement of a sensor element and require no prior knowledge of the flow. Unfortunately, conventional "floating" recessed components for direct measurements are mm to cm in size. Whispering gallery mode devices and Fiber Bragg Gratings are examples of recent additions to this type of sensor with much smaller (m) sensor components. Direct detection techniques are often single point measurements and difficult to calibrate and implement in wind tunnel experiments. In addition, the wiring, packaging, and installation of delicate micro-electromechanical devices impede the use of most direct shear sensors. Similarly, the cavity required for sensing element displacement is sensitive to particulate obstruction. This work was focused on developing a shear stress sensor for use in subsonic wind tunnel test facilities applicable to an array of test configurations. The non-displacement shear sensors described here have minimal packaging requirements resulting in minimal or no disturbance of boundary layer flow. Compared to previous concepts, device installation could be simple with reduced cost and down-time. The novelty lies in the creation of low profile (nanoscale to 100 μm) micropost arrays that stay within the viscous sub-layer of the airflow. Aerodynamic forces, which are related to the surface shear stress, cause post deflection and optical property changes. Ultimately, a reliable, accurate shear stress sensor that does not disrupt the airflow has the potential to provide high value data for flow physics researchers, aerodynamicists, and aircraft manufacturers leading to greater flight efficiency arising from more in-depth knowledge on how aircraft design impacts near surface properties.

Wohl, Christopher J.↗
NASA NTRS2010

Operational Lessons Learned from the Ares I-X Flight Test

The Ares I-X flight test, launched in 2009, is the first test of the Ares I crew launch vehicle. This development flight test evaluated the flight dynamics, roll control, and separation events, but also provided early insights into logistical, stacking, launch, and recovery operations for Ares I. Operational lessons will be especially important for NASA as the agency makes the transition from the Space Shuttle to the Constellation Program, which is designed to be less labor-intensive. The mission team itself comprised only 700 individuals over the life of the project compared to the thousands involved in Shuttle and Apollo missions; while missions to and beyond low-Earth orbit obviously will require additional personnel, this lean approach will serve as a model for future Constellation missions. To prepare for Ares I-X, vehicle stacking and launch infrastructure had to be modified at Kennedy Space Center's Vehicle Assembly Building (VAB) as well as Launch Complex (LC) 39B. In the VAB, several platforms and other structures designed for the Shuttle s configuration had to be removed to accommodate the in-line, much taller Ares I-X. Vehicle preparation activities resulted in delays, but also in lessons learned for ground operations personnel, including hardware deliveries, cable routing, transferred work and custodial paperwork. Ares I-X also proved to be a resource challenge, as individuals and ground service equipment (GSE) supporting the mission also were required for Shuttle or Atlas V operations at LC 40/41 at Cape Canaveral Air Force Station. At LC 39B, several Shuttle-specific access arms were removed and others were added to accommodate the in-line Ares vehicle. Ground command, control, and communication (GC3) hardware was incorporated into the Mobile Launcher Platform (MLP). The lightning protection system at LC 39B was replaced by a trio of 600-foot-tall towers connected by a catenary wire to account for the much greater height of the vehicle. Like Shuttle, Ares I-X will be stacked on a MLP and rolled out to the pad on a Saturn-era crawler-transporter. While Ares I-X was only held in place by the four hold-down posts on its aft skirt during rollout, a new vehicle stabilization system (VSS) attached to the vertical service structure kept the vehicle from undue swaying prior to launch at the pad, LC 39B. Following the launch, the flight test vehicle first stage was recovered with the aid of new parachutes resized to accommodate the five-segment-long first stage, which had a much greater length and mass than the Shuttle s reusable solid rocket boosters. After splashdown, recovery divers exercised extra care when handling the first stage to ensure that the flight data recorders in the fifth segment simulator were not damaged by exposure to sea water. The data recovered from the Ares I-X flight test will be very valuable in verifying the predicted environments and models used to design the vehicle. Lessons learned from Ares I-X will be shared with the Ares Projects through written and verbal reports and through integration of mission team members into the Project workforce.

Davis, Stephan R.↗
DOE OSTI2024

Evidence of Directional Structural Superlubricity and Lévy Flights in a van der Waals Heterostructure

Abstract Structural superlubricity is a special frictionless contact in which two crystals are in incommensurate arrangement such that relative in‐plane translation is associated with vanishing energy barrier crossing. So far, it has been realized in multilayer graphene and other van der Waals (2D crystals with hexagonal or triangular crystalline symmetries, leading to isotropic frictionless contacts. Directional structural superlubricity, to date unrealized in 2D systems, is possible when the reciprocal lattices of the two crystals coincide in one direction only. Here, directional structural superlubricity a α‐bismuthene/graphite van der Waals system is evidenced, manifested by spontaneous hopping of the islands over hundreds of nanometers at room temperature, resolved by low‐energy electron microscopy and supported by registry simulations. Statistical analysis of individual and collective α‐bismuthene islands populations reveal a heavy‐tailed distribution of the hopping lengths and sticking times indicative of Lévy flight dynamics, largely unobserved in condensed‐matter systems.

Le Ster, Maxime↗
DOE OSTI2023

Revisiting Reentry Roll Resonance

Here, this paper revisits the subject of reentry roll resonance, which occurs when the roll rate and pitch frequency become equal in a spinning reentry vehicle. A first-principles model is developed and analyzed numerically and by using a reduced-order pendulum model for the relative phase of the roll and pitch/yaw axes. The results show good qualitative agreement with recent flight data and provide a natural physical interpretation. Based on the model it is suggested that sustained roll resonance depends primarily on the initial phase relationship between the pitch and roll axes, in addition to the vehicle moments of inertia and the vehicle symmetry. Finally the model is used to propose a mechanism for sustained resonance in vehicles spinning about a major axis, a condition previously thought to be forbidden.

33 ADVANCED PROPULSION SYSTEMS↗