Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Multi-phase glass-ceramics as a waste form for combined fission products: alkalis, alkaline earths, lanthanides, and transition metals

In this study, multi-phase silicate-based glass-ceramics were investigated as an alternate waste form for immobilizing non-fissionable products from used nuclear fuel. Currently, borosilicate glass is the waste form selected for immobilization of this waste stream, however, the low thermal stability and solubility of MoO{sub 3} in borosilicate glass translates into a maximum waste loading in the range of 15-20 mass%. Glass-ceramics provide the opportunity to target durable crystalline phases, e.g., powellite, oxyapatite, celsian, and pollucite, that will incorporate MoO{sub 3} as well as other waste components such as lanthanides, alkalis, and alkaline earths at levels 2X the solubility limits of a single-phase glass. In addition a glass-ceramic could provide higher thermal stability, depending upon the properties of the crystalline and amorphous phases. Glass-ceramics were successfully synthesized at waste loadings of 42, 45, and 50 mass% with the following glass additives: B{sub 2}O{sub 3}, Al{sub 2}O{sub 3}, CaO and SiO{sub 2} by slow cooling form from a glass melt. Glass-ceramics were characterized in terms of phase assemblage, morphology, and thermal stability. The targeted phases: powellite and oxyapatite were observed in all of the compositions along with a lanthanide borosilicate, and cerianite. Results of this initial investigation of glass-ceramics show promise as a potential waste form to replace single-phase borosilicate glass.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2011

DuraLith Alkali-Aluminosilicate Geopolymer Waste Form Testing for Hanford Secondary Waste

The primary objective of the work reported here was to develop additional information regarding the DuraLith alkali aluminosilicate geopolymer as a waste form for liquid secondary waste to support selection of a final waste form for the Hanford Tank Waste Treatment and Immobilization Plant secondary liquid wastes to be disposed in the Integrated Disposal Facility on the Hanford Site. Testing focused on optimizing waste loading, improving waste form performance, and evaluating the robustness of the waste form with respect to waste variability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2011

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2017

Getters for improved technetium containment in cementitious waste forms

A cementitious waste form, Cast Stone, is a possible candidate technology for the immobilization of low activity nuclear waste (LAW) at the Hanford site. This paper focuses on the addition of getter materials to Cast Stone that can sequester Tc from the LAW, and in turn, lower Tc release from the Cast Stone. Two getters which produce different products upon sequestering Tc from LAW were tested: Sn(II) apatite (Sn-A) that removes Tc as a Tc(IV)-oxide and potassium metal sulfide (KMS-2) that removes Tc as a Tc(IV)-sulfide species, allowing for a comparison of stability of the form of Tc upon entering the waste form. The Cast Stone with KMS-2 getter had the best performance with addition equivalent to ~0.08 wt% of the total waste form mass. The observed diffusion (D obs ) of Tc decreased from 4.6 ± 0.2 × 10 -12 cm 2 /s for Cast Stone that did not contain a getter to 5.4 ± 0.4 × 10 -13 cm 2 /s for KMS-2 containing Cast Stone. Finally, it was found that Tc-sulfide species are more stable against re-oxidation within getter containing Cast Stone compared with Tc-oxide and is the origin of the decrease in Tc D obs when using the KMS-2.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Viscosity anomaly of a metallic glass-forming liquid under high pressure

Viscosity, as a critical property closely associated with the glass-forming ability of a liquid, has been extensively studied with varying temperatures. However, its pressure dependence has not been well explored yet due to experimental difficulties. Here, we measured the viscosity of a metallic glass-forming liquid, Zr 46 Cu 37.6 Ag 8.4 Al 8 , at pressures up to 6.1 GPa above the melting points by falling-sphere viscometry with ultrafast synchrotron x-ray imaging. Overall, the viscosity increases with pressure, while surprisingly, there is an abrupt drop between 3.2 GPa and 3.7 GPa, indicating the possible existence of a pressure-induced liquid-to-liquid transition. Pressure could change the short- and medium-range orders in the multicomponent glass-forming liquid, as suggested by the different crystalline outcomes after cooling to room temperature at high- and low-pressure ranges. In conclusion, our work extended the viscosity investigation of metallic glass-forming liquids to the high-pressure regime, which will expand our understanding of liquid-liquid transitions and metallic glass formation.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Tellurite glass as a waste form for a simulated mixed chloride waste stream: Candidate materials selection and initial testing

Tellurite glasses have been researched widely for the last 60 years since they were first introduced by Stanworth. These glasses have been primarily used in research applications as glass host materials for lasers and as non-linear optical materials, though many other uses exist in the literature. Tellurite glasses have long since been used as hosts for various, and even sometimes mixed, halogens (i.e., multiple chlorides or even chlorides and iodides). Thus, it was reasonable to expect that these types of glasses could be used as a waste form to immobilize a combination of mixed chlorides present in the electrochemical separations process involved with fuel separations and processing from nuclear reactors. Many of the properties related to waste forms (e.g., chemical durability, maximum chloride loading) for these materials are unknown and thus, in this study, several different types of tellurite glasses were made and their properties studied to determine if such a candidate waste form could be fabricated with these glasses. One of the formulations studied was a lead tellurite glass, which had a low sodium release and is on-par with high-level waste silicate glass waste forms.

electrochemical↗
DOE OSTI2023

The infinite level normal forms for non-resonant double Hopf singularities

Here, in this paper, we explore hypernormal forms of vector fields that have non-resonant double Hopf singularities with a non-zero radial cubic part. Our primary focus is on investigating the infinite-level normal form classification of this type of singularities. We provide a normal form decomposition in terms of planar-rotating and planar-radial vector fields, which greatly facilitate the pattern recognition and analysis of the corresponding generalized homological maps. Notably, our paper represents the first instance of the normal form classification for general non-resonant double Hopf singularities without structural symmetry.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Nucleon electromagnetic form factors in a hypercentral quark model

We study the nucleon electromagnetic form factors within the frame work of hypercentral quark model. We have calculated nucleon electromagnetic form factors at low Q{sup 2}. We calculate the nucleon form factors using hypercentral wave function. The general nature of the nucleon form factors at low Q{sup 2} is consistent with the experimental results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2013

Measuring the axial form factor of {sup 3}He using weak capture of polarized electrons

A low energy, high intensity polarized electron beam could enable the extraction of the A=3 weak axial form factors F{sub A} using the reaction →e+{sup 3}He→{sup 3}H+ν. These form factors have never been measured before. We discuss the feasibility of such an experiment using a small toroidal magnet and a radial low energy recoil detector to tag the recoil tritons. A moderately high intensity polarized electron beam (>500 μA) with beam energies between 50 - 150 MeV is necessary for the cross section measurement and to provides a free clean measurement of the background. Moreover, in addition to the cross section, by measuring the electron spin and recoil triton correlation coefficient it may be possible to search for second class currents and to extract the ratio of the axial to the vector form factor of the nucleon. Such novel electron scattering based measurements would have a completely different set of systematic uncertainties compared to polarized neutron beta decay, neutrino scattering and muon capture experiments which are typically used to extract the weak form-factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2014

A small-form-factor piezoelectric vibration energy harvester using a resonant frequency-down conversion

While environmental vibrations are usually in the range of a few hundred Hertz, small-form-factor piezoelectric vibration energy harvesters will have higher resonant frequencies due to the structural size effect. To address this issue, we propose a resonant frequency-down conversion based on the theory of dynamic vibration absorber for the design of a small-form-factor piezoelectric vibration energy harvester. The proposed energy harvester consists of two frequency-tuned elastic components for lowering the first resonant frequency of an integrated system but is so configured that an energy harvesting beam component is inverted with respect to the other supporting beam component for a small form factor. Furthermore, in order to change the unwanted modal characteristic of small separation of resonant frequencies, as is the case with an inverted configuration, a proof mass on the supporting beam component is slightly shifted toward a second proof mass on the tip of the energy harvesting beam component. The proposed small-form-factor design capability was experimentally verified using a fabricated prototype with an occupation volume of 20 × 39 × 6.9 mm{sup 3}, which was designed for a target frequency of as low as 100 Hz.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

Analytical evaluation of atomic form factors: Application to Rayleigh scattering

Atomic form factors are widely used for the characterization of targets and specimens, from crystallography to biology. By using recent mathematical results, here we derive an analytical expression for the atomic form factor within the independent particle model constructed from nonrelativistic screened hydrogenic wave functions. The range of validity of this analytical expression is checked by comparing the analytically obtained form factors with the ones obtained within the Hartee-Fock method. As an example, we apply our analytical expression for the atomic form factor to evaluate the differential cross section for Rayleigh scattering off neutral atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Extending the limits of powder diffraction analysis: diffraction parameter space, occupancy defects, and atomic form factors

Although the determination of site occupancies is often a major goal in Rietveld refinement studies, the accurate refinement of site occupancies is exceptionally challenging due to the many correlations and systematic errors that have a hidden impact on the final refined occupancy parameters. Through the comparison of results independently obtained from neutron and synchrotron powder diffraction, improved approaches capable of detecting occupancy defects with an exceptional sensitivity of 0.1% (absolute) in the class of layered NMC Li-ion battery cathode materials have been developed. A new method of visualizing the diffraction parameter space associated with crystallographic site scattering power through the use of f* diagrams is described and this method is broadly applicable to ternary compounds. The f* diagrams allow the global minimum fit to be easily identified and also permit a robust determination of the number and type of occupancy defects within a structure. Through a comparison of neutron and X-ray diffraction results, a systematic error in the synchrotron results was identified using f* diagrams for a series of NMC compounds. Using neutron diffraction data as a reference, this error was shown to specifically result from problems associated with the neutral oxygen X-ray atomic form factor and could be eliminated by using the ionic O 2- form factor for this anion while retaining the neutral form factors for cationic species. The f* diagram method offers a new opportunity to experimentally assess the quality of atomic form factors through powder diffraction studies on chemically related multi-component compounds.

25 ENERGY STORAGE↗
DOE OSTI2024

Experimental evidence for nonspherical magnetic form factor in Ru 3 +

The Mott insulator ..alpha..-RuCl3 has generated great interest in the community due to its possible field-induced Kitaev quantum spin liquid state. Despite enormous effort spent trying to obtain the form of the low-energy Hamiltonian, there is currently no agreed upon set of parameters which is able to explain all of the data. A key piece of missing information lies in the determination of the magnetic form factor of Ru3+, particularly for a true quantitative treatment of inelastic neutron scattering data. Here we present the experimentally derived magnetic form factor of Ru3+ in the low spin 4d5 state using polarized neutron diffraction within the paramagnetic regime on high-quality single crystals of ..alpha..-RuCl3. We observe strong evidence of an anisotropic form factor, expected of the spin-orbit coupled jeff=12 ground state. We model the static magnetization density in increasing complexity from simple isotropic cases, to a multipolar expansion, and, finally, ab initio calculations of the generalized jeff=12 ground state. Comparison of both single ion models and inclusion of Cl- anions support the presence of hybridization of Ru3+ with the surrounding Cl- ligands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Gravitational form factors of nuclei in the Skyrme model

Here, we compute the gravitational form factor D(t) of various nuclei in the generalized Skyrme model where nuclei are described as solitonic field configurations each with a definite baryon number B. We separately discuss the cases B = 1 (nucleons), B = 2 (deuteron), B = 3 (helium-3 and tritium), and extrapolate to larger B-values. Configurations with B > 1 are in general not spherically symmetric, and we demonstrate how group theory helps to extract the form factor. Numerical results are presented for the configurations with B = 1, 2, 3, 4, 5, 6, 7, 8, 32, 108. We find that the B-dependence is consistent with a power-law D(0) ∝ B β with β = 1.7–1.8. Other gravitational form factors can be calculated in the same framework, and we show the result for the J(t) form factor associated with the angular momentum for the B = 3 solution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ Resonance Form Factors from 𝐵→ 𝜋⁢𝜋⁢ℓ⁢$\bar{v}$ in Lattice QCD

The decay 𝐵 → 𝜌⁢ℓ⁢$\bar{v}$ is an attractive process for determining the magnitude of the smallest Cabibbo-Kobayashi-Maskawa matrix element, |𝑉 𝑢⁢𝑏 |, and can provide new insights into the origin of the long-standing exclusive-inclusive discrepancy in determinations of this standard-model parameter. This requires a nonperturbative QCD calculation of the 𝐵 → 𝜌 form factors 𝑉, 𝐴 0 , 𝐴 1 , and 𝐴 12 . The unstable nature of the 𝜌 resonance has prevented precise lattice QCD calculations of these form factors to date. Here, we present the first lattice QCD calculation of the 𝐵 → 𝜌 form factors in which the 𝜌 is treated properly as a resonance in 𝑃-wave 𝜋⁢𝜋 scattering. To this end, we use the Lellouch-Lüscher finite-volume formalism to compute the 𝐵 → 𝜋⁢𝜋 form factors as a function of both momentum transfer and 𝜋⁢𝜋 invariant mass, and then analytically continue to the 𝜌 resonance pole. This calculation is performed with 2 + 1 dynamical quark flavors at a pion mass of approximately 320 MeV, and demonstrates a clear path toward results at the physical point.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Grid-forming Control of Single- and Two-Stage Solar PV Systems with Mode Transition

Legacy power systems once dominated by con-ventional synchronous machines are transitioning into systems driven by fast-acting power-electronic converters that integrate renewable resources. The majority of integrated renewables such as PV and wind bring down system inertia and can cause stability issues due to their volatile nature. The state-of-the-art grid-forming (GFM) control is proven to enhance system inertia and stability in low-inertia systems. However, most of the existing GFM inverters are applied for battery systems, which are much more expensive than PV. Motivated by this, in this paper we propose a holistic grid-forming (GFM) control strategy for PV systems without the need of energy storage. The proposed strategy is developed on the secondary level of the grid-forming control that enables the PV inverter to operate smoothly among islanded, synchronization, GFM, and limited grid-forming (LGF) modes. The practical criteria for determining the operation modes are established and implemented based on the grid operation scenarios. Here, the proposed design is successfully validated by case studies with a laboratory prototype using Siemens Software Defined Inverters.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Interactive Power to Frequency Dynamics Between Grid-Forming Inverters and Synchronous Generators in Power Electronics-Dominated Power Systems

With increased attention on grid-forming inverters as a power system stabilizing device during high shares of inverter-based resource operations, there is a present need for a transparent and methodical investigation of the inverted and direct power to frequency control capabilities and impacts of these devices on emerging power systems. Here, analysis of the frequency dynamics of the droop-controlled grid-forming inverter and the synchronous generator illuminates the inverted active power-frequency relationship and the frequency response order reduction, forming the basis for novel, nonlinear frequency control approaches. Device-level electromagnetic transient domain simulations corroborate the order-reduction findings, establish that a properly designed dc-side system has a negligible impact on power transfer and will not impede frequency regulation, and confirm the primary frequency response improvement with nonlinear control. Simulations of the 9- and 39-bus test systems validate the order reduction and associated decoupling of the nadir and rate of change of frequency in larger networks. Oscillatory mode analysis confirms the grid-forming benefit of increased damping; decreased damping is observed at shares above 80%, but not at 100%. Finally, simulations on a validated Maui power system model with a 96% of inverter-based resources model yield a trend toward a first-order response.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Sequence Impedance Modeling of Grid-Forming Inverters

Grid-forming control of inverter-based resources has been identified as a critical technology for operating power systems with high levels of inverter-based resources. This paper presents the sequence impedance modeling of a grid-forming inverter to evaluate its small-signal stability properties. Droop control structure is implemented to control the inverter in grid-forming mode, and the impact of individual controller on the inverter impedance characteristics is discussed. The developed sequence impedance model is compared with that of the grid-following inverter. It is found from the developed sequence impedance models that grid-forming inverters are less prone to harmonic resonance problems during operation with weaker grids. The developed models are validated using PSCAD simulations.

grid- following inverter↗