Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEEDSTOCKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Investigating the correlation of biomass recalcitrance with pyrolysis oil using poplar as the feedstock

Pyrolysis of five poplar samples with differing degrees of recalcitrance was performed; the correlations between the poplar enzymatic hydrolysis glucose yields and the physicochemical properties of pyrolysis product were studied in this work. Sugar release of five poplar samples varied from 48.1 to 112.3 mg/g for glucose, and 12.0 to 32.4 mg/g for xylose. The yield of pyrolysis products was calculated and the molecular weight distribution of pyrolysis oils was measured by GPC, ranging from 268 to 289 g/mol for its weight-average molecular weight. GC–MS analysis of the bio-oil exhibited a strong correlation between biomass recalcitrance and guaiacyl-type structures in bio-oils. The correlation between biomass recalcitrance and the ratio of syringyl-to-guaiacyl-type-related structures was also assessed. The results from quantitative 31 P NMR indicated some correlation between biomass recalcitrance and the guaiacyl hydroxyl groups in bio-oils. These conclusions illustrate correlations and differences between converting biomass to biofuels via the biological and thermal platform.

09 BIOMASS FUELS↗

An experiment-informed discrete element modelling study of knife milling for flexural biomass feedstocks

A discrete element method (DEM) based approach is used to study the relationships between material attributes (MAs), processing parameters (PPs), and quality attributes (QAs) for the knife milling of maize stalks. An approximate DEM shape model was conceptualized based on real maize stalks and calibrated based on experimental bending test data for flexural properties (elastic bending stiffness, elastic bending angle limit, elastoplastic ratio, etc.). DEM simulations of maize stalk comminution in a Jordan Reduction Solutions (“JRS”) knife mill were performed to investigate the relationships between the MAs (maize stalk size and breakage stress limit), PPs (impeller rotational speed), and QAs (mass throughput and output particle size distribution (PSD)). The DEM results suggest that stalk length has little influence on mass throughput and PSD, whilst stalks with larger cross sections tend to generate larger sizes of milled particles given the same breakage stress limit. Both the DEM and experimental results show that faster impeller rotation (or higher power) does not necessarily generate higher throughput or smaller output PSD, especially for maize stalks of higher breakage stress limit. The correlations between these MAs, PPs and QAs are found highly stochastic, though breakage stress limit dictates mass throughput, regardless of stalk size. The DEM-predicted output particle size tended to match the experimental data with coarse PSDs based on sieve size but showed weakened fidelity with finer material, indicating the potential for further model improvement.

09 BIOMASS FUELS↗

Sustainable co-production of plant lipids and cellulosic sugars from transgenic energycane at an industrially relevant scale: A proof of concept for alternative feedstocks

Development of sustainable and scalable technologies to convert lignocellulosic biomass to biofuels is critical to achieving carbon neutrality. The potential of transgenic bioenergy crops as a renewable source of sugars and lipids has been demonstrated at bench-scale. However, scaling up these processes is important for holistic analysis. Here proof-of-concept for chemical-free hydrothermal pretreatment of transgenic energycane-oilcane line L13 at an industrially relevant scale to recover vegetative lipids along with cellulosic sugars is presented. Here, pilot-scale processing of 97 kg of transgenic energycane-oilcane L13 stems and high solids pretreatment of bagasse enhanced the recovery of cellulosic glucose and xylose by 5-fold as compared to untreated bagasse and helped in the enrichment of vegetative lipids in the biomass residues which allowed its recovery at the end of the bioprocess. Palmitic and oleic acids were the predominant fatty acids (FAs) extracted from stems and leaves. The processing did not affect lipid composition. The efficiency of lipid recovery from untreated biomass was 75.9% which improved to 88.7% upon pretreatment. The vegetative tissues of transgenic energycane-oilcane L13 contained 0.42 metric tons/hectare of lipids. Processing vegetative tissues yielded 0.38 metric tons/hectare of lipids. This approaches an oil yield similar to soybean (global average 0.44 metric tons/hectare) and is almost twice as high as the oil yield from sugarcane engineered to hyperaccumulate lipids (0.20 metric tons/hectare). The study suggests that further optimization by state-of-the-art metabolic engineering and biomass processing can establish transgenic bioenergy crops for commercial drop-in fuel production.

59 BASIC BIOLOGICAL SCIENCES↗

Packing density optimization and recyclability of multi-modal SiC powder feedstocks in binder jet additive manufacturing

Achieving high powder packing density is critical in binder jet additive manufacturing (BJAM), as it directly influences the final part density, mechanical properties, and sintering behavior. Multi-modal powder blends, which combine particles of different sizes, have been explored as a strategy to optimize packing efficiency and minimize defects. In this study, bimodal and trimodal powder blends were obtained by mixing silicon carbide powder in three different sizes. These results show that increased powder density is achievable with bimodal powder blends but is reduced in trimodal blends, and it was found that a 13 % increase in the powder tap density was achieved using a bimodal blend of powder. The powder size distribution of the bimodal blend was measured at various stages during binder jet additive manufacturing and, no measurable powder separation occurred even after eight prints. Altogether, this study shows limited advantage to trimodal powder blends but good promise for bimodal blends for increasing printed density while maintaining reusability in the binder jet process.

Aguirre, Trevor G. [Oak Ridge National Laboratory ↗

Distributed sustainable metals production: opportunities for intensifying separations & alternative feedstocks

Meeting the increased demand for rare earth elements and beyond primary mined ore. Secondary sources like phosphogypsum, coal fly ash, used nuclear fuel, and electronic waste are concentrated sources of critical minerals. One strategy for a resilient supply chain is to decentralize sourcing and hydrometallurgical processing of metals. Rotating packed beds (RPBs) for solid-phase extraction and liquid-liquid extraction are gaining momentum for their ability to increase process throughput by 5-10x the state of the art. In conclusion, this review discusses advances in hydrometallurgical RPB processes and opportunities for implementation in distributed metals production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗