Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Fluidized bed gasification of waste-derived fuels

Five alternative waste-derived fuels obtained from municipal solid waste and different post-consumer packaging were fed in a pilot-scale bubbling fluidized bed gasifier, having a maximum feeding capacity of 100 kg/h. The experimental runs utilized beds of natural olivine, quartz sand or dolomite, fluidized by air, and were carried out under various values of equivalence ratio. The process resulted technically feasible with all the materials tested. The olivine, a neo-silicate of Fe and Mg with an olive-green colour, has proven to be a good candidate to act as a bed catalyst for tar removal during gasification of polyolefin plastic wastes. Thanks to its catalytic activity it is possible to obtain very high fractions of hydrogen in the syngas (between 20% and 30%), even using air as the gasifying agent, i.e. in the most favourable economical conditions and with the simplest plant and reactor configuration. The catalytic activity of olivine was instead reduced or completely inhibited when waste-derived fuels from municipal solid wastes and aggregates of different post-consumer plastic packagings were fed. Anyhow, these materials have given acceptable performance, yielding a syngas of sufficient quality for energy applications after an adequate downstream cleaning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Exploitation of olive mill wastewater and liquid cow manure for biogas production

Co-digestion of organic waste streams is an innovative technology for the reduction of methane/greenhouse gas emissions. Different organic substrates are combined to generate a homogeneous mixture as input to the anaerobic reactor in order to increase process performance, realize a more efficient use of equipment and cost-sharing by processing multiple waste streams in a single facility. In this study, the potential of anaerobic digestion for the treatment of a mixture containing olive mill wastewater (OMW) and liquid cow manure (LCM) using a two-stage process has been evaluated by using two continuously stirred tank reactors (CSTRs) under mesophilic conditions (35 {sup o}C) in order to separately monitor and control the processes of acidogenesis and methanogenesis. The overall process was studied with a hydraulic retention time (HRT) of 19 days. The digester was continuously fed with an influent composed (v/v) of 20% OMW and 80% LCM. The average removal of dissolved and total COD was 63.2% and 50%, respectively. The volatile solids (VS) removal was 34.2% for the examined mixture of feedstocks operating the system at an overall OLR of 3.63 g CODL{sub reactor}{sup -1}d{sup -1}. Methane production rate at the steady state reached 0.91 L CH{sub 4}L{sub reactor}{sup -1}d{sup -1} or 250.9 L CH{sub 4} at standard temperature and pressure conditions (STP) per kg COD fed to the system.

09 BIOMASS FUELS↗

Material and energy recovery in integrated waste management systems: The potential for energy recovery

Highlights: > The amount of waste available for energy recovery is significantly higher than the Unsorted Residual Waste (URW). > Its energy potential is always higher than the complement to 100% of the Source Separation Level (SSL). > Increasing SSL has marginal effects on the potential for energy recovery. > Variations in the composition of the waste fed to WtE plants affect only marginally their performances. > A large WtE plant with a treatment capacity some times higher than a small plant achieves electric efficiency appreciably higher. - Abstract: This article is part of a set of six coordinated papers reporting the main findings of a research project carried out by five Italian universities on 'Material and energy recovery in Integrated Waste Management Systems (IWMS)'. An overview of the project and a summary of the most relevant results can be found in the introductory article of the series. This paper describes the work related to the evaluation of mass and energy balances, which has consisted of three major efforts (i) development of a model for quantifying the energy content and the elemental compositions of the waste streams appearing in a IWMS; (ii) upgrade of an earlier model to predict the performances of Waste-to-Energy (WtE) plants; (iii) evaluation of mass and energy balances of all the scenarios and the recovery paths considered in the project. Results show that not only the amount of material available for energy recovery is significantly higher than the Unsorted Residual Waste (URW) left after Separate Collection (SC), because selection and recycling generate significant amounts of residues, but its heating value is higher than that of the original, gross waste. Therefore, the energy potential of what is left after recycling is always higher than the complement to 100% of the Source Separation Level (SSL). Also, increasing SSL has marginal effects on the potential for energy recovery: nearly doubling SSL (from 35% to 65%) reduces the energy potential only by one fourth. Consequently, even at high SSL energy recovery is a fundamental step of a sustainable waste management system. Variations of SSL do bring about variations of the composition, heating value and moisture content of the material fed to WtE plants, but these variations (i) are smaller than one can expect; (ii) have marginal effects on the performances of the WtE plant. These considerations suggest that the mere value of SSL is not a good indicator of the quality of the waste management system, nor of its energy and environmental outcome. Given the well-known dependence of the efficiency of steam power plants with their power output, the efficiency of energy recovery crucially depends on the size of the IWMS served by the WtE plant. A fivefold increase of the amount of gross waste handled in the IWMS (from 150,000 to 750,000 tons per year of gross waste) allows increasing the electric efficiencies of the WtE plant by about 6-7 percentage points (from 21-23% to 28.5% circa).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Anaerobic digestion of autoclaved and untreated food waste

Highlights: • Autoclaving decreased the formation of NH4-N and H{sub 2}S during food waste digestion. • Stable digestion was achieved with untreated and autoclaved FW at OLR 6 kg VS/m{sup 3}day. • Use of acclimated inoculum allowed very rapid increases in OLR. • Highest CH{sub 4} yields were observed at OLR 3 kg VS/m{sup 3}day with untreated FW. • Autoclaved FW produced highest CH{sub 4} yields during OLR 4 kgVS/m{sup 3}day. - Abstract: Anaerobic digestion of autoclaved (160 °C, 6.2 bar) and untreated source segregated food waste (FW) was compared over 473 days in semi-continuously fed mesophilic reactors with trace elements supplementation, at organic loading rates (OLRs) of 2, 3, 4 and 6 kg volatile solids (VS)/m{sup 3} d. Methane yields at all OLR were 5–10% higher for untreated FW (maximum 0.483 ± 0.013 m{sup 3} CH{sub 4}/kg VS at 3 kg VS/m{sup 3} d) than autoclaved FW (maximum 0.439 ± 0.020 m{sup 3} CH{sub 4}/kg VS at 4 kg VS/m{sup 3} d). The residual methane potential of both digestates at all OLRs was less than 0.110 m{sup 3} CH{sub 4}/kg VS, indicating efficient methanation in all cases. Use of acclimated inoculum allowed very rapid increases in OLR. Reactors fed on autoclaved FW showed lower ammonium and hydrogen sulphide concentrations, probably due to reduced protein hydrolysis as a result of formation of Maillard compounds. In the current study this reduced biodegradability appears to outweigh any benefit due to thermal hydrolysis of ligno-cellulosic components.

09 BIOMASS FUELS↗

Integrated gasification and plasma cleaning for waste treatment: A life cycle perspective

Highlights: • A life cycle assessment of an advanced two-stage process is undertaken. • A comparison of the impacts of the process when fed with 7 feedstock is presented. • Sensitivity analysis on the system is performed. • The treatment of RDF shows the lowest impact in terms of both GWP and AP. • The plasma shows a small contribution to the overall impact of the plant. - Abstract: In the past, almost all residual municipal waste in the UK was landfilled without treatment. Recent European waste management directives have promoted the uptake of more sustainable treatment technologies, especially for biodegradable waste. Local authorities have started considering other options for dealing with residual waste. In this study, a life cycle assessment of a future 20 MWe plant using an advanced two-stage gasification and plasma technology is undertaken. This plant can thermally treat waste feedstocks with different composition and heating value to produce electricity, steam and a vitrified product. The objective of the study is to analyse the environmental impacts of the process when fed with seven different feedstocks (including municipal solid waste, solid refuse fuel, reuse-derived fuel, wood biomass and commercial & industrial waste) and identify the process steps which contribute more to the environmental burden. A scenario analysis on key processes, such as oxygen production technology, metal recovery and the appropriate choice for the secondary market aggregate material, is performed. The influence of accounting for the biogenic carbon content in the waste from the calculations of the global warming potential is also shown. Results show that the treatment of the refuse-derived fuel has the lowest impact in terms of both global warming potential and acidification potential because of its high heating value. For all the other impact categories analysed, the two-stage gasification and plasma process shows a negative impact for all the waste streams considered, mainly due to the avoided burdens associated with the production of electricity from the plant. The plasma convertor, key characteristic of the thermal process investigated, although utilising electricity shows a relatively small contribution to the overall environmental impact of the plant. The results do not significantly vary in the scenario analysis. Accounting for biogenic carbon enhanced the performance of biomass and refuse-derived fuel in terms of global warming potential. The main analysis of this study has been performed from a waste management perspective, using 1 ton of waste as functional unit. A comparison of the results when 1 kWhe of electricity produced is used as functional unit shows similar trends for the environmental impact categories considered.

54 ENVIRONMENTAL SCIENCES↗

Anaerobic digestion of solid agroindustrial waste in semi-continuous mode: Evaluation of mono-digestion and co-digestion systems

Highlights: • Agroindustrial waste were co-digested with an artificial organic fraction. • Variations in organic loading rate and hydraulic retention time were studied. • Sequential feeding of the substrates based on their seasonality was investigated. • Co-digestion resulted in higher methane yields compared with mono-digestion. • Applying sequential feeding led to a more equilibrated system operation. - Abstract: The present study aimed at investigating the anaerobic digestion of four agroindustrial waste, namely cotton gin waste, winery waste, olive pomace and juice industry waste, in semi-continuous mode, conducting mono-digestion and co-digestion assays, using an artificial organic fraction sample as co-substrate. These assays were divided into two groups, in which different conditions were applied. Group I investigated the variation in two operational parameters, i.e. the organic loading rate (OLR) and the hydraulic retention time (HRT), while in Group II, the assays were fed with different substrates in a sequential order. Results showed more elevated specific methane yields for co-digestion assays compared with mono-digestion assays. Maximum yields were achieved at an OLR of 1.0 gVS/(L·d) and a HRT reduced to half of the initial. Further reduction of the HRT coupled to an increase of the OLR generally caused a significant decrease of specific methane yields, as well as one case of severe overloading, i.e. the mono-digestion of juice industry waste, which resulted in instability and ultimately system failure. Sequential feeding with different substrates led to a more equilibrated operation, especially for co-digestion systems, with higher specific methane yields being observed during the phases corresponding to winery waste and juice industry waste substrates. Overall more positive results were obtained in the cases in which the latter substrates were fed to the reactors at process startup.

09 BIOMASS FUELS↗

Anaerobic co-digestion of sugarcane press mud with vinasse on methane yield

Highlights: • Press mud and vinasse co-digestion was investigated. •Methane yield during co-digestion was 64% higher to mono-digestion. • Press mud and vinasse co-digestion increased process stability. - Abstract: The conversion efficiency of high solids waste digestion as sugarcane press mud (P) may be limited due to hydrolysis step. The option of co-digestion with vinasse, main liquid waste generated from ethanol production, was investigated under batch regime at mesophilic conditions (37.5 ± 1 °C) and the best mixture was evaluated under semicontinuous regime in stirred-tank reactors. The maximum values for methane yield in batch tests were for V{sub 75}/P{sub 25} and V{sub 50}/P{sub 50} mixtures (on basis of the chemical oxygen demand (COD) percentage added in the mixture), with an average value of 246 N mL CH{sub 4} g{sup −1} COD{sub fed}, which was 13% higher than that of press mud alone. A highest methane production rate of 69.6 N mL CH{sub 4} g{sup −1} COD{sub fed}{sup −1} d{sup −1} was obtained for the mixtureV{sub 75}/P{sub 25}. During the experiment carried out in CSTR reactors, the organic loading rate (OLR) was increased from 0.5 up to 2.2 g VS L{sup −1} d{sup −1}. Methane yields of 365 L CH{sub 4} kg{sup −1} VS and biogas productivities of 1.6 L L{sup −1} were obtained in co-digestion, which was 64% higher in comparison to mono-digestion. The performance of the process in mono-digestion was less stable than in co-digestion, with a significant fall of methane yield to 1.8 kg VS m{sup −3} d{sup −1}, and a partial inhibition of the methanogenic archaeas when the OLR was increased up to 2.2 kg VS m{sup −3} d{sup −1}. The co-digestion of vinasse with press mud is a good option for the treatment of streams at the alcohol-sugar industry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparison of the acidogenic and methanogenic potential of agroindustrial residues

Highlights: • Mixed acidogenic fermentation shows lower yields but higher product value than methanogenesis. • VFA concentrations reported are among the highest in literature for batch acidogenic fermentation. • Trub is an attractive residue for valorisation due to the potential for caproic acid production. • Brewery residues have a significant economic potential. - Abstract: The methanogenic and acidogenic potentials of six different agroindustrial residues, i.e. of fruit pulps and brewery residues, were determined. For all substrates, the methanogenic conversion yield was systematically higher than the acidogenic one in Chemical Oxygen Demand (COD) terms, ranging from 0.46 to 0.87 g{sub COD{sub CH4}}/{sub gCOD{sub substrate{sub fed}}} and from 0.24 to 0.56 g{sub COD{sub tVFA}}/g{sub COD{sub substrate{sub fed}}}, respectively. During methanogenic conversion, brewery trub exhibited the highest methane potential (304 ml{sub CH4}/g{sub COD{sub substrate}}). Trub also exhibited the highest total volatile fatty acids (tVFA) concentrations in the mixed liquor (ML) during acidogenic conversion (29.7 g{sub COD{sub tVFA}}/kg{sub ML}). Acetic, butyric and caproic acids were the main carboxylates produced by the different substrates. Despite the lower conversion yields, the economic value of the acidogenic product (carboxylate streams) is higher than that of methanogenic conversion (methane) due to the higher value of carboxylates and their potential use in finer applications (e.g. bio-based products) compared to energy production form methane.

09 BIOMASS FUELS↗

Vitamin A deficiency induces endoplasmic reticulum stress and apoptosis in pancreatic islet cells: Implications of stearoyl-CoA desaturase 1-mediated oleic acid synthesis

Highlights: • For first time, here we report the possible underlying mechanism of vitamin A deficiency- induced pancreatic dysfunction. • Vitamin A deficiency altered the architecture and impaired the functions of pancreas. • Further, it increased the endoplasmic reticulum stress and reduced the SCD1-mediated monounsaturated fatty acid; oleic acid. • All these changes, possibly resulted in increased pancreatic islet cell death and thus decreased plasma insulin and glucagon levels. Previously, we reported that vitamin A deficiency resulted in the reduction of stearoyl-CoA desaturase 1 (SCD1) and monounsaturated fatty acid (MUFA) levels, which corroborated with attenuation of high fructose-induced hepatic steatosis. Here, we aimed at assessing the effect of vitamin A deficiency on SCD1, MUFA levels and their impact on pancreas’ structure and functions. Male weanling Wistar rats fed one of the four diets, namely control (Con), vitamin A-deficient (VAD), highfructose (HFr) and vitamin A-deficient diet with highfructose (VADHFr) for 16 weeks period. Compared to the control, feeding of VAD diet (alone or with HFr) resulted in pancreatic intra-islet vessel dilation and reduced plasma insulin, glucagon and C-peptide levels, however, glucose levels decreased only in VADHFr group. In line with plasma levels, VAD diet-fed animals displayed lower immunostaining for insulin and glucagon, which corroborated with increased apoptotic staining observed in the islet regions, possibly due to increased cellular stress, as indicated by high immunostaining for endothelial nitric oxide synthase (eNOS) and CCAAT/Enhancer-binding protein homologues protein (CHOP). On the other hand, it significantly decreased the SCD1 protein, which corroborated with reduced MUFA levels, particularly, oleic acid (C18:1), when compared to the control and HFr groups. In conclusion, chronic vitamin A deficiency altered the structure and functions of pancreas by diminishing the islet cells, possibly by inducing cellular stress-mediated apoptosis and decreasing SCD1-mediated oleic acid (C18:1) synthesis. Thus, the data suggest that unlike liver, the reduction in SCD1 and MUFA levels in the pancreas exerts deleterious effects on its functions and perturb the overall cellular metabolism.

60 APPLIED LIFE SCIENCES↗

Silencing of RSPO1 mitigates obesity-related renal fibrosis in mice by deactivating Wnt/β-catenin pathway

Highlights: • Renal RSPO1 expression was increased in mice fed on high-fat diet for 12 weeks. • Silencing RSPO1 remitted kidney dysfunction and renal fibrosis in obesity mice. • Silencing RSPO1 inhibited LGR4 expression and Wnt/β-catenin pathway activation. • RSPO1/LGR4 axis was involved in obesity-related renal fibrosis. Obesity, a global epidemic, is one of the critical causes of chronic kidney disease (CKD). R-spondin1 (RSPO1) possessing the potential to activate Wnt/β-catenin pathway was reported to be elevated in circulation of obesity objects. However, the function of RSPO1 and the latent mechanism in obesity-related CKD are still left to be revealed. In the present study, renal RSPO1 expression was increased in mice fed on high-fat diet (HFD) for 12 weeks. Lentivirus-mediated RSPO1 knockdown partly recovered obesity-related metabolic symptoms, while distinctly remitted kidney dysfunction and renal fibrosis in obesity mice. In vitro, recombinant RSPO1 was found to elevate leucine-rich repeat-containing G protein coupled receptor 4 (LGR4) expression, promote Wnt/β-catenin signaling pathway activation, facilitate epithelial-mesenchymal transition (EMT) and increase collagen deposition in HK2 renal tubular cells. Such pro-fibrotic effect of RSPO1 was diminished by LGR4 siRNA in HK2 cells. In summary, we demonstrate that RSPO1/LGR4 axis is involved in obesity-related renal fibrosis at least through activating Wnt/β-catenin signaling pathway, providing a potential therapeutic target for this disease.

60 APPLIED LIFE SCIENCES↗

Fatty acid binding protein 3 deficiency limits atherosclerosis development via macrophage foam cell formation inhibition

Highlights: • We firstly indicated that FABP3 was highly expressed in the aorta of HFD-fed ApoE{sup −/-} mice. • Silencing FABP3 attenuated atherosclerosis due to inhibited macrophage foam cell formation. • FABP3 knockdown decreased foamy macrophage formation partly by inhibiting the PPARγ signal pathway. Atherosclerosis is the underlying contributing factor of cardiovascular disease, which is a process of inflammation and lipid-rich lesion. Macrophage-derived foam cell is a key hallmark of atherosclerosis and connected with various factors of lipid metabolism. Here, we showed that fatty acid binding protein 3 (FABP3) was upregulated in the aorta of ApoE{sup −/-} mice with high-fat-diet (HFD) feeding. Knockdown of FABP3 in HFD-fed ApoE{sup −/-} mice notably facilitated cholesterol efflux, inhibited macrophage foam cell formation, and thus prevented atherogenesis. Furthermore, FABP3 silencing decreased the expression of peroxisome proliferator-activated receptor γ (PPARγ). Mechanistic studies had disclosed the involvement of PPARγ signaling in balancing cholesterol uptake and efflux and diminishing foam cell formation. These findings firstly revealed an anti-atherogenic role of FABP3 silencing in preventing foamy macrophage formation partly through PPARγ, which might be a beneficial approach for therapying atherosclerosis.

60 APPLIED LIFE SCIENCES↗

A metabolic engineering strategy for producing poly-(3-hydroxyoctanoic acid) in Escherichia coli from glycerol

Poly(3-hydroxyoctanoate) (PHO) is a medium-chain-length PHA with low crystallinity and high elongation to break ratio, unlike the brittle short-chain-PHAs like PHB. These properties make PHO a promising candidate for industrial and biomedical applications. In this paper, we demonstrated the production of PHO in Escherichia coli from a renewable and inexpensive glycerol feedstock by engineering fatty acid synthesis and β-oxidation to create a pool of 2,3-octenoyl-CoAs. In this base strain, E. coli ΔfadRABIJ, an (R)-specific enoyl-CoA hydratase (phaJ) and a PHA synthase (phaC) were expressed to produce PHO. Bioprospecting phaJ and phaC homologs from Pseudomonas aeruginosa and fadD homolog from Pseudomonas putida implicated a combination of phaJ2, phaC2, and Pp fadD genes yielded the highest PHO content from exogenously fed octanoate. Finally, when a single copy of a previously described C 8 -specific thioesterase mutant CpFatB1.2-M4-287 was integrated into the chromosome of E. coli ΔfadRABIJ, the resulting E. coli strain NHL18 was capable of producing 3.69 ± 0.146 g/L of octanoic acid. Subsequently, the integration of PHA synthesis genes in NHL18 resulting in strain SM23 allowed the cell to accumulate 15 % cell dry weight of PHO with a final titer of 1.54 ± 0.234 g/L from glycerol in fed-batch fermentation.

Biodegradable plastic↗

Low-Temperature Electrochemical Upgrading of Bio-oils Using Polymer Electrolyte Membranes

While bio-oil-derived fuels hold much promise as a replacement for petroleum, transformation of the highly oxygenated mixture has proven challenging. In particular, bio-oils are reactive and difficult to upgrade through catalytic pyrolysis. To reach a stabilized product capable of deep deoxygenation at elevated pressure and temperature, conversion or separation of reactive groups is required. This paper describes an electrochemical process for stabilization and upgrading of bio-oils prior to hydrotreating at high pressure and temperature. This electrolytic process uses a three-compartment cell designed to hydrogenate reactive carbonyl components while separating small acid molecules, such as acetic and formic acids, which act as catalysts for condensation reactions and consume hydrogen gas to produce low-value gases in hydrotreating. To avoid conductivity issues, electrodes are appended to anion- and cation-exchange membranes. The cell was tested using a mixed acetic acid and formic acid surrogate fed to the cathode compartment, where the decrease in the concentration followed the applied charge to the cell. Experiments performed using pine pyrolysis oil demonstrated a significant reduction in the total acid number (TAN), an increase in pH from 2.6 to over 4, and a modest reduction of the carbonyl concentration. Analysis showed the reduction in TAN was primarily due to removal of carboxylic compounds. Experiments observed a decrease in the reactive carbonyl (aldehydes and ketones) concentration that followed applied charge. The results with the newly devised reactor show promise for the electrochemical route for upgrading bio-oils, but significant improvements in TAN removal and carbonyl conversion are needed. Given the distributed nature of biomass, an electrochemical process paired with pyrolysis could be used to densify and stabilize an oil product near the source. The densified liquid could then be shipped to centralized refineries for final upgrading to fuel and/or chemical products.

Lister, Tedd↗

Genome-Resolved Meta-Omics Ties Microbial Dynamics to Process Performance in Biotechnology for Thiocyanate Degradation

Remediation of industrial wastewater is important for preventing environmental contamination and allowing water reuse. Biological treatment for one industrial contaminant, thiocyanate (SCN - ), relies upon microbial hydrolysis, but this process is sensitive to high loadings. To examine the activity and stability of a microbial community over increasing SCN - loadings, we established and operated a continuous-flow bioreactor fed increasing loadings of SCN - . A second reactor was fed ammonium sulfate to mimic breakdown products of SCN - . Biomass was sampled from both reactors for metagenomics and metaproteomics, yielding a set of genomes for 144 bacteria and one rotifer that constituted the abundant community in both reactors. We analyzed the metabolic potential and temporal dynamics of these organisms across the increasing loadings. In the SCN - reactor, Thiobacillus strains capable of SCN - degradation were highly abundant, whereas the ammonium sulfate reactor contained nitrifiers and heterotrophs capable of nitrate reduction. Key organisms in the SCN - reactor expressed proteins involved in SCN - degradation, sulfur oxidation, carbon fixation, and nitrogen removal. Lower performance at higher loadings was linked to changes in microbial community composition. This work provides an example of how meta-omics can increase our understanding of industrial wastewater treatment and inform iterative process design and development.

60 APPLIED LIFE SCIENCES↗

A High-Quality Genome-Scale Model for Rhodococcus opacus Metabolism

Rhodococcus opacus is a bacterium that has a high tolerance to aromatic compounds and can produce significant amounts of triacylglycerol (TAG). Here, we present iGR1773, the first genome-scale model (GSM) of R. opacus PD630 metabolism based on its genomic sequence and associated data. The model includes 1773 genes, 3025 reactions, and 1956 metabolites, was developed in a reproducible manner using CarveMe, and was evaluated through Metabolic Model tests (MEMOTE). We combine the model with two Constraint-Based Reconstruction and Analysis (COBRA) methods that use transcriptomics data to predict growth rates and fluxes: E-Flux2 and SPOT (Simplified Pearson Correlation with Transcriptomic data). Growth rates are best predicted by E-Flux2. Flux profiles are more accurately predicted by E-Flux2 than flux balance analysis (FBA) and parsimonious FBA (pFBA), when compared to 44 central carbon fluxes measured by 13C-Metabolic Flux Analysis (13C-MFA). Under glucose-fed conditions, E-Flux2 presents an R2 value of 0.54, while predictions based on pFBA had an inferior R2 of 0.28. We attribute this improved performance to the extra activity information provided by the transcriptomics data. For phenol-fed metabolism, in which the substrate first enters the TCA cycle, E-Flux2’s flux predictions display a high R2 of 0.96 while pFBA showed an R2 of 0.93. We also show that glucose metabolism and phenol metabolism function with similar relative ATP maintenance costs. These findings demonstrate that iGR1773 can help the metabolic engineering community predict aromatic substrate utilization patterns and perform computational strain design.

Roell, Garrett W.↗

Improving process performances in coal gasification for power and synfuel production

This paper is aimed at developing process alternatives of conventional coal gasification. A number of possibilities are presented, simulated, and discussed in order to improve the process performances, to avoid the use of pure oxygen, and to reduce the overall CO{sub 2} emissions. The different process configurations considered include both power production, by means of an integrated gasification combined cycle (IGCC) plant, and synfuel production, by means of Fischer-Tropsch (FT) synthesis. The basic idea is to thermally couple a gasifier, fed with coal and steam, and a combustor where coal is burnt with air, thus overcoming the need of expensive pure oxygen as a feedstock. As a result, no or little nitrogen is present in the syngas produced by the gasifier; the required heat is transferred by using an inert solid as the carrier, which is circulated between the two modules. First, a thermodynamic study of the dual-bed gasification is carried out. Then a dual-bed gasification process is simulated by Aspen Plus, and the efficiency and overall CO{sub 2} emissions of the process are calculated and compared with a conventional gasification with oxygen. Eventually, the scheme with two reactors (gasifier-combustor) is coupled with an IGCC process. The simulation of this plant is compared with that of a conventional IGCC, where the gasifier is fed by high purity oxygen. According to the newly proposed configuration, the global plant efficiency increases by 27.9% and the CO{sub 2} emissions decrease by 21.8%, with respect to the performances of a conventional IGCC process. 29 refs., 7 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Physical Controls on the Hydrology of Perennially Ice-Covered Lakes, Taylor Valley, Antarctica (1996–2013)

The McMurdo Dry Valleys, Antarctica, are a polar desert populated with numerous closed-watershed, perennially ice-covered lakes primarily fed by glacial melt. Lake levels have varied by as much as 8 m since 1972 and are currently rising after a decade of decreasing. Precipitation falls as snow, so lake hydrology is dominated by energy available to melt glacier ice and to sublimate lake ice. To understand the energy and hydrologic controls on lake level changes and to explain the variability between neighboring lakes, only a few kilometers apart, we model the hydrology for the three largest lakes in Taylor Valley. Here, we apply a physically based hydrological model that includes a surface energy balance model to estimate glacial melt and lake sublimation to constrain mass fluxes to and from the lakes. Results show that lake levels are very sensitive to small changes in glacier albedo, air temperature, and wind speed. We were able to balance the hydrologic budget in two watersheds using meltwater inflow and sublimation loss from the ice-covered lake alone. A third watershed, closest to the coast, required additional inflow beyond model uncertainties. We hypothesize a shallow groundwater system within the active layer, fed by dispersed snow patches, contributes 23% of the inflow to this watershed. The lakes are out of equilibrium with the current climate. If the climate of our study period (1996–2013) persists into the future, the lakes will reach equilibrium starting in 2300, with levels 2–17 m higher, depending on the lake, relative to the 2020 level.

58 GEOSCIENCES↗