Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXAFS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Fe(II)- and Sulfide-Facilitated Reduction of 99Tc(VII)O4- in Microbially Reduced Hyporheic Zone Sediments

Redox-reactive, biogeochemical phases generated by reductive microbial activity in hyporheic zone sediments from a dynamic groundwater-river interaction zone were evaluated for their ability to reduce soluble pertechnetate [99Tc(VII)O4-] to less soluble Tc(IV). The sediments were bioreduced by indigenous microorganisms that were stimulated by organic substrate addition in synthetic groundwater with or without sulfate. In most treatments, 20 µmol L-1 initial aqueous Tc(VII) was reduced to near or below detection (3.82×10-9 mol L-1) over periods of days to months in suspensions of variable solids concentrations. Native sediments containing significant lithogenic Fe(II) in various phases were, in contrast, unreactive with Tc(VII). The reduction rates in the bioreduced sediments increased with increases in sediment mass, in proportion to weak acid-extractable Fe(II) and sediment-associated sulfide (AVS). The rate of Tc(VII) reduction was first order with respect to both aqueous Tc(VII) concentration and sediment mass, but correlations between specific reductant concentrations and reaction rate were not found. X-ray microprobe measurements revealed a strong correlation between Tc hot spots and Fe-containing mineral particles in the sediment. However, only a portion of Fe-containing particles were Tc-hosts. The Tc-hot spots displayed a chemical signature (by EDXRF) similar to pyroxene. The application of autoradiography and electron microprobe allowed further isolation of Tc-containing particles that were invariably found to be ca 100 µm aggregates of primary mineral material embedded within a fine-grained phyllosilicate matrix. EXAFS spectroscopy revealed that the Tc(IV) within these were a combination of a Tc(IV)O2-like phase and Tc(IV)-Fe surface clusters, with a significant fraction of a TcSx-like phase in sediments incubated with SO42-. AVS was implicated as a more selective reductant at low solids concentration even though its concentration was below that required for stoichiometric reduction of Tc(VII). These results demonstrate that composite mineral aggregates may be redox reaction centers in coarse-textured hyporheic zone sediments regardless of the dominant anoxic biogeochemical processes.

Environmental Molecular Sciences Laboratory↗

Effect of biofilm coatings at metal-oxide/water interfaces I: Pb(II) and Zn(II) partitioning and speciation at Shewanella oneidensis /metal-oxide/water interfaces

Microbial biofilms are often present as coatings on metal-oxide surfaces in natural and industrial environments and may induce significant changes in the partitioning behavior and speciation of aqueous metal ions, which in turn can impact their transport and fate. In this study, long-period X-ray standing wave-fluorescence yield (LP-XSW-FY) spectroscopy was used to measure under in situ conditions the partitioning of aqueous Pb(II) and Zn(II) between multilayer Shewanella oneidensis MR-1 biofilms and highly polished, oriented single-crystal surfaces of α-Al 2 O 3 and α-Fe 2 O 3 as a function of metal-ion concentration and time at pH 6.0. We show that after 3-h exposure time, Pb(II) binds preferentially to the alpha-Al 2 O 3 (1-102) and α-Fe 2 O 3 (0001) surfaces at low Pb concentration ([Pb] = 10 –7 M) and then increasingly partitions into the biofilm coatings at higher concentrations (10 –6 to 10 –4 M). In contrast, Zn(II) partitions preferentially into the biofilm coating for both surfaces at all Zn concentrations studied (10 –7 to 10 –4 M). In comparison, the α-Al 2 O 3 (0001) surface has a low affinity for both Pb(II) and Zn(II), and the biofilm coatings are the dominant sink for both ions. These findings suggest that in the presence of S. oneidensis biofilm coatings, α-Al 2 O 3 (0001) is the least reactive surface for Pb(II) and Zn(II) compared to α-Al 2 O 3 (1-102) and α-Fe 2 O 3 (0001). They also show that Zn(II) has a lower affinity than Pb(II) for reactive sites on α-Al 2 O 3 (1-102) and α-Fe 2 O 3 (0001) at [Me(II)] of 10 –7 M; at 10 –5 M, the bulk of the metal ions partition into the biofilm coatings. At longer exposure times (20-24 h), both Pb(II) and Zn(II) increasingly partition to the metal-oxide surfaces at [Me(II)] = 10 –5 M and pH 6.0, indicating possible reaction/diffusion-controlled sorption processes. Pb L-III-edge and Zn K-edge grazing-incidence extended X-ray absorption fine structure (GI-EXAFS) measurements suggest that both Pb(II) and Zn(II) ions may be complexed by carboxyl groups in S. oneidensis biofilms after 3-h exposure at pH 6.0 and [Me(II)] = 10 –5 M. In contrast with Burkholderia cepacia, which was used in our previous studies of monolayer biofilm-coated metal-oxide surfaces (Templeton et al., 2001), S. oneidensis MR-1 forms relatively thick biofilm coatings (6-20 μm) that are rich in reactive functional groups and are expected to dominate metal-ion adsorption. Lastly, our results show that even thick and highly reactive biofilms like S. oneidensis do not cause much change in the intrinsic chemical reactivities of the underlying metal-oxide surfaces with respect to aqueous Pb(II) and Zn(II) and don't block reactive sites on the metal-oxide surfaces; instead they reduce the rate of Pb(II) and Zn(II) sorption onto these surfaces.

58 GEOSCIENCES↗

Formation and redox reactivity of ferrihydrite-organic carbon-calcium co-precipitates

Complexation with minerals plays a critical role in regulating the stability of organic matter. The presence of cations is assumed to be important for the complexation between organic matter and minerals, but there is still limited direct analysis for the formation and reactivity of mineral-organic matter-cation ternary complexes, as well as governing factors for the fate of minerals and organic matter in the complexes. In order to close this knowledge gap, we investigated the formation and reactivity of ferrihydrite (Fh)-organic carbon (OC)-calcium (Ca) ternary co-precipitates. We performed microbial anaerobic Fe reduction using Shewanella putrefaciens CN32 on synthesized Fh-OC-Ca co-precipitates and characterized OC and Fe minerals using various spectroscopic and wet chemistry techniques. We discovered that Ca incorporated into the co-precipitate was a function of OC/iron (Fe) ratio, but OC incorporation was not impacted by the Ca content. During the reduction, the presence of Ca favored the formation of green rust but decreased the formation of magnetite and siderite in co-precipitates with high OC content. The reduction of Fe and reductive release of Fe-bound OC were controlled primarily by the C/Fe ratio, rather than Ca/Fe ratio. Phenolic OC was preferentially released or degraded during the reduction compared to aromatic and carboxylic OC. Collectively, C/Ca incorporation data, Fe K-edge extended X-ray absorption fine structure (EXAFS) analysis for co-precipitates before and after reduction, and the reductive release of Ca and OC suggest the formation of Fh-OC-Ca ternary co-precipitates, likely with OC as bridges. The reduction of Fe and reductive release of OC were primarily controlled by the C/Fe ratio, whereas the presence of Ca affected the mineral phase transformation for Fh during the reduction of Fe. Thus, our results provide novel understanding for the formation and reactivity of Ca-based ternary co-precipitates, which can be valuable for building up process-based models for cycles of carbon and metals.

54 ENVIRONMENTAL SCIENCES↗

Macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite with the effects of dissolved carbonates under anoxic conditions

Manganese and its compounds have been extensively researched because of their far-reaching roles in a wide range of biogeochemical processes in natural systems. The (ad)sorption behavior of Mn(II), however, is poorly understood despite its important role as the primary reaction step for surface-catalyzed Mn(II) oxidation that is the principal abiotic process forming various Mn (oxyhydr)oxides in nature. Here, we systematically examined Mn(II) (ad)sorption to one of the most common natural sorbents, goethite, in oxygen- and carbonate-free systems. Traditional sorption edge and isotherm experiments were conducted by varying sorbate-to-sorbent ratio (0.027–15 μmol∙m -2 ) and solution pH (pH 5.0–9.0). The effects of dissolved carbonates on Mn(II) sorption were also assessed in a range of naturally prevalent concentrations (0.5–10 mM NaHCO 3 ). The Mn(II) uptake on goethite followed a typical Langmuir isotherm in the absence of dissolved carbonates, with increasing maximum adsorption capacities (Γ max ) from 0.19 at pH 6.5 to 3.4 μmol∙m -2 at pH 9.0. The presence of dissolved carbonates raised the extent of Mn(II) adsorption, which appeared to be directly correspondent to that of the adsorption of dissolved carbonates. Extended X-ray absorption fine structure (EXAFS) analysis indicated that Mn(II) predominantly formed inner-sphere binuclear bidentate surface complexes. Mn(II) uptake became deviated from the Langmuir model and showed a clear indication of surface precipitation when the Mn(II) sorption density (Γ) exceeded a threshold value in a given solution composition. This secondary Mn(II) phase was identified as rhodochrosite using X-ray diffraction (XRD) and transmission electron microscope (TEM). Furthermore, it would be plausible that a minor fraction of adsorbed Mn(II) coexisted with the secondary rhodochrosite according to a linear combination fitting (LCF) of the X-ray absorption near edge structure (XANES) spectra of Mn reference and samples. These systematic investigations of the macroscopic and microscopic behaviors of Mn(II) (ad)sorption to goethite provide a critical avenue for disentangling surface-catalytic Mn(II) oxidation processes, which ultimately lead to the formation of diverse Mn (oxyhydr)oxides in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Changing chemistry of particulate manganese in the near- and far-field hydrothermal plumes from 15°S East Pacific Rise and its influence on metal scavenging

Dissolved Mn(II) in the hydrothermal plume is known to be microbially oxidized to form Mn(III/IV) oxides, and the Mn oxides scavenge other trace elements in seawater. In the GEOTRACES GP16 cruise, dissolved Mn (dMn) and particulate Mn (pMn) were found to be transported over 4000 km westwards from the Southern Eastern Pacific Rise. Previous studies in this plume showed different removal rates of dMn and pMn as well as pMn size distribution between the near-field (<80 km from the ridge axis) and far-field (>80 km) plumes. In order to understand Mn cycling in these plumes, spatial distribution, oxidation states, and mineral structures of Mn in small size fraction (SSF; 0.8–51 μm) and large size fraction (LSF; >51 μm) particles from the near-field and far-field plumes were examined using micro X-ray fluorescence spectrometry (μ-XRF), X-ray absorption near-edge structure spectroscopy (XANES), chemical species mapping, and extended X-ray absorption fine-structure spectroscopy (EXAFS). In the near-field plume, pMn in the SSF is dominated by oxidized Mn with Mn(III) fractions of ~30%. They are a mixture of δ-MnO 2 and triclinic birnessites that is known to be formed as a result of autocatalytic Mn(II) oxidation at the surface of freshly-formed δ-MnO2, suggesting that both microbial and autocatalytic Mn oxidation occur in the near-field plume. The LSF pMn in the near-field plume is also oxidized and often found in large aggregates several hundreds of μm in size. These aggregates settle out in the near-field and during transport, and are not found in the far-field plume. In the far-field plume where Mn oxides are not newly formed, pMn in the SSF is oxidized, but their Mn(III) fractions are smaller than in the near-field pMn. Unlike the SSF, the far-field plume LSF pMn is dominated by reduced Mn, implying very slow aggregation of pMn in the far-field plume. The different characteristics of pMn between the near-field and far-field plumes affect its scavenging of other trace elements. In the near-field plume, Co, Mo, 231 Pa are associated with pMn, but not in the far-field plume. 231 Pa is adsorbed to pFe rather than pMn in the far-field plume, and Pb is adsorbed to pFe in the entire plume. The result shows that freshly-formed Mn oxides in the near-field plume have higher scavenging capacity than the far-field plume pMn. Our findings suggest that the mineralogical age of Mn oxides may be an important parameter that controls the scavenging of many other trace elements and isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consistent Controls on Trace Metal Micronutrient Speciation in Wetland Soils and Stream Sediments

Trace metal are essential for microbially-mediated biogeochemical processes occurring in anoxic wetland soils and stream bed sediments, but low availability of these elements may inhibit anaerobic element cycling and transformations. Solid-phase speciation is likely a critical control on trace metal availability but has seen limited study in anoxic systems having concentrations similar to geological background levels, where metal limitations may be most prevalent. We have investigated trace metal concentrations and solid-phase speciation in three freshwater subsurface aquatic systems: marsh wetland soils, riparian wetland soils, and the sediments of a streambed. These systems displayed low solid-phase trace metal concentrations, generally at or below geological background levels, which generally followed the trend Zn > Cu ≈ Ni > Co and showed no correlation with major element compositions. All soils and sediments were dominated by quartz but varied in clay mineralogy as well as the organic matter, total sulfur, and total iron contents. X-ray absorption near-edge structure (XANES) spectroscopy shows that sulfur speciation in both wetlands is dominated by organic sulfur. Elemental sulfur and iron sulfides together made up <25% of the sulfur in the wetland soils, but the distribution between inorganic and organic forms was reversed in the stream sediments. Ferrous and ferric iron in clay minerals were common species identified by both XANES and extended X-ray absorption fine structure (EXAFS) spectroscopies at all sites. Iron(III) oxides were substantial components in all but the marsh wetland soils. Quantitative analysis of copper, nickel, and zinc XANES spectra revealed similar metal speciation across all sites. Copper speciation was dominated by sulfides, adsorbed species, and minor amounts of copper bound to organic matter; no metallic copper was detected. Nickel speciation also varied little and was dominated by nickel in clay mineral octahedral sheets and nickel sulfide, with adsorbed species also present. Zinc speciation was slightly more varied, with the marsh wetland soils and stream bed sediments containing adsorbed species, zinc associated with clay mineral structures, and zinc bound to reduced sulfur groups on organic matter, whereas the riparian wetland soils lacked clay-associated zinc but contained zinc sulfide. Trace metals bound to reduced sulfur occurred at every site, with a greater sulfur-bound fraction for copper. The fractional abundance of sulfur-bound species showed no relationship with soil or sediment total sulfur content, which varied by two orders of magnitude. More broadly, the observations in this study suggest that trace metal speciation in freshwater wetland soils and stream sediments is consistently dominated by a small set of recurring components which are distinct for each metal. Furthermore, this may represent a general geochemical phenomenon in anoxic soils and sediments containing trace metals at background concentrations (as low as 3 µg g -1 ) that was not predicted from systems that are contaminated with or naturally-enriched in copper, nickel, or zinc.

54 ENVIRONMENTAL SCIENCES↗

Structural and Crystal Chemical Properties of Alkali Rare-earth Double Phosphates

When appropriately activated, alkali rare-earth double phosphates of the form: M 3 RE(PO 4 ) 2 (where M denotes an alkali metal and RE represents either a rare-earth element or Y or Sc) are of interest for use as inorganic scintillators for radiation detection at relatively long optical emission wavelengths. These compounds exhibit layered crystal structures whose symmetry properties depend on the relative sizes of the rare-earth and alkali-metal cations. Single-crystal X-ray and powder neutron diffraction methods were used here to refine the structures of the series of rare-earth double phosphate compounds: K 3 RE(PO 4 ) 2 with RE = Lu, Er, Ho, Dy, Gd, Nd, Ce, plus Y and Sc - as well as the compounds: A 3 Lu(PO 4 ) 2 , with A = Rb, and Cs. The double phosphate K 3 Lu(PO 4 ) 2 was reported and structurally refined previously. This material had a hexagonal unit cell at room temperature with the Lu ion six-fold coordinated with oxygen atoms of the surrounding phosphate groups. Additionally two lower-temperature phases were observed for K 3 Lu(PO 4 ) 2 . The first phase transition to a monoclinic P21/m phase occurred at ~230 K, and the Lu ion retained its six-fold coordination. The second K 3 Lu(PO 4 ) 2 phase transition occurred at ~130 K. The P21/m space group symmetry was retained, however, one of the phosphate groups rotated to increase the oxygen coordination number of Lu from six to seven. This structure then became isostructural with the room-temperature form of the compound K 3 Yb(PO 4 ) 2 reported here that also exhibits an additional high-temperature phase which occurs at T = 120 °C with a transformation to hexagonal P-3 space group symmetry and a Yb-ion coordination number reduction from seven to six. This latter result was confirmed using EXAFS. The single-crystal growth methods structural systematics, and thermal expansion properties of the present series of alkali rare-earth double phosphates, as determined by X-ray and neutron diffraction methods, are treated here.

36 MATERIALS SCIENCE↗

X-ray absorption spectroscopy of trivalent Eu, Gd, Tb, and Dy chlorides and oxychlorides

Growing interest in next generation molten salt nuclear reactors necessitates a fundamental understanding of the chemical and physico-chemical properties of fission products, including elements of the lanthanide series. In this study, we probed coordination environment of Eu, Gd, Tb, and Dy in their chloride salts with both laboratory and synchrotron scale X-ray absorption spectroscopy (XAS). Here the aerobic melting was carried out with LnCl 3 ·nH 2 O, where Ln is Eu, Gd, Tb, and Dy, and yielded predominant formation of oxychlorides (LnOCl), that was confirmed by extended X-ray absorption fine structure (EXAFS) analysis and X-ray diffraction (XRD). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) computations were performed to obtain ground state structures, lattice parameters, and to simulate L 3 -edge XANES (X-ray absorption near edge structure) spectra of the LnCl 3 ·nH 2 O and LnOCl. A blue shift, initially predicted by our calculations, was also observed for the experimental Ln L 3 -edge XANES spectra of the hydrated trichlorides vs oxychlorides, highlighting the power of combining the predictive ability of theory with experiment to elucidate the properties of the compounds of interest. The blue shift is indicative of structural stabilization of LnCl 3 ·nH 2 O due to higher symmetry compared with LnOCl. To the best of knowledge, this is a first study providing the framework for fundamental insights into the structure of Ln trichlorides and oxychlorides in support of future characterization of lanthanides in the molten salt environment.

36 MATERIALS SCIENCE↗

Hydrogen and oxygen adsorption stoichiometries on silica supported ruthenium nanoparticles

Treatment under H{sub 2} at 300 C of Ru(COD)(COT) dispersed on silica yields 2 nm ruthenium nanoparticles, [Ru{sub p}/SiO{sub 2}], according to EXAFS, HRTEM and XPS. H{sub 2} adsorption measurements on [Ru{sub p}/SiO{sub 2}] in the absence of O{sub 2} show that Ru particles adsorb up to ca. 2 H per surface ruthenium atoms (2H/Ru{sub s}) on various samples; this technique can therefore be used to measure the dispersion of Ru particles. In contrast, O{sub 2} adsorption on [Ru{sub p}/SiO{sub 2}] leads to a partial oxidation of the bulk at 25 C, to RuO{sub 2} at 200 C and to sintering upon further reduction under H{sub 2}, showing that O{sub 2} adsorption cannot be used to measure the dispersion of Ru particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal Stability and Catalytic Activity of Gold Nanoparticles Supported on Silica

2.5 nm gold nanoparticles were grown on a fumed silica support, using the physical vapor deposition technique of magnetron sputtering, that are thermally stable when annealed in an oxygen containing environment up to at least 500 C. Traditional Au/TiO{sub 2} catalysts rapidly sinter to form large 13.9 nm gold clusters under these annealing conditions. This surprising stability of Au/SiO{sub 2} is attributed to the absence of residual impurities (ensured by the halide-free production method) and a strong bond between gold and defects at the silica surface (about 3 eV per bond) estimated from density functional theory (DFT) calculations. The Au/SiO{sub 2} catalysts are less active for CO oxidation than the prototypical Au/TiO2 catalysts, however they can be regenerated far more easily, allowing the activity of a catalyst to be fully recovered after deactivation.

36 MATERIALS SCIENCE↗

Oxidative dehydrogenation (ODH) of ethane with O[subscript 2] as oxidant on selected transition metal-loaded zeolites

Ni-, Cu-, and Fe-loaded acidic and basic Y zeolites were synthesized, and their catalytic properties for oxidative dehydrogenation of ethane (ODHE) to ethylene were characterized. Acidic Ni-loaded Y zeolite exhibits an ethylene productivity of up to 108 g{sub C{sub 2}H{sub 4}}g{sub cat}{sup -1} h{sup -1} with a selectivity of {approx}75%. Acidic Cu- and Fe-loaded Y zeolites have an ethylene productivity of up to 0.37 g{sub C{sub 2}H{sub 4}}g{sub cat}{sup -1} h{sup -1} and a selectivity of {approx}50%. For the same metal, the acidity of the zeolite favors both ODHE productivity and ethylene selectivity. Extended X-ray absorption fine structure (EXAFS) studies show that Ni, present in particles on Ni/HY during the ODHE catalytic process, contains both Ni-Ni and Ni-O bonds, and that the ratio of oxidized Ni versus metallic Ni increases with the temperature. The insights these studies provide into the ODHE reaction mechanism are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating Extent of Pt–Ni Bond Formation with Low-temperature Hydrogenation of Benzene and 1,3-butadiene over Supported Pt/Ni Bimetallic Catalysts

Low-temperature hydrogenation of benzene and 1,3-butadiene on supported Pt/Ni catalysts have been used as probe reactions to correlate hydrogenation activity with the extent of Pt-Ni bimetallic bond formation. Pt/Ni bimetallic and Pt and Ni monometallic catalysts were supported on {gamma}-Al{sub 2}O{sub 3} using incipient wetness impregnation. Two sets of bimetallic catalysts were synthesized: one set to study the effect of metal atomic ratio and the other to study the effect of impregnation sequence. Fourier transform infrared spectroscopy (FTIR) CO adsorption studies were performed to characterize the surface composition of the bimetallic nanoparticles, and transmission electron microscopy (TEM) was utilized to characterize the particle size distribution. Batch reactor studies with FTIR demonstrated that all bimetallic catalysts outperformed monometallic catalysts for both benzene and 1,3-butadiene hydrogenation. Within the two sets of bimetallic catalysts, it was found that catalysts with a smaller Pt:Ni ratio possessed higher hydrogenation activity and that catalysts synthesized using co-impregnation had greater activity than sequentially impregnated catalysts. Extended X-ray absorption fine structure (EXAFS) measurements were performed in order to verify the extent of Pt-Ni bimetallic bond formation, which was found to correlate with the hydrogenation activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic studies of the stability of Pt for No oxidation: effect of sulfur and long-term aging.

The stability of Pt catalysts for NO oxidation was analyzed by observing the effect of pre-adsorbed sulfur on the reaction kinetics using a series of Pt/SBA-15 catalysts with varying Pt particle sizes (ca 2-9 nm). Our results indicate that sulfur addition did not influence catalyst deactivation of any of the Pt catalysts, resulting in unchanged turnover rates (TOR) and reaction kinetics. The presence of sulfur on Pt was confirmed by X-ray absorption fine structure spectroscopy (EXAFS) under reducing environments. However, exposure of the catalyst to NO oxidation conditions displaced sulfur from the first coordination shell of Pt, yielding Pt-O bonds instead. Re-reduction fully recovered the Pt-S backscattering, implying that sulfur remained near the Pt under oxidizing conditions. X-ray photoelectron spectroscopy (XPS) and chemisorption measurements confirmed the presence of sulfur near platinum. The invariance of the NO oxidation reaction to sulfur poisoning is explained by sulfur displacement to interfacial sites and/or sulfur binding on kinetically irrelevant sites. Formation of Pt oxides remains as the main source of catalyst deactivation as observed by kinetic and X-ray absorption spectroscopy (XAS) measurements.

36 MATERIALS SCIENCE↗

Novel Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation

Catalysts for the dehydrogenation of light alkanes were prepared by dispersing Pt on the surface of a calcined hydrotalcite-like support containing indium, Mg(In)(Al)O. Upon reduction in H{sub 2} at temperatures above 673 K, bimetallic particles of PtIn are observed by TEM, which have an average diameter of 1 nm. Analysis of Pt LIII-edge extended X-ray absorption fine structure (EXAFS) data shows that the In content of the bimetallic particles increases with increasing bulk In/Pt ratio and reduction temperature. Pt LIII-edge X-ray absorption near edge structure (XANES) indicates that an increasing donation of electronic charge from In to Pt occurs with increasing In content in the PtIn particles. The activity and selectivity of the Pt/Mg(In)(Al)O catalysts for ethane and propane dehydrogenation reactions are strongly dependent on the bulk In/Pt ratio. For both reactants, maximum activity was achieved for a bulk In/Pt ratio of 0.48, and at this In/Pt ratio, the selectivity to alkene was nearly 100%. Coke deposition was observed after catalyst use for either ethane or propane dehydrogenation, and it was observed that the alloying of Pt with In greatly reduced the amount of coke deposited. Characterization of the deposit by Raman spectroscopy indicates that the coke is present as highly disordered graphite particles <30 nm in diameter. While the amount of coke deposited during ethane and propane dehydrogenation are comparable, the effects on activity are dependent on reactant composition. Coke deposition had no effect on ethane dehydrogenation activity, but caused a loss in propane dehydrogenation activity. This difference is attributed to the greater ease with which coke produced on the surface of PtIn nanoparticles migrates to the support during ethane dehydrogenation versus propane dehydrogenation.

01 COAL, LIGNITE, AND PEAT↗

Hydrodechlorination Catalysis of Pd-on-Au Nanoparticles Varies with Particle Size

The dependence of bimetallic PdAu catalytic activity on the relative ratios of Pd and Au has been theoretically predicted and experimentally observed for a number of reactions. Trichloroethene (TCE), a common carcinogenic solvent that is difficult to remove from contaminated groundwater in many industrialized nations, can be chemically degraded especially rapidly with Au nanoparticles partially coated with Pd ("Pd-on-Au NPs"). These NPs catalyze the room-temperature water-phase TCE hydrodechlorination (HDC) reaction with activities that follow a volcano-shape dependence on Pd surface coverage. The effect of particle size is not known, though. Pd-on-Au NPs synthesized with 3, 7, and 10 nm Au NPs and Pd surface coverages between 0 and 150% were studied in detail. Volcano-shape dependence on Au particle size and Pd surface coverage was observed, with 7 nm Au NPs with a Pd coverage of 60-70% having the highest TCE HDC activity. Extended x-ray absorption fine-structure spectroscopy (EXAFS) revealed the correlation was strongest between catalytic activity and the presence of non-oxidized Pd ensembles of ~2-3 atoms in contact with ~8-10 Au atoms. Isolated Pd atoms and Pd ensembles were visualized for the first time through aberration-corrected scanning transmission electron microscopy (STEM). This study provides the most direct evidence yet for Pd-on-Au NPs containing 2-dimensional Pd ensembles as the active sites for TCE HDC and likely for other chemical reactions. A portion of the research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. This research was supported by the Laboratory Directed Research and Development program at Pacific Northwest National Laboratory. The Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

catalysis↗

Correlating the degree of metal–promoter interaction to ethanol selectivity over MnRh/CNTs CO hydrogenation catalysts

Multi-walled carbon nanotubes (MCNTs) were used as a support for Rh-based catalysts for high pressure (20 bar) CO hydrogenation. 3 wt% Rh/CNTs catalysts were loaded with 1 wt% and 2 wt% Mn promoter, respectively, in order to study the effect of metal–promoter interactions for ethanol synthesis. Both STEM and EXAFS results showed ≈1 nm Rh particles in promoted as well as the unpromoted catalysts, STEM and EELS results verified the enhanced metal–promoter interaction when the amount of Mn promoter increased from 1 wt% to 2 wt%. The enhancement in the degree of metal–promoter interaction leads to an increase in the ethanol selectivity. Moreover, due to the nature of CNTs (low Z number), the Mn–Rh interactions could be observed at atomic resolution during the STEM–EELS characterization, and the promoter phase is confirmed as Mn(II) oxide by XANES and EELS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nitrogen-doped carbon for selective pseudo-metal-free hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran: Importance of trace iron impurity

Heteroatoms-doped carbon materials have recently emerged as effective catalysts for various chemical and electrochemical reactions. The free of metals especially noble metals reduces cost and eliminates issues like sintering or leaching of metals at elevated temperatures in solvents. In this work, selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is for the first time achieved over simple nitrogen-doped carbon (N-C) catalysts. Further, at optimal reaction conditions, a 91% yield of DMF is obtained with excellent catalyst stability. Extensive characterization, including extended X-ray absorption fine-structure (EXAFS) and soft X-ray absorption spectroscopy (sXAS), model reactions, basic data science analysis, and DFT calculations suggest that ppm of Fe in particular FeN 3 sites formed in pyrolysis, rather than non-metallic elements, drive key steps such as H 2 activation and deoxygenation of –OH during HMF HDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗