SEARCH · Engineering Papers

Results for “Diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Studies of the role of metastables and doubly ionized species in the chemical and thermal structure of the Venusian and Martian ionospheres

Models of the upper atmospheres of Mars and Venus were constructed using Viking and Pioneer Venus data. The neutral densities, with the exception of NO, N(4S), N(2D) and N(2P) were taken from the measured values, along with the neutral, ion, and electron temperatures. Using solar fluxes and relevant cross sections, the production rates of ions and neutral fragments by photo and electron impact processes were computed. These production rates were combined with chemical production rates and loss along with one dimensional transport eddy diffusion, molecular and ambi polar diffusion, and thermal diffusion, to determine the densities of ions and odd nitrogen species. Preliminary calculations show that the chemistry of metastables and doubly ionized species is important in the ionospheres of Mars and Venus. Production of N(+) in metastable reactions is particularly important, and it explains the discrepancy between the measurements of earlier models. Production of CO(+) is also affected. Reactions of O(++) and O(+)(2D) with N2 have important consequences for the escape rate of atomic nitrogen from the Martian atmosphere.

Fox, J. L.↗

NASA NTRS1982

Model calculations of the molecular composition of interstellar grain mantles

A chemical reaction scheme comprising gas phase as well as grain surface reactions is used for the numerical calculation of the chemical composition of mantles accreting on interstellar grains. The composition of the growing grain mantle is determined on the basis of the relative accretion rates of the gas phase molecules and diffusion-controlled surface reactions. Results show that grain mantles generally consist of the molecules H2O, H2CO, N2, O2, CO, CO2, H2O2, and NH3. A detailed examination of the formation of H2 on grain surfaces leads to the conclusion that it proceeds through hydrogen abstraction from such molecules as H2CO, H2S, N2H2, and N2H4. The IR characteristics of the calculated grain mantles are discussed with emphasis on the observed ice band at the 3250/cm wavelength.

Tielens, A. G. G. M.↗

NASA NTRS1990

The goals of gamma-ray spectroscopy in high energy astrophysics

The use of high resolution gamma-ray spectroscopy in astrophysics is discussed with specific attention given to the application of the Nuclear Astrophysics Explorer (NAE). The gamma-ray lines from nuclear transitions in radionucleic decay and positron annihilation permits the study of current sites, rates and models of nucleosynthesis, and galactic structure. Diffuse galactic emission is discussed, and the high-resolution observations of gamma-ray lines from discrete sites are also described. Interstellar mixing and elemental abundances can also be inferred from high-resolution gamma-ray spectroscopy of nucleosynthetic products. Compact objects can also be examined by means of gamma-ray emissions, allowing better understanding of neutron stars and the accreting black hole near the galactic center. Solar physics can also be investigated by examining such features as solar-flare particle acceleration and atmospheric abundances.

Lingenfelter, Richard E.↗

NASA NTRS1991

Aerodynamic and gasdynamic effects in cosmogony

An improved numerical code was constructed to model coagulation and settling of particles in disk nebula containing generic turbulence with arbitrary velocities in the gas. The turbulence is assumed to have a Kolmogorov eddy spectrum. Relative velocities of particles, which lead to collisions and possible coagulation, are computed as due all significant causes in their appropriate regimes: thermal motion, shear and inertial effects in turbulent eddies, and systematic motions due to settling and non-keplerian rotation of the gas. Significant improvements to this program were produced. One significant problem was the disparity of timescales for turbulent mixing and coagulation. To accurately compute the former, the timestep must be shorter than the smallest spatial scale (layer thickness) divided by the turbulent velocity. However, the size distribution often varies due to coagulation on much longer timescales. To minimize the computational overhead associated with collisions between particles of all sizes, a dual timestep was introduced. Collisional changes in the size distribution are computed once in every N substeps, where the substep is controlled by the turbulent diffusion velocity, and N is determined by the rate of collisions. This algorithm allowed simulations to be extended to longer times and later stages.

Weidenschilling, S. J.↗

NASA NTRS1991

Thermal imaging of graphite/epoxy composite samples with fabricated defects

Consideration is given to a thermal inspection system for quickly inspecting large area composites for increased reliability and maintainability of helicopters resulting from improved quality assurance manufacturing. The infrared camera/image processor-based inspection system was used to image defects in composites. Noncontacting and single-sided measurements were performed on graphite/epoxy samples with fiber volume fraction variations, fabricated porosity, impact damage, and inclusions in incurred lay ups. These defects were imaged by determining the variations in the cooling rates caused by differences in through ply thermal diffusivity. Attention is also given to the system's sensitivity to measuring the defects due to sample thickness.

Zalameda, Joseph N.↗

NASA NTRS1991

High performance etchant for thinning p(+)-InP and its application to p(+)n InP solar cell fabrication

An etchant, namely (o-H3PO4)u: (HNO3)v: (H2O2)t: (H2O)1-(u+v+t) is developed for thinning, after contacting, the p(+) emitter layer of p(+)n InP structures made by thermal diffusion. Varying u, v, and t, reproducible etch rates of 5 to 110 nm/min are obtained. After thinning the 0.6- to 2.5-micron thick p(+) InP layer down to 60-250 nm, specular surfaces are obtained at up to 80 nm/min etch rate. Due to its intrinsic qualities the resisual P-rich oxide after thinning the emitter layer provides surface passivation of p(+) InP surfaces and can also serve as a first-layer AR coating.

Faur, Maria↗

NASA NTRS1993

On the structure of gaseous confined laminar diffusion flames: Numerical investigation

The structure and characteristics of gaseous confined laminar diffusion flames are investigated by numerically solving the time-dependent two-dimensional axisymmetric conservation equations. The numerical model accounts for the important chemical and physical processes involved, including axial diffusion, viscous effects, radial convection, and finite-rate chemistry. The numerical results clearly show that the flame has a finite thickness and leakage of fuel vapor into the flame zone is possible. The effect of heat release is found to induce some radial flow. Predicted flame shape and dimensions are compared to the classical Burke-Schumann flame. The numerically calculated flame is observed to be about 15 percent taller and 5 percent narrower than that of the Burke-Schumann solution under the same conditions.

Mawid, M. A.↗

NASA NTRS1992

Experimental investigation of carbonate formation on Mars

If Mars had an early dense CO2 atmosphere (greater than 1 bar), then the transition to the present low pressure (7 mbar) may require carbonate formation without liquid water (e.g., although the early greenhouse has been questioned on the basis that modeled CO2 condensation prevents buildup of such a pressure). Our experiments have focused on the kinetics of such 'dry' reactions. Booth and Kieffer suggested rates consistent with removal of greater than 1 bar of CO2 over geologic time, but their results were questionable since their reactions did not proceed beyond one monolayer of carbonate formed on powdered silicate under martian conditions. Theoretical considerations implied that if nonporous rinds formed, then the rate of carbonate formation would be limited by diffusion, not reaction. Therefore, our experiments optimize reaction conditions to test for continued carbonate production, as well as to verify previous conclusions for initial growth of carbonate.

Stephens, Stuart K.↗

NASA NTRS1954

The structure of turbulence in fully developed pipe flow

Measurements, principally with a hot-wire anemometer, were made in fully developed turbulent flow in a 10-inch pipe at speeds of approximately 10 and 100 feet per second. Emphasis was placed on turbulence and conditions near the wall. The results include relevant mean and statistical quantities, such as Reynolds stresses, triple correlations, turbulent dissipation, and energy spectra. It is shown that rates of turbulent-energy production, dissipation, and diffusion have sharp maximums near the edge of the laminar sublayer and that there exist a strong movement of kinetic energy away from this point and an equally strong movement of pressure energy toward it.

Laufer, John↗

NASA NTRS2000

Effects of Structure and Hydrodynamics on the Sooting Behavior of Spherical Microgravity Diffusion Flames

We have examined the sooting behavior of spherical microgravity diffusion flames burning ethylene at atmospheric pressure in the NASA Glenn 2.2-second drop tower. In a novel application of microgravity, spherical flames allowed convection across the flame to be either from fuel to oxidizer or from oxidizer to fuel. Thus, microgravity flames are uniquely capable of allowing independent variation of convection direction across the flame and stoichiometric mixture fraction, Z(sub st). This allowed us to determine the dominant mechanism responsible for the phenomenon of permanently-blue diffusion flames -- flames that remain blue as strain rate approaches zero. Stoichiometric mixture fraction was varied by changing inert concentrations such that adiabatic flame temperature did not change. At low and high Z(sub st) nitrogen was supplied with the oxidizer and the fuel, respectively. For the present flames, structure (Z(sub st)) was found to have a profound effect on soot production. Soot-free conditions were observed at high Z(sub st) (Z(sub st) = 0.78) and sooting conditions were observed at low Z(sub st) (Z(sub st) = 0.064) regardless of the direction of convection. Convection direction was found to have a lesser impact on soot inception, with formation being suppressed when convection at the flame sheet was directed towards the oxidizer.

Sunderland, P. B.↗

NASA NTRS2000

Continuous Processing With Mars Gases

Current Martian missions call for the production of oxygen for breathing, and fuel and oxygen for propulsion to be produced from atmospheric carbon dioxide (CO2). Adsorption and freezing are the two methods considered for capturing CO2 from the atmosphere. However, the nitrogen (N2) and argon (Ar), which make up less than 5 percent of the atmosphere, cause difficulties with both of these processes by blocking the CO2. This results in the capture process rapidly changing from a pressure driven process to a diffusion controlled process. To increase the CO2 capture rates, some type of mechanical pump is usually proposed to remove the N2 and Ar. The N2 and Ar are useful and have been proposed for blanketing and pressurizing fuel tanks and as buffer gas for breathing air for manned missions. Separation of the Martian gases with the required purity can be accomplished with a combination of membranes. These membrane systems do not require a high feed pressure and provide suitable separation. Therefore, by use of the appropriate membrane combination with the Martian atmosphere supplied by a compressor a continuous Supply Of CO2 for fuel and oxygen production can be supplied. This phase of our program has focused on the selection of the membrane system. Since permeation data for membranes did not exist for Martian atmospheric pressures and temperatures, this information had to be compiled. The general trend as the temperature was lowered was for the membranes to become more selective. In addition, the relative permeation rates between the three gases changed with temperature. The end result was to provide design parameters that could be used to separate CO2 from N2 and Ar. This paper will present the membrane data, provide the design requirements for a compressor, and compare the results with adsorption and freezer methods.

Parrish, Clyde↗

NASA NTRS2001

Continuous Processing with Mars Gases

Current Martian missions call for the production of oxygen for breathing, and fuel and oxygen for propulsion to be produced from atmospheric carbon dioxide (CO2). Adsorption and freezing are the two methods considered for capturing CO, from the atmosphere. However, the nitrogen (N2) and argon (Ar), which make up less than 5 percent of the atmosphere, cause difficulties with both of these processes by blocking the CO2, This results in the capture process rapidly changing from a pressure driven process to a diffusion controlled process. To increase the CO, capture rates, some type of mechanical pump is usually proposed to remove the N2 and Ar. The N2 and Ar are useful and have been proposed for blanketing and pressurizing fuel tanks and as buffer gas for breathing air for manned missions. Separation of the Martian gases with the required purity can be accomplished with a combination of membranes. These membrane systems do not require a high feed pressure and provide suitable separation. Therefore, by use of the appropriate membrane combination with the Martian atmosphere supplied by a compressor a continuous supply of CO2 for fuel and oxygen production can be supplied. This phase of our program has focused on the selection of the membrane system. Since permeation data for membranes did not exist for Martian atmospheric pressures and temperatures, this information had to be compiled. The general trend as the temperature was lowered was for the membranes to become more selective. In addition, the relative permeation rates between the three gases changed with temperature. The end result was to provide design parameters that could be used to separate CO2 from N2 and Ar. This paper will present the membrane data, provide the design requirements for a compressor, and compare the results with adsorption and freezer methods.

Parrish, Clyde↗

NASA NTRS1996

Haze Formation is an Important Sink for HCN on Titan

Titan's organic haze is potentially an important sink of photochemically produced carbon and nitrogen compounds. An assortment of microphysical haze models all suggest that the haze production rate is 10(exp -14) gm per square centimeter per second, within a factor of two. Spectral analysis of laboratory tholins compared to Titan's geometric albedo spectrum suggest that the laboratory material is a good analog to Titan's haze. The laboratory material has an elemental composition given approximately by C4H4N, with an uncertainty in the C/N ratio of a factor of two. Thus, the haze represents a sink for C of 4 x 10(exp 8) per square centimeter per second, and a sink for N of 1 x 10(exp 8) per square centimeter per second. The C sink is small compared to condensation of hydrocarbons but the sink for N is comparable to the total production rate of HCN. Because estimates of the eddy diffusion profile on Titan have been based on the HCN profile, inclusion of this additional sink for N will affect estimates for all transport processes in Titan's atmosphere.

McKay, Christopher P.↗

NASA NTRS1999

Development of a Computational Chemical Vapor Deposition Model: Applications to Indium Nitride and Dicyanovinylaniline

A computational chemical vapor deposition (CVD) model is presented, that couples chemical reaction mechanisms with fluid dynamic simulations for vapor deposition experiments. The chemical properties of the systems under investigation are evaluated using quantum, molecular and statistical mechanics models. The fluid dynamic computations are performed using the CFD-ACE program, which can simulate multispecies transport, heat and mass transfer, gas phase chemistry, chemistry of adsorbed species, pulsed reactant flow and variable gravity conditions. Two experimental setups are being studied, in order to fabricate films of: (a) indium nitride (InN) from the gas or surface phase reaction of trimethylindium and ammonia; and (b) 4-(1,1)dicyanovinyl-dimethylaminoaniline (DCVA) by vapor deposition. Modeling of these setups requires knowledge of three groups of properties: thermodynamic properties (heat capacity), transport properties (diffusion, viscosity, and thermal conductivity), and kinetic properties (rate constants for all possible elementary chemical reactions). These properties are evaluated using computational methods whenever experimental data is not available for the species or for the elementary reactions. The chemical vapor deposition model is applied to InN and DCVA. Several possible InN mechanisms are proposed and analyzed. The CVD model simulations of InN show that the deposition rate of InN is more efficient when pulsing chemistry is used under conditions of high pressure and microgravity. An analysis of the chemical properties of DCVA show that DCVA dimers may form under certain conditions of physical vapor transport. CVD simulations of the DCVA system suggest that deposition of the DCVA dimer may play a small role in the film and crystal growth processes.

Cardelino, Carlos↗

NASA NTRS1997

The Properties and Effects of Titan's Organic Haze

Titan's organic haze is the the dominant absorber of solar energy in Titan's atmosphere, creating an anti-greenhouse effect. Its variation over time may have had important implications for Titan's surface temperature. The haze is potentially an important sink of photochemically produced carbon and nitrogen compounds. Laboratory simulations and microphysical models suggest that the haze is a sink for C of 4 x 10(exp 8)/ sq cm s, and a sink for N of 1 x 10(exp 8)sq cm s. The C sink is small compared to condensation of hydrocarbons but the sink for N is comparable to the total production rate of HCN. Because estimates of the eddy diffusion profile on Titan have been based on the HCN profile, inclusion of this additional sink for N will affect estimates for all transport processes in Titan's atmosphere.

McKay, Christopher P.↗

NASA NTRS2004

Microgravity Studies of Liquid-Liquid Phase Transitions in Alumina-Yttria Melts

The scientific objective of this research is to increase the fundamental knowledge base for liquid- phase processing of technologically important oxide materials. The experimental objective is to define conditions and hardware requirements for microgravity flight experiments to test and expand the experimental hypotheses that: 1. Liquid phase transitions can occur in undercooled melts by a diffusionless process. 2. Onset of the liquid phase transition is accompanied by a large change in the temperature dependence of melt viscosity. Experiments on undercooled YAG (Y3A15012)- and rare earth oxide aluminate composition liquids demonstrated a large departure from an Arrhenian temperature dependence of viscosity. Liquid YAG is nearly inviscid at its 2240 K melting point. Glass fibers were pulled from melts undercooled by ca. 600 K indicating that the viscosity is on the order of 100 Pans (1000 Poise) at 1600 K. This value of viscosity is 500 times greater than that obtained by extrapolation of data for temperatures above the melting point of YAG. These results show that the liquids are extremely fragile and that the onset of the highly non-Arrhenian viscosity-temperature relationship occurs at a temperature considerably below the equilibrium melting point of the solid phases. Further results on undercooled alumina-yttria melts containing 23-42 mole % yttrium oxide indicate that a congruent liquid-liquid phase transition occurs in the undercooled liquids. The rates of transition are inconsistent with a diffusion-limited process. This research is directed to investigation of the scientifically interesting phenomena of polyamorphism and fragility in undercooled rare earth oxide aluminum oxide liquids. The results bear on the technologically important problem of producing high value rare earth-based optical materials.

Guynes, Buddy↗

NASA NTRS1998

Regulation of skeletal muscle perfusion during exercise

For exercise to be sustained, it is essential that adequate blood flow be provided to skeletal muscle. The local vascular control mechanisms involved in regulating muscle perfusion during exercise include metabolic control, endothelium-mediated control, propagated responses, myogenic control, and the muscle pump. The primary determinant of muscle perfusion during sustained exercise is the metabolic rate of the muscle. Metabolites from contracting muscle diffuse to resistance arterioles and act directly to induce vasodilation, or indirectly to inhibit noradrenaline release from sympathetic nerve endings and oppose alpha-adrenoreceptor-mediated vasoconstriction. The vascular endothelium also releases vasodilator substances (e.g., prostacyclin and nitric oxide) that are prominent in establishing basal vascular tone, but these substances do not appear to contribute to the exercise hyperemia in muscle. Endothelial and smooth muscle cells may also be involved in propagating vasodilator signals along arterioles to parent and daughter vessels. Myogenic autoregulation does not appear to be involved in the exercise hyperemia in muscle, but the rhythmic propulsion of blood from skeletal muscle veins facilitates venous return to the heart and muscle perfusion. It appears that the primary determinants of sustained exercise hyperemia in skeletal muscle are metabolic vasodilation and increased vascular conductance via the muscle pump. Additionally, sympathetic neural control is important in regulating muscle blood flow during exercise.

Non-NASA Center↗

NASA NTRS1995

The regulation of methane oxidation in soil

The atmospheric concentration of methane, a greenhouse gas, has more than doubled during the past 200 years. Consequently, identifying the factors influencing the flux of methane into the atmosphere is becoming increasingly important. Methanotrophs, microaerophilic organisms widespread in aerobic soils and sediments, oxidize methane to derive energy and carbon for biomass. In so doing, they play an important role in mitigating the flux of methane into the atmosphere. Several physico-chemical factors influence rates of methane oxidation in soil, including soil diffusivity; water potential; and levels of oxygen, methane, ammonium, nitrate, nitrite, and copper. Most of these factors exert their influence through interactions with methane monooxygenase (MMO), the enzyme that catalyzes the reaction converting methane to methanol, the first step in methane oxidation. Although biological factors such as competition and predation undoubtedly play a role in regulating the methanotroph population in soils, and thereby limit the amount of methane consumed by methanotrophs, the significance of these factors is unknown. Obtaining a better understanding of the ecology of methanotrophs will help elucidate the mechanisms that regulate soil methane oxidation.

Review, Academic↗